wire welding used for sale

table diameter: 560 mm table load: 0,3 t swivelling range: 0 - 90 Grad turning speeds: 0,25 - 4,0 U/min : 360 Nm welding current: 500 Ampere total power requirement: 0,4 / Hand kW • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Box size 475x325x350mm; Mig 50A/16.5V-200A/24V; MMA 20A/20.8V-200A/28V; TIG 20A/10.8V-200A/18V; 7672

equipped with double suitcase

Suitable for TIG / MMA, STAINLESS STEEL and Steel, 300A TIG DC welding; Control range 3-300A, approx 10 arc hours

Please note! Has software malfunction

Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated duty cycle: 40% Efficiency: 80% Insulation class: F Protection class: IP21 Weight: 9.4 kg Dimensions: 396X142X268 TIG: Rated input power: 4.8 kVA Rated input current: 27A Open circuit voltage 56V Output current 20-190A Output voltage 190A / 17.6V MMA: Rated input power: 6.6 kVA Rated input current: 37A Open circuit voltage 80V Output current 20-170A Output voltage 170A / 26.8V

table diameter: 1400 mm table load: 5 t swivelling range: 0 - 135 Grad turning speeds: 0,05- 0,5 U/min table height adjustment: von 1100 bis 1950 mm max. torque on the faceplate: 7000 Nm welding current: 700 Ampere including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 37 Positionen : 28 mm condition: neu weight: 29 kg Basic set 1 37 pieces, 28mm system, consisting of: Clamps: 4 x 280604 Bolt: 8 x 280511 Stop: 6 x 280420.N Angle: 2 x 280110.G Threaded bolt 8 x 280543 Stop 8 x 160415 Accessory set. 1 x 163999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stored in working condition with toshiba control. For plasmelassen and ordinary welding Copper must provide its own transport. Elevator available to charge it. 130 x 130 x 130 cm machine weight 1000kg

table length: 2400 mm table width: 1200 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,64 t dimensions: 2,4 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional Surcharge for 25mm material thickness: 340, -EUR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,19 t dimensions: 1,2 x 0,8 x 0,85 m Siegmund workstation including 2 drawers Premium Light, through hardened tool steel X8.7, plasma nitrided and BAR coated. Drilling Ø 28 mm, drilling surface 100x100 mm grid. Material thickness approx. 15 mm With the new workstation from Siegmund, you can create your ideal workplace in a modular system. The Siegmund Workstation can be individually adapted and expanded to meet your needs and wishes. Whether sawing, drilling or welding - the absolute all-rounder in every workshop! Consisting of: 1x 004002 (Siegmund Workstation) 1x 804004.X7 (perforated plate) 1x 284030 (clamp holder) 1x 004020 (shelf) 1x 284035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) Spacer ring 800653.N is required for clamping with  ...

number: 106 Positionen weight: 283 kg condition: neu : 28 mm Set 5: 125 pieces, 28mm system, consisting of: Ferrules: 14 x 280610.N Ferrules: 10 x 280630.N Prism: 6 x 280648.1.N Bolt: 36 x 160511 Magnetic bolt 8 x 280740 Stop: 12 x 280410.N Stop: 12 x 280420.N Stop: 4 x 280430.N Angle: 12 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Angle: 1 x 280164.N Angle: 1 x 280165.N Angle: 1 x 280166.N Angle: 1 x 280167.N Angle: 1 x 280144.N Angle: 1 x 280146.N Trolley: 1 x 280910 Accessory set. 1 x 283999 Price information plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 1200 x 1200 mm table load: 7000 Kg swivelling range: 105 Grad turning speeds: 0,07 x 0,6 U/min height adjustment: 1450 - 2450 mm hollow spindle diameter: mm welding current: 1000 Ampere max. torque on the faceplate: 14000 Nm total power requirement: 8,2 kW dimensions of the machine ca.: m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protection ...

Table dimensions: 1000 x 1000 mm table load: 2500 Kg swivelling range: 105 Grad turning speeds: 0,15 - 2,0 U/min height adjustment: 1010 - 1836 mm hollow spindle diameter: mm welding current: 700 Ampere max. torque on the faceplate: 5000 Nm total power requirement: 6,0 kW dimensions of the machine ca.: m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protection)  ...

