wire welding used for sale

diameter range 1,8-3,4 mm nail length 10-80 mm output - pieces/min 550

with assembly device for head plates wire diameter 2,2-3,8 mm nail length 13-110 mm capacity - pieces/min 350

diameter range 1,0-2,2 mm nail length 10-50 mm output - pieces/min 700

diameter range 2,0-4,0 mm nail length 50-100 mm output - pieces/min 800

dia. range 5 mm width of band 40 mm feeding length 500 mm stokes per minute 200 1/min

dia. range 1-4 mm width of band 20 mm output pieces/min 80-150 feeding length 240 mm

wire diameter range 0,5 -5,0 mm width of band max 70 mm feeding length max 320 mm output pieces/min max 132 number of slides 5

wire diameter range 10 mm width of band 100 mm feeding length 250 mm

dia. range 0,5-2,5 mm width of band 50 mm feeding length 170 mm number of slides 5 punching power 5 to output - pieces/min 225

3D - CNC wire diameter 5-12 mm feeding length unlimited

Conveyor Belt/Wire Webbing/Bar Webbing Belt with FU, Control Cabinet - Length 1,000 mm - Width 600 mm -------------------------- Conveyor belt / wire belt / mesh belt with FC, control cabinet - Length: 1,000 mm - Width: 600 mm

Conveyor belt/wire webbing/rod webbing - Length: approx. 3,700 mm - Width: 600 mm --------------------------------------------------------- Conveyor belt / wire belt / mesh belt - Length: approx. 3,700 mm - Width: 600 mm

Conveyor belt/wire webbing/rod webbing - Length: 3,250 mm - Width: 600 mm - Pitch: 12.7 mm - With geared motor --------------------------------------------------------- Conveyor belt / wire belt / mesh belt - Length: 3,250 mm - Width: 600 mm - Partition: 12.7 mm - With gear motor

Conveyor belt/wire webbing/rod mesh webbing belt with center drive - Length: approx. 2,500 mm - Working width: 300 mm - with mid-drive ------------------------------- Conveyor belt / wire belt / mesh belt with center drive - Length: approx. 2,500 mm - Working Width: 300 mm - With center drive

Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -swiveling -with gear motor: SEW type R53A -Power: 380 V 0.73 kW -Steel cable: Ø 5 mm, length: 13 m -Transfer in current condition as seen -Motor: tested and OK -Dimensions: 930/300/H510 mm -Weight: 60 kg

indoor crane, crane, electric wire rope hoist, hoist, motor cable winch, motor winch, tackle, pulling winch, pulley block -Handover: in the current condition as viewed -Condition: Operation is missing a switching element (can be installed for an additional charge) -Engines: tested and OK -Nominal load: 1125 kg -Lifting speed: 6.3 m/min -Lifting height: 6.3 m -Dimensions: 1100/1000/H700 mm -Weight: 368 kg

Wire reel, pasture wire reel, barbed wire winder, wire winder, wire winding machine, pasture fence winder, winding device -Drum diameter: 800 mm -Drum width: 990 mm -Drive: hydraulic -The device could be used with a corresponding front loader or three-point hitch -without front loader mount and hydraulic connections -Dimensions: 1020/1450/H830 mm -Weight: 318 kg

Wire feed rollers for MIG / MAG hose package, feed motor for inert gas welding device, inert gas device -with: Euro plug-in coupling -Number: 4x wire feed rollers available -Price: per piece -for a surcharge: gear motor, electric motor, direct current motor are also available -Dimensions: 285/90/H180 mm -Weight: 2.5 kg

Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder -Wire straightening machine: decoiler-straightener combination -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg

Wire feed drive for wire feeder case for MIG/MAG welding machine, MIG/MAG welding machine, wire feeder case, wire feeder, actuator, actuator, air damper actuator, geared motor -Manufacturer: ELVI, actuator -Actuator: Type 100605 -Voltage: 24 V -Number: 6x drive units available -Price: per piece -Dimensions: 220/200/H120 mm -Weight: 1.9 kg/pc.

