141,112 used machines on RESALE, but how to find them? Machine Search
Additional technical specifications: • Hole diameter: approx. 30 mm • Distance from hole center to hole center: approx. 100 mm
Incl. welding fittings and welding material.
• Incl. hose package • for all further welding data see photographed type plate!
EWM MIRA 301 MIG KGE Welding machine Manufacturer EWM Model MIRA 301 MIG KGE Condition untested Location 35614 Aßlar DE Lot 53
Additional technical specifications: • max. negative pressure: 2400 Pa • max. volume flow: 1000 cbm/h
Additional technical specifications: • Number of holes: approx. 1800 • Hole diameter: 16 mm • Accessories: incl. various construction accessories such as clamps
Additional technical specifications: • Secondary short-circuit current: 22.4 kA • Open-circuit voltage: from 1.8 to 3.6 V
TEKA FILTOO Welding Fume Extraction Unit Manufacturer TEKA Model FILTOO Year 2017 Condition untested Location 73529 Schwäbisch Gmünd DE Lot 13
Consisting of various welding wires, including SG ALMg 3; for thicknesses, weights, manufacturers, and types, see pictures.
Additional technical specifications: • Hole diameter: 30 mm • Distance from hole center to hole center: 100 mm
Attention: for all welding technical data see photographed nameplate! Attention: without the gas cylinder seen in the photos
Seriennummer: 978002, Betriebsspannung: 230 V, Frequenz: 50 Hz, Nennstrom: 7 A, Anschluss: 1,1 kW
SOYER BMS-901 Stud welding machine Manufacturer SOYER Model BMS-901 Condition untested Location 35614 Aßlar DE Lot 11
KEMPER Welding fume extraction unit Manufacturer KEMPER Condition untested Location 35614 Aßlar DE Lot 61
Gas metal arc welding machine, arc welding machine, MIG/MAG welding machine, pulse welding machine, inverter welding machine, impulse welding machine -Manufacturer: Messer Griesheim, MIG/MAG gas-shielded welding machine -Type: Euromag 25-2 -Max. welding power: 250 A -Wire feed: 4-roll drive, separate, mobile -Accessories: Hose assembly, ground cable (see photos) -Dimensions: 970/490/H890 mm -Weight: 168 kg
chucking diameter: 315 mm table load: 300 Kg swivelling range: Grad turning speeds: 0,1 - 4,0 U/min connected load frequency: 220 V bore diameter: 63 mm weight: 0,09 t Dimensions (LxWxH): 0,8 x 0,6 x 1,2 m Welding turntable incl. - 315 mm chuck - 3-axis torch holder - Cutting torch - Machine base frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
IDEAL BAS 052 Ref. 38326 Band Saw Blade Welding Machine • 2012 • ID: 38326 IDEAL BAS052 is a band saw blade welding machine with 25 kVA power and operates at 400-440 V. It features UNIOP control. Flash butt welding of band saw blades from a UniOP control: that is the working arrangement on this BAS 052, year of manufacture 2012. The machine was repainted only, so it is presented as it came out of service rather than as a stripped and rebuilt unit. Clamping is hydraulic and annealing runs under pyrometer supervision with the temperature held automatically, which takes the heat treatment out of the operator's hands. Welding ranges Band saw blades for wood: 6-50 mm. Bi-metal bandsaw: 6-50 mm. Control and clamping UniOP process control. Annealing temperature held automatically. Annealing pyrometer. Clamping: pneumatic. Mass and footprint Around 500 kg, standing 14009001500 mm over wi ...
