witt pump used for sale

Spiral housing Centrifugal pump Manufacturer: Allweiler Type: NT40-160 Diameter: 136mm 30m³/h H: 30m 3500 rpm Electric motor: Manufacturer: Siemens Type: 1LAZ1302AA90-Z 6.3kw NEW, from warehouse resolution for more information see pictures.

Gear pump Axial Piston Pump NEW/NEW Manufacturer: Rexroth Type: A11VO95DRG / 10R-NSD12K02 Further details and scope of delivery can be found in the Photographs.

Hydraulic pump / hydrostatic pump Manufacturer : Eaton Type : 5422-034 0308026144 CW 0046435916 Further information can be found on the manufacturer's page, or on the type plate, see pictures. Condition: New, may have stock traces, comes from stock. Scope of delivery : see the pictures.

Gear pump Axial Piston Pump Overhauled by the manufacturer + conserved Manufacturer: Rexroth Type: A11VO60EP2G / 10R-NPC12N00H-S Further details and scope of delivery can be found in the Photographs. Grey and red lacquered available. Color may therefore differ from the images. for more information see pictures.

Injection pump diesel pump JCB Stanadyne A3 DB4429-6101 Condition: as good as new (test run ex works) Manafacture: Stanadyne Part Number: A3 DB4429-6101 JCB number: 320/0674 On sale are 40 injection pumps from 2012 to 2020. The pumps were subjected to a test run at the factory. When we arrived at our premises, they were staked out, dismantled and stored.

Variable displacement pump, axial piston helical axis design, for hydrostatic drives in open circuit. Mannesmann Rexroth Replica, New Part The flow rate is proportional to the drive speed and the delivery volume and is infinitely variable at constant drive speed. Manufacturer: Zhen Yuan Model No.: A7VO355DR/63R-VPH02 Year of manufacture: 2023 Nominal size 0-355 cm³ Actuator: Pressure regulator Flow volume 355 cm³ Max. speed 1320

Hydraulic pump Variable displacement pump Manufacturer:- Model: DMVA G 215-080 SD 1 W 31 1 A 0 0 S0 0 The part is technically in good condition, Nevertheless, this is a used items, which shows signs of wear or may have. see pictures for more details.

Hydraulic pump Variable displacement pump Manufacturer:- Model: DMVA G 215-080 SD 1 W 31 1 A 0 0 S0 0 The part is technically in good condition, Nevertheless, this is a used items, which shows signs of wear or may have. see pictures for more details.

Hydraulic pump Variable displacement pump Manufacturer: Rexroth Model: A6VM 55 HD2 / 63W - VZB027B The pump is NEW and fully functional. see pictures for more details.

Stainless steel pump body + pump impeller, 40-160, Lowara, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was bought from a spare parts warehouse and is in very good condition. Scope of delivery: 1 piece stainless steel pump impeller, SH/FH 40 D171 S2, 150784350, second-hand top, original price € 448 excl. 1 piece stainless steel pump body, CRP SH40-160 DIN-JIS, 151380090, second-hand top, original price € 1025 excl. VAT, pump body, cover motor side, cover suction side + connection. Seals mostly present, screws missing. Bellhousing and pump mounting bracket (blue) free of charge Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the ...

SCA Air Driven Piston Pump Max. Temp. 100 °C Material pressure 350 bar Dimensions: 1050 x 650 x 2000 mm More items - new and used - can be found in our shop! International shipping costs on request!

Piston Diaphragm Pump Motor power 5.5 kW Flow rate 6 m3/h Delivery pressure 15 bar The pump was only in operation for 3 years to feed a chamber filter press with vegetable oil

Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump, booster pump, booster pump -Manufacturer: KSB, inline pump MOVI -V 25/104-3 -Drive: 0.55 kW -Speed: 2840 rpm -max. delivery rate: 0.5-2.4 m³/h -max. head: 39-24 m -Dimensions: 185/185/H555 mm -Weight: 22 kg

Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump, pressure booster pump, pressure intensifier pump -Manufacturer: Brinkmann, pressure booster pump type FH 45-54-05 -Drive: 3.3 kW -Speed: 2900 rpm -Max. flow rate: 30 l/min -Max. delivery head: 168 m -Dimensions: 285/220/H1010 mm -Weight: 46 kg

Centrifugal pump, water pump, stainless steel pump, food-grade pump, vertical centrifugal pump, multi-stage vertical centrifugal pump, pressure booster pump, pressure intensifier pump -Manufacturer: Lowara, Multi-stage vertical centrifugal pump -Type: 5SV07F022T -Motor: 2.2 kW / 2860 rpm -Protection class: IP55 -Flow rate: max. 8.5 m³/h -Number: 2x pumps available -Price: per piece -Dimensions: 250/210/H685 mm -Weight: 30.2 kg

Hydraulic Pump Variable Displacement Pump Manufacturer: Poclain Hydraulics Model No.: MSE18-2-D11-T19-2A50257EF The pump is NEW and fully functional. see pictures for more details.

