wmw glauchau used for sale

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Fucking size: Ø 200 m -Through hole: Ø 54 mm -Short taper: 5 -Hole circle: 105 mm -Weight: 16.2 kg

hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS) Type K Module 2 2109 HSS / Co TGL 29-8002 bore Ø 27 mm New Dimensions: 62 x 62 x 48 mm

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm -Thread recording -Through hole: Ø 53 mm -Weight: 19.7 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm -Short taper mount for: bayonet mount -Cone size: 6 -Cone: Ø 106 mm -Hole circle: Ø 133.4 mm -Through hole: Ø 54 mm -Weight: 15 kg

hob, gear cutter for hobbing machine WMW / PWS Type K Module 2 2503 HSS / Co TGL 29-8002 bore Ø 27 mm unused ! Dimensions: 62 x 62 x 48 mm

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -recess recess: Ø 210 mm -Through hole: Ø 80 mm -Weight: 18 kg

hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 2 605 HSS / Co TGL 29-8002 bore Ø 27 mm New ! Dimensions: 63 x 63 x 48 mm

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 200 mm -centrically exciting: -Passage: Ø 54 mm -Weight: 15 kg

hobs, sprocket hobs WMW / PWS ( WMW/PWS ) type BP II ( BPII ) chain pitch 9,25 rollers Ø 5 mm 9317 HSS / Co bore Ø 27 mm New ! Dimensions: 70 x 70 x 57 mm

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate -T-grooved plate comes: from a WMW boring mill -Travel: approx. 1200 mm -Mounting plate width: 1405 x 1250 mm -Dimensions: 2900/1350/H940 mm -Weight: approx. 1200 kg

Hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS ) Type A Module 1,5 351 HSS / Co TGL 29-8002 bore Ø 27 mm New Dimensions: 85 x 85 x 40 mm

Lamellar aprons, samurai aprons, machine protection, protective cover, bellows, protective cover system, protection system, guide protection, -Cover comes: from a WMW boring mill -for guide inside dimensions: 100 x 725 mm -Extractable: mm -Dimensions: 950/820/H150 mm -Weight: 30 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -one set: hard interchangeable jaws -Passage: 81 mm -Rezess: Ø 210 mm -Hole circle: Ø 230 mm -Weight: 19 kg

3-jaw chuck, three-jaw chuck ROTO RECORD EF 250 Outer Ø: 250 mm bolt circle Ø : 225 mm bore: 80 mm height with jaws: 140 mm Clamping process via rotatable base plate ! with interchangeable jaws ! used, tested ! Dimensions: 250 x 250 x 140 mm

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 200 mm -hard: interchangeable jaws -Base plate for: machine table -Passage: Ø 54 mm -Weight: 22 kg

3-jaw chuck, three-jaw chuck WMW DH475x3-III TGL 30 2332 Outer Ø: 475 mm bolt circle (flange) Ø: 172 bore Ø: 190 mm bore (flange) Ø: 140 mm height with jaws: 195 mm max. 800 rpm used, tested ! Dimensions: 475 x 475 x 195 mm

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Type: DH250x4/TGL30-2332 -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Rezess: Ø 210 mm -Hole circle: Ø 230 mm -Number: 3x available -Price: per piece -Weight: 18 kg

3-jaw chuck, three-jaw chuck, power chuck, wedge hook chuck WMW TGL 30-2312 outer Ø: 200 mm bolt circle Ø : 150 mm flange Ø : 180 mm height with jaws: 153 mm jaws individually adjustable by toothing ! used, checked ! Dimensions: 200 x 200 x 250 mm

Swivel lining, 3- cheek lining -Type: DHB 200x3x5 TGL 30 2332 -Feed size: Ø 200 mm -Passage: Ø 54 mm -max.: 3000 Rpm -Short cone recording: Ø 105 mm -Weight: 24 kg

Alignment pin set WMW D 45 ( D45 ) 751 82 453 10 SK 45 spigot: Ø 40 mm Dimensions: 177 x Ø 58 mm Set consists of 2 pieces ! New ! Dimensions (packaging): 260 x 120 x 90 mm