used
Large basket welding machine, Fabr. ZÜBLIN Machine data of the automatic welding machine: - Inner reinforcement diameter range: 1,465 - 4,100 mm - Diameter of the longitudinal wires: 6-10 mm - Number of longitudinal wires: 12 or 24 - Length of cylindrical reinforcement: any mm - Weight of the entire system: approx. 26.0 t - Foundation dimensions: approx. 14.0 x 11.5 m - Basket in basket production possible, i.e. for large-diameter pipes that have to be manufactured with a double basket from a static point of view - This system can also be used to produce baskets with bells
Travelling base and rails, welding head, controls and flux-handling components A6 Arc Master, LAF 1000, power slides and flux recovery . The column is eccentric, which means that the welding head is always lined up in the centre of the carriage. This to be able to weld round objects with turning rolls on the same rail. The CaB 300S can reach over high and long distances, both vertically and horizontally. The ±180° column rotation facility provides a total action radius. Extension (max mm) 5580
Gedreven Toerental : 60 - 1250 tpm Diameterbereik : 2700 - 6500 mm 4 in stock Max weight on both supports: 25 ton Adjustable in height: yes Number of wheels: 4 Motorpower: 20 kW / 16A Voltage: 3 x 400V Weight: 1290 kg
1. Left device: Cloos GLC 556 (MIG/MAG welding machine) Type / Model: Cloos GLC 556-C (robust industrial device series with separate wire feeder case) Process: MIG/MAG welding power source for professional industrial and workshop use Welding current: Strong power in the upper ampere range (designed for heavy welding work up to approx. 550 A) Mains connection: 3-phase three-phase current (400 V) Construction: Two-part system consisting of a compact power source (on trolley) and an external wire feeder connected by an intermediate hose package Special feature: Often equipped with integrated liquid cooling for the welding torch 2. Right device: Linde MIG 200 (MIG/MAG welding machine) Type / Model: Linde MIG 200 (compact workshop and assembly device) Process: MIG/MAG welding machine (mixed gas / CO2 or suitable for flexible use) Welding current ...
TRUMPF HL 54 P is a Impuls Schweissanlage, entwickelt für präzise, hochgenaue und zuverlässige Anwendungen. Arbeitskapazitäten nicht angegeben. Leistungsaufnahme 2.5 kW; Anschluss 50 Hz 3x 400 V; Gewicht ca. 220 kg; Abmessungen L600×B1020×H840 mm. Keine spezifischen Zubehörteile aufgeführt. Ermöglicht enge Toleranzen; typische Bereiche: Automotive, Luftfahrt, Uhren, Medizintechnik, Werkzeugmaschinen. Technische Daten ohne Gewähr
TRUMPF TrumaWeld L1000 laser welding system – built in 2004 For sale is a used TRUMPF TrumaWeld L1000 laser welding system for industrial laser processing. The system has a large work table of approx. 2,000 x 1,000 mm and enables flexible positioning of workpieces. It is particularly suitable for precise laser welding work on metallic components. Technical data: Manufacturer: TRUMPF Laser- und Systemtechnik GmbH Model: TrumaWeld L1000 Year of Make: 2004 Serial / Machine Number: A0460A0007 Mains connection: 400 V / 50 Hz Connected load: 11 kVA Control voltage: 24 V DC Required fuse: 3 x 16 A Compressed air connection: 7–10 bar Inert gas connection: argon, 10 bar Work table: approx. 2,000 x 1,000 mm Total dimensions: approx. 2,000 x 1,800 x 2,050 mm The machine is currently in storage and is not connected. An inspection under power or an up-to-date functional test is ...