Indoor crane, crane, electric wire rope hoist, hoist, motor cable winch, motor winch, tackle, pulling winch, pulley block -Manufacturer: Verlinde, control for electric wire rope hoist type VT202116 -Control voltage: 48 V -Frequency converter: Variator VT -Individual components: see photos -Delivery/Price: complete -Dimensions: 630/310/440 mm -Weight: 30 kg

CONTROLS   CNC controls WORKING RANGE -WIRE CUTTING-   X-axis travel: 500 mm   Y-axis travel: 350 mm   z-axis travel (vertical): 426 mm   conical operation for max.: 30 °   U-axis travel: 140 mm   V-axis travel: 140 mm WIRE SYSTEM   wire diameter (min): 0.15 mm   wire diameter (max): 0.33 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1940 mm   space requirements -front/back-: 2300 mm   total height: 2600 mm   total weight approx.: 4200 kg

This AGIE Agiecut VERTEX 3 Erosion machine was manufactured in the year 2006 in Switzerland and has 37021 erosion hours. It is equipped with an Agievision 5 Software version 07.08.01 control unit.

This 4-axis CHARMILLES ROBOFIL 4030 Si was manufactured in 1999. It features a maximum workpiece dimension of 1200 x 700 x 400 mm and can handle a weight of up to 1500 kg. The machine is equipped with a wire diameter range of 0.05 – 0.30 mm and a maximum cutting speed of 500 mm²/min. If you are looking to get high-quality wire EDM capabilities, consider the CHARMILLES ROBOFIL 4030 Si machine we have for sale. Contact us for further details.

This 5-axis ONA U 400 wire EDM machine was manufactured in 2000. It features a table travel of 600 x 400 mm and a Z-axis travel of 400 mm, accommodating a maximum workpiece size of 1200 x 880 x 400 mm with a weight capacity of 850 kg. If you are looking to get high-quality wire EDM capabilities, consider the ONA U 400 machine we have for sale. Contact us for further details.

This 5-axis Sodick AQ535L wire EDM machine was manufactured in 2007. It features an X-axis travel of 550 mm, Y-axis travel of 350 mm, and Z-axis travel of 300 mm. The work table size is 790 x 500 mm, with a maximum workpiece weight capacity of 800 kg. If you are looking to get high-quality wire EDM capabilities, consider the Sodick AQ535L machine we have for sale. Contact us for further details.

This 5-axis Sodick AQ537L wire EDM machine was manufactured in 2005. It features an X-axis travel of 570 mm, Y-axis travel of 370 mm, and Z-axis travel of 350 mm, along with a work table size of 806 x 496 mm. With a maximum workpiece weight of 1000 kg, this machine is designed for precision cutting. If you are looking to get high-quality wire EDM capabilities, consider the Sodick AQ537L machine we have for sale. Contact us for further details.

Locking machine RENZ ECL 360, with automatic feeder for wire comb-binding elements RENZ WP 300

Several Wafios wire processing machines with two payoffs are available. 1) Wafios N90, year of manufacture: 2003. Including payoff Wafios AHL 41 D-M, year of manufacture: 2002. 2) Wafios DS 80. 3) Wafios N6. 4) Wafios N5. 5) Wafios N4. 6) Wafios N4. 7) Wafios payoff AHL 41 DR, year of manufacture: 1998. 8) Wafios payoff AHL 41 D, year of manufacture: 1997. All machines including payoff. An on-site inspection is possible. Individual sale possible.

Wire cutter Type: AU-1000 iA Manufacturer: ACCUTEX Year: 2015 Max size of the work piece:1330 x 900 x 595 mm Max. weight of the work piece: 5000kg X/Y/Z/U/V 800 / 600 / 400 / 150 / 150 mm Diameter of the wire: 0.15-03 mm Continuously controlled 4 axes X, Y, U, V Drive system using AC servo drives Max. cut cone ± 22.5 °/ 100 mm Accuracy class of ball screws rpm C1 - the highest Filter system capacity l Main tank 1630 l, secondary tank (Z=600) 1280 l Max. cutting speed mm²/min 250 Dielectric conductivity measurement Auto – 5  200 k-cm Auto dielectric temperature measurement with an accuracy of ± 1°C Input kVA 15 Weight of the machine: 8500 kg Windows CE control system product for vertical alignment paper filter 2 pcs deionization resin - 1st filling container for deionization resin upper and lower nozzles – 2 pcs diamond guide 2 pcs tool for removin ...