The Alfa Laval SRU6/260/LS is a robust positive displacement lobe pump designed for the gentle and efficient handling of sensitive process fluids. Engineered in accordance with the most stringent hygienic design standards, the pump features fully validated and effective Cleaning-in-Place (CIP) capability. The SRU pump range is suitable for applications across the dairy, food, beverage, brewing, chemical, pharmaceutical, and home and personal care industries. Its smooth, low-shear pumping principle allows for the handling of products with a wide range of viscosities—from low to very high—including creams, gels, emulsions, aerated mixtures, and media containing delicate cells or organic solids in suspension. Products containing fragile solids, such as curd, can be transferred without damage due to the specially designed tri-lobe stainless steel rotors. The pump has a nominal displaceme ...

The Alfa Laval SRU6/260/LS is a robust positive displacement lobe pump designed for the gentle and efficient handling of sensitive process fluids. Engineered in accordance with the most stringent hygienic design standards, the pump features fully validated and effective Cleaning-in-Place (CIP) capability. The SRU pump range is suitable for applications across the dairy, food, beverage, brewing, chemical, pharmaceutical, and home and personal care industries. Its smooth, low-shear pumping principle allows for the handling of products with a wide range of viscosities—from low to very high—including creams, gels, emulsions, aerated mixtures, and media containing delicate cells or organic solids in suspension. Products containing fragile solids, such as curd, can be transferred without damage due to the specially designed tri-lobe stainless steel rotors. The pump has a nominal displaceme ...

Hydraulic Pump Axial piston Variable displacement pump Manufacturer: Rexroth Model: A4VG90DA2DT2/32R - NZF02F001LH The pump is NEW and fully functional. see pictures for more details.

Hydraulic Pump Variable displacement pump Manufacturer: Rexroth Model No.: A4VG250EP4DT1/32R-NZD10F721SH R902128207 The part is technically in good condition, Nevertheless, this is a used items, which shows signs of wear or may have. see pictures for more details.

Centrifugal pump Manufacturer: KSB Model: VF 15/8 B 18.0 m³/h 87.8 mtr. Head 6.56kW The pump is new, shows traces of storage. see pictures for more details.

Centrifugal pump Manufacturer: KSB Model: VF 10/13 B 5.0 m³/h 58 mtr. Head 1.9kw The pump is in good, mint condition. Signs of use are present. see pictures for more details.

Centrifugal pump Manufacturer: KSB Model: Etanorm G050-200 68.2 m³/h Head 45 mtr. w. electric motor 1LA9164-2KA60-ZX88 15 kW The pump is in good condition. Signs of use are present. For more details, see pictures.

Feed pump Manufacturer: - Model No.: GN-40-160 with 5.5kW 400V electric motor The part is in good condition, Nevertheless, this is a used items, that shows or may show signs of wear. For more details, see pictures.

Hydraulic Pump Manufacturer: Hydromatik Model No.: A4V90EL1 . OROG101A The pump is used, but functional, see pictures. Internal number: 617 766

High-pressure centrifugal pump Grundfos CR120-6-1 used, 55 kW, 120 m³/h flow rate, 127 m head good condition

Graseby Omnifuse PCA Morphine Pumps (PCA Syringe Pumps) 5-Pack Manufacturer: Graseby Model: Omnifuse PCA Quantity: 5 Auction-ID: A1-51618-49

Graseby Omnifuse PCA Morphine Pumps (PCA Syringe Pumps) 5-Pack Manufacturer: Graseby Model: Omnifuse PCA Quantity: 5 Auction-ID: A1-51618-50

