wmw karl marx used for sale

Shell end mills, shell mills, milling cutters -Number: 8 pieces finishing cutter/roughing cutter -Socket: Ø 40 mm -Various diameters: 120-125 mm -Different producers -Price: complete -Weight: 22 kg

Cutter mandrel , tool holder, with tightening thread WMW 4 x 25 x 80 ( 4x25x80 ) TGL 30-4113 MK4 shaft diameter: Ø 16 mm Tool holder: Ø 25 mm New ! Dimensions: 300 x 45 x 45 mm

Shell end mills, shell mills, milling cutters -Number: 18 pieces finishing cutter/roughing cutter -Socket: Ø 40 mm -Various diameters: 100-125 mm -Different producers -Price: complete -Weight: 57.6 kg

Shell end mills, shell mills, milling cutters -Number: 9 pieces finishing cutter/roughing cutter -Socket: Ø 32 mm -Various diameters: 76-100 mm -Different producers -Price: complete -Weight: 13.3 kg

Shell end mills, shell mills, milling cutters -Number: 12 pieces finishing cutter/roughing cutter -Socket: Ø 32 mm -Various diameters: 75-110 mm -Different producers -Price: complete -Weight: 21.3 kg

Shell end mills, shell mills, milling cutters -Number: 28 pieces finishing cutter/roughing cutter -Socket: Ø 22 mm -Various diameters: 49-80 mm -Different producers -Price: complete -Weight: 10.5 kg

Milling cutter mandrel, tool holder, with tightening thread WMW 3 x 25 x 160 ( 3x25x160 ) TGL 30-4113 MK3 shaft diameter: Ø 20 mm Tool holder: Ø 25 mm New ! Dimensions: 425 x 45 x 45 mm

Key data: 50 mm, 335 mm, 280 mm

Power: 7.8 kW Weight: 1,650 kg Table size: 630 x 500 Speed: 45 - 1,000 rpm Machine is ready for operation and can be dispensed immediately.

Machine vice, vice, drill press vice -Jaw width: 155 mm -Back height: 80 mm Clamping depth: max. 200 mm -Dimensions: mm -Weight: 35 kg

Tool holder, milling holder, milling tool -Number: 58x SK40 mounts -different designs -partly with pull studs -Spindle tools: different diameters -Sale: only complete -Weight: 108 kg

Machine vice, vise, drill press vise -Jaw width: 160 mm -Jaw height: 50 mm -Clamping depth: max. 105 mm -Dimensions: 460/163/H123 mm -Weight: 38.3 kg

Bohrleistung in Stahl (-Ø: 45 mm throat: 1250 mm workpiece height max.: 1100 mm swival range +/-: 360 ° height adjustment: 745 mm base plate surface area: 1450 x 920 mm Bohrspindel-Ø/ Aufnahme: 90 mm / MK 5 bore spindle stroke: 355 mm max. torque on the spindle: 250 Nm feed power: 14000 N turning speed range: 20 - 1200 U/min feed range: 0,063 - 0,63 mm/U drilling capacity steel/cast iron: mm power capacity: 3,7 kW weight of the machine ca.: 3,0 t dimensions of the machine ca.: 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, • coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Profile steel shears, hand lever shears, hand sheet metal shears, sheet metal shears, sheet metal shears -Scissors: 185 mm -cutting: 40 mm angle iron -cutting: Ø mm round steel -Dimensions: 460/985/H2220 mm -Weight: 88 kg

Tool holder, milling holder, milling tool -Quantity: 4x recording SK40 -1x Ø: 16 x 19 mm -1x Ø: 16 x 25 mm -1x Ø: 27 x 25 mm -1x: drill chuck - is only sold complete -Weight: 6kg

Collet chuck, tool holder, tool holder, milling chuck, milling tool -Recording: Ø 32 -Clamping sleeves: 4/6/10/12/14 mm -Price/Sale: complete -Total weight: 1 kg

Three-jaw chuck, three-jaw lathe chuck -Clamping plate -Mouth size: Ø 160 mm -Quantity: 2x food available Price: per piece -Weight: 7 kg

FZWD 160x1600/1 Sabo Basis 160 Facing & Centering Machine WMW HECKERT Workpiece dia 20-160 mm Length 130-1600 mm Max. Diameter of Milling Cutter 200 mm Facing Spindle's Speeds 112-280 rpm Spindle's Speeds 560-1400 rpm Adjustable feed rate range 15 – 800 mm / min. Spindle ISO 50 Rapid traverse 6000 mm Max. stroke 230 mm Max. Depth of 6 mm Tool holder 4 - 20 mm Max. Feed path 60 mm Total connected load 20 kW Weight 4.5 t