Container rotating device, welding rotating device, welding rotating device, welding device, welding rotary table, welding rotary and tilting table, welding rotating device, welding rotary tilting table, welding fixture, circumferential seam welding machine -Manufacturer: Carl Cloos, Welding rotary device type CD 100 SR -Turning length: 1030 mm -Turntable: Ø 500 mm, tiltable -Peak height: 375 mm -Speed: electrically continuously variable 0-3.5 rpm -Control: via foot pedal -Burner stand: manually adjustable -Tailstock: with pneumatically operated quill, 90 mm stroke -Transport dimensions: 2025/800/H1350 mm -Weight: 400 kg
Stud welding machine, stud welding compact system, stud welding machine, stud welding, stud welding system -Manufacturer: Heinz Soyer, stud welding machine with stud welding gun -Type: BMS-8H -Connection voltage: 230 V / 50/60 Hz -Stud welding gun: PS-3K -Welding area: Bolts and pins from M3 M8 or Ø 2 8 mm -Quantity: 1x stud welding machine available -Dimensions: 350/350/H270 mm -Weight: 15.4 kg
CONTROLS conventional FEEDSTOCK STEEL STRIP sheet thickness max.: 3 mm PRODUCT (PROFILE, TUBE) external diameter max.: 139 mm ROLL FORMING LINE P110K I am providing the list of profiles and tubes that we used to manufacture on the TEGALNIK P110K line! Open cold-rolled steel profiles made from cold-rolled (CR) and hot-rolled (HR) strip: Steel angle profiles (Equal angles): • 15 x 15 x 1.5 mm • 20 x 20 x 1.5 mm • 20 x 20 x 2 mm • 25 x 25 x 3 mm • 30 x 30 x 3 mm Steel U channels: (Width x Height x Thickness) • 10 x 15 x 1.5 mm • 15 x 15 x 1.5 mm • 18 x 20 x 1.5 mm • 20 x 20 x 1.5 mm • 25 x 20 x 2 mm • 25 x 25 x 2 mm • 30 x 20 x 2 mm After modifying the machine, we also manufactured welded stainless steel tubes in the following dimensions using a special process: Round stainless steel tubes: • ø 16 x 1.5 mm • ø 18 x 1.5 mm • ø 20 x 1.5 mm • ø ...
table length: 1200 mm table width: 800 mm table height: 200 mm bore: 28 mm weight: 408 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 400 V / 50 Hz : < 75 dB(A) power capacity: 15 kW volume capacity: 20.000 m³/h weight: 1590 kg Modular plug & play airtower for hall extraction of welding fumes with integrated, soundproofed Fan, automatic, differential pressure controlled Filter cleaning, system control with color display, particle pre-separation and IFA - tested filter cartridges. The system is for a volume flow of average 20,000 m³ / h designed 1st filter stage - main filter: Filter area: 222 m² Number of filters: 6 pieces Dust class according to DIN EN 60335-2-69: M. Degree of separation:> 99.9% Cleaning: Jet - Pulse Compressed air connection: NW 7.2 mm, 4-6 bar, oil and water free 2nd filter stage - fine dust filter. Filter area: 65 m² Filter class according to ISO 16890: ISO ePM1 80% 3rd filter stage - Synthetic fiber mats: Filter area: 8 m² Filter class according to ISO 16890: ISO coarse 60% Total filter are ...
Advanced technological tooling with a dense and symmetrical structure of executive components. Designed for precise positioning and rigid locking of geometrically complex components (e.g. car body sheets) during automated welding or welding processes. The design is characterized by a high degree of repeatability of base points and is fully adapted to be mounted on a welding turntable. LIST OF COMPONENTS: 1. DESTACO pneumatic (knee) clamps – 30 pieces. Heavy actuators responsible for mechanical locking of the workpiece. 2. FESTO compact pneumatic actuators – 14 pieces. They are used to eject positioning pins or auxiliary locks. 3. Pressure position sensors (inductive/magnetic) – approx. 30 pieces. They monitor the opening and closing states of actuators. 4. Pneumatic installation in thermal shields (Pyrojacket type) – a complete bus system with flexible hos ...
GENERAL CHARACTERISTICS: Stand-alone technological tooling dedicated to a specific operation in an automated production line. It is characterized by a massive, open central frame and unified, heavy clamping units. The device works directly with industrial robots in the thermal hazard zone, having advanced installation protection and a dedicated mass current dissipation system. LIST OF COMPONENTS: 1. DESTACO main welding clamps with opening angle control – 20 pieces. Equipped with a mechanical angle scale (range 5-135°) facilitating collision-free loading. 2. Eye bolts (transport eyelets) – 4 pieces. 3. Copper ground blocks (welding ground) – approx. 2 terminal points. Thick copper connections to protect electronics and positioner bearings from welding current. 4. Electro-pneumatic box (I/O junction box) – 1 piece. A collection enclosure for signals fr ...