1998 Börger FL 778 Industrial Rotary Lobe Pump – Rotary Lobe Pump – Separate Pump Unit Specifications: Brand: Börger Type: FL 778 Year of construction: 1998 Serial number: 9873681, read Version: industrial rotary lobe pump / rotary lobe pump Pump Type: Positive Displacement Pump Manufacturer: Börger, Borken-Weseke, Germany CE marking: present Features: Heavy Duty Cast Iron Pump Housing Integrated gear/sync box Excellent drive shaft Drive clutch Pump chamber with inspection/service opening Various lifting eyes Mounting Feet Synchronized gear drive in which both rotors are driven relative to each other Drive and gearbox separated from the pump chamber Particularities: Offered as a separate used pump unit without drive motor. The pump is in used and partly dismantled condition. Sold in the condition as shown in the photos. Auction-ID: A1-47397-2201

Piping to 1st connection Auction-ID: A1-50943-931

230 volts, 20M3/hour, 3750 watts, unused Auction-ID: A1-40422-340

Nominal pumping speed: 95/110m³/h (50/60Hz) Ultimate pressure: 5x10-2/2x10-2mbar (50/60Hz) Power consumption at ultimate pressure: 1.3/1.5kW (50/60Hz) Gas inlet/outlet: DN50/DN40 Cooling water flow: 2.3-3l/min, cooling water connection IN/OUT with quick couplings Sound pressure level: less than 65dB(A) Multistage Roots Pump, Dry Running Certification: SEMI S2, UL 61010 Electrical data according to the nameplate: 380-480V, 3 phases/4 wires, 50/60Hz, 10A, SCCR 11kA, full load current 10A (200-230V triangle) or 5A (380-480V star), circuit diagram S9595-5 Mains connection via Harting connectors with main switch N2 purge gas connection with pressure regulator Interfaces: Sub-D connector (remote control/accessory J2-J8), RJ45, HHR connector for front hand control unit Emergency stop buttons and status LEDs (Power, Running, Warning, Alarm) Chassis with swivel castors and adjustable feet Weight ...

Peak pumping speed: 100m³/h Ultimate pressure: 6.6x10-3mbar Power consumption at ultimate pressure: 1.6kW Power consumption no-load: 0.5-1.0kW Suction Flange: DN50 ISO-KF Exhaust flange: DN25 ISO-KF Water-cooled, cooling water connection 1/4 NPT quick coupling Cooling water requirement: min. 100l/h Max. cooling water pressure: 7bar (101psi) Noise level: 55dB(A) Interfaces: SPI, RS232/485 Dry Running Multistage Roots Pump Weight: 100kg Additional N2 connector (N2 IN, max. 7bar/101psi) Additional serial port 9-pin D-Sub with DIP switches Mains connection according to the manufacturer either 200-208V or 380-400V, 3-phase, 50/60Hz Version Ed. V3.7 Accessories: Chassis with castors and pull handle. Auction-ID: A7-52036-48

Peak pumping speed: 100m³/h Ultimate pressure: 6.6x10-3mbar Power consumption at ultimate pressure: 1.6kW Power consumption no-load: 0.5-1.0kW Suction Flange: DN50 ISO-KF Exhaust flange: DN25 ISO-KF Water-cooled, cooling water connection 1/4 NPT quick coupling Cooling water requirement: min. 100l/h Max. cooling water pressure: 7bar (101psi) Noise level: 55dB(A) Interfaces: SPI, RS232/485 Dry Running Multistage Roots Pump Weight: 100kg Electrical data according to device plate: 200/208V triangle, 3-phase/3-wire, full load current 12A, 50/60Hz Version Ed. V3.5 Accessories: Handheld control unit adixen with spiral cable, P/N 112970, connected to the unit. Chassis with castors and pull handle. Auction-ID: A7-52036-45

Peak pumping speed: 100m³/h Ultimate pressure: 6.6x10-3mbar Power consumption at ultimate pressure: 1.6kW Power consumption no-load: 0.5-1.0kW Suction Flange: DN50 ISO-KF Exhaust flange: DN25 ISO-KF Water-cooled, cooling water connection 1/4 NPT quick coupling Cooling water requirement: min. 100l/h Max. cooling water pressure: 7bar (101psi) Noise level: 55dB(A) Interfaces: SPI, RS232/485 Dry Running Multistage Roots Pump Weight: 100kg Electrical data according to device plate: 208V triangle, 3-phase/3-wire, full load current 12A, 50/60Hz Version Ed. V3.5 Auction-ID: A7-52036-50

