witt pump used for sale

Wittig Compressor ROL 65 Pressure generator from 2000, complete (closed module) 1 available 357 m3/h, 8 bar. Manufacturer: Wittig GmbH Model: ROL 65 Type: piston compressor Serial Number: 920171/17 Flow rate [m3/h]: 357 Pressure outlet [bar]: 8 Power [kW]: 37 Year of construction: 2000 Running hours [h]: – Weight [kg]: 1.071 Dimensions LxWxH [cm]: 111x90x180

Robots - Wittmann W811 Year of construction: 2010 Location: Lodz, Poland 4-axis robots: 3 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-420, Y-1200, Z-2000 Touch control panel The safety package for robots Robot with adapter and protective housing All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request

Robots - Wittmann W721 Year of construction: 2006 Location: Lodz, Poland 4-axis robots: 3 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-550, Y-1200, Z-3000 Touch control panel The safety package for robots Robot with adapter and protective housing All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request

Sprue picker - Wittmann WP80 Year of construction: 2016 Location: Lodz, Poland Travels in axes: X-100, Y-550, Z-90° Weight: 52 kg All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request

Robots - Wittmann W811 Year of construction: 2010 Location: Lodz, Poland 4-axis robots: 3 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-420, Y-1200, Z-2000 Touch control panel The safety package for robots Robot with adapter and protective housing All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request

Fan head, chamber ventilator, dorade ventilator, mushroom ventilator, ship ventilator, deck ventilator, ventilation, mushroom hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, multi-leaf damper, non-return damper, lamellar ventilator, mushroom hood -Manufacturer: Witt & Sohn, mushroom hood type PK wd 500 x black. vz -Hood opening: can be closed mechanically, hand wheel -Bolt circle Ø 550 x 12 mm -Number: 2x hood available -Price per piece -Total dimensions: Ø 905 x 820 mm -Weight: 89 kg/pc.

Transformer, transformer, converter, three-phase autotransformer -2 pieces: three-phase transformers DTST 7.5 -with: additional electronic modules -Primary: 400 V -Power: 5.5 kVA each -Dimensions: total 200/430/H740 mm -Total weight: 164 kg

heavy gear, angular gear -Translation: 1:16 -Drive shaft hollow shaft: 38 mm -Output shaft shaft: 48 mm -with claw coupling: -Number: 1 piece gear available -Price: per piece -Dimensions: 470/240/H445 mm -Weight: 59 kg/piece

Universal clamping pad -Execution: Toothed like a staircase. For use in pairs. Individual pads can be used in conjunction with clamps. -Support height: 35 to 200 mm -Material: Heat-treated steel, painted -Scope of delivery: 9 sets of different sizes -Weight: 7 kg

Universal clamping pad -Execution: Toothed like a staircase. For use in pairs. Individual pads can be used in conjunction with clamps. -Support height: 72 to 240 mm. -Material: Heat-treated steel, painted. -Scope of delivery: 3 sets of different sizes -Weight: 6.2 kg

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 15 kW -Speed: 2930 rpm -Total pressure: 400 da Pa -Volume flow: 5000 m³/h -Connection input: Ø 400 mm -Connection output: 380 x 320 mm -Dimensions: 920/760/H775 mm -Weight: 216 kg

Gearbox, planetary gearbox for hydraulic motor, hydraulic motor, oil motor, hydraulic pump -Gearbox: is unused -Drive shaft: Ø 14 mm -Output shaft: Ø 22 mm -Translation: 1:10 -universal: applicable -Number: 1x available -Price: per piece -Dimensions: 90/90/H150 mm -Weight: 4 kg/piece

Elevator motor, gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer motor Flender type: LUGA-160LQ-04Y -Manufacturer gearbox Wittur type: SRP3100 -Power: 25 kW -Speed: 59.4 rpm -Construction: B3 -Diameter shaft: Ø mm -Protection class: IP 54 -Brake -Number: 2x motors available -Price: per piece -Dimensions: 1060/660/H830 mm -Weight: 668 kg