This 5-axis Mitsubishi MV4800 was manufactured in 2018. It features an X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 510 mm, making it suitable for precision cutting of conductive materials. The machine includes a water-based dielectric system and automatic wire threading. If you are looking to get high-quality wire erosion cutting capabilities, consider the Mitsubishi MV4800 wire EDM machine we have for sale. Contact us for further details.

This 5-axis Makino U6 HEAT was manufactured in 2016. It features an impressive X-axis travel of 650 mm, Y-axis travel of 450 mm, and Z-axis travel of 420 mm. The machine has a maximum workpiece size of 1,000 x 800 x 400 mm and can handle a maximum workpiece weight of 1,500 kg. If you are looking to get high-quality wire EDM capabilities, consider the Makino U6 HEAT wire EDM machine we have for sale. Contact us for further details.

This 5-axis CHARMILLES TECHNOLOGIES Robofil 290P was manufactured in 1999. It features a travel range of 400 mm x 250 mm x 200 mm and can accommodate a maximum workpiece weight of 500 kg with dimensions of approximately 850 x 500 x 200 mm. If you are looking to get high-quality wire EDM capabilities, consider the CHARMILLES TECHNOLOGIES Robofil 290P machine we have for sale. Contact us for further details.

CNC wire cutter Type: CUT 200 mS Manufacturer: AgieCharmilles Year: 2013 Control: EDM Expert X: 350 mm Y: 220 mm Z: 220 mm U/V: 350 × 220 mm Max. bevel cutting: 45° Table size: 680 × 450 mm Max. workpiece weight: 750 kg Tub size: 1000 × 550 mm Processing type: Plunge cutting Automatic wire feeding: Yes Wire diameter: 0.10 – 0.30 mm Axis rapid traverse: 3 m/min Dielectric: 200 l Power supply: 380 V / 3 phases Dimensions: 2020 × 2200 × 2015 mm Weight: 2450–3500 kg Machine in good condition, fully functional, under power Find more here - / Contact us at -

A Mitsubishi CNC wire EDM machine including cooling unit is available. Workpiece dimensions X/Y/Z: 1050mm/800mm/295mm, max. workpiece weight: 800kg, table dimensions X/Y: 780mm/630mm, travel X/Y/Z: 500mm/350mm/300mm, max. table feed rate: 1300mm/min, wire diameter range: 0.2mm-0.3mm, max. wire feed rate: 250mm/s, wire tension range: 2N-25N, tank volume: 635l. Machine dimensions X/Y/Z: approx. 1850mm/2350mm/2050mm, weight: approx. 2550kg. Documentation available. An on-site inspection is possible.

Manufacturer: Mitsubishi Model: W30FV2-2 Type: Wire EDM machine (Wire erosion) Date of Manufacture: November 2006 Find more here - / Contact us at -

Manufacturer: Mitsubishi Model: FX20K Type: Wire EDM machine (Wire erosion) Year of Manufacture: 1999 Workpiece and Table Specifications - Maximum workpiece size (W x D x H): 1,050 x 800 x 295 mm - Maximum workpiece weight: 800 kg - Table dimensions: 780 x 630 mm - Axis travel (X / Y / Z): 500 x 350 x 300 mm - Maximum table feed rate: 1,300 mm/min Wire and Cutting Specifications - Wire diameter: 0.2 to 0.3 mm - Maximum wire feed rate: 250 mm/sec - Wire tension: 2 to 25 N Machine Dimensions and Weight - Overall machine dimensions (W x D x H): 1,810 x 2,310 x 2,050 mm - Machine weight: 2,550 kg Filter System - Tank capacity: 635 litres - Filter flow rate: 30 l/min - Filter fineness: 3 micrometres - Filtration: Paper filter (2 units) - Conductivity control: 0.5 to 100 x 10 ohm/cm - Filter unit dimensions (W x D x H): 800 x 1,700 x 1,720 mm - Filter unit weight (empty): 230 kg Ge ...

