141,127 used machines on RESALE, but how to find them? Machine Search
Welding cylinder, pneumatic cylinder VBS M13010579 stroke: 130 mm rod diameter: Ø 35 mm New ! Dimensions: 425 x 115 x 48 mm
An MBK horizontal cage welding machine for the production of small square reinforcement cages is offered. Cage diameter: approx. 200mm-1500mm, max. cage length: 4000mm, wire diameter: 5mm-12mm, welding capacity: approx. 100kVA, control: Zoller+Fröhlich. Machine dimensions: approx. 6000mm/2500mm/2200mm, weight: approx. 8500kg. Inspection possible by arrangement.
used
Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Herrmann, Ultrasonic welding transducer, ultrasonic vibration unit -Welding transformer: Type KHS20-IP50-L -Horn/Ultrasonic Sonotrode: Type 4 004 635 212.433 see photos -Quantity: 1x ultrasound transducer available -Dimensions: 450/270/H145 mm -Weight: 20.1 kg
Welding Fume Extraction KEMPER 91710110 year: 1996 Operating hours: 12880 h Volume flow: 240 m3/h 1,1,1,000 1 kW 230 V Dimensions: 620 x 350 x 640 mm used, tested !
Welding cylinder, pneumatic cylinder VBS KN155591 stroke: 100 mm rod diameter: Ø 35 mm New ! Dimensions: 365 x 115 x 48 mm
used
Manufacturer: Rudholzer Type of Machine: Welding machine Year of Manufacture: 2018 Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3, Width 3, Height 4 (cm or m) - Weight 4000 kg - Voltage 400 Volts - Current 83 Amperes - Power 57.6 (Kw or KVA) - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines
Welding Fume Extraction LINCOLN NORWELD DF-500 Volume flow: 500 m3/h System pressure: 1000 mm/Wg ( mm water column ) - approx. 0.0.000 mm 098 bar Fan speed: 9200 rpm Operating voltage: 380 V 3AC Power consumption: 5.5 kW connection diameter ( inside / outside ): 2x Ø 27 / 32 mm, 1x Ø 70 / 75 mm motor: ATB 132S 5.5 kW 380 V 3AC 50 Hz IP54 used, tested ! Dimensions: 1800 x 1200 x 970 mm
Welding power source: Starmatic 1003 DC, max. welding current: 1000A at 100% duty cycle, lifting column height: 4850mm. Including flux tray, rail and vessel turning device. Documentation available. An on-site inspection is possible.
Working range: 1250x2250mm, max. feed speed: 48m/min, welding range: M3-M8, welding diameter: 3-8mm, stud length: 8-40mm, max. welding capacity: 30-40studs/min, max. feed: 48m/min, positioning accuracy: +/-0.2mm, length: 2400mm, width: 2700mm, height: 3100mm, the machine has been used very little and is in good condition. An on-site inspection is possible.
Max. load capacity: 30t/set, min. workpiece diameter at 90°: 466mm, max. workpiece diameter at 30°: 11457mm, roller dimensions: 520mm×355mm, roller covering: rubber, max. speed: 1295mm/min, motor power: 2×1.5kW, weight drive unit/idler unit: 1300kg/700kg. Documentation available. An on-site inspection is possible.
Mobiele filterunit voor lichte las- en afzuigtoepassingen Luchtstroom (m³/per uur): 1050 Diameter afzuigslang (mm): 160 Filteroppervlakte (m²): 30 Geluidsniveau: 73 dB
Mobiele filterunit voor lichte las- en afzuigtoepassingen Luchtstroom (m³/per uur): 1050 Diameter afzuigslang (mm): 160 Filteroppervlakte (m²): 30 Geluidsniveau: 73 dB
Welding cylinder, pneumatic cylinder VBS M13010577 stroke: 80 mm rod diameter: Ø 35 mm New ! Dimensions: 325 x 115 x 48 mm
A central welding fume extraction system is offered. Airflow: 30000m³/h, airflow: 30000m³/h, motor power: 30kW, compressed air connection: 6-8bar, max. static pressure: 2500Pa, duty cycle: 100%, control: PLC. The system is equipped with 2 spark traps and various ductwork components (extraction arms and hoods not included). An inspection is possible by arrangement.
