140,760 used machines on RESALE, but how to find them? Machine Search
Equipped with exhaust motor, filter and wall brackets. Auction-ID: A1-47367-107
Offer 24014 Technical data: - Rated power at 50% ED 40 kVA - Max welding power 118 kVA - Adjustable projection 225 - 550 mm - Welding values - sheet steel 4 + 4 mm - Brass sheet 2 + 2 mm - Aluminium sheet 1 + 1 mm - Electrode force adjustable 65 - 390 daN - Required air pressure 6 - 10 bar - Cooling water volume 8 l/min - Control for: Retention time; Current time; - Holding + holding time, and - Pulse + pause time - Drive 380 V - Space requirement approx. W 600 x H 1350 x D 1550 mm - Weight approx. 330 kg - with: - complete electrical + pneumatic equipment - 6-time synchronous control MPS 1036 - Foot switch
One semi new EVG ATT mesh welding line Flexible welding line for the production of standard and special reinforcement panels, from small batches up to large production runs Automatic feeding of longitudinal and transverse wires from coils via synchronised multi-track RA-XE-type rotor straightening lines with single or double wire feeding, equipped with up to 10 rotors Automatic feeding of the cross-wires from rolls via a multiple-needle system specific to the equipment Producción «just in time» de distintos tipos y geometrías de paneles High production speed combined with short changeover times No need to flip panels, as the cross-wires are fed and welded either above or below the longitudinal wires
With wire feeder. Control board is missing. Auction-ID: A1-51529-65
With extraction system, manufacturer: Teka, type: Filtercube 4H, year of construction: 2009, serial number: 6493710011001. Total weight approx.: 3,700 kg. Auction-ID: A1-51529-72
Wire feeder type: Terrix Drive 4 ROB. Auction-ID: A1-51529-58
1 control MS1000. Auction-ID: A1-51529-142
With vise attached, manufacturer: Matador. Auction-ID: A1-51529-75
Power: 0.75 kW. Auction-ID: A1-51529-112
With cooler type: Cool 70 U40. Auction-ID: A1-51529-59
Control: C40F-A022, U285, built in 1999. Auction-ID: A1-51529-110
Manufacturer: Scheld. Type: DT300. Year of manufacture: 2009. Serial number: 090334. Auction-ID: A1-51529-70
With wire feeder. WITHOUT gas bottle. Auction-ID: A1-51529-124
New control system, HiE accent T-2000. Auction-ID: A1-51529-103
With nut feeder Winkhaus, serial number 48011, year of construction: 1999, weight: 150kg. Auction-ID: A1-51529-105
Cooler Type: Cool82 U44. Feed Case Type: M Drive 4 ROB 5HW XR Li. Auction-ID: A1-51529-117
Cooler Type: Cool82 U44. Feed Case Type: M Drive 4 ROB 2X. Auction-ID: A1-51529-116
Control: C40F-A022, S/N FS0100988, built in 2003. Auction-ID: A1-51529-111
Welding Table Type: Welding table Finish: Anti-corrosion paint or powder-coated finish Flatness: ≤ 0.2 mm/m Hole diameter: Ø 14 mm – 22 mm (depending on model) Standard spacing: Square grid (e.g. 100 mm x 100 mm) or rectangular pattern Maximum evenly distributed load: approx. 1,500 kg – 3,000 kg or higher Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-88
MILLER SYNCROWAVE 300 – AC/DC TIG Welding Machine Manufacturer: Miller Electric Model: Syncrowave 300 Machine Type: Industrial TIG / Stick Welding Power Source Condition: Used Technical Specifications Description Specification Brand Miller Model Syncrowave 300 Welding Processes TIG (GTAW) / Stick (SMAW) Welding Current Type AC / DC Maximum Welding Current 375 A indicated on control scale Current Adjustment Continuously Adjustable AC Balance Control Adjustable Pulse Welding Integrated Pulser Pulse Frequency Adjustable Background Current Adjustable Pulse On-Time Adjustable Post-Flow Gas Timer Adjustable, up to 60 seconds Crater Fill Control Integrated Arc Starting High-Frequency Start Amperage Control Panel / Remote Polarity Selection AC / DC / DC Reverse Current Display Analog Ammeter Voltage Display Analog Voltmeter Cooling Ventilated Power Source Main Features - AC/DC TIG welding - S ...