Peak pumping speed: 100m³/h Ultimate pressure: 6.6x10-3mbar Power consumption at ultimate pressure: 1.6kW Power consumption no-load: 0.5-1.0kW Suction Flange: DN50 ISO-KF Exhaust flange: DN25 ISO-KF Water-cooled, cooling water connection 1/4 NPT quick coupling Cooling water requirement: min. 100l/h Max. cooling water pressure: 7bar (101psi) Noise level: 55dB(A) Interfaces: SPI, RS232/485 Dry Running Multistage Roots Pump Weight: 100kg Mains connection according to the manufacturer either 200-208V or 380-400V, 3-phase, 50/60Hz Version Ed. V3.7 Accessories: Chassis with castors and pull handle. Auction-ID: A7-52036-47

Type: dry-running diaphragm vacuum pump/compressor of the LABOPORT series Voltage: 230V, 50Hz, 1.5A Power consumption: 0.245kW Max. overpressure: 1.0bar Device fuse: T3.15A Equipment: two pump heads with plastic connection sockets, carrying handle, power switch, housing with side ventilation grilles Accessories: Power cord. Auction-ID: A7-52036-85

Quantity: 2 pieces Cable identification: A215300-100-C6D, A215300 Batch markings: 13.27.CS and 13.05.CS Connectors: multi-pin circular connectors (pin and socket side) with union nut, one end with angle outlet Sheath: grey, flexible Auction-ID: A7-52036-31

Type: Ion getter pump (ion atomizer pump) with StarCell pumping elements and ferrite magnets Nominal pumping speed for nitrogen: 50l/s (StarCell element) Ultimate pressure: below 1x10E-11mbar Max. starting pressure: ≤5x10E-2mbar Operating time at 1x10E-6mbar: 80,000h Input flange: DN63 CF-F (4.5\" CFF), material AISI 304 ESR Additional connection: DN40 CF-F (2.75\" CFF), non-rotatable Max. bake-out temperature: 450°C without magnets, 350°C with magnets, HV cable 220°C No moving parts, resulting in vibration-free operation Operation only with separate high-voltage control unit (e.g. Agilent 4UHV or IPCMini) and HV cable - both not included Pump weight: 18kg Accessories: Attached stainless steel pipe assembly: T-piece with two small flange connections and metal bellows, cone reduction with small flange connection on the side, several small flange clamping rings and centering rings,  ...

Type: Chemical diaphragm vacuum pumping station with vacuum controller Max. pumping speed: 3.4m³/h Ultimate pressure: 1.5mbar Voltage: 207-253V, 50Hz, 3.0A Equipment: vacuum controller with rotary knob and display, separator on the suction nozzle, emission condenser on the outlet, two vacuum connections with hose fittings, carrying handle Accessories: Vacuum controller (attached), separator on suction nozzle, emission capacitor on outlet, power cord. Auction-ID: A7-52036-82

Nominal pumping speed: 3000m³/h (60Hz) Ultimate pressure: 4x10-3mbar (60Hz) Final pressure with 50 SLM purge gas: 9x10-3mbar (60Hz) Power consumption at ultimate pressure: 2.7kW (60Hz) Cooling water flow: 2.5-5l/min Sound pressure level: less than 72dB(A) Suction Flange: DN160 ISO-K Outlet Flange: DN40 ISO-KF Water-cooled, coolant connections IN/OUT with quick couplings Nitrogen purge gas connection (N2) Max. Continuous Inlet Gas Flow: 100slm Construction: multi-stage dry pump with attached roots pump type DSB3000 (P/N 125584), frequency converter Yaskawa V1000 Interfaces: J1-J8 (Sub-D, RJ45), connection HHR for handheld control unit Lubricant Gear: Fomblin (according to sticker) Electrical data according to nameplate: 380-480V star (Y) 21A or 200-230V triangle 33A, 3-phase/4-wire, 50/60Hz Weight: 800kg Accessories: Pfeiffer Vacuum P/N 125540 (S/N NRX1724416) hand control unit with sp ...