Welding cylinder, pneumatic cylinder VBS M13010407 stroke: 35 mm rod diameter: Ø 35 mm New ! Dimensions: 180 x 115 x 48 mm
Welding cylinder, pneumatic cylinder VBS M13014322 stroke: 35 mm rod diameter: Ø 35 mm New ! Dimensions: 265 x 95 x 70 mm
Welding cylinder, pneumatic cylinder VBS M13014400 stroke: 60 mm rod diameter: Ø 35 mm New ! Dimensions: 315 x 68 x 55 mm
Welding cylinder, pneumatic cylinder SAVAIR SV446-97 9227-0017-0065 stroke: 65 mm rod diameter: Ø 35 mm New ! Dimensions: 315 x 68 x 55 mm
Welding rod OERLIKON OE-2,000 5 Ni DIN 8559 ASME Sec.II/C/SFA-5.28 ER80S-NI2 Diameter: Ø 2.4 mm Length: 1000 mm Quantity: 24 kg New ! Dimensions: 1030 x 80 x 60 mm
Inverter and holder for ultrasonic welding machine TELSONIC Ultrasonics SE-26/20-36kHz VK / max 500 W max. converter voltage: 1500 V with holder and pneumatic lowering stroke: 40 mm suitable for S840 and S842 used, tested ! Dimensions: 470 x 80 x 115 mm
Ref.Nr. 00938 Commercial offer Name of the system: Coordinate welding machine Manufacturer Ideal Factory Model CSR 101 Year of manufacture 2005 Rated power 125 kVA Connected load 125 kVA Open-circuit voltage 9 V Primary voltage 400 V Nominal frequency 50-60 Hz Fuse 200 A Repairs and overhauls These would be the most important repairs. CSR 101 Timing belt for lower table renewed in 2021 Water flow monitor renewed in 2023 Maintenance hoses for cooling renewed in 2022 Welding transformer 2024 replaced and contact surfaces revised on the secondary side Secondary rectifier 2024 sealed and revised 2024 Cooling system cleaned and re-hosed, operation with Addinol Protect extra Battery for control unit renewed in 2024 Proportional valve for electrode force 2025 overhauled Condition of the system under power, can be visited by app ...
Welding machine EWM MESSER TIG 350 DC 350 A 400 V Dimensions: 1000 x 520 x 900 mm
MIG / MAG Welding Machine JUPITER MIG 230 230 A 400 V used ! Dimensions: 350 x 1000 x 700 mm
Cooling Module for Welding Machines, Convection Cooling Module for Water-Cooled Welding Machines KJELLBERG KWE 501 400 V Dimensions: 530 x 335 x 395 mm
Welding converter, DC welding machine, welding transformer ELIN SWA 304 P 7.5 kW 25 - 300 A 220 - 500 V 3AC used ! Dimensions: 1000 x 600 x 840 mm
length: . mm height: . mm volt: U2 104 V ampere: I2 60 A volt: U1 400 V volt: U0 320 V ampere: I1 18-26 A Manufacturer number.32310819 EC/EN 60974-1 See type plate The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 500 machines in stockMore than 8,500 m² of storage space, crane capacity 70 tMore than 10,000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Welding robot great working condition Find more here - .ucymachines/ Contact us at - sales@ucymachines
Ultrasonic welding machine for the production of thermal solar absorbers Dimensions and Material Specifications: - Pipe Diameter Options: 8, 10, 12, or 15 mm - Material Thickness: - Copper Sheet: 0.12 to 0.5 mm - Aluminum Sheet: 0.3 to 0.5 mm - Sheet Width: Up to 200 mm - Programmable Welding Length: 1 mm to 9999 mm or continuous - Overall Height: 1250 mm - Overall Depth / Width: 1100 mm / 900 mm - Table Height: Adjustable to 900 mm - Total Weight: Approximately 150 kg Electrical and Pneumatic Requirements: - Supply Voltage: 230V | 50Hz - Power Consumption: Maximum 3500 VA - Compressed Air Supply: Minimum 300 liters/min at 8 bar, clean and dry Performance and Features: - Mechanical Repeatability: Less than 0.2 mm - CNC Module: B&R with CAN-BUS connection for frequency inverter - Memory: 128 MB CF card for programs - Interfaces: - 1 x RS 232 - 1 x USB - 1 x Ethernet - Control Panel: ...
This CLOOS QIROX QRC 350-E was manufactured in 2019. It features a maximum payload of 15 kg and a working range up to 4500 mm. Equipped with a QC 2 Master control system, it includes a handheld programming device with an 8.4 touchscreen. The robot supports expansion up to 12 axes and comes with integrated welding software and a digital interface. Consider the opportunity to buy this CLOOS QIROX QRC 350-E welding robot. Contact us for more information about this machine.
