129,238 used machines on RESALE, but how to find them? Machine Search
Double head wire stitching machine Hohner Accord 25/40; good condition; cleaned and tested; Max. Stapling thickness 25mm with clamp slung and 40mm on both sides; 2 staple heads; Length bracket back 14mm. Double head wire stitching machine Hohner Accord 25/40; good condition; cleaned and checked; max.thikness 25mm or 40mm by both sides; 2 heads; lenght of clamp 14mm.
wire electrode, welding wire, welding wire -Manufacturer: Magmaweld, MAG wire electrode SG 2 CY 4243 -Type: MG 2 Ø 1.2mm -Dimension: Ø 300 /100 mm -Weight roll: 15.5 kg -Number: 1 piece available
wire electrode, welding wire, welding wire -Manufacturer: Bohler, started roll of MAG wire electrode -Type: SG 3 O 1.2mm -Dimension: O 300 /100 mm -Weight reel: 14.2 kg
Key data: 500 , 350 , 300
Travel X 500 / Y 350 / Z 300, Water bath machine, automatic wire threading, incl. 20 KG option incl. cooler
Wire EDM machine SODICK A 600 manufactured in 1997. Technical parameters of the SODICK A 600 EDM machine: - table travel (X axis): 600 mm - table travel (Y axis): 400 mm - Z axis travel: 270 mm - maximum dimensions of the processed part (width x depth x height): 800 x 550 x 260 mm - maximum weight of the workpiece: 900 - auxiliary table travel (U axis x V axis): 70 x 70 mm - wire diameter: 0.1 ~ 0.3 mm - maximum wire speed: 250 mm / sec. - wire tension: 0.2 ~ 2.8 kgf - cutting inclination at an angle: + -15 degrees per 100 mm of thickness - height from the floor to the surface of the working table: 1000 mm - machine tool dimensions (width x depth x height): 2188 x 2645 x 2100 mm - machine tool weight: 3700 kg
Steel cables Wire ropes Slings made of steel Length: 10 m Diameter: 25 mm Hoses right/left Load capacity: 5 to. 10 pieces available
Schroeder & Bauer WB 32-1 Universal wire and belt bending machine Wire feed Plain text display Press force monitoring Wire straightener Bosch stripping devices Bracket and brush motor with mounted tool W32/1-32 Soundproof cabin Fäßerb CU wire with stamped parts Switchboard Item condition: very good Description of the manufacturer, deviations possible. You purchase the machine as it can be seen in the pictures. The punch bending machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines
wire electrode, welding wire, welding wire -Manufacturer: Elga, started roll of inert gas wire electrode -Type: Cromacore DW-309L O1.2mm -Dimension: O 300 /105 mm -Weight roll: 5 kg
X – Axis Travel (600 mm) Y – Axis Travel (400 mm) Z – Axis Travel (270 mm) U, V Axis Travel (80 x 80 mm) Wire Diameter Range (min ~ max) (0.10 ~ 0.30 mm) Work Tank Dimensions (W x D) (1040 x 780 mm) Maximum Workpiece Weight (850 kg)
Wire-O punching machine Make Bomco Model EPS-330 Year Working width 330 mm Tools 3:1 Wire-O tool with round holes Details Electric, other tools can be purchased Available direct
Wire electrode, welding wire, welding wire -Material: stainless steel -Manufacturer: Eurotrode, started roll of shielding gas wire electrode -Type: M 8820 1.4829 Ø 1.2 mm -Dimensions: Ø 300 / 100 mm -Weight roll: 5.1 kg
Wire stitching machine Agrafix BX; good condition; cleaned and tested; Stitching thickness 25mm with the clamp folded down, 40mm with the clamp not folded; block or saddle stitching; Clamp width 14mm; suitable for round or flat wire. Wire stitcher Agrafix BX; good condition; cleaned and checked; max.stitching thikness by clinched staple 25mm, 40mm by stabbed from both sides; flat or saddle stitching; crown width 14mm; used for round of flat wire.
