wmw gotha used for sale

pressure: 100 t distance between columns: 400 mm stroke: 20 - 140 mm table surface area: 900 x 710 mm ram surface: 560 x 450 mm ram adjustment: 80 mm dayligth: 470 mm no. of strokes: 70 Hub/min total power requirement: 10,5 kW weight of the machine ca.: 9 t dimensions of machine L x W x H: 1,98 x 1,60 x 3,10 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8986 Type: DH-250/4 Producer: WMW Created: 1983 Parameters: Length: 3400 mm Width: 2100 mm Height: 1600 mm Weight: 4800 kg

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 7 mm -Number of teeth: 176 Z -Inside: Ø 80 mm -Bolt circle: Ø 120 x 22 mm -Number: 7x saw blades available -Price: per piece -Weight: 10.4 kg/piece

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 7 mm -Number of teeth: 264 teeth -Inside: Ø 80 mm -Bolt circle: Ø 120 x 22 mm -Quantity: 1x saw blade available -Weight: 10.3 kg

workpiece diameter: - mm workpiece weight: - kg workpiece height: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Boring spindle diameter: 130mm, tool holder: SK50, centering: 500mm, travel X/Y/Z: 250mm/160mm/380mm, travel W/U: 1000mm/320mm, feed rate: 2m/min, rapid traverse: 5m/min, max. diameter drilling/facing: 800mm/1400mm, torque boring spindle/facing support: 3100Nm/6150Nm, clamping plate dimensions X/Y/Z: 3500mm/1750mm/350mm, weight: approx. 30000kg, controls: Bosch. Including angle head, extension piece, steep taper tool holder for SK50 (without tools), 4x plate fields with the dimensions 1080mm/2000mm and boring apparatus. Documentation available. An inspection on site is possible.

Facing and Centering machine WMW FZWD 600x900.

Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: WMW ABW, thread cutting chuck holder MK3 -Type: GB3 -Dimensions: Ø 80 x 262 mm -Weight: 3.3 kg

Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine, milling machine-horizontal -Manufacturer: WMW, counter bearing from milling machine -Dimensions: see drawing in the photos -Dimensions: 295/76/H125 mm -Weight: 6.5 kg

Machine vice, sturdy vice, drill press vice -Machine vice: Clamping jaws 200 x 55 mm -Clamping depth: 285 mm -Dimensions: 650/200/H145 mm -Weight: 65.8 kg

turning speed range: 2,24 – 224 U/min total power requirement: 55 kW weight of the machine ca.: 16 t faceplate diameter: 1250 mm - Face plate diameter: 1.250 mm - Peak height above foundation slab: 1.250 mm - Max. torque on the face plate: 31,500 Nm - Largest workpiece: 16.000 Kg - Speed range: 2.24 - 224rpm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t stroke rate in continuous stroke: 90 min force: 2200 Nm Torque: 12500 Nm no. of strokes: 56 / 90 Hub/min Labour performance: 5,5 kW sheet thickness - max.: 6,3 / 3,2 mm cutting surface: 1600 mm² distance between columns: 320 mm throat: 315 mm min. ram stroke: 8 mm max. ram stroke: 120 mm ram adjustment: 70 mm ram surface: 400 x 500 mm tool hole in ram: 40 mm tool shank hole (depth x diameter): 92 mm T-slots: 2 Stk total power requirement: 6 kW weight of the machine ca.: 5,5 t Rated force: 630 kN (63 tons) Maximum sheet thickness: 3.2 mm Ram stroke: 8–120 mm Stroke rate: 56 / 90 strokes per minute Shut height (table to ram): 560 mm Ram adjustment: 70 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder, milling holder, milling tool, long milling arbor, mounting bracket -Milling chuck: SK50 chuck -Type: 50 x 50 x 630 mm -Shaft: Ø 27 mm / Sleeves Ø 40/85 mm see photos -Dimensions: Ø 100 x 835 mm -Weight: 23.5 kg