clamping range of chuck: 80 - 280 mm height: 67,5 mm daylight: 100 mm external diameter: Futter 300 mm external diameter: Spannhebel 480 mm weight: 13 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1500 mm table load: 5 t swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min : 10000 Nm 0: 1,5 / 1,5 kW welding current: 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 32 Positionen weight: 35 kg Basic set 2 / 32 pieces for table top thickness 15 and 25 mm 6 pieces screw clamps 12 pieces quick clamping bolts 2 pieces universal stop 100 mm 4 pieces universal stop 150 mm 2 pieces universal stop 225 mm 2 pieces stop and clamping angle 175 mm 1 piece hole brush 300 mm 1 piece burner holder 1 piece non-stick spray 500 ml, natural, biologically based 1 piece welding table cleaner 500 ml, natural, biologically based The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 850 mm Vertikal stroke: 40 mm weight of the machine ca.: 0,18 t dimensions: 1,2 x 0,8 x 0,85 m Special offer ! Siegmund Workstation incl. 2 drawers + tool set B Through hardened tool steel, bore Ø 16 mm Holes surface 50x50 mm grid, material thickness approx. 11.5 - 13 mm. Consisting of: 1x 004002 (Siegmund Workstation) 1x 164004.X07 (perforated plate) 1x 164030 (clamp holder) 1x 004020 (shelf) 1x 164035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) 4x 160620 (clamp) 8x 160511 (double quick release bolts without groove) 6x 160412 (stop) 2x 160108.N (angle) 1x 160852 (Allen key) 1x 164301 (vice) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 900 mm table load: 1,0 t swivelling range: 135 Grad turning speeds: 0,12 - 1,2 U/min : 820 mm welding current: 500 Ampere total power requirement: 0,75 + 0,55 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1,5 x 1,0 x 0,9 m • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table load: 500 Kg table load capacity: 250 kg. vertikal table diameter: 550 mm swivelling range: 135 (-45 - +90) Grad turning speeds: 0 - 5 stufenlos U/min connected load frequency: 230 V total power requirement: 0,8 KW weight of the machine ca.: 0,255 t dimensions of the machine ca.: 0,82 x 0,73 x 0,71 m Welding turntable with - large passage 165mm - Footswitch - tilt by motor - Speed infinitely adjustable - 250 amp welding current transmission Demonstration machine documentation only in English. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 1200 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,32 t dimensions: 1,2 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 1200 x 1200 mm table load: 10000 Kg swivelling range: 105 Grad turning speeds: 0,07 x 0,6 U/min height adjustment: 1450 - 2450 mm hollow spindle diameter: mm welding current: 1000 Ampere max. torque on the faceplate: 20000 Nm total power requirement: 12,1 kW dimensions of the machine ca.: m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protecti ...

