wire used for sale

Cored wire electrode, CrNi cored wire based on rutile slag for MAG welding OERLIKON FLUXINOX 309 L DIN 8556-23 12 L W.W. -No. 1.4332 ASME Sec.II/C/SFA-5.22/E 309 L T-1 Diameter: Ø 1.2 mm Coil K300 Quantity: 15 kg New ! Dimensions: 300 x 300 x 105 mm

MIG Aluminum Welding Wire ALCAN MT-AL 4043A ALSi5 3.2245 Diameter: Ø 1.6 mm coil: K300 Quantity: 7 kg New ! Dimensions: 310 x 110 x 320 mm

Cored wire electrode, CrNi cored wire based on rutile slag for MAG welding OERLIKON FLUXINOX 308 L DIN 8556-19 2 L W. -No. 1.4316 ASME Sec.II/C/SFA-5.22/E 308 L T-1 Diameter: Ø 1.2 mm coil K300 Quantity: 10 kg New ! Dimensions: 300 x 300 x 105 mm

MIG Aluminum Welding Wire ALCAN MT-AL 5356 S-ALMg 5 3.3556 Diameter: Ø 1.6 mm coil: K300 Quantity: 7 kg New ! Dimensions: 310 x 110 x 320 mm

MIG Aluminum Welding Wire MTC MT-MIGAL 1450 SG/AlMg 99.5 Ti 3.0805 Diameter: Ø 1.6mm Coil: K300 Quantity: 6kg New ! Dimensions: 300 x 110 x 310 mm

MIG Stainless Steel Welding Wire BÖHLER SAS4-IG Si 1.4576 Diameter: Ø 1.0 mm Reel: Ø 300 / 370 mm Quantity: 12 kg New ! Dimension: 370 x 370 x 90 mm

Wire feed case for inert gas welding machine, inert gas device, wire feed case, wire feed device -Manufacturer: Oerlikon wire feeder, gas-cooled -Type: unfortunately without type designation -Dimensions: 640/280/H400 mm -Total weight: 19.6 kg

Wire feeder case for MIG/MAG welding machine, MIG/MAG welding machine, wire feeder case, wire feeder -Wire feeder case: with intermediate hose package, water-cooled -Wire feed case: 4-roller drive, Ankarsrum motor -Hose package: Length 15 m -Transport dimensions: 920/630/H300 mm -Total weight: 41 kg

MIG Aluminum Welding Wire ALCAN MT-AL 5183 S-ALMg 4.5 Mn 3.3548 Diameter: Ø 1.6 mm coil: Ø 300 mm Quantity: 6.5 kg New ! Dimensions: 310 x 110 x 320 mm

MIG Stainless Steel Welding Wire BÖHLER SAS2-IG 1.4551 Diameter: Ø 1.2 mm Reel: Ø 300 / 370 mm Quantity: 12 kg New ! Dimension: 370 x 370 x 90 mm

MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ 2-304 -Length: 8.5 m -Connector: 5-pin -Transport dimensions: 580/450/H130 mm -Weight: 7.1 kg

MIG Stainless Steel Welding Wire BÖHLER SAS4-IG 1.4576 Diameter: Ø 1.6 mm Reel: Ø 300 / 370 mm Quantity: 12 kg New ! Dimension: 370 x 370 x 90 mm

45 cycles per minute with chamfering 60 cycles per minute without chamfering Maximum cutting length 700 mm, width 400 mm

MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ -Length: 8 m -Connector: 5-pin -Transport dimensions: 590/500/H150 mm -Weight: 8.3 kg

MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ -Length: 8 m -Connector: 5-pin -Transport dimensions: 600/500/H130 mm -Weight: 6 kg

Hello

Stainless Steel Welding Wire, MIG Wire Electrode, Solid Wire AVESTA 316LSI/SKRSI DIN 8556 SG X 2 CRNIMO 19 12 W. -No. 1.4430 Diameter: Ø 1.6 mm Coil: Ø 300 mm Quantity: 12 kg New ! Dimensions: 310 x 110 x 300 mm

Multi-wire cutter with slat feed and chunk cutter 13 stones in NF format with three-sided chamfering. Batten length 1340 mm

Used R&B RECORD 12 wierhooder 12000 BPHTechnical Specifications & Performance DataThe Wirehooder RECORD 12 with double distributor is a high-efficiency machine engineered for securing wire cages on sparkling wine and similar glass bottles in industrial packaging environments. Designed for continuous operation in a used bottling line or as a standalone station, it delivers reliable, second hand performance for beverage production where consistency and throughput are essential.Model: RECORD 12Maximum speed: 12,000 bphRotation direction: Clockwise, left to rightYear of manufacture: 2016Double distributor: Supports 2-leg and 4-leg wire cagesDual magazines: Approx. 6,000 cages eachContainer handling: Designed for Glass bottle handlingAdvanced Automation & Control SystemsEngineered to reduce changeover time and operator intervention, this wirehooder integrates recipe-driven automation and prec ...

