wmw glauchau used for sale

turning diameter:480 mm turning length:1250 mm control:H 645 weight of the machine ca.:8 t dimensions of the machine ca.:5 x 2 x 2 m centre distance:1580 mm swing over bed:495 mm swing diameter:üb.Querschlitten ca.350 mm working area:1600 mm control:H645 connected load:50 kW

turning length:630 mm total power requirement:16 kW weight of the machine ca.:5 t dimensions of the machine ca.:3400 x 1500 x 1600 mm swing diameter over slide rest:Hinterdrehschlitten 250 mm centre height:über Hinterdrehschlitten 150 mm center height over bed:300 mm turning spindle:Kopf DIN 55021 Gr. 8 centre distance:1000 mm accessories::2 Schränke Wechselräder

x-travel:850 mm y-travel:280 mm z-travel:355 mm total power requirement:8 kW weight of the machine ca.:4 t dimensions of the machine ca.:2 x 2 x2.40 m revolutions per minute: 28-1.400 U/min table-size:1.200 x 370 mm surface area:1.060 x 260 mm spindle taper:SK 50

x-travel:500 mm y-travel:250 mm z-travel:325 mm table-size:400 x 200 mm T-slots:10/ 20 mm T-slots:4 St workpiece height max.:300 mm template table:380 x 380 mm speeds::2500 - 20000 U/min no. of turning speeds:3 total power requirement:0,25 kW weight of the machine ca.:430 kg dimensions of the machine ca.:1000 x 1200 x 1500 mm

saw blade diameter:400 mm cutting diameter:400 mm material:Vollmaterial 20 - 130 mm material:Walzprofile 40 - 120 mm material diameter from - to::Rohr u. Profilfrohr bis 100 x 14 mm sawblade width:4 mm total power requirement:5,1 kW weight of the machine ca.:1850 kg dimensions of the machine ca.:3300 x 1630 x 1960 mm Documents:vorhanden

sanding belt length:max. 470 mm workpiece dia.:600 mm table - swivable:0 - 6 Grad taper:Reitstock Morse 2 turning speed range::1260 - 3100 U/min table movement:längs 470 mm tool taper:schwenkbar 0-6 °, 90° dre total power requirement:0,4 kW weight of the machine ca.:950 kg dimensions of the machine ca.:1100 x 1100 x 1500 mm Documents:vorhanden

internal diameter:315 mm grinding depth:315 mm swing diameter:420 mm number of spindle speeds:32 - 360 U-min wheel box:-drehzahl 100 - 8000 U/min face diameter:500 mm total power requirement:12 kW weight of the machine ca.:5900 kg dimensions of the machine ca.:3400 x 1750 x 2000 mm

grinding length:1000 mm grinding width:250 mm workpiece height:400 mm total power requirement:12 kW weight of the machine ca.:3,8 t dimensions of the machine ca.:3.300 x 1.800 x 2.300 mm hydraulic power unit:400 x1000 x 1500 mm control cabinet:2 Stück, 1000 x 1400 x 1500 mm

turning diameter over bed:630 mm turning diameter over slide rest:360 mm turning length:2000 mm spindle speeds::22,5 - 1120 centre distance:2500 mm feeds - cross:0,018 - 1,25 mm/U spindle motor:15 kW total power requirement:18 kW weight of the machine ca.:6,0 t dimensions of the machine ca.:3,6 x 1,4 x 1,7 m - Heidenhain digital readout - rapid traverse - Multifix quick tool change with inserts - faceplate - 2 steaday rests, 3-jaw chuck - splash protection

Support bearing, shaft guide WMW Support bearing for WMW BFT 100 shaft diameter: Ø 100 mm Flange diameter: Ø 450 mm For more WMW support bearings see MMZ582 ! used, tested ! Dimensions: 450 x 450 x 360 mm

For sale lot of machines, main for thread grinding, and gear grinding, also horizontal pfauter, best price for bundle. Reishauer NRK Reishauer US x2 Klingelnberg HNC 35K Wmw hinterdrehmachine x2 Reinecker hinterdrehmachine Kapp grinding Wmw niles 35/20-29 Horizontal Pfauter Lindner grinding x2 Klingelnberg gear test machines

