We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,832 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
inlet wire diameter up to 9 mm finished wire diameter 10% reduction number of drafts 1 diameter of capstan 500 mm speed -meters/sek 5
used
Description: X axis 350 x 250 x 256 mm Table dimensions 750 x 550 mm Load up to 450 kg Wire tension 0-25 Nm wire diameter 0 2 - 0 33 mm weight approx.: 2,590 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,700 x 2,200 mm
used
We offer wire looms asking for current offers. abc.steinfels-kg.de
used
Wire belt with FU, Cabinet Make: Sprematec Length: 1000 mm Width: 600 mm
used
Conveyor belt, wire belt with middle drive Length: approx. 5 m Working width: 300 mm
used
Wire belt -Length: 3250 mm -Width: 600 mm Gear motor
used
Wire belt with variable speed gear motor - Length: 3200 mm - Width: 600 mm - Splitting 12,7 mm
used
Wire stitcher Acme Champion Model A Year 1960 Capacity 6 mm Details for blocks & pamphlets Available direct
used
Wire comb locking machine; good condition; suitable for division 3:1; Max. Binding width 457mm (A3+); Max. Staerke 12mm; with 2 large rolls of material in white and silver.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
used
Wire range: a) up to 800 N/mm2 = 6.0 - 15.0 mm b) to 1200 N/mm2 = 6.0 - 12.0 mm c) to 1400 N/mm 2 = 6.0 - 11.0 mm section: up to 14,000 mm feed speed: 22 - 120 mtr./min machine was partially overhauled and repainted; very good
used
Wire staerke range: 2.0 - 6.0 mm sectional slats: max. 500 mm suitable for round, profile and flat drainage; ready for use
used
Wire rod: 3.0 - 5.5 mm Nail length: 15 - 80 mm Capacity: 150/300 pcs/min -for steel rod; very good
used
Wire diameter range: 8.0 - 16.0 mm section sections: up to 14,500 mm feed speed: up to 50 mtr/min machine has been repaired, repainted, repainted + new electrics; ready for use
used
Wire staerke range: 1.8 - 3.4 mm nail length: 13 - 80 mm power: 550 naegel/min partially overtaken and repainted; very good
used
POLYGRAPH wire stitching machine Serial No. 0371054 good working condition | test possible in our warehouse ----------------------------- Test in our stock is possible. Purchase only available for commercial customers with proof We sell the machine "as is", no warrenty, no guaranty. We don't take the goods back. Price is LOT. Shipping is not included. An invoice with VAT is created. (Price incl. 19% VAT = EUR 1547.00) Export price: € 1300,00 + shipping
used
Machine was partially overhauled in 2014 wire diameter range: 4.0 - 10.0 mm section sections: max. 3,000 mm feed speed: 90/130 mtr./in; ready for immediate use
used
Wire diameter range: 2.5 - 6.0 mm feed wheel: unbrittle feed speed: max. 36 mtr./min Bending angle: 0 - 340 ; ready for use
used
Wire diameter range: 4.0 - 10.0 mm section sections: up to 4,000 mm feed speed: 90 / 120 mtr./min; ready for use
used
Wire diameter range: 8.0 - 12.0 mm section slats: max. 5,550 mm feed speed: 70 - 100 mtr./min directional fluegel with hyperbolic rollers; good
used
Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Technical data Working table: Length: 900 mm Width: 600 mm Max. dimensions of work piece: Length: 1200 mm Width: 700 mm Height: 400 mm Table load max.: 1500 kg Longitudinal traverse (X-axis): 550 mm Cross traverse (Y-axis): 350 mm Vertical travel (Z axis): 400 mm Taper-cut +/-: 30 /400mm ° Diameter of electrode wire: from: 0.33 mm up to: 0.10 mm Dielectric aggregate: Contents: 1200 l Air connect: 6 - 7 bar Voltage 50 Hz 3x: 400 Volt Total power required: 10 kVA Weight total installation approx.: 2850 kg Overall dimensions machine: Length: 2810 mm Width: 2600 mm Height: 2080 mm Various accessories: Cooling unit for fluttines: HITEMA
used