Reamers, twist drills, drill bits -Twist drill: different sizes on request -different producers -Price: Ø 10 - 30 mm EUR 0.50/mm (drill Ø 20 mm = EUR 10 net) -Price: Ø 31 - 45 mm 1 EUR/mm (drill Ø 35 mm = 35 EUR net) -Price: Ø 46 - 80 mm 1.60 EUR/mm (drill Ø 50 mm = 80 EUR net) -Two knife trimmers -Diameter: 10-80 mm -different lengths -Recordings: MK1 - MK6 -Type: HSS

Tool holder, reducing sleeve for MK tools WMW C 45 x 5 x 185 ( C45x5x185 ) TGL 27260 SK 45 Tool: MK 5 Dimensions: 268 x Ø 80 mm New ! Dimensions (packaging): 290 x 120 x 110 mm

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Cone: Ø 139 mm -Hole circle: Ø 170 mm -Through hole: Ø 80 mm -Weight: 24 kg

Turning tool, special accessories WMW TGL 32680 ( TGL32680 ) TGL 30-1201 Shaft: Ø 20 mm Adapter: Ø 8, 10, 12 mm in wooden box used, tested ! Dimensions: 185 x 120 x 60 mm

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 250 mm -Rezess: Ø 230 mm -Hole circle: Ø 200 mm -Number: 2x available -Price: per piece -Weight: 35 kg

Milling machine, universal milling machine, tool milling machine -Clamping table: 1600 x 400 mm -Travel: X/ Y/Z 1100/400/400 mm -electric tool clamping: -Spindle mount: SK50 -Quill stroke: 100 mm -Speeds: from 28 to 1400 rpm -Coolant device: -Dimensions: 2100/2320/H2700 mm -Weight: 4000 kg

Cutter mandrel, tool holder, with tightening thread WMW 4 x 25 x 160 ( 4x25x160 ) TGL 30-4113 MK4 shaft diameter: Ø 20 mm Tool holder: Ø 25 mm New ! Dimensions: 490 x 45 x 45 mm

Tool holder, milling holder, milling tool -Quantity: 4x recording SK40 -1x Ø: 16 x 19 mm -1x Ø: 16 x 25 mm -1x Ø: 27 x 25 mm -1x: drill chuck - is only sold complete -Weight: 6kg

Tool holder, milling holder, milling tool -Number: 2x SK45 holders -1x recording inside: Ø 28 mm -1x recording outside: Ø 40 mm -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 4.5 kg

Cutter mandrel, tool holder, with tightening thread WMW 4 x 25 x 80 ( 4x25x80 ) TGL 30-4113 MK4 shaft diameter: Ø 16 mm Tool holder: Ø 25 mm New ! Dimensions: 300 x 45 x 45 mm

Tool holder, milling holder, milling tool -Number: 2x SK45 holders -Inside mount: Ø 36 x 90 mm -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 5.4 kg

Tapping chucks, thread chucks, tapping chucks -Transfer in current condition as seen -Threading chucks without collets -with slip clutch -Cutting capacity: M24-M64 -Recording: MK5 -Number: 1x tapping chucks available -Weight: 13 kg

Cutter mandrel, tool holder, with tightening thread WMW 3 x 25 x 160 ( 3x25x160 ) TGL 30-4113 MK3 shaft diameter: Ø 20 mm Tool holder: Ø 25 mm New ! Dimensions: 425 x 45 x 45 mm

Collet holder, tool holder, tool holder, milling holder, milling tool -Adjustment: SK50 -without adapter sleeves -Manufacturer: WMW -Type: size 25 -Weight: 3 kg

Shell end mills, shell mills, milling cutters -Number: 8 pieces finishing cutter/roughing cutter -Socket: Ø 40 mm -Various diameters: 120-125 mm -Different producers -Price: complete -Weight: 22 kg