Eccentric C stand press, little used C frame - eccentric press, used Type: PED 63.3 S4 manufacturer: WMW Year of construction: 1994 Pressing power / rated pressure: 63 t Sheet thickness / material thickn. 3.2 mm Table size / surface of bed: 800 x 580 mm Hole in the table / hole in table: 300 mm diameter. Stroke / stroke of slide: 8... 120 mm Number / number of strokes: 56 / 90 / min Tappet adjustment / adjustment of slide: 70 mm The maximum distance between Table and plunger / max distance between table and slide: 560 m Projection / Cap: mm Power of main motor / power of main motor: 6 kW Weight / weight: 5.5 t

Mk 5, 14 - 1800 rpm, drilling spindle stroke 400 mm, 0.05 - 2.5 mm/U, weight approx. 7 t Further: Radial WMW BR 56/1600 Radial drilling machine Raboma 12 Uh 1250 with turning tensioner 2 squid reversing tensioner 800 mm see pictures

Vertical Lathe WMW NILES DMF 6300 Condition: Very good, complete Technical details: Turning diameter: 6300 mm Turning diameter, with side-support: 6000 mm Degrees displacement of the vert. supports: +/-30 ° Displacement of the side-support: 1800 mm Workpiece height max. : 2500 mm Workpieceweight max. : 50000 kg Chuck diameter: 5300 mm Speedrange: 0.35-14 rpm Feeding speeds (16): 0.063-11.2 mm/omw. Rapid speed of the supports: 1000 mm/min ¬ ¹ Rapid speed of the side-support: 500 mm/min ¬ ¹ Connection power: 120 kW Dimensions of the machine W: 14.40 x 8.20 x 8.70 m Weight of the machine ca.: 174.000 kg

Type SAXW 63/3000 Producer WMW Meuselwitz Year of manufacture 1979 Parameters 63mm, 3000mm Location Praha CZ Swing 750 mm Distance between centres 3000 mm Max. weight of workpiece 6000 kg Machine suitable for modernisation

Draw spindle precision lathe Fabr. WMW Mikromat Dresden Type DZFG 200 x 500Fabr. -No: 7960, year of construction approx. 1986Technical specifications:Tip width 500 mmTop height 165 mmgr. circulation diameter over bed 315 mmGr. orbital diameter over cross slide 200 mmTurning length between the tips 560 mmgr. workpiece diameter for bar work 31 mmGr. chisel cross section 20 x 20 mmPassage of fixed set stick 100 mmPassage of the walking stick 70 mmgr. workpiece mass between the tips 50 kg9 spindle speeds 56 - 2800 rpmRotary feeds with increments of 1.25xa0xa0xa0longitudinal 0.02 - 0.8 mm / revxa0xa0xa0plan 0.02 - 0-4 mm / revThread feeds metric thread lengthwise 0.2 - 60 mm / revxa0xa0xa0plan 0.2 - 30 mm / revInch thread lengthwise 60 - 1/2 Gg / xa0xa0xa0plan 60 - 1 Gg / Module thread lengthwise 0.1 - 28 mm / revxa0xa0xa0plan 0.1 - 14 mm / revDiametrical pitch thread lengthwise 240-1 3/8 Gg  ...

Universal console milling machine make WMW HECKERT type FU 355 x 1250Masch. -No: 47512/1962 built in 1962Table mounting surface: 355 x 1250 mmTable can be swiveled 45 ° on both sidesTable can be swiveled: + - 45 °Table longitudinal path X: 1120 mmCross slide cross travel: 345 mmConsole vertical path: 400 mmTable load max .: 1500 kgSpeed range: 28 - 1400 rpm.Feed area longitudinal and transversal: 16 - 800 mm / minFeed range vertical: 5 - 250 mm / minRapid traverse longitudinal and transverse: 3150 mm / minRapid traverse vertical: 1000 mm / minTool holder: ISO 50Drive power: 14.5 kWWeight: 3850 kgExternal dimensions: 2400 x 2300 x 1800 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available  ...