Handles the full spectrum of blade types — bi-metal, carbide, wood, and stainless steel — up to 50 mm clamping width, covering blade dimensions from 6×0.40 mm up to 54×1.60 mm on bi-metal stock. At 25 kVA with 38 kN clamping force and 10 kN upsetting force, it delivers consistent, high-integrity welds across carbon and stainless steel strip with max. cross-sections of 150 mm² and 60 mm² respectively. The fully automatic welding and annealing cycle is recipe-controlled via touch panel — operator inserts the blade, hits start, and the machine handles the rest. Robust pneumatic clamping, water-cooled electrodes, and a 800 kg industrial frame make this a workhorse for sawmills, blade service centers, and large metalworking operations. Make and Model iDEAL BAS 320 Nominal output (50% DC) 25 kVA Secondary voltage 2.8 – 5.5 V (6 stages) Control voltage 24 DC Clamping force 38 k ...
Replacement Welding Controllers for Resistance Welding Machines Also available: MPS 1033 MPS 1036 MPS 15033 MPS 15036 MPS 15043
Replacement Welding Controllers for Resistance Welding Machines MPS 100mono MPS 100monoR1 MPS 100multi MPS 100multiR1
Offer 26283 Technical data: - Water-cooled TIG – DC system can be moved, - Welding current infinitely adjustable with digital display - min. 5 A to max. 420 A - Mains connection 400 V - With: - SYNERGIC control system with programmable welding tasks - 2-stroke – 4-stroke setting - HF ignition and liftarc - Gas flow regulation, etc. - Hose package 8m light version - Ground cable - Pressure reducer - Space requirement approx. W 700 x H 1200 x D 1200 mm - Weight approx. 200 kg
Replacement Welding Controllers 19" for Resistance Welding Machines T-8036 T-8036 S3 5 times synchronous welding controls 1 or 2 programs (start contacts)
Replacement Welding Controllers 19" for Resistance Welding Machines MPS 8043/1 MPS 8043 ÍQ Portrait MPS 15043 MPS 15043 IQ
Used band saw blade welding machine for autogenous (butt) welding of band saw blades. Brand, exact model and detailed technical specifications not confirmed for this specific unit — please contact us for details. Auction-ID: A7-50988-8
Trumpf TruLaser Robot 5020Year of manuf. : 2010 ____________Description:TruDisk 3302 laser system:- TRUMPF TruDisk 3302 with a beam quality of 8 mm mrad:- Output power of 3.3 kW at the workpiece:- Laser system with 1 cavity:- Beam delivery system comprising an optical assembly for a single optical path, a fast switch (50 ms switching time) and a pilot laser including electrical control:- Integrated power supply and real-time capable control system for the evaluation and visualisation of operational data:- Fast laser power control:- TruControl 1000 control system:- Storage capacity for 199 laser programmes:- Safety monitoring in accordance with laser safety class 1, including a central safety lock:- Protection class IP54:- 10.4 panel computer with TFT touchscreenExtension of the beam path:Plus 1 additional laser light cable output, including interface card:consisting of::# Optical a ...
Filter area: 25 m² Maximum air flow rate with carbon filter: 2 x 900 m³/h Maximum air flow rate without carbon filter: 2 x 1,100 m³/h Maximum airflow with one arm: 1,500 m³/h Number of Extraction Arms: Up to 2 Fan power: 2.2 kW Power supply: 400 V three-phase Frequency: 50 Hz Number of filter stages: 3 1st stage: separator with spark arrestor 2nd stage: aluminium mesh pre-filter 3rd stage: fine fiberglass filter Fine Filter Filtration Class: F9 / 95% ASHRAE / BIA-C Final filter pressure drop: 800 Pa Maximum vacuum: 4,000 Pa Filter Fouling Indicator: 0 to 2,000 Pa Pressure Gauge Weight: approx. 89 kg Height: approx. 1,175 mm Width: approx. 506 mm Depth: approx. 750 mm Noise level: < 70 dB(A) Maximum permissible temperature: 70 °C Maximum relative humidity: 90% Auction-ID: A1-51172-143
Used Amtech Ultraweld 40 Ultrasonic welding machine with controller, user manual and cables. Exclusive table. Model: Ultraweld-40 (R4A actuator) Auction-ID: A1-50936-91
Inverter welding machine. Suitable for welding with coated electrodes. Suitable for use in high-risk environments. Auction-ID: A7-50799-171
maximum number of results exceeded
please refine your search
950 € 