Dividing head, spiral milling attachment, dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter grinding holder -Subhead -Point width: 450 mm -Recording: SK40 - Suitable for: Milling cutter sharpening -Translation: 1:40 -swivel -Weight: 60 kg

pressure: 160 t stroke: 500 mm total power requirement: 20,5 kW weight of the machine ca.: 7,5 t Rated force: 160 Mp (˜ 1600 kN / 160 tons) Operating pressure: 144 kp/cm² Speed: Downward: 200 mm/s Upward: 250 mm/s Ram stroke: 500 mm Throat depth: 360 mm Max. distance (table to ram): 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 800 mm total power requirement: . kW weight of the machine ca.: . kg dimensions of the machine ca.: . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 210 x 570 mm -T slots: 3 - rotatable and swiveling -Fits Deckel Mikron WMW and other milling machines -Weight: 95 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 170 mm -Clamping depth: max. 120 mm -Dimensions: 480/170/H130 mm -Weight: 30 kg

Centrifugal quick-release chuck, centrifugal chuck, three-jaw chuck -Outer diameter: 155 mm -Clamping range: Ø 12-30 mm -Cone mounting: Ø 82 mm -Bolt circle: Ø 105 mm -Quantity: 2x food available Price: per piece -Weight: 6 kg/piece

diameter range 3-10 mm cutting length 2000 mm speed - meters/min 22-71

Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, roller milling cutter, milling cutter, hob cutter, spline shaft hob cutter -Manufacturer: WMW PWS, 17 hob cutters -Hole: Ø 27 mm 4 pieces, Ø 32 mm 7 pieces, Ø 40 mm 6 pieces -Different types: see photos, more pictures can be sent -Price: complete -Dimensions: 400/400/H150 mm -Total weight: 52.5 kg

Spline hobs, gear cutters, modular milling cutters, gear hobbing cutters, gear form cutters, modular milling heads, shell end mills, cylindrical milling cutters, milling cutters, hobs, spline hobs -Manufacturer: WMW PWS, 29 hob cutters -Hole: Ø 27 mm 25 pieces, Ø 32 mm 4 pieces -Different types: see photos, more pictures can be sent -Price: complete -Dimensions: 490/300/H70 mm -Total weight: 30.7 kg

Drill press, drill press, stand drill, pillar drill -Manufacturer: WMW, column drilling machine type CM 10S/55 -Motor: 630 W -Speeds: 460 - 2190 rpm -Translation: via V-belt -Table size: 220 x 280 mm -spindle taper: MK1 -Spindle stroke: 70 mm -Projection: 200 mm -Pillar Ø: 85 mm -Dimensions: 400/800/H1670 mm -Weight 206 kg

Centrifugal quick-release chuck, centrifugal three-jaw chuck -Outer diameter: 155 mm -Clamping range: Ø 25-45 mm -Cone mount: Ø 62 mm -Bolt circle: Ø 82 mm -Quantity: 2x food available Price: per piece -Weight: 6 kg/piece

Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Baking: soft -Mouth size: Ø 200 mm -Weight: 22 kg

Precision three-jaw chuck, chuck, faceplate, 3-jaw chuck -DHK: 200x3 -TGL: 30-2333 -Mouth size: Ø 200 mm -Bakes: individually and fully adjustable -Interchangeable jaws -Through hole: 55 mm -Recess: Ø 160 mm -Quantity: 1x food available Price: per piece -Weight: 16 kg

Universal milling head, milling holder, milling extension, angle milling head -Manufacturer: WMW HECKERT, milling head from milling machine FSS 315-V -Recording output: SK50 -Recording: Input gear -Milling head: fully pivotable -Stroke: 72 mm -Transport dimensions: 850/650/H520 mm -Weight: 277 kg

