wmw fritz heckert used for sale

Travel X/Y/Z: 1600mm/1000mm/1100mm, workpiece carrier (pallets) X/Y: 800mm/800mm-1000mm, change time: 38s, table rotation range: 360°, max. table load capacity: 2000kg, feed rate: 10m/min, rapid traverse: 15m/min, spindle power: 32kW, tool positions: 50, spindle taper: ISO50, speed: 4500rpm. Machine dimensions X/Y: 5800mm/5200mm, weight: approx. 25000kg. Documentation available. An on-site inspection is possible.

Tailstock, counter bearing for dividing head, dividing head -Height: adjustable -Recording: Top -Dimensions: 245/280/H200 mm -Weight: 28 kg

Universal milling angle head, milling angle head -Recording: SK 50 -Flange mounting outer diameter: 380 mm -Bolt circle diameter: 320 mm -Drive mounting diameter: 60 mm -swivel -Quick stroke: 65 mm -Dimensions: 450/400/H700 mm -Weight: 170 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.5 kW -Speed: 3200/5200 rpm -Grinding discs: max. Ø 180 mm -Operating voltage: 380 volts -Dimensions: 500/500/H1550 mm -Weight: 170 kg

FRITZ MÜLLER ZE 625-4 hydraulic press was built in Germany by Fritz Müller GmbH & Co. KG. The machine has been continuously maintained and upgraded throughout its service life. The first major overhaul was carried out in 1988 by the manufacturer’s service Machinenfabrik Mueller-Weingarten AG. A second overhaul was carried out in 2020, during which the press was brought up to current safety requirements. As part of this overhaul, a new control system based on a SIEMENS SIMATIC S7 PLC controller and a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel was installed, the entire electrical system was replaced, seals were replaced and light curtains were installed. The FRITZ MULLER ZE 625-4 is an extremely versatile press designed for even the most demanding metal forming operations. It is capable of performing operations such as deep drawing, stamping, forging, straightening large w ...

A Fritz Gross pipe end processing machine is available. Connected load: 11kW, max. pipe diameter: 60mm, weight: approx. 1500kg. An on-site inspection is possible.

Offered is a universal knee-type milling machine. Working area X/Y/Z: approx. 710mm/250mm/430mm, table clamping surface: 1250mm/315mm, spindle mount: ISO 40, speed range: 45-2000rpm (18 steps), feed rate: 10-1000mm/min, rapid traverse: available, control: conventional with electrical program control (PFAFF panel). Equipped with horizontal milling spindle, manual support bracket for long milling arbors, hydraulic pressure accumulator system, coolant device, chip collection tray, central lubrication. Weight: approx. 2100kg, overall dimensions X/Y/Z: approx. 1950mm/1750mm/1850mm. Inspection possible by arrangement.

Universal Tool Milling Machine Fritz Werner Type 5130 Extremely robust and precise universal tool milling machine from the traditional German quality manufacturer Fritz Werner (model 5130) This conventional bracket milling machine impresses with its solid grey cast iron design and maximum reliability. It is ideal for workshops, toolmaking, repair shops, demanding do-it-yourselfers or training institutions. The machine has a swivelling vertical milling head with manual quill feed (perfect for additional drilling work) as well as a mechanical feed gear. An absolute highlight is the retrofitted premium safety spindle protection from Tecno Più Technical data at a glance: Manufacturer: Fritz Werner Werkzeugmaschinen GmbH (Berlin) Type / Model: 5130 (Series 5.130) Type: Conventional universal tool milling machine Tool holder: SK 40 (steep taper with tightening rod) Table d ...

wheel diameter: 900 mm depth: 900 mm width: 940 mm height: 1.050 mm Disc-Ø: 900 mm Depth: 900 mm Height: 1.050 mm Width: 940 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

5 metalworking machines from various manufacturers are offered. 1) Column drilling machine VEB BS16, year of manufacture: 1960, weight: 110kg. 2) Milling machine Fritz Werner. 3) Pillar drilling machine Infratirea 4GC02502, year of manufacture: 1987. 4) Pillar drilling machine Infratirea, year of manufacture: 1987. 5) Radial drilling machine Tianjin No. 4 Z3063×20.