Wire electrode, SG2 welding wire, welding wire -Böhler: EMK 6 D -AWS. ER70S-6 -Wire thickness: 0.8 mm -Price: per piece -Quantity: 1 pieces -Weight: 15 kg

Stainless Steel Welding Wire, MAG Wire Electrode AVESTA 316L-SI/SKR-SI DIN 8556 SG X 2 CRNIMO 19 12 W. -No. 1.4430 Diameter: Ø 1.0 mm Coil: K300 Quantity: 15 kg New ! Dimensions: 310 x 110 x 300 mm

weight: 200 kg : 931855500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

180 m Wire Rope Tractel Tirak Rope Ø 9 mm on Reel Rope length 180 m. Diameter 9 mm (5x19). With drum reel 300 for max. 200 m. Quality features: galvanized steel rope, suitable for tirak tested. Packing with hook and tip. Areas of application & details: Original Tractel Tirak wire rope 9 mm for winches and hoists, approved 5×19 steel wire rope for Tirak winches, continuous winches, unused industrial wire rope with test sticker and approval, 180 meter rope on original reel, suitable for construction site winches, façade construction, elevator technology, assembly and lifting work, platform construction and industrial winches, ideal for load transport, wire rope hoisting equipment, multi-purpose hoist rope and professional lifting technology, also usable for grab hoist applications, Forestry technology, logging work and forestry winches, forestry rope, winch cables. Applicatio ...

Cored Wire Electrode, Stainless Steel Welding Wire, MAG Wire Electrode BÖHLER UTP AF 6808Mo DIN 8556 MFX2 CRNIMON 22 8 W. -No. 1.4462 Diameter: Ø 1.2 mm coil K300 Quantity: 15 kg New ! Dimension: 310 x 100 x 310 mm

: ja positioning automatic: ja documentation: ja : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wire rope Tractel Tirak rope Ø 9 mm - 85 m on reel Rope length 85 m. Diameter 9 mm (5x19). With 1 piece drum reel. Quality features: galvanized steel rope, suitable for tirak tested. Packing with hook and tip. Areas of application & details: Original Tractel Tirak wire rope 9 mm for winches and hoists, approved 5×19 steel wire rope for Tirak winches, continuous winches, unused industrial wire rope with test sticker and approval, 85 meter rope on original reel, suitable for construction site winches, façade construction, elevator technology, assembly and lifting work, platform construction and industrial winches, ideal for load transport, wire rope hoisting equipment, multi-purpose hoist rope and professional lifting technology, additionally usable for grab hoist applications, Forestry technology, logging work and forestry winches, forestry rope, winch cables. Applications & ...

Cored wire electrode, CrNi cored wire based on rutile slag for MAG welding OERLIKON FLUXINOX 309 Mo L DIN 8556-23 13 2 L W. -No. 1.4459 Diameter: Ø 1.2 mm coil K300 Quantity: 15 kg New !' Dimension: 300 x 300 x 110 mm

HSK63-B,F Test Mandrel Suitable for Vollmer machine types: QWD 750 / QWD 760 / QWD 750 H / QWD 760 H / VPulse 500 and all models from the QXD series (200/250/400)

This 5-axis AGIE Agiecut Challenge 2 wire EDM machine was manufactured in 2002. It has a weight of 3600 kg and operates at a power of 9 kVA. The machine includes additional equipment such as an ICS Cool Energy i-Chiller external cooling unit and a standalone operator console terminal with screen, keyboard, and mouse. If you are looking to get high-quality wire EDM capabilities, consider the AGIE Agiecut Challenge 2 machine we have for sale. Contact us for further details.

Round Stitching Wire Set, Round Stitching Wire Galvanized PAGUS 1a Round Stitching Wire No. 30 Diameter: Ø 0.35 mm Coil: Ø 300 mm Quantity: 7 x 15 kg Set consists of 7 rolls of circular basting wire ! New !' Dimensions: 630 x 310 x 500 mm

Key data: 450 mm, 320 mm, 162 mm

For sale Charmilles wire EDM machine type Robofil 4020.1. The machine is in very good condition. Still to be seen under power. Lots of accessories!

Equipment: wire pay-off reel, mechanical flywheel, two wire guide tracks, enclosed straightening and cutting section, mechanical cam, eccentric and lever controls, discharge chute for cut wires, pneumatic service unit and pneumatic lines, retrofitted control panel with digital display, emergency stop button and transparent safety cover. An on-site inspection is possible.

Round Stitching Wire Set, Round Stitching Wire Galvanized PAGUS 1a Round Stitching Wire No. 28 Diameter: Ø 0.41 mm Coil: Ø 300 mm Quantity: 7 x 14.5 kg Set consists of 7 rolls of circular stitching wire ! New !' Dimensions: 630 x 310 x 500 mm

Capacity: 900 to 3.000 bottles/hour Wirehood: Four-wire closures Bottle height: approx. 235 - 360 mm Magazine capacity: 1.600 corks

Shielded Welding Wire OERLIKON CARBOFIL 1 R EN 440 - G 46 2 M G3 Si 1 Material: 1.0 5125 Diameter: Ø 1.2 mm Coil: Ø 500 mm Quantity: approx. 185 kg New !' Dimension: 500 x 500 x 320 mm

Machine is in good technical condition, a visit and a test run are possible by prior arrangement.