Chuck flange, chuck flange, intermediate flange for lathe chuck and face plates WMW outer- Ø: 390 mm height: 110 mm machine side: flange: Ø 125 / 168 mm (inside / outside) female thread: M120 x 6.0 Length: 60 mm 2 x locking thread: M10 x 1.5 lathe chuck side: 2 x slotted holes: Ø 28 x 90 mm, bolt circle: 210 / 334 mm 2 x bore: Ø 45 mm, bolt circle: 282 mm 2 x bore: Ø 21 mm, bolt circle: 235 mm 1 x bore: Ø 25 mm, bolt circle: 215 mm short cone: Ø 194 / 196 mm x 10 mm suitable face plate see MMZ666 ! used, tested ! Dimensions: 390 x 390 x 110 mm

grinding diameter: 250 mm grinding length: 650 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Glauchau Type: SI 6/3 CNC brand: Siemens CNC model: Sinumerik Year of make: 1997 CNC controlled Maximum grinding depth: 250 mm Grinding diameter: 650 mm ø Rapid traverse: 10 m/min Speed: 50 - 500 RPM Inner grinder X (inner grinding device): 155 mm Length displacement interior grinding device on the table: 540 mm Tool grinding device Z (table move): 700 mm Circulation diameter: 650 mm ø Grindig diameter for internal grinding: 10 - 500 mm ø The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WMW SIP 400x500 GRINDING MACHINE Magnetic tray The machine is located in France.

CHP Power Plant 800 kWe with 2xMWM TCG 2016V08 Gas Gensets Good condition and low operating hour 800 kWe / 400 V / 50 Hz combined heat and power (CHP) plant running on natural gas or biogas. The plant was delivered by MWM in 2011 and it operation was closed in 2021. Thermal energy is in form of hot water at 90°C and currently used for district heating purpose. Due to the low amount of biogas, cogeneration plant worked at low capacity (30-40%), and not around the clock. It has a complete gas treatment and mixing system to utilize biogas from landfilling which has 40 – 55 % of CH4. Power generators are installed in two soundproof containers, TEAM Evo WMW power plant control system and all electric switches and control cabinets are installed in separate control room. Heat recovery system is built next to genset containers. Both units have separate cooling radiators for engine cooling ...

Max. pallet dimensions: 1200x800x2400mm, max. load: 260kg, roller diameter: 50mm, length: 12,000mm.

Max. pallet dimensions: 1200x800x2400mm, max. load: 260kg, roller diameter: 50mm, length: 12,000mm.

: gebraucht : 1962 : 3962 : prompt, Zwischenverkauf v : 3950 € : 1 : 40 mm : MK 4 : 350 mm : 32 - 1400 U/min : 1100 mm : 700 mm : 2650 mm : 1055 kg : automatisch 0,11 - 1,73 ( mm/U : 650 (max) mm : 780 x 650 mm : 280 mm Radial drilling machinewith 12 Revs 9 automatic feeds coolant pump Nouser manual DOES NOT COMPLY WITH THE GERMAN UVV &, AUSTRIAN AMVO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Round Table, Round Dividing Table, Circular Dividing Table WMW Ø 250 mm Table height: 100 mm Slot width: 14 / 24 mm Groove depth: 25 mm Centering hole in table: Ø 20 mm Mounting holes in base plate: Ø 15 x 26 mm ( U-shape ) used, checked! Dimensions: 410 x 370 x 100 mm

Rotary table, round dividing table, circular dividing table WMW C 315 k ( C315k ) TGL28561/01 Table diameter: Ø 315 mm Table height: 135 mm Slot width: 14 / 25 mm Groove depth: 24 mm Centering hole in table: Ø 23 mm Mounting holes in footplate: Ø 21 x 25 mm ( U-shape ) used, tested ! Dimensions: 560 x 395 x 135 mm

Hydraulic power unit, hydraulic pressure generator WMW TGL 30-7306 63 - 160 kp/cm² ( approx. 62 - 157 bar ) engine: 0.8 kW 380 V 3 AC 50 Hz usable oil quantity: 8 l used, tested ! Dimensions: 560 x 430 x 420 mm

Series limit switch WMW 204 ZS Pg21 ( 204ZSPg21 ) 8 Switch used ! Dimensions: 220 x 80x 135 mm

two-pedal foot switch with protective cover WMW one NC and one NO per pedal used, tested ! Dimensions: 315 x 210 x 135 mm

Power supply WMW, ROBOTRON STM 2 x STM 12 V / 4.2 A / 10 2 x STM 24 V / 2 A / 01 1 x STM 12 V / 1.5 A / 02 1 x STM 5 V / 3.3 A / 02 1 x NFI used ! 520 x 230 x 160 mm

Machine vice WMW 160 mm jaw width: 160 mm jaw height: 50 mm wingspan: 0 - 190 mm used, tested ! Dimensions: 455 x 160 x 135 mm