Three-jaw chuck, three-jaw lathe chuck -DH200x3-III -TGL: 30-2332 -Mouth size: Ø 200 mm -Recess: Ø 155 mm -Bolt circle: Ø 174 mm -Through hole: Ø 57 mm -Weight: 12 kg

live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Manufacturer: WMW, live centering tip, 2 pieces -Type: ZN 205 -Recording: MK5 -Price/Sale: complete -Overall dimensions: 270/190/100 mm -Weight: 10 kg

Shell cutters, shell cutters, milling cutters, shell-type milling cutters -Manufacturer: WMW, shell mill -Inside: Ø 32/14 mm -Dimension: Ø 96 x 47 mm -Weight: 1.5 kg

max. wheel diameter: 400 mm gear width: 275 mm gear width: 275 mm max. module: 6 weight of the machine ca.: 5,5 t shifting: 100 mm dist. cutter spindle - workpiece spindle: 40/265 mm hob turning speeds: 50-400 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- C-Frame construction - Die height 850 mm - Thickness bolster plate 100 mm - Throath C Side 360 mm -  

fixed point, fixed center point, fixed morse taper, fixed centering point, centering points -Manufacturer: WMW ABW, fixed center point -Adjustment: Morse taper MK5 -Number: 9x center points available -Price per piece -Dimensions: Ø 46/200 mm -Weight: 1.9 kg / pc.

Tapping chucks, thread chucks, tapping chucks, milling tools, tapping attachments -Manufacturer: WMW ABW, tapping chuck holder MK2 with 5 pieces of holders -Type: GB2 M5 - M16 -Dimension: O 62 x 192 mm -Weight: 1.8 kg

fixed center, fixed live center, fixed morse taper, fixed center, center -Manufacturer: WMW ABW, fixed center point -Intake: Morse taper MK4 -Number: 17x centering tips available -Price per piece -Dimension: Ø 33/160 mm -Weight: 0.8 kg/pc.

WMW Union BFT 80/2 X: 1000 - Y: 1000 - Z: 1600mm Spindle Dia: 80 mm Spindle bore: ISO 50 Table dimensions : 1100 x 1000 mm Table longitudinal travel (X-axis): 1000 mm Cross travel Table/colom (Y-axis): 1000 mm Height travel head (Z-axis): 1600 mm Max travel spindle: 700 mm Power on spindle: 1250 rpm Power principal motor: 8,5 kW Weight: 11 ton

Heckert CWK 400 Built in 1995 Control Siemens 840 Travel X/Y/Z 650/650/680 mm Spindle speed up to 10,000 rpm HSK 40 Tool Changer Rotary table 400 x 500 mm, Conveyor Weight 12.5 t.

fixed center, fixed live center, fixed morse taper, fixed center, center -Manufacturer: WMW ABW, fixed center point flattened -Intake: Morse taper MK5 -Number: 1x centering tips available -Price per piece -Dimensions: Ø 46/200 mm -Weight: 1.8 kg/pc.

Single-column eccentric press AMBOLD type PEEV 25.2Masch. No. 11734 / 02 Year of construction 2002Compressive force 25 ton. Projection 200 mmTable area 520 x 400 mmPlunger area 155 x 155 mmHole in table 185 x 155 mmStroke adjustment 4-80 mmPlunger adjustment 40 mmInstallation height max. 270 (largest stroke in UT, table below)Clamping pin hole 32 mmTable height adjustment approx. 150 mmPlunger strokes 160 strokes/min. Motor power 2.2 kWNet connection 400 volts, 50 Hz pneumatic clutch-brake combination

fixed center, fixed live center, fixed morse taper, fixed center, center -Manufacturer: WMW ABW, fixed center point -Intake: Morse taper MK3 -Number: 12x centering tips available -Price per piece -Dimension: Ø 25/125 mm -Weight: 0.3 kg/pc.

live center, live center, live morse taper, live center, live lathe center, live center -Manufacturer: WMW ABW Live center -Type: ZN 203 -Intake: MK3 -Number: 11x center point available -Price per piece -Total dimensions: Ø 54 x 167 mm -Weight: 0.9 kg/pc.

face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW, face driver -Type: MS2 / MS2a -Recording: MK2 -Quantity: Front dimension 4x Ø 22 mm / 3x Ø 25 mm -Price: per piece

Drilling capacity in steel/cast iron: 40mm/60mm, throat depth range: 300mm-1250mm, max. workpiece height: 745mm, spindle mount: MK5, spindle stroke: 355mm, speed: 1200rpm, feed: 756mm/min, column diameter: 300mm, spindle-plate distance: 280mm-1380mm, table dimensions X/Y: 1400mm/750mm. Machine dimensions X/Y/Z: approx. 2200mm/1000mm/2800mm, weight: approx. 3000kg. On-site inspection is possible.