Brush deburring machine, wire brush RAIMANN & CIE USM 58 Bj: 1987 Rürsten diameter approx. 280 mm Table dimensions 500 x 160 mm Table heights and distance adjustable 1500 u. 3000 rpm 2,2,2,000 rpm 2 kW 380 V Dimensions: 700 x 600 x 700 mm

Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Wire feeder Plain text display Compression Force Monitoring Wire straightener Bosch Stripping Devices Bracket and brush motor with mounted tool W32/1-32 Soundproof booth Fäßerb CU wire with stamped parts Switchboard Item condition: very good Description of the manufacturer, deviations possible. You purchase the machine as shown in the pictures. Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

This 3-axis ONA AE600 Wire EDM machine was manufactured in 2007. It features an X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine can accommodate workpieces up to 1,300 mm in length, 1,040 mm in width, and 500 mm in height, with a maximum weight of 5,000 kg. If you are looking to get high-quality wire capabilities, consider the ONA AE600 machine we have for sale. Contact us for further details.

This 4-axis ONA KE500 wire EDM machine was manufactured in 2004. It features a maximum workpiece weight capacity of 5000 kg and a Z-axis travel of 400 mm. The machine offers impressive X-Y travel dimensions of 700 x 500 mm and U-V travel of 460 x 460 mm. If you are looking to get high-quality wire EDM capabilities, consider the ONA KE500 machine we have for sale. Contact us for further details.

This 3-axis CHARMILLES Robofil 240 CC was manufactured in 2003. It features a travel range of 350 x 220 x 220 mm and can accommodate workpieces up to 1000 x 550 mm with a maximum weight of 750 kg. The machine has a robust table size of 680 x 450 mm. If you are looking to get high-quality wire EDM capabilities, consider the CHARMILLES Robofil 240 CC machine we have for sale. Contact us for further details.

table length: 500 mm table width: 350 mm ampere: 65 A Control: AGIEVISION 5 CNC total power requirement: 20 kW weight of the machine ca.: 4000 kg dimensions of the machine ca.: m A G I E (Switzerland) CNC - Controlled Wire Cutting EDM Machine Model AGIECUT PROGRESS V 3, Year 2007 Working range, X Y Z (=height) 500 x 350 x 426 mm Wire head, U-V axis (helical/taper cuts) + / - 30 °/ +/- 70 mm Resolution of axes 0.0001 mm Speed for positioning the axes up to 3 m/Min. Tolerances (If machine is new) 4 µ Workpiece dimensions, L x W x H max. 1.050 x 650 x 420 mm Max.weight of workpiece with/w.o. Dieelektricum 400/800 kg Clamping System Universal Beams with fixing holes Cutting wire Ø 0.2 – 0.33 mm Size of wire roll up to 25 kg Cutting speed of wire  ...

Key data: 3 mm, 3000 mm, 130 m/min

One used Ravni starigtening and cutting machine for 3.0 to 8.0mm wire. Cutting length: 3.000mm Machine is equipped with double pay off for 3 t spools and dust abstructor Year: 2014

This 3-axis CHARMILLES ROBOFIL 240 CC was manufactured in 2003. It has a machine weight of 2100 kg and operates on a voltage of 400 V with a current of 18 A. If you are looking to get high-quality wire EDM capabilities, consider the CHARMILLES ROBOFIL 240 CC machine we have for sale. Contact us for further details.

ELBOR MAG - Wire Electrode Type SG-3 Condition Mint EN ISO 14341-A- (2011) G 46 4M21 4Si1/G42 3C1 AWS A5. 18-05: ER70S-6 Diameter 1.0 mm 250 kg - Drum approx. 230 kg still available in the barrel

wire electrode, welding wire, welding wire -Manufacturer: Elgar, started roll of MAG wire electrode -Type: Cromacore DW-309L O1.2mm -Dimension: O 300/100 mm -Weight roll: 10.1 kg

Ref. 499 Stitching machine Agrafix BX Ma No. 17007 Condition: Used machine / Cleaned and checked / Functional Ref. 499 Stitching machine Agrafix BX Serial 17007 Condition: Used machine / Cleaned and checked / Good working condition

ELBOR MAG wire electrode Type SG-3 Condition as good as new-original packaging EN ISO 14341-A-G4 G46 Si1 4M/G42 3C AWS A5.18-05: ER70S-6 15kg - Pack Diameter 0.8 mm

Wire Stitching Machine Polygraph 703/1T Drahtheftmaschine / Wire Stitching Machine Polygraph 703/1T 1-head wire stitcher for block- and saddle stapling. Year - Serial-No. 21/4