Radial drilling machine WMW-FRITZ HECKERT BR40/2 x 1250 year of construction approx. 1986 drilling capacity in steel: 40 mm 1Projection: 1250 mm workpiece height-max.: 1390 mm Clamping area: 1450 x 920 mm Table surface: 750 x 1350 mm Clamping surface: 1450 x 920 mm spindle mount MK: 5 total power requirement: 5 kW clamping cube: 620 x 500 x 500 mm used, tested ! Dimensions: 2060 x 930 x 2760 mm

Rotary table, swivel and swivel WMW Ø 450 mm swivel 360° x 90° Groove width: 14 / 25 mm foot size: 400 x 500 mm used, tested ! Dimensions: 860 x 800 x 400 mm

Cam switch, 6 steps 32-pole, tap changer ELGERO 63960.201/187 ( 63960201187 ) TGL 8879 16 A 500 V Mounting foot: 85 x 60 mm spare part e.g. for WMW Heckert SWM SP63 ! used, checked ! Dimensions: 230 x 120 x 70 mm

Divider WMW Dimensions: 770 x 250 x 430 mm foot one side with crack

Dividing head WMW Dimensions: 770 x 250 x 430 mm

clamping drive, clamping force generator pneumatic WMW / VORRICHTUNGSBAU HOHENSTEIN B 720 x 106 TGL 30-7608 92 New ! Dimensions: 360 x 200 x 120 mm

Service device, machine control WMW SERVICEGERÄT III AUERBACH Fkr SRS 250/1 ( AUERBACHFkrSRS250/1 ) approx. 6 m connection cable Illustration similar ! used, tested ! Dimensions: 210 x 200 x 170 mm

Control Unit, Control Electronics, Numerical Control WMW, NILES TDR 700-112 ( TDR700-112 ) Input: 260 V 3AC 41 A 49 - 62 Hz Output: 275 V DC 50 A used, tested ! Dimensions: 280 x 250 x 160 mm

Series limit switch, mechanical series position switch WMW 8x C8 8x changeover switch ( micro button ) 250 V AC 4 A Aluminium housing New ! Dimensions ( without cable entry ): 195 x 70 x 80 mm

Control Unit, Control Electronics, Numerical Control WMW, NILES TDR 700-112 ( TDR700-112 ) Input: 260 V 3AC 41 A 49 - 62 Hz Output: 275 V DC 50 A as good as new ! Dimensions: 280 x 250 x 160 mm

Mains Filter Module WMW, RFT TGL 11840 55 / 100 / 56 3x 0.1 μF + 5000 pF 300 V AC 50 Hz New ! Dimensions ( housing ): 135 x 68 x 110 mm Dimensions ( complete ): 135 x 68 x 145 mm

Machine vice WMW jaw width: 160 mm jaw height: 48 mm wingspan: 0...200 mm used, tested ! Dimensions: 500 x 160 x 130 mm

Machine vice WMW jaw width: 125 mm jaw height: 60 mm gradation fixed jaw at 35 mm height ! wingspan: 0...135 mm used, tested ! Dimensions: 410 x 125 x 125 mm

Control unit, control electronics, numerical control WMW, VEM VEB NUMERIK CNC - H 645 ( CNC-H645 ) 19623212 4518784 220 V 48 - 62 Hz used, tested ! Dimensions: 550 x 320 x 630 mm

Machine vice WMW, ROTO RECORD SN 160 jaw width: 160 mm jaw height: 50 mm wingspan: 0...130 mm used, tested ! Dimensions: 480 x 160 x 125 mm

Actuator, DC motor WMW, VEM WSM2-112.25-1212 TGL 34020/03 500 / 2000 rpm 200 V IP54 Shaft: Ø 28 mm Flange: 200 x 200 mm used, tested ! Dimensions: 750 x 220 x 220 mm

Machine vice WMW SND 125 jaw width: 125 mm jaw height: 40 mm wingspan: 0...100 mm used, tested ! Dimensions: 350 x 130 x 105 mm

actuator, servomotor, DC motor WMW WSM2-85.08 1211R ( WSM2-85.081211R ) TGL 34020/03 4500 rpm 170 V DC 26 A IP54 Shaft: Ø 24 mm Flange: 175 x 175 / Ø 200 mm used, tested ! Dimensions: 600 x 200 x 200 mm

Actuator, DC motor WMW, VEM WSM2-112.25-1013 TGL 34020/03 500 / 2000 rpm 200 V IP54 Shaft: Ø 28 mm Flange: 200 x 200 mm used, tested ! Dimensions: 800 x 2215 x 220 mm