Universal milling head, milling adapter, milling extension, angle milling head -Spare part of a: WMW HECKERT milling machine -Number: 1 piece angle milling head -Recording output: SK50 -Recording: input gear -Milling head: completely swiveling -Rezes recording: mm -Pitch circle: mm -Transport dimensions: 750/600/H530 mm -Weight: 296 kg

Standard holders and accessories, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Quantity: 3x Sassex/WMW drill chucks -Recording: MK6 -Total length: 600 mm -Pin holder: Ø 12 mm -Pen spacing: 77 mm -2x Sassex/WMW drill bit holders -Recording: MK6 -Total length: 620 mm -Pin holder: Ø 16 mm -Pen spacing: 96 mm Price: for all 5 pieces -Weight: 56 kg

Crimping pliers, crimping pliers, cable lug pliers, mechanical crimping pliers, pressing jaws, pressing tool for cable end sleeves, wire end sleeves, cable lugs, hand crimping pliers, sleeve pliers, clamp sleeve pliers -Manufacturer: WMW, hand crimping pliers type PH 2.5C -Crimping: of cable lugs and cable connectors -Pressing force: 25.0 N -Pressing stroke: 15 mm -Transport case: incl. accessories, see photo -Quantity: 1x crimping pliers available -Price: per piece -Dimensions of pliers: 600/180/H25 mm -Total weight: 3.2 kg

Brush cylindrical grinder, external cylindrical grinder, internal cylindrical grinder, centering grinder, center grinding machine, hydraulic universal cylindrical grinder, polishing machine -Manufacturer: WMW Heckert, Hydraulic universal cylindrical grinding machine -Spindem lotor: VEB 0.8/1 kW / 1410/2840 rpm -Hydraulic drive: ADDA 0.75 kW -Centre height: 270 mm -Max. material diameter: Ø 320 mm when converted -Brush: max. Ø 250 mm -Center distance: 420 mm -Dimensions: see photos -Base cabinet: with extensive accessories incl. -Dimensions: 1720/920/H1230 mm -Weight: 790 kg

Forced mixer, agitator, stirring device, mixing tool, stirrer -Nominal input: 1050 watts -Connection: 230 volts -Speed: 230 rpm -Dimensions: 1000/520/H130 mm -Weight: 10 kg

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutter -inch thread: 1/2-3/4 inch -Weight: 6 kg

Crimping tool, cable lug crimping tool, mechanical crimping tool -for: large cable lugs, hoses -up to: 60 mm² -Number: 7x hand press jaws available Price: per piece -Dimensions: 650/220/H45 mm -Weight: 8 kg

end mill, end mill, milling cutter -Outer diameter: 200/H60 mm -Teeth: 12 -Quantity: 1 available Price: per piece -Weight: 9 kg

Heavy-duty lathe, lathe, lathe, lead and tension spindle lathe, lead and tension spindle lathe, automatic lathe -Manufacturer: WMW, automatic lathe type DRT 50m -Turning length: 550 mm -Turning Ø over bed: 530 mm -Spindle bore: Ø 63 mm -Spindle speeds: 9 - 450 rpm -Three jaw chuck: Ø 200 mm -Turret: with accessories, see photos -Drive motor: 5.3 / 6.8 kW -Dimensions: 2420/1040 / H1460 mm -Weight: 2200 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: Milling machine table -Table surface: 400 x 600 mm -T slots: Slot width 14 mm, slot spacing 50 mm -Rotatable. Manually operated with 6 mounting screws. -tiltable and swiveling: via cranks -Fits Deckel Mikron WMW and other milling machines -Overall dimensions: 700/600/H345 mm -Weight: 198 kg

Fan head, chamber fan, Dorade fan, mushroom fan, ship fan, deck fan, ventilation, mushroom head hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, louvered damper, backflow preventer, lamellar fan, mushroom head hood -Manufacturer: WMW, fan head type MTK DN 50 GL 37081-86 HH -Flange: DIN 2576 ND10-NW50/60 -Bolt circle Ø 126 x 18 mm -Quantity: 6x hood available -Price: per piece -Dimensions: 230/165/H225 mm -Weight: 6.5 kg/pc.