Wire electrode, welding wire, welding wire -Manufacturer: Avesta, welding wire 316L-Si/SKR-Si -Thickness: Ø 1.2 mm -Dimensions: Ø 300/100 mm -Roll weight: 15.9 kg
wire electrode, welding wire, welding wire -Manufacturer: MTC, welding wire G 19 9 Nb Si 1.4551i -Type: MT-347 O1.2mm -Dimension: O 300/110 mm -Weight reel: 15.7 kg
Wire electrode, welding wire, welding wire -Manufacturer: Tetra, welding wire V 309 LG -Thickness: Ø 1.2 mm -Dimensions: Ø 300/100 mm -Weight of roller: 12 kg
Demo machine Semi-automatic Equipped with 5 tools : - 2:1 1" - 3:1 3/8" New Style - 3:1 1/2" New Style - 5/16" - 2/1 3/4" Binding length : 3:1 : max 60 – min 4 2:1 : max 41 - min 4 Book thickness : 3 mm to 22 mm Output : 600/1200 per hour
Wire-O closing machine Make JBI Model MAG C54 Year 1991 Workingwidth 540 mm Details for closing all sizes Available Direct
wire electrode, welding wire, welding wire -Gas wire electrode: SG2 CY 42 43, started roll -Material: 1.5125 O 1.00 mm -Dimension: O 300 /105 mm -Weight reel: 3.9 kg
Wire electrode, welding wire, welding wire -Material: stainless steel -Shielded gas wire electrode: started roll -Type: 318 Ø 1.00 mm -Dimensions: Ø 300 / 105 mm -Weight roll: 13.8 kg
Wire electrode, welding wire, welding wire, cored wire -Manufacturer: Bohler, started role inert gas wire electrode -Type: AVESTA Cored Wire FCW-2D 316L/SKR O 1.2 mm -Dimension: O 300 /100 mm -Weight reel: 11.9 kg
Hohner Economy 25/40 wire stitching machine; good condition; cleaned and tested; 1 stitching head; Yeast thickness max.25mm with the clamp folded down, 40mm with the clamp not folded down; Saddle or block stitching. Wire stitcher Hohner Economy 25/40; good condition; cleaned and chekced; one head; max.stitching height 25mm on block or 40mm for saddle stitching; for block or saddle stitching.
Wire-O punching machine Make JBI Model K50T Year 1991 Workingwidth 500 mm Tools 1 x 3:1 with round holes for books, 1 x 3:1 with round holes for calenders Available Direct
Equipment: 1 sledge feeder on the right 3 press modules á 180 kN = 540 kN 4 normal carriage units 1 narrow carriage unit Workspace: Wire thickness range: up to 10 mm Belt width: up to 100 mm Feed length: up to 250 mm Power: up to 132 rpm
Automatic 3D wire bending machine was manufactured in Poland in 2022. The machine is used to automatically bend cut wire with a diameter of 4 to 8 mm. The structure made of thick-walled steel profiles, together with high-quality components, guarantee high bending precision and reliable operation. The automatic wire bending machine is equipped with a bending head with carriage and grippers and a wire feeding module consisting of a cut wire magazine and a choiceor mechanism. The workpiece taken from the magazine with a capacity of 150 kg, is fed via the wire choiceor mechanism into the feed channel, where it is pushed into the bending head and processed. At the end of the process, the bent wire falls into a receiving hopper or support table. All the capabilities of the wire bending machine are controlled by an installed PLC with an intuitive interface, taking care of the performance ...
Equipment: 1 sledge feeder on the right 1 two-point eccentric press 70 kN 4 normal carriage units 1 narrow carriage unit Workspace: Wire thickness range: up to 3.5 mm Bandwidth: up to 32 mm Feed length: up to 170 mm Power: up to 250 rpm
BIHLER GRM100 multislide punching and forming machine, Made in Germany. Machine re-engineered in year 2010 originally by Bihler, updated with servo motor, pump, rewired, new control, etc. Equipped with 4x forming slides and 18 ton press station. Gripper feed on right-hand side with straightener. Max width of strip 100 mm. Max wire diameter 10 mm. Standard feed length 250 mm max. Max operating speed 135 strokes per minute approx. Servo motor. Touch screen control. Air clutch. Weight cca. 6000 kg. Power supply 400/480V, 50 Hz. On stock more Bruderer, Schaal, and Mabu high speed presses. Also Ideal flash butt welding machines.