Robots - Wittmann W832 Year of construction:2012 Description: 4-axis robots: 3 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-900, Y-1400, Z-3000 Touch control panel Robot with adapter Price: On request

Robots - Wittmann W811 Year of construction:2010 Description: 4-axis robots: 3 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-420, Y-1000, Z-1500 Touch control panel The safety package for robots Robot with adapter Price: On request

Wittmann/Battenfeld Makro Power E 450/2250 injection molding machine Year of production: 2013 Control: UNILOG B6 Closing force: 4500 KN Distance between columns: 950mm x 700mm Minimum mold mounting height: 330mm Maximum mold mounting height: 780mm Screw diameter: 65mm Specific injection pressure: 2070 bar Maximum injection weight: 980.9g ServoPower S1 package (hydraulic pump speed control for increased energy efficiency), integrated filter unit Injection unit: servo electric (Knodler) with a jet actuator, injection speed 400 mm/s (servo injection control significantly reduces electricity consumption costs and supports precise regulation of the injection process) Electric ejector with a force of 60 KN and a path of 180 mm Additional equipment: 1. Air valve 2. Cooling water flow regulator 3. Digital interface to the temperature controller (possibility to control six thermor ...

Clamping force [kN] 1100 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] 200 - 450 Injection unit Screw diameter [mm] 25 Shot weight [g] 55,8 Injection pressure [bar] 2100 Dimensions and weight (approximately) Net weight with control cabinet [t] 4,6 Dimensions (L x W x H) [m] dł. 420 x szr.140 x wys. 270 cm,

Key data: 3000 kN

Wittmann Battenfeld EcoPower 300/750 / Electric machine / production line with Wittmann W821 robot and conveyor belt Year of construction: 2012 Injection unit: Screw diameter: 45 mm Spray weight: 326 g Spray pressure: 2116 bar Dosing volume: 358 ccm Clamping unit: Clamping force: 300 t Tie bar spacing: 770x720 mm Size of clamping plates: 1250x1110 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B6S - Touchscreen Additional equipment: Production line with Wittmann W821 robot and conveyor belt Electric machine: high-speed, energy-saving and very quiet Perfect technical condition Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 12 Injection unit hardened - Bimetal Automatic tool height adjustment It is possible to change the screw diameter for fi 35, 40, 50 mm Robot Wittmann W821 Year of construction: ...

Key data: 2000 kN

Wittmann Battenfeld VM 200/525H R1520 Servo Power / Hybrid machine with one turntable Year of construction: 2013 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Spray pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 200 t Size of clamping plates: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 38,000 in automatic mode Air Valve x 4 Hydraulic Core Pull x 6 Control with hot runners Injection unit hardened - Bimetal Turntable diameter: 1520 mm Main motor of the machine - servo motor driven by inverter Horizontal injection unit with automatic injection height adjustment The machine can work with a second vertical injection unit Holder for automatic tool clamping Proportional valve on the injectio ...

Key data: 2000 kN

Wittmann Battenfeld VM 200/1000 R1755 / Vertical injection moulding machine with rotary table / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2017 Injection unit: Screw diameter: 55 mm Spraying weight: approx. 570 g Spray pressure: 1666 bar Dosing volume: 594 ccm Clamping unit: Clamping force: 200 t Tie bar spacing: 620x570 mm Size of clamping plates: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6P - Touchscreen Additional equipment: Vertical Injection Molding Machine with Rotary Table Operating hours: approx. 18,000 h in automatic mode Euromap 67 Robot Interface Air Valve x 4 Core Pull Control Control with hot runners Injection unit hardened - Bimetal Turntable diameter: 1755 mm Infrared Protective Curtains The machine was serviced by the authorized service Wittmann Battenfeld Aluminium platform with st ...