Manufacturer: Mitsubishi Model: W30FAS-2 Type: Wire EDM machine (Wire erosion) Year of Manufacture: 2006 Find more here - / Contact us at -

Wire EDM machine Sodick AQ 537L with few operating hours

Technical details Contents include: - 1 pallet with new reels of stitching wire (5 mm) - Quantity: 180 reels - 1 wooden box with various rolls of stitching wire Auction-ID: A7-46679-28

Capacity: 900 to 3.000 bottles/hour Wirehood: Four-wire closures Bottle height: approx. 235 - 360 mm Magazine capacity: 1.600 corks

working direction: left-right, single head. working direction: left-right electrical power supply kW: 420

This 5-axis Mitsubishi MV2400R wire-cut EDM machine was manufactured in 2017. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 310 mm, accommodating workpieces up to 1050 × 820 × 305 mm and weighing up to 1500 kg. If you are looking to get high-quality wire-cutting capabilities, consider the Mitsubishi MV2400R machine we have for sale. Contact us for further details.

A CNC wire EDM machine Charmilles is available. Travel X/Y/Z: 340mm/220mm/220mm, travel U/V: 350mm/220mm, max. taper angle: +/-30°, max. taper height: 220mm, max. workpiece dimensions X/Y/Z: 1100mm/550mm/220mm, max. workpiece weight: 750kg, table dimensions X/Y: 680mm/450mm. Machine dimensions X/Y/Z: 2050mm/2050mm/2000mm, weight: approx. 3250kg, working hours: 97916h. Documentation available. An on-site inspection is possible.

Type: Electric Wire Rope Hoist Brand: Morris Model: 400 Series Year: 2005 Execution: - Electric wire rope hoist with drum - Integrated electric motor (Morris) - Mounted on trolley frame with rollers - Steel wire rope with hook - Control box included Technical data: - Standard: BS2573 Part 2 Rating M - Serial No.: Q1Z / D68877 (as visible) Equipment: - Wire rope drum - Hook block - Trolley / carriage system - Electrical control box - Cable wiring (partly loose) Condition: Used Auction-ID: A7-45993-99

Type: Wire EDM Machine (Wire Erosion) Brand: Sodick Model: AQ537L Series: Premium Control: Sodick LQ33W Controller Application: High-precision wire cutting for tool & die manufacturing Equipment: - Fully enclosed machining area with sliding doors - Wire feed system with spool holders - Automatic wire threading unit - CNC control with monitor & keyboard - Manual control pendant - Dielectric tank with worktable - Integrated filtration system Technical Data: - Axes: X / Y / Z / U / V (CNC controlled) - Control: LQ33W Condition: Used Auction-ID: A7-45993-68

Type: Precision EDM / wire erosion tooling set Manufacturer: Unknown Model: G1 / G2 / G4 / G5 marked units Remarks: Assorted precision clamping and indexing tooling components for EDM or special machining applications, including rotary and clamping fixtures, used condition, sold as shown Construction: Hardened steel precision components Scope of delivery: Multiple tooling heads and fixture assemblies visible in pictures Auction-ID: A7-45993-121

Type: Electric wire rope winch Manufacturer: Sefson Model: SWL5-021 Country of manufacture: Sweden Operation: Electric Supply voltage: 24 V Wire diameter: 11 mm Max. wire length: 38 m Max. pulling force: Approx. 24 kN Max. lifting force: Approx. 12 kN Control: Wired remote control included Accessories: Steel wire rope included Mounting: Base plate included Condition: Used industrial condition with scratches, paint wear and surface rust Remarks: Transport trolley/table not included Auction-ID: A7-45993-101

5 industrial welders with wire feeder Auction-ID: A7-45993-177

Type: Wire EDM Machine (Wire Erosion) Brand: Sodick Model: AQ535L Controller: LN1W Linear Servo Controller Application: CNC wire cutting for high-precision tooling and mold manufacturing Equipment: - Fully enclosed machining cabinet - Sliding front door with safety window - Wire feed system with spool holder - Automatic wire threading unit - CNC control with screen & keyboard - Integrated floppy/USB interface - Manual control pendant - Dielectric tank with worktable - Filtration and dielectric circulation system Technical Data: - Axes: X / Y / Z / U / V (CNC controlled) - Control system: Sodick LN1W Condition: Used Auction-ID: A7-45993-69