x-travel: 400 - 800 mm y-travel: 200 - 400 mm z-travel: 200 - 400 mm total power requirement: 3 kW weight of the machine ca.: ? t dimensions of the machine ca.: ? m Short-term free from current operational resolution Untested, wear and tear due to age and use Price EXW / ex foundation Machine package 3 x Bridgeport 1 x Bridgeport design 1 x Kunzmann 2 x Fritz Werner 1 x DETOMBAY 2 x Reckermann The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: ca. 900 mm y-travel: ca. 280 mm z-travel: ca. 400 mm total power requirement: 5 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2,52,52,5 m No. 5100: 1 used vertical milling machine FRITZ WERNER, type FV 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic press manufactured in 1980. This FRITZ MULLER ZAE 400-25.1.1 features a substantial press force of 400 t and a table size of 4,500 × 2,500 mm. The ram and additional clamping plate size is 4,500 × 2,500 mm, with a ram stroke of 1,490 mm, providing robust performance for various applications. The travelling table supports a maximum load of 60 t. If you are looking to get high-quality pressing capabilities, consider the FRITZ MULLER ZAE 400-25.1.1 machine we have for sale. Contact us for further details.

Technical data: Completely overhauled in 2001 Circulation diameter over bed: 1000 mm Diameter in recess: 1120 mm Circulation diameter over bed slide: 690 mm max. height above floor: 1110 mm max. height above bed: 460 mm Bed width: 800 mm Width of recess in front of the plan disc: 550 mm

Radial drilling machine, used radial drilling m/c, used Type: BR 56 x 1600 Manufacturer/ make: WMW Year built/ year of make: 1965 Extension/ length of arm: 300...1600 mm Ma. Drilling radius / max. drill. Radius: 1800 mm Drilling capacity at boring: 56 mm ( St 60 ) Drilling capacity at boring: 80 mm ( GGL 20 ) Thread cutting/ thread cutting: max. 65 mm ( St 36 ) 76 mm ( GGL 20 ) Drilling depth/ drilling depth: 400 mm Tool holder / taper in spindle: MK 5 Removal spindle head to base plate/ distance Spindle head to base: max. 1600 mm Base plate/ base: 1700 x 1000 mm Speed range/ range of speeds: 14..1800 rpm Feed: 0.0315 .. 1.6 mm/U// mm per round Connection value: 7.13kW Weight: about 4.5 t

Extension / distance slide center to frame: 320 mm Sheet thickness / sheet thickness: 3.2 mm Cutting surface / cutting capacity: 1600 mmx2 Distance table pestle/ distance table slide: 417 mm Stroke adjustment / adjustment of stroke: 16...125 mm Stroke number/ number of strokes: 45 / min Pestle adjustable/adjustment of slide: 80 mm Table size / surface of bed: 800 x 630 mm Bumper size / surface of ram: 500 x 400 mm Slope of the stand / inclination of coulmn: 25 Power of main motor power: 4 kW Weight: 2.5 Specification: C-frame punching press, used

Hand spindle press, used Balancier, used Type: PSHZ 25/I Pressing force / rated pressure: 25 t Stroke/ stroke: 250 mm Table size/ table size: 400x 500 mm Stössel/ ram: 200 x 500 mm Table opening / hole in table: 140 mm Weight: 0.9t

We can offer several thread rolling machines with cylindrical dies, any size.

Various sub-equipment from a training workshop, to hand over individually, e.g. lid sub-device with upper beam and counter holder, Universal part apparatus with initial division Walter UTA150E with counter holder and rotary chuck 3 partial discs with parts see above, Part apparatus Walter can be swivelled without initial division. Furthermore Luenetten standing and running, on request please Specify the tip height and distance mid prism to mid plan area. Rest according to photo. Other sub-equipment susengar, Direct division Indirect division, various large sum. Please ask Sub-discs for UTA 150 E 22 24 29 36 37 49 57 63 16 30 33 36 39 51 57 63 16 27 30 33 41 47 53 61 Special price

see picture for data. Table hoehen-adjustable. mass approx.: 1.55 x 0.8 x 2.1 m high