Key data: 900 kN

Wittmann Battenfeld Smart Power 90/350 / hybrid machine / operating hours: approx. 24,000 in automatic mode Year of construction: 2015 Injection unit: Screw diameter: 35 mm Spray weight: 153.8 g Injection pressure: 2083 bar Dosing volume: 169 ccm Clamping unit: Clamping force: 90 t Tie bar spacing: 470x420 mm Size of clamping plates: 680x660 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Machine in perfect technical condition Operating hours: approx. 24,000 in automatic mode Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by inverter - energy saving Proportional valve on the injection unit – precise injection It is possib ...

Key data: 50 kN

Wittmann Battenfeld MicroPower 5/7.5 / Electric motor / Operating hours: approx. 300 h in automatic mode Year of construction: 2012 Injection unit: Screw diameter: 14 mm Injection weight: approx. 2.5 g Injection pressure: 2500 bar Dosing volume: 3 ccm Clamping unit: Clamping force: 5 t Size of clamping plates: 240x400 mm Ejector: electric Control: UNILOG B6 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot Interface Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by inverter - energy saving Built-in vacuum pump from the Becker brand Automatic height adjustment of the injection unit Metrics: Weight: 1370 kg Length/Width/Height: 2.09x0.97x2.50 m Drive: Heating capacity: 2.45 kW A ...

Drum pump, hygienic ExzenterschneckenpumpeVon of the company GrünpumpenTechnische DatenTyp ds.: LDS 80.1Ser. No.: 0259 Qm³ / h 2,40N1 / min: möglichVerpackung 6,75ZahlungsmodalitätenBarzahlung pick up and transfer in advance and shipping pick up, shipping via forwarding and abroad by prior arrangement all data were listed to the best of our knowledge and belief.Errors are reserved. This auction is aimed only at professionals, dealers, and other legal persons.

; ready for operation

Waelzpistongeblaese Manufacturer: Leybold Typ: RUVAC WAU 1001 Cat No.: 11741 Suction plugs: approx. 1000m3/h Status: Generalueberholt Gewagewgewgewgewgewgew: 12 months Delivery time: from stock; ready for use

Waelz piston pump (roots blow- Manufacturer: Pfeiffer Type: WKP 1000 suction moulds: approx. 1000 m3/h Status: As new in original packaging Gewaehrleitung: 12 months from delivery Zubehoer: User Manual; Spare parts list Further accessories by arrangement; ready for use

Waelzpistongeblaese Manufacturer: Leybold Type: RUVAC WSU 2001 Cat No.: 11741 Suction moulds: approx. 2000m3/h Status: Generalueberholt Gewastperformance: 12 months (similar); ready for use

Flygt pumps model 3085 Top quality! Steel case, stainless steel shaft 2 kW 1395U RPM Flow rate corresponds to ca 30 l / s 1800 l / min Total length ca. 80 cm, 60 kg Very good condition! â?¬499 This is not a DIY part, these pumps are offered usually for twice. Preferred site 76829 Landau, pick up, delivery possible

Vacuum pump, airframe pump, rotary vane pump ALCATEL type 100-132 Fabr. No. 173082 - 3101 Year of construction: approx. 1995 Volume flow: approx. 50 m3/h Negative pressure: 0.5 mbar (indicated on the type plate)Negative pressure: - 0.9 bar (determined during test run) Motor power: 3 kW Motor speed: 1420 rpm. Mains connection: 400 Volt, 50 Hz - Oil-lubricated rotary vane pump Dimensions L x W x H: 700 x 420 x 310 mm Weight: 78 kg good condition; used

KSB VF35-5 Movitec high-pressure inline pump 11 kW Manufacturer: KSB Type: Movitec VF32 5 ID No.: 47110112 Maximum flow rate: 27 m³/h Maximum flow rate: 2850 l/min Mains voltage: 3~400/690 V Degree of protection: IP55 Power: 11 kW 21.8 A You can find more centrifugal pumps - new and used - in our shop! International shipping costs on request!