Manufacturer: PH-Maschinenbau. Type: PH-SO-II-G160. Year of manufacture: 1999. Power: 2.3 kW. Connection: 230V. Auction-ID: A1-51529-69
With cooler type: Cool71 U40 and wire feeder type: Expert Drive 4. Auction-ID: A1-51529-57
Unused in the original packaging; IGBT MAG / MI, MMA & lift TIG; adjustable current: 40-350 A; duty cycle: 60% duty cycle (250 A); equipped with LCD color display; Tig Torch with accessories; Electronic gas regulator; 3-phase; 50Hz; 4485; Auction-ID: A1-51257-451
Included: Extraction arm Auction-ID: A1-51523-53
Box size 475x325x350mm; Mig 50A/16.5V-200A/24V; MMA 20A/20.8V-200A/28V; TIG 20A/10.8V-200A/18V; 7672 Auction-ID: A1-51257-641
Maximum welding capacity: 107 kVA, cooling water volume: 4l/min Auction-ID: A1-51523-13
Box size 475x325x350mm; Mig 50A/16.5V-200A/24V; MMA 20A/20.8V-200A/28V; TIG 20A/10.8V-200A/18V; 7672 Auction-ID: A1-51257-620
Voltage 220V +-15% ; 10-130A current range; 25% duty cycle (25c) IP21S; breasts and welding hood; Inverter MMA welding machine; 25% 130A 25.2V ; 60% 84A 23.4V; 100% 65A 22.6V; fan cool; Auction-ID: A1-51257-619
Unused in the original packaging; IGBT MAG / MI, MMA & lift TIG; adjustable current: 40-350 A; duty cycle: 60% duty cycle (250 A); equipped with LCD color display; Tig Torch with accessories; Electronic gas regulator; 3-phase; 50Hz; 4485; Auction-ID: A1-51257-450
height adjustable legs; Blade height 785mm; drawer size inside 490x440mm; Auction-ID: A1-51257-378
Box size 475x325x350mm; Mig 50A/16.5V-200A/24V; MMA 20A/20.8V-200A/28V; TIG 20A/10.8V-200A/18V; 7672 Auction-ID: A1-51257-622
6x Cloos Qineo Tronic 450 MIG/MAG welding machines, 1x Cloos GLC 451-C welding machine and 1x Cloos GLC 553/MC3 welding machine are available, 1) 6x Cloos Qineo Tronic 450 MIG/MAG welding machines, welding current: 40-450A, welding current at 60% duty cycle: 450A/36.5V, welding current at 100% duty cycle: 350A/31.5V, open-circuit voltage: 77-98V, mains voltage: 380-480V/50Hz/3-phase, power cable: 4x6mm², mains fuse protection: 400V/32A, protection rating: IP23, insulation class: F, cooling method: F, dimensions (without wire feeder): 1011x517x703mm, weight (without wire feeder): 88kg, year of manufacture: 5x2017, 1x2016, 2) 1x Cloos GLC 451-C welding machine, year of manufacture: 2003, 3) 1x Cloos GLC 553/MC3 welding machine, year of manufacture: 2008, additionally, 21 welding torches with long torch necks, 12x500mm, 4x600mm, 5x1500mm, and 53 FKS400 Autogen Ritter welding torch hose ass ...
Flow volume: 1200 m3/h. Auction-ID: A1-42990-57
2 pcs. Rice Robot: - 1st remote laser welding system (Reis RLP16), built in 2006 - 2nd laser robot for integrated beam guidance (RV6L), built in 2003
MILLER SYNCROWAVE 300 – AC/DC TIG Welding Machine Manufacturer: Miller Electric Model: Syncrowave 300 Machine Type: Industrial TIG / Stick Welding Power Source Condition: Used Technical Specifications Description Specification Brand Miller Model Syncrowave 300 Welding Processes TIG (GTAW) / Stick (SMAW) Welding Current Type AC / DC Maximum Welding Current 375 A indicated on control scale Current Adjustment Continuously Adjustable AC Balance Control Adjustable Pulse Welding Integrated Pulser Pulse Frequency Adjustable Background Current Adjustable Pulse On-Time Adjustable Post-Flow Gas Timer Adjustable, up to 60 seconds Crater Fill Control Integrated Arc Starting High-Frequency Start Amperage Control Panel / Remote Polarity Selection AC / DC / DC Reverse Current Display Analog Ammeter Voltage Display Analog Voltmeter Cooling Ventilated Power Source Main Features - AC/DC TIG welding - S ...
Multi-Process Welding Machine Functions: AUTO, MIG, TIG & MMA Adjustable amperage: 30-350 amps duty cycle: 30% 350A • 60% 250 A • 100% 200 A Equipped with: LCD color display Includes: MIG/MAG torch Includes: Electronic gas regulator Connection: 380 volts Technology: IGBT Technology Protection: circuit breaker Languages: English, German, Dutch, French, Russian Including: manual Condition: unused, in the original packaging Auction-ID: A3-46115-1363
Welding Table Type: Welding table Finish: Anti-corrosion paint or powder-coated finish Flatness: ≤ 0.2 mm/m Hole diameter: Ø 14 mm – 22 mm (depending on model) Standard spacing: Square grid (e.g. 100 mm x 100 mm) or rectangular pattern Maximum evenly distributed load: approx. 1,500 kg – 3,000 kg or higher Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51509-88
Sold with LINCOLN ELECTRIC LF52D. Sold without the gas bottle. Auction-ID: A1-51896-1
\" Technical details Manufacturer: MEP S.p.A. Model: SYNTAX LINE 25 Type: Automatic reinforcement mesh processing system Serial number: 730061 Certification: CE marked Automation: PLC/CNC controlled Configuration: - Automated mesh assembly table - Reinforcement bar positioning system - Multiple wire and bar feeding heads - Feed rollers and transport mechanisms - Pneumatic and hydraulic positioning frames - Automated handling system - PLC-controlled electrical cabinets - Industrial HMI operator interface - Hydraulic power unit and valve manifolds - Safety guarding system - Mesh support and transfer stations Application: - Reinforcement mesh production - Welded mesh assembly - Construction reinforcement elements - Reinforcing mat production - Rebar processing operations - Automated steel reinforcement fabrication Function: - Automatic feeding of reinforcement bar ...
maximum number of results exceeded
please refine your search
10 € 