Cutter mandrel, tool holder, with tightening thread WMW 4 x 30 x 100 ( 4x30x100 ) TGL 30-4113 MK4 shaft diameter: Ø 16 mm Tool holder: Ø 30 mm New ! Dimensions: 325 x 50 x 50 mm

Shell end mills, shell mills, milling cutters -Number: 18 pieces finishing cutter/roughing cutter -Socket: Ø 40 mm -Various diameters: 100-125 mm -Different producers -Price: complete -Weight: 57.6 kg

Shell end mills, shell mills, milling cutters -Number: 9 pieces finishing cutter/roughing cutter -Socket: Ø 32 mm -Various diameters: 76-100 mm -Different producers -Price: complete -Weight: 13.3 kg

Clamping technology set, tool holder, reducing sleeve, grain tip WMW 4 x reducing sleeve: SK 50 to SK 30, SK 40, MK 3 and to MK 5 2 x fixed grain tip SK 45 1 x mandrel SK 50, Ø 40 mm, 80 mm long 1 x mandrel SK 50, Ø 50 mm, 235 mm long used, tested ! Dimensions (packaging): 330 x 220 x 440 mm

Shell end mills, shell mills, milling cutters -Number: 28 pieces finishing cutter/roughing cutter -Socket: Ø 22 mm -Various diameters: 49-80 mm -Different producers -Price: complete -Weight: 10.5 kg

Shell end mills, shell mills, milling cutters -Number: 12 pieces finishing cutter/roughing cutter -Socket: Ø 32 mm -Various diameters: 75-110 mm -Different producers -Price: complete -Weight: 21.3 kg

Standard holder and accessories, SASSEX twist drill knife, Sassex spiral drill knife, drilling knife, Sassex drill bit, Sassex holder, tool holder, holder for drill knife, twist drill bit -Number: 3x Sassex/WMW drill bits -Recording: MK6 -Overall length: 600 mm -Pin holder: Ø 12 mm -Distance pins: 77 mm -2x Sassex/WMW drill bits -Recording: MK6 -Overall length: 620 mm -Pin holder: Ø 16 mm -Distance pins: 96 mm -Price: for all 5 pieces -Weight: 56 kg

Machine vice, vice, drill press vice -Jaw width: 160 mm -Back height: 50 mm -Clamping depth: max. 105 mm -Dimensions: 460/163/H123 mm -Weight: 38.3 kg

Profile steel shears, hand lever shears, hand sheet metal shears, sheet metal shears, sheet metal shears -Scissors: 185 mm -cutting: 40 mm angle iron -cutting: Ø mm round steel -Dimensions: 460/985/H2220 mm -Weight: 88 kg

Slip-on cutter, insert cutter WMW FPXH63-16 074581 TGL 38502/06 Diameter: Ø 80 mm 5 Cutting with one holder each for inserts SK40 New Dimensions: 195 x 80 x 80 mm

Automatic drill, drill press, drill press, stand drill, pillar drill -Spindle mount: MK 3 -Transmission -Automatic drill: with rapid traverse -Automatic drilling -Threading: automatic -Table size: 450 x 360 mm -Projection: 285 mm -Spindle stroke: 150 mm -Speed: 180-2000 rpm -Feed: 0.08-0.32 mm/rev -Dimensions: 900/1000/H2100 mm -Weight: 840 kg

Cutter mandrels, tool holder, with tightening thread WMW, VWF 40 x 22 x 315 ( 40x22x315 ) SK40 tool holder: Ø 22 x 315 mm used ! Dimensions: 468 x 63 x 63 mm

Moving centering point, heavy duty grain tip ROTERBERG, WMW DREHMEISTER Type P TGL 30-2325 diameter : Ø 155 mm Grains diameter: Ø 64 mm inner diameter (receptacle): 135 / 127 x 102 mm (conical) used, tested ! Dimensions: 299 x 155 x 155 mm

max. workpiece diameter: 500 mm threading length: 1250 mm max. module: 12 min. module: 0,5 total power requirement: 8 kW weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Moving centering point with tightening thread MK 5 Shipping within Germany without islands Euro 6.50