Vacuum Pump, Airframe Pump, Rotary Vane Pump ALCATEL Type 2030 Fabr. No. 11267 Year of manufacture: approx. 2000 Suction volume: approx. 650 L/min. / 39 m3/h Vacuum: 0.93 bar (determined during test run) Engine power: 1.1 kW Motor speed: 1400 rpm. Power supply: 380 volts, 50 Hz Dimensions L x W x H: 620 x 200 x 580 mm Weight: 53 kg good condition; used

Kat-No 08-1514 in very good condition - checked! Pump diagnostics: Pressure test: 4 bar Suction capacity up to -1.5 bar: -0.5 Conveyor pressure: 3 bar Power: 23,500 liters/h Ampere min/max: 3.8 Other pump types or our complete range (tanks, pumps, filters, beverage technology) on request! For questions call 09353 909050 or 0171 651 8248 Fax: 09353 9090522 All prices are ex works, plus Vat Intermediate sale reserved. Freight cost share: by scope of delivery Sightseeing is also possible on weekends or evenings by appointment.

Kat-No 08-1632 in very good condition HxLxW: 56x78x30 cm For further information: Tel: 09353 909050 or Fax: 09353 9090522 Mobile: 0171 6518248 All prices are ex works plus law VAT Intermediate sale reserved Freight cost share: by scope of delivery Delivery time: immediately from stock Sightseeing is also possible in the evening or on weekends by appointment.

Cat. No. 07-1268 in very good condition Type SEP 100.1 Design: H1 PO1 Dimensions: Length: 143 cm Width: 56 cm Height: 143 cm Capacity: 60 litres/min., 3600 l/h Pressure: 6 bar Engine power: 4 kW DN 65 For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. Sightseeing is also possible in the evening and on weekends by appointment. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery

Kat. No. 11-3290 in a very good condition 5000 - 10,000 litres Measurements and weight: HxLxB: 75 x 130 x 30 cm weight: 85 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Oel-Diffusion pump Manufacturer: Leybold Type: DIP 50,000 Status: used Technical data Product: DIP 50000 Catalogue: 22240 Connection flange Suction side: DN 1000 ISO-F Connection flange Print side: DN 160 ISO-K Suction Below 1.0 x 10-4 mbar / 7.5 x 10-5 Torr: 50000 l/s working range: 1.0 x 10-2 - 5.0 x 10-7 mbar 7.5 x 10-3 - 3.8 x 10-7 Torr Final pressure: < 5.0 x 10-7 mbar < 3.8 x 10-7 Torr Max. pre-vacuum pressure: 6.0 x 10-2 mbar 4.5 x 10-2 Torr Equipment: Pump is delivered without equipment quantity of equipment min.: 12.0 l 12.7 qt max.: 25.0 l 26.4 qt grid connection: 3-ph Y, 400 V, 50/60 Hz Heating capacity: 24 kW Number of heating cartridges: 24 Heating time: < 30 min Number of cooling water circuits: 3 Cooling water minimum pump: 1500 l/h 6.6 gal/min Duesenhut steam barrier: 150 l/h 0.66 gal/min Max. Cooling water pressure: 6 bar 87 psi Cooling water connection pump: 1/ ...

Oil diffusion pump Manufacturer: Leybold type: DIP 50,000 Status: used Technical data Product: DIP 50000 cat. No.: 22240 Suction side connection flange: DN 1000 ISO-F Connection flange printed page: DN 160 ISO-K Pumping speed for air below 1.0 x 10-4 mbar / 7.5 x 10-5 Torr: 50000 l / s Working range: 1.0 x 10-2 - 5.0 x 10-7 mbar 7.5 x 10-3 - 3.8 x 10-7 Torr Final total pressure: < 5.0 x 10-7 mbar < 3.8 x 10-7 Torr Maximum permissible forevacuum pressure: 6.0 x 10-2 mbar 4.5 x 10-2 Torr Resources: Pump delivered without resources Amount of resources min: 12.0 l 12.7 qt Max: 25.0 l 26.4 qt Power supply: 3-ph Y, 400 V, 50/60 Hz Heating power: 24 kW Number of cartridges: 24 Heating-up time: < 30 min Number of cooling circuits: 3 Minimal cooling water Pump: 1500 l / h 6,6 gal / min Jets Hat vapor barrier: 150 l / h 0.66 gal / min Cooling water pressure: 6 ba ...