Wire diameter range: 1.5 - 7.0 mm section sections: max. 2,000 mm feed speed: 5 - 120 mter./min. machine has been completely repainted; very good
used
Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Technical data Working table: Length: 450 mm Width: 400 mm Max. dimensions of work piece: Length: 400 mm Width: 450 mm Height: 300 mm Table load max.: 200 kg Longitudinal traverse (X-axis): 200 mm Cross traverse (Y-axis): 300 mm Vertical travel (Z axis): 300 mm W axis: 230 mm Diameter of electrode wire: from: 0.3 mm up to: 3 mm Voltage 50 Hz 3x: 440 Volt Total power required: 4 kVA Weight total installation approx.: 850 kg Overall dimensions machine: Length: 1390 mm Width: 990 mm Height: 2080 mm
used
wire diameter range: 2,0 - 6,0 mm mesh width: 15 - 80 mm working width: max. 2.000 mm; ready for operation
used
Wire staerke range: 1.8 - 3.1 mm pins: 13 - 80 mm Power: 550 naegel/min repainted; good
used
Wire diameter range: 1.0 - 4.0 mm section sections: max. 2,000 mm feed speed: 5 - 90 mtr./min.; ready for use
used
HITACHI WIRE EDM MACHINE MODEL MS 250 H-CUT 8Q X-AXIS STROKE: 1030 MM Y-AXIS STROKE: 810 MM Z-AXIS STROKE: 530 MM
used
Conveyor belt / wire belt / mesh belt -Length: approx. 4350 mm -Working width: 300 mm -belts are similar to the pictures
used
Travel x 350 mm y 250 mm z 220 mm Water bath machine Automatic wire threading Glass scales x / y incl. box for large coils incl. cooler incl. functional guarantee
used
Key data: 500 , 350 , 300
Travel X 500 / Y 350 / Z 300, Water bath machine, automatic wire threading, incl. 20 KG option incl. cooler
used
Wire brush round, round grinding brush, braid round brush, grinding wheel, cup wheel -Inside: Ø 25 mm -Outer: Ø 300 mm -Width: 25 mm -Number: 5x discs available -Price: per piece -Weight: 2.5 kg
used
Wire brush round, round grinding brush, braid round brush, grinding wheel, cup wheel -Inside: Ø 32 mm -Outer: Ø 200 mm -Width: 25 mm -Number: 3x discs available -Price: per piece -Weight: 1 kg
used
For sale wire EDM fanuc tape cut - w2 Year 1989 Kept and running well available immediately for viewing
used
Sodick VL400Q EDM Wire Cutting Machine Machine is in excellent condition X : 400 mm Y : 300 mm Z : 220 mm
used
Wire cutting edm machine Manufacturer Accutex Model AU-3iA Year 2008
used
Sodick AQ750L EDM Wire Cutting Machine X : 750 mm Y : 500 mm Z : 400 mm Machine is in very good condition
used
Sodick AQ900L EDM Wire Cutting Machine X : 900 mm Y : 600 mm Z : 400 mm (U/V)mm 900X620 Machine is in good condition
used
Sodick VL600Q EDM Wire Cutting Machine Machine is in good X : 600 mm Y: 400 mm Z : 270 mm
used
AGIECUT CLASSIC 2S wire cutter 2004 AGIECUT CLASSIC 2S
used
Charmilles 31 EDM Wire Cutting Machine Machine is in good working condition
used
Wire erosion for sale X : 500 mm Y : 350 mm Z : 300 mm
used
Charmilles Robifil 640 CC EDM Wire Cutting Machine X : 800 mm Y : 550 mm Z : 510 mm
used
Makino SP43 EDM Wire Cutting Machine Machine is in very good condition Double generator X : 450 mm Y : 300 mm Z : 320 mm
used
Sodick AQ-750L EDM Wire Cutting Machine Machine is in working condition 750X500X400
used
wire diameter 4-10mm feeding length oo speed - meter/min 35-72
used
3D - CNC wire diameter 5-12 mm feeding length unlimited
used
Wire EDM machine 1 Faulty electronic board The machine is located in France.
used
Charmilles Robofil 440 SL EDM Wire Cutting Machine X : 550 mm Y : 350 mm Z : 400 mm
used
Sodick AQ535L WEDM machine. Well looked after and still in production. Linear motors, so still accurate. With wire chopper.
used
Chmer CW 643S EDM Wire Cutting Machine Table : 600 mm x 400 mm Z : 300 mm There is small issues needs to be fixed like water leakage
used
Steel cables Wire ropes Slings made of steel Length: 20 m Diameter: 10 mm 1 end open / 1 end with safety eye hook Load capacity: unknown 2 pieces available