Fan head, chamber fan, Dorade fan, mushroom fan, ship fan, deck fan, ventilation, mushroom head hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, louvered damper, backflow preventer, lamellar fan, mushroom head hood -Manufacturer: WMW, fan head type MTK DN 40 GL 37081-86 HH -Bolt circle Ø 110 x 18 mm -Quantity: 1x hood available -Dimensions: 220/140/H220 mm -Weight: 5.4 kg

Fan head, chamber ventilator, dorade ventilator, mushroom ventilator, ship ventilator, deck ventilator, ventilation, mushroom hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, multi-leaf damper, non-return damper, lamellar ventilator, mushroom hood -Manufacturer: WMW, fan head type MTK DN 65 GL 37081-86 HH -Flange: DIN 2576 ND10-NW65/76 -Bolt circle Ø 143 x 18 mm -Number: 2x hood available -Price per piece -Total dimensions: 280/185/H255 mm -Weight: 9 kg/pc.

Fan head, chamber fan, Dorade fan, mushroom fan, ship fan, deck fan, ventilation, mushroom head hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, louvered damper, backflow preventer, lamellar fan, mushroom head hood -Manufacturer: WMW, fan head type MTK DN 80 GL 37081-86 HH -Flange: DIN 2576 ND10-NW80/88 -Bolt circle Ø 160 x 18 mm -Quantity: 5x hood available -Price: per piece -Dimensions: 310/200/H290 mm -Weight: 12.2 kg/pc.

Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Collet chuck holders: Ø 1x12/2x18/2x20 mm -Price/Sale: complete -Weight: 1 kg

Bezel, stick, lynette -Max. Passage: Ø 65 mm -Tip height: 83 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 250/280/H65 mm -Weight: 6 kg

Fan head, chamber ventilator, dorade ventilator, mushroom ventilator, ship ventilator, deck ventilator, ventilation, mushroom hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, multi-leaf damper, non-return damper, lamellar ventilator, mushroom hood -Manufacturer: WMW, fan head type MTK DN 150 GL 37081-86 HH -Bolt circle Ø 238 x 22 mm -Number: 1x hood available -Price per piece -Total dimensions: 310/200/H290 mm -Weight: 35 kg/pc.

Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 12/1 with base frame -Clamping table: 340 x 280 mm -Travel: 370 mm -Spindle holder: MK2 -Projection: 215 mm -Speeds: 224/450/900/1800 rpm -Column: diameter 92 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEB 0.4/0.7 kW with brake -Voltage: 380 V -Dimensions: 620/480/H1710 mm -Total weight: approx. 182 kg

fixed point, fixed center point, fixed Morse taper, fixed center point, center points -Manufacturer: WMW ABW, fixed centering tip with mounting bore -Recording: Morse cone MK5 -Bore: Ø 8 mm -Number: 2x centering tips available -Price: per piece -Dimensions: Ø 46/200 mm -Weight: 1.9 kg/pc.

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 360 x 660 mm -T grooves: 8x 12 mm -rotatable: by hand with 4x fastening screws -swivelling: via crank -Movable: via crank 200 mm -Number: 1 piece available

Thread cutting head, thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW, self-opening thread cutting heads type A2 13 pieces -Size: M16 x 1.75 recording MK3 2 pieces -Size: M10 x 1.5 1 piece -Size: Ø 17 mm 10 pieces -Price/tax: complete -Transport dimensions: 400/250/H270 mm -Weight: 22 kg

Tapping chuck, thread chuck, tapping chuck, thread cutting attachment -Manufacturer: WMW, thread cutting device type GSA 1 -Recording: MK1 / B12 -Reversing gear: Quick return integrated -Clamping diameter: max 6 mm -Thread cutting sizes: M2-M4 -Number: 2x thread cutting chucks available -Price: per piece -Dimensions: 125/100/60 mm -Weight: 0.7 kg