Warman ®, AH, ® pump, AH, 4/3 from the cyclone supply up to regrinding, Flotation and departures is the Warman ®, AH, ® pump the best choice. 3 pumps are available!

Immediately applicable

brand new pump / tank column / data acquisition / diesel tank system Type eco 55 - not calibrated, Capacity up to approx. 55 l/min. suitable for diesel fuel, incl. - Tank machine with PC software (2,000 users) - 2 driver/vehicle identification system - Identification via transponder technology - USB interface for data retrieval - Wing cell pump with single-phase asynchronous motor - 230 volts - Oval wheel counter with pulse generator, accuracy = approx. +/- 0.5% - Inclined seat filter / dirt filter with fine sieve - 4 m dispensing hose DN 19 with type-approved automatic tap valve, incl. swivel joint and tap hose holder - Suction height approx. 3.5 m - Robust powder-coated steel plate housing Dimensions: approx. 1,410 x 520 x 275 mm - two-line, illuminated monochrome display, font height 8 or 19 mm - Tank data storage for up to 10,0 ...

Horn pump Cabinet consisting of: -2 x Horn pump MP 5 (700 l / min) -&amp;gt; For heating oil, diesel and bio-diesel Technical data: Max capacity: 700 l / min Supply voltage: 400 / 50 V / Hz Capacity: 2, 5kW Inlet: DN 80 Pressure connection: DN 80 Maximum suction height: 4, 5 m Protection class: IP 44 Pump Cabinet is painted and fully functional! The pumps can be expanded like at extra charge out of the closet, but we would prefer a sale as a complete package!

; ready for operation

Screw Vacuum Pump - Unused Manufacturer: Alcatel / Adixen Type: A 300 P Motor: 380-460V Status: Used; As Performance: 12 months Suction power: 320 m3/h connection: ISO-K 63 final pressure: approx. 1.2x10-2 mbar (abs.) Including: user manual ; ready for use

; ready for operation

Claw vacuum pump dry compression Manufacturer: Busch Type: Mink MM 1402 AV Motor: DS 400V suction power: 400 m3/h Final pressure: approx. 200 mbar (abs.) Zubehoer: Operating instructions delivery time: by arrangement; ready for use

Waelz piston pump booster Manufacturer: Busch Type: Panda WV 0500 C/B and Panda WV 1000 C/B available suction swells: 500 - 1000 m3/h Performance: 12 months Status: Generalueberholt Delivery time: by arrangement; ready for use

Locking valve vacuum pump DK200 Status: Generalueberholt Gewaehrleistung: 12 months Manufacturer: Leybold Type: DK200 Engine rated power: 5.5KW nominal suction digesters: 200m3/h Final pressure without gasb.: small 5x10e-3 Zubehoer: Operating instructions with spare parts list

Status: New Manufacturer: Pfeiffer Type: TMH 064 Mod.-Nr.: PM P02 366 Remark To operateonly with appropriate pre pump and control. delivery time: on request; ready for use

Rotary vane vane vacuum pump- packaging Manufacturer: Busch Type: 251-512 Status: used, tested! Inclusive: Oil filling delivery time: from stock!; ready for use

System: piston diaphragm pump Manufacturer: Abel Type: FDG 322 Machine number: 3506 Year of construction: 1989 Performance: 15 m3 Pressure: 15 bar Engine: BBC, 11 kW, 50 Hz