Radial drilling machine BR 56 x 1600 Year of construction: approx. 1965 (estimate) equipped with coolant device and drilling table as optional accessories

Face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW Rapid, face driver -Type: MS4 / Rapid4 -Recording: MK4 -Quantity: 4 pieces available -Price: per piece -Front dimension: Ø 46 mm

Drilling capacity in steel: 50mm, spindle mount: MK5, speed: 1000rpm, throat depth: 355mm, drilling stroke: 280mm, spindle-table distance: 710mm, spindle-column distance: 355mm, table dimensions X/Y: 630mm/500mm, column diameter: 160mm. Machine dimensions X/Y/Z: 1200mm/800mm/2700mm, weight: approx. 1650kg. On-site inspection is possible.

pressure: 12 t distance between columns: / mm dayligth: / mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

fixed point, fixed center point, fixed Morse taper, fixed center point, center points -Fixed centering tip: Ø 65 mm -Mount: Cone Ø 30/35 x 64 mm -Number: 3x centering tips available -Price: per piece -Dimensions: Ø 65 x 130 mm -Weight: 1.2 kg/pc.

Travel X/Y/Z: 820mm/300mm/485mm, table dimensions X/Y: 250mm/1000mm, spindle mount: SK40, speed: 2800rpm, spindle head swivel: +/-45°, quill stroke: 100mm, feed: 630mm/min, connected load: 9.5kW, machine weight: approx. 1600kg. Documentation available. On-site inspection is possible.

Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, spindle tool -Spindle head: Spindle tool for table boring mills, plate boring mills, tilt adjustable -Stroke: 225 mm -Shaft: Ø 50 mm -Dimensions: 330/170/H415 mm -Weight: 48 kg

Internal micrometers, micrometer screw, internal diameter, internal precision measuring device, cylinder gauge, -Measuring range: 35-60mm -Dimensions: 115/450/H60 mm -Weight 1.6kg

Shell end milling cutters, milling cutters, milling cutters, shell milling cutters -Manufacturer: WMW, shell milling cutter, milling cutter type N 9960 -Size: 160x63x50mm -Receptacle: Ø 50 mm -Dimensions of box: 175/175/H100 mm -Weight: 5.9 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW ABW, tapping chuck holder MK3 -Type: GB3 -Bore: Ø 24 mm -Dimensions: Ø 80 x 264 mm -Weight: 3.7 kg

A total of four WMW/Werkö saw grinding machines are available. Saw blade diameter min./max.: 250mm/1450mm, grinding wheel diameter: 250mm, speed: 2500rpm, tooth pitch: 42mm, grinding spindle swivel range: +/-45°, machine dimensions X/Y/Z: approx. 850mm/1000mm/1800mm, weight: approx. 1100kg. Documentation available. On-site inspection is possible.

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW, tapping chuck holder MK2 -Type: A2 MK2 -Bore: Ø 12 mm -Dimensions: Ø 70 x 267 mm -Weight: 3.3 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW, tapping chuck holder MK2 -Type: A2 MK2 -Bore: Ø 13 mm -Dimensions: Ø 70 x 267 mm -Weight: 3.3 kg

face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW, face driver -Type: MS5 -Front dimension: Ø 63 mm -Recording: see photos -Total dimensions: Ø 80 x 235 mm -Weight: 3.5 kg

Sanding width: 200mm, sanding length: 600mm, adjustment path X/Y: 690mm/230mm, clamping table spindle center distance: 500mm, sanding wheel diameter: 200mm, sanding wheel width: 20mm, bore: 51mm, table dimensions X/Y: 200mm/600mm, max. table load: 110kp, machine dimensions X/Y/Z: approx. 3000mm/1600mm/2100mm, weight: approx. 1300kg. Documentation available. On-site inspection is possible.

Eccentric press PEE I 250, in working conditon.

face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW, face driver -Type: MS5 -Front dimension: Ø 65 mm -Number: 7x centering tips available -Price: per piece -Recording: see photos -Total dimensions: Ø 74 x 220 mm -Weight: 2.9 kg/piece