230 volts, 20M3/hour, 3750 watts, unused Auction-ID: A1-40422-332

Peak pumping speed: 100m³/h Ultimate pressure: 6.6x10-3mbar Power consumption at ultimate pressure: 1.6kW Power consumption no-load: 0.5-1.0kW Suction Flange: DN50 ISO-KF Exhaust flange: DN25 ISO-KF Water-cooled, cooling water connection 1/4 NPT quick coupling Cooling water requirement: min. 100l/h Max. cooling water pressure: 7bar (101psi) Noise level: 55dB(A) Interfaces: SPI, RS232/485 Dry Running Multistage Roots Pump Weight: 100kg Mains connection according to the manufacturer either 200-208V or 380-400V, 3-phase, 50/60Hz Version Ed. V3.7 Accessories: Chassis with castors and pull handle. Auction-ID: A7-52036-46

230 volts, 20M3/hour, 3750 watts, unused Auction-ID: A1-40422-179

Design: Chemical diaphragm vacuum pumping station with speed-controlled vacuum controller (VARIO) Max. pumping speed: 3.8m³/h Ultimate pressure: 2.0mbar Voltage: 230V, 50/60Hz, max. 2.5A Controller: vacuubrand CVC 2000, firmware V 3.02, with START and VENT buttons and pressure indicator Rear controller: power switch, IEC input and output, circular connector, RS 232 (D-Sub 9), two DIN sockets for measuring device and ventilation valve Equipment: Separator at the suction nozzle, emission capacitor at the outlet Accessories: Vacuum controller vacuubrand CVC 2000 (attached), separator on suction nozzle, emission condenser on outlet, power cable, connection cable with round plug, ventilation valve with cable, vacuum hose. Auction-ID: A7-52036-83

Peak pumping speed: 100m³/h Ultimate pressure: 6.6x10-3mbar Power consumption at ultimate pressure: 1.6kW Power consumption no-load: 0.5-1.0kW Suction Flange: DN50 ISO-KF Exhaust flange: DN25 ISO-KF Water-cooled, cooling water connection 1/4 NPT quick coupling Cooling water requirement: min. 100l/h Max. cooling water pressure: 7bar (101psi) Noise level: 55dB(A) Interfaces: SPI, RS232/485 Dry Running Multistage Roots Pump Weight: 100kg Mains connection according to the manufacturer either 200-208V or 380-400V, 3-phase, 50/60Hz Version Ed. V3.7 Accessories: Chassis with castors and pull handle. Auction-ID: A7-52036-49

Nominal pumping speed: 95/110m³/h (50/60Hz) Ultimate pressure: 5x10-2/2x10-2mbar (50/60Hz) Power consumption at ultimate pressure: 1.3/1.5kW (50/60Hz) Gas inlet/outlet: DN50/DN40 Cooling water flow: 2.3-3l/min, cooling water connection IN/OUT with quick couplings Sound pressure level: less than 65dB(A) Multistage Roots Pump, Dry Running Certification: SEMI S2, UL 61010 Electrical data according to the nameplate: 380-480V, 3 phases/4 wires, 50/60Hz, 10A, SCCR 11kA, full load current 10A (200-230V triangle) or 5A (380-480V star), circuit diagram S9595-5 Mains connection via Harting connectors with main switch N2 purge gas connection with pressure regulator Interfaces: Sub-D connector (remote control/accessory J2-J8), RJ45, HHR connector for front hand control unit Emergency stop buttons and status LEDs (Power, Running, Warning, Alarm) Chassis with swivel castors and adjustable feet Weight ...

Nominal pumping speed: 3000m³/h (60Hz) Ultimate pressure: 4x10-3mbar (60Hz) Final pressure with 50 SLM purge gas: 9x10-3mbar (60Hz) Power consumption at ultimate pressure: 2.7kW (60Hz) Cooling water flow: 2.5-5l/min Sound pressure level: less than 72dB(A) Suction Flange: DN160 ISO-K Outlet Flange: DN40 ISO-KF Water-cooled, coolant connections IN/OUT with quick couplings Nitrogen purge gas connection (N2) Max. Continuous Inlet Gas Flow: 100slm Construction: multi-stage dry pump with attached roots pump type DSB3000 (P/N 125584), frequency converter Yaskawa V1000 Interfaces: J1-J8 (Sub-D, RJ45), connection HHR for handheld control unit Lubricant Gear: Fomblin (according to sticker) Electrical data according to nameplate: 380-480V star (Y) 21A or 200-230V triangle 33A, 3-phase/4-wire, 50/60Hz Weight: 800kg Accessories: Pfeiffer Vacuum P/N 125540 (S/N NRX1718019) hand control unit with sp ...

230 volts, 20M3/hour, 3750 watts, unused Auction-ID: A1-40422-192