table diameter: 1400 mm table load: 3,0 t swivelling range: 0 - 135 Grad turning speeds: 0,05 - 0,5 U/min max. torque on the faceplate: 6000 Nm table pass: 200 mm welding current: 700 Ampere total power requirement: 1,1 + 2,2 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 300 mm table load: 50 Kg swivelling range: 90 Grad turning speeds: 1 - 12 stufenlos U/min table load capacity: 50 kg vertikal total power requirement: 0,22 kW weight of the machine ca.: 0,036 t dimensions of the machine ca.: 0,45 x 0,43 x 0,38 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2900 mm table width: 1200 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,77 t dimensions: 2,9 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 690 mm table load: 0,5/0,25 t swivelling range: 0 - 90 motorisch Grad turning speeds: 0,2 - 2,5 U/min spindle bore: 100 mm Torque: 375 Nm welding current: 500 Ampere connected load frequency: 230 Volt weight: 290 kg Dimensions (LxWxH): 800 x 750 x 750 mm Welding turntable with - Footswitch - tilt motor - Speed continuously adjustable - 500 amps welding current transmission The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1100 mm table load: 2000 Kg swivelling range: 0 - 135 Grad turning speeds: 0,1 - 1,0 U/min height adjustment: 1100 - 1550 mm max. torque on the faceplate: 4000 Nm engine output: 1,1 / 0,75 kW welding current: 500 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1300 mm table load: 3 t swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min : 6000 Nm 0: 1,1 / 1,1 kW welding current: 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1100 mm table load: 2 t swivelling range: 0 - 135 Grad turning speeds: 0,1 - 1,0 U/min : 4000 Nm 0: 1,1 / 0,75 kW welding current: 500 Ampere • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1800 mm table load: 8 t swivelling range: 0 - 130 Grad turning speeds: 0,02 - 0,2 U/min : 16000 Nm 0: 1,1 / 2,2 kW welding current: 1000 Ampere including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 450 mm table load: 300 Kg swivelling range: 90 Grad turning speeds: 0,2 - 2 stufenlos U/min table load capacity: 300 kg vertikal total power requirement: 220 kW weight of the machine ca.: 0,078 t dimensions of the machine ca.: 0,66 x 0,45 x 0,48 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 350 mm table load: 100 Kg swivelling range: 90 Grad turning speeds: 0,2 - 2 stufenlos U/min table load capacity: 50 kg. vertikal total power requirement: 220 kW weight of the machine ca.: 0,055 t dimensions of the machine ca.: 0,46 x 0,4 x 0,42 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1000 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,73 t dimensions: 2,0 x 1,0 x 0,9 m Welding table SIGMUND Professional 750 + Plasma-nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1000 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,74 t dimensions: 2,0 x 1,0 x 0,9 m Product description - High quality steel S355J2+N + plasma nitriding - Material thickness approx. 17 – 19 mm - Bore Ø 22 mm - Holes surface 100x100 mm grid - Rounded corners, edges and holes - Height of side panel 150 mm - Hole spacing in side cheeks 50 mm - Including scaling on the surface - Construction reinforced with ribs - Grid lines enable precise setups - Special equipment for welding tables is available on request. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,74 t dimensions: 2,4 x 1,2 x 0,9 m Welding table SIEGMUND Professional 750 + plasma nitrided is made of high quality steel S355J2+N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17 - 19.0 mm. The holes have a diameter of 22 mm. Hole arrangement in a 100 mm grid on the table top, Side panels 150mm with parallel hole arrangement in a 50mm grid. Incl. basic foot equipment. Table height 850mm Price plus packaging and transport. Other dimensions available. The accessories shown are not included in the scope of delivery. Optionally available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 106 Positionen weight: 283 kg condition: neu : 28 mm Set. 4: 110 pieces 28mm system, consisting of: Ferrules: 14 x 280610.N Ferrules: 10 x 280630.N Prism: 6 x 280648.1.N Bolt: 30 x 160511 Magnetic bolt 8 x 280740 Stop: 10 x 280410.N Stop: 10 x 280420.N Stop: 4 x 280430.N Angle: 8 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Angle: 1 x 280164.N Angle: 1 x 280165.N Angle: 1 x 280166.N Angle: 1 x 280167.N Trolley: 1 x 280910 Accessory set. 1 x 283999 Price information plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1200 mm table load: 3 t swivelling range: 0 - 135 Grad turning speeds: 0,07- 0,7 U/min table height adjustment: von 980 bis 1750 mm max. torque on the faceplate: 4500 Nm welding current: 700 Ampere including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 2000 mm table load: 10000 Kg swivelling range: 0 - 130 Grad turning speeds: 0,02 - 0,2 U/min height adjustment: 1450 - 2200 mm max. torque on the faceplate: 20000 Nm engine output: 1,5 / 2,0 kW welding current: 1000 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1400 mm table load: 4 t swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min : 8000 Nm 0: 1,1 / 1,5 kW welding current: 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 400 mm table width: 400 mm table load: 0,2 t table diameter: 400 mm swivelling range: 90 Grad turning speeds: 0,2 - 2 stufenlos U/min table load capacity: 100 kg. vertikal total power requirement: 220 kW weight of the machine ca.: 0,065 t dimensions of the machine ca.: 0,56 x 0,42 x 0,46 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 2000 mm table load: 10,0 t swivelling range: 0 - 135 Grad turning speeds: 0,05 - 0,5 U/min max. torque on the faceplate: 20000 Nm table pass: 200 mm welding current: 1000 Ampere total power requirement: 3,0 + 4,0 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1300 mm table load: 3000 Kg swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min height adjustment: 1200 - 1800 mm max. torque on the faceplate: 6000 Nm engine output: 1,1 / 1,1 kW welding current: 700 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1600 mm table load: 8 t swivelling range: 0 - 130 Grad turning speeds: 0,05- 0,5 U/min table height adjustment: von 1210 bis 2238 mm max. torque on the faceplate: 1200 Nm welding current: 700 Ampere including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping range of chuck: 10 - 200 mm height: 67,5 mm daylight: 65 mm external diameter: Futter 200 mm external diameter: Spannhebel 360 mm weight: 4 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 850 mm Vertikal stroke: 40 mm weight of the machine ca.: 0,26 t dimensions: 1,2 x 0,8 x 0,85 m Special offer ! Siegmund workstation incl. 2 drawers + tool set B high quality steel S355J2 + N, plasma nitrided and BAR-coated Boreholes Ø 22 mm, boreholes surface 100x100 mm grid Material thickness approx. 17 - 19 mm Consisting of: 1x 004002 (Siegmund Workstation) 1x 224004.P (perforated plate) 1x 224030 (clamp holder) 1x 004020 (shelf) 1x 224035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) 4x 220610.1 (clamp) 8x 220511 (double quick release bolts without groove) 6x 220410.N (stop) 2x 220110.N (angle) 1x 220852 (Allen key) 1x 004303 (vice) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 550 mm table load: 500 Kg swivelling range: 135 Grad tilt adjustment: manually/mechanicall: motorisch turning speeds: max. 5 U/min stufenlos table load capacity: 250 kg. vertikal total power requirement: 0,8 kW weight of the machine ca.: 245 Kg dimensions of the machine ca.: 820 x 730 x 710 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 1,1 t dimensions: 3,0 x 1,5 x 0,9 m Welding table SIEGMUND Professional 750 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17-19.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, Side walls 150mm with parallel hole arrangement in a 25 mm grid. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. Other dimensions available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 77 Positionen weight: 146 kg condition: neu : 28 mm Set 3: 77 pieces, 28mm system, consisting of: Ferrules: 10 x 280610.N Ferrules: 6 x 280630.N Prism: 4 x 280648.1.N Bolt: 24 x 160511 Magnetic bolts 4 x 280740 Stop: 8 x 280410.N Stop: 8 x 280420.N Angle: 6 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Angle: 1 x 280166.N Angle: 1 x 280167.N Accessory set. 1 x 283999 Price information plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 600 mm table load: 0,6 t swivelling range: 0 - 90 Grad turning speeds: 0,1 - 1,8 U/min max. torque on the faceplate: 450 Nm table pass: 80 mm welding current: 500 Ampere total power requirement: 0,18 + 0,18 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.