Universal tool-feeding machine, used universal milling machine, used Type FU 250 x 1000/2 Fabr. WMW Auerbach Built: 1988 Table size/ table: 1130 x 255 mm Laengsmotion/ longit. move: X 690 mm Horizontal movement/ horiz. Move: Y 190 mm Vertical movement/ Vert. move : Z 360 mm Tool holder/taper: ISO 40 Spindle speeds R+L infinitely/ speeds of spindle ( left/right) 56 - 2800 rpm. Pre-shot stepless all axes X, Y and Z/ feeds all axis 10 - 630 mm/min / 250 mm/min Drive power/ load 3.8 kW Weight: 2 t Specification: Vertical head,shock head

3-spindle line boring machine

[ 5000 characters max., no information about the advertiser ] Brand:MODUL Model:ZFWZ 2000/3 Type:Gear Hobbers Year:1981 Location:Czech Republic Specification: Max diameter of gear without tailstock 2100 mm Max diameter of gear with tailstock 1450 mm Max face of gear 1060mm Max module with hobbing head 22 Max/ Min center distance 1240/150 mm Min number of teeth 10 Max pressure angel 45 deg Table dia / number of slots 1800 mm/12 Bore in table / length 600/800 mm Max dia of hob / length 300/330 mm Max weight of workpiece 15000 kg Accessories: Standard milling head Tailstock (no clamping) Set of gear supports (shoes) Set of arbors Set of change gears

CNC vertical jig boring machine WMW MIKROMAT Type BKoZ 900x1400/5NC Travel X 1120 mm Travel Y 710 mm Spindle travel Z 315 mm Travel W 630 mm Numerical Command CNC NUM 1060 Spindle Ø 125 mm Cone SA40 Rotation from 36 to 2240 RPM Table size 1400 x 900 mm Distance between colums 1080 mm Maxi distance spindle nose/table from 0 to 900 mm max Maxi eligible load on table 1000 kg max Separate electrical panel Machine renewed in 2000 with CN NUM1060 Voltage 380 V Dimensions (L x W x H) 4000 x 2460 x 3030 mm Weight approx. 9 T MACHINE IN OUR STOCK IN FRANCE.

Universal tool milling machine, used universal milling machine, used Type FU 315 - V/2 Fabr. WMW Heckert Built: 1979 Table size/ table: 1250 x 315 mm Laengsmotion/ longit. move: X: 850 mm Horizontal movement/ horiz. Move: Y: 270 mm Vertical movement/ Vert. move : Z 355 mm Tool holder/taper: ISO 50 Spindle speeds R+L infinitely/ speeds of spindle ( left/right) 28 - 1400 rpm. Pre-shot stepless all axes X, Y and Z/ feeds all axis 10 - 630 mm/min / 250 mm/min Drive power/ load 3.8 kW Weight: 2 t

Extension 1600 mm

Clamping angle with T-slots Size 1600x1250x1000 mm and 1250x1000x750 mm

various wedge shoes, set-up elements, machine feets

table length: 700 mm table width: 700 mm table height: 630 mm power capacity: kW weight of the machine ca.: 0,65 t dimensions of the machine ca.: 0,9 x 0,8 x 0,7 m partial adjustable cube table - 30° in mint condition, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 255 mm numer of jaw: 3 Stück bore: 82 mm Total height: 130 mm weight: 25 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: max. 630 mm grinding width: max. 200 mm workpiece height: . mm x-axis: max. 250 mm y-axis: max. 710 mm distance spindle center to table: max. 500 mm table surface area: 0,25 mm table load: max. 1,1 t table speed -stepless-: 2 - 18 m/min cross feed autom.: . dust exhaust: 0,25 kW coolant pump: 0,09 kW total power requirement: ca. 4,5 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: 2400 x 1600 x 1900 mm Adjustments Y axis: 1 scale value = 0.005 mm Z axis: 1 scale value = 0.002 mm Manual adjustment (within the range of 250 mm of the Y axis): 80 mm Speeds: automatic cross feed Adjustment path in Y direction: - intermittent 0.2 - 20 mm per stroke, - continuous: 0 - 4 m/min Grinding wheel Ø max. 200 mm Grinding wheel bore: 51 mm Grinding wheel width: 20 mm Diamond dressing unit Digitaldisplay for 2 advertisement vertical infeed The data for this ad was cr ...

Max diam 250 , max lenght 2000, 3 x heads , change gears

MAX DIAMETER 1500 MAX MODUL 15