Equipment: 1 sledge feeder on the right 1 two-point eccentric press 250 kN 4 normal carriage units 1 narrow carriage unit Workspace: Wire thickness range: up to 5.0 mm Belt width: up to 40 mm Feed length: up to 320 mm Power: up to 132 rpm
number of stapling heads: 1 serial no.: 8074 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Wire electrode, welding wire, welding wire -Manufacturer: Metallit, shielding gas wire electrode -Type: 308LSI Ø 0.8 mm -Price: per piece -Quantity: 2 pieces -Dimensions: Ø 300/100 mm -Weight per roll: 15 kg/piece
MIG/MAG hose package for robot -Hose package with: wire feeder for robots or welding machines -Length: 2.5 m -Water cooled -Number: 2 wire feeders available -Price: per piece -Weight: 5.5 kg
wire electrode, welding wire, welding wire -Eurotrode: Carbo 2002 -Diameter: 1.00mm -Price: per roll -Number: 3 rolls available -Dimension: O 300/100 mm -Weight per roll: 15 kg
Travel distances: 320 x 250 x 220 mm [ X x Y x Z ] workpiece size X: 780 mm workpiece size Y: 570 mm workpiece size Z: 200 mm workpiece weight: 350 kg with automatic wire threading U/V axis: 80 mm x 80 mm Cutting in a water bath Conicity: +/- 15° at 120mm
Pallet with welding electrodes and welding wire approx. 1,000 kg total Net price 400,00 E
Wire electrode, welding wire, welding wire -Material: stainless steel -Welding wire: 307 -Diameter: 0.8 mm -Quantity: 1 roll 15 kg 1 roll approx. 5 kg -Price: complete -Dimensions: Ø 300/100 mm -Weight: approx. 21 kg
wire electrode, welding wire, welding wire -Welding wire: Alumig Mg 5 -DIN: 1732/SG-AlMg 5 -O: 1.20 mm -Dimension: O 300/100 mm -Weight roll: 6 kg
Wire stitching machine Hohner Economy 25/40; good condition; cleaned and tested; 1 stitching head; Yeast thickness max.25mm with folded clamp, 40mm with unfolded clamp; Saddle or block stitching. Wire stitcher Hohner Economy 25/40; good condition; cleaned and chekced; one head; max.stitching height 25mm on block or 40mm for saddle stitching; for block or saddle stitching.
Key data: 8 mm
Wire straightener Mint condition For wire diameters of 9 - 15 mm
Wire electrode, welding wire, welding wire -Manufacturer: Kaynak -Type: AS SG3 Ø 1.20 mm -Price: per piece Quantity: 2 pieces -Dimensions: Ø 300/100 mm -Weight of roller: 15 kg
wire electrode, welding wire, welding wire -Welding wire: Avesta 904L -EN: 12072 AWS A5.9/SFA 5.9 ER385 -O: 1.00 mm -Dimension: O 300/100 mm -Weight reel: 8.9 kg
Travel: 350 x 250 x 220 mm [ X x Y x Z ] max. workpiece size Z: 220 mm max. workpiece weight: 450 kg Table size X: 600 mm Table size Y: 400 mm with automatic wire threading U- / V-axis: 80 x 80 mm Cutting in a water bath Conicity angle 20° at height 80mm
Key data: 7 mm
Wire straightener Heavy-duty design for large wire diameters New, unused For wire diameters from 7 - 15 mm Total length 1500 mm Weight: Approx. 250 kg
wire electrode, welding wire, welding wire -Welding wire: Avesta 316L-Si/SKR-Si -O: 1.2 mm -Dimension: O 300/100 mm -Weight reel: 14.3 kg
Wire electrode, SG2 welding wire, welding wire -Type: CuA18 - Wire Thickness: 1.2mm -started role -Weight: 3kg
Double head wire stitching machine Hohner Accord 25/40; good condition; cleaned and tested; .max. Staple thickness 25mm with folded clamp and 40mm on both sides; 2 stitching heads; Length of staple back 14mm. Double head wire stitching machine Hohner Accord 25/40; good condition; cleaned and checked; max.thikness 25mm or 40mm by both sides; 2 heads; length of clamp 14mm.
MIG/MAG hose package for robots -Hose package with: wire feed for robots or automatic welding machines -Length: 3.4 m -Water cooled -Weight: 5.5 kg
wire electrode, welding wire, welding wire -Cored wire: Fluxofil: 36 -Diameter: 1.6mm -Dimensions: O 300/100 mm -Weight complete: 15.6 kg
Wire electrode, SG2 welding wire, welding wire -Type: CuA18 - Wire Thickness: 1.2mm -Number: 2 rolls available -Price: per roll -Weight: 16.1 kg
Key data: 250 mm, 400 mm, 210 mm
Inv. Num. : 2399 Type: 254Y/FF3 Producer: HITACHI Created: 2004 Parameters: Max. travel length of the X-axis: 250 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 210 mm Feed length in the U-axis ( -): -100 mm Feed length in the V-axis ( -): -100 mm Rapid traverse X/Y/Z: 1500 mm/min Max. workpiece dimensions: 600x400x210 mm Max. workpiece weight: 400 kg
Inert gas welding device, inert gas device, wire feed case -Wire feed case -with: hose package -Dimensions: 650/350 300 mm -Weight: 36 kg
wire electrode, welding wire, welding wire -Welding wire: Filarc PZ6125 -Diameter: 1.2mm -Dimensions: O 300 /100 mm -Weight roll: 16 kg
maximum number of results exceeded
please refine your search