Medium Frequency Welding Inverter, Welding Inverter REXROTH / BOSCH PSI 6000 PSI 6100.350 L1 1070081665-219 GK100LS105 1070086966-102 100 A 400 V with control cabinet ! also without cabinet SG266 ! Dimensions: 800 x 450 x 450 mm
Complete module for supply of two welding workstations with Integrated welding fume extraction from Teka (welding fume separation class W3, with automatic filter cleaning) for steel. Movable product. Small appliances (Bosch, Makita or Milwaukee) can be attached to the holder (Fig. 4). Alternatively, extraction systems from Nedermann, Kemper, Denios, Valco, Vaupel, Plymovent and other brands. Fully assembled included 1 frame 2 Boom arms AGA 2020 1 tool cabinet 1 gas bottle holder 2 power dispensers 2 compressed air dispensers The welding workstation is suitable for TIG, MIG and MAG welding machines of the companies: Fronius, Clos, Rehm, Migomat, Esab, Lorsch, Ideal, Kemppi and many more! The welding table, which can be seen in pictures 5 &6, can be purchased separately! Currently, a trade fair return and a used welding workstation (SAP) are available. - We loo ...
Medium Frequency Welding Inverter, Welding Inverter REXROTH / BOSCH PSI 6000 PSI 6100.350 L1 1070081665-219 110 A 400...480 V also with cabinet SG265 ! Dimensions: 465 x 315 x 320 mm
Machine Type: MIG/MAG Inverter Welding Machine Make Merkle Type MobiMIG 180 K Serial No. 89.754 Connection voltage 1 x 230 Volt Adjustment range 25 – 180 amps Duty cycle 20% ED at 180 amps 60% ED at 110 amps Current adjustment infinitely variable Cooling inverter through built-in fan Cooling burner gas-cooled Portable assembly system design Wire Feeder 2-Roller Gearbox Fuse 16 Ampere Dimensions L x W x H 450 x 210 x 480 mm Special Accessories ColdMIG Welding Process E-welding, MIG soldering, cored wire welding Weight 17 kg Age 12 years Condition workshop tested, very good incl. UVV workshop test report Scope of supply welding system with the following accessories: 1 piece of welding torch SBT 157 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick sp ...
Welding Machine VEM, SCHRÖDER Welding Rectifier: RGSa 315.1 Wire Feeder: DVG 400 electronic Year: 1977 / 2001 50 - 315 A 220 / 380 V used, tested ! Dimensions: 800 x 600 x 1400 mm
Machine Type: Electrode Inverter Welding Rectifier Make EP-Systems Type Cycle 60.16 Connection voltage 230/400 V Adjustment range 1 – 160 amps Duty cycle 60% ED at 160 amps 100% ED at 130 amps Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter through built-in fan Portable assembly system design Fuse 26 Ampere Dimensions L x W x H 420 x 190 x 300 mm Weight 8 kg Age 10 years Condition workshop-tested new incl. UVV test report Scope of supply welding system with the following accessories: 1 piece ground cable 16 sqmm, 4 mr. long 1 piece electrode cable 16 sqmm, 4 mtr. long 1 piece of hand shield 1 piece facing glass 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2 rows 1 piece mains plug 230 V, soli ...
Type: SAR400 - self-aligning 1 driven unit 3 non-driven units diameter of wheel: 370 mm
Welding machine, welding rectifier, jump starter, battery starter, charger VISZEK TIRISZTAR 24 SV built: 1988 charging current: max. 63 A < < br />jump start: max. 400 Abr /> welding current: max 130 A 9 kW 380 V 3AC used, checked! without batteries ! Dimensions: 820 x 520 x 940 mm
Includes welding cable. Auction-ID: A1-41281-256
welding manipulator, welding turntable, welding table HEINRICHSGLÜCK H50 payload: 5000 kg clamping plate: 1200 x 1200 mm 360° rotatable ca 110° tiltable 380 V used, tested ! Dimensions: 1500 x 2800 x 1700 mm
8008 CM Art. item / Anno/Year: 06-01/90, Hz 50, 380 V, 100 KVA 50%, 250 KVA, 8200 Amp 100%, 36000 Amp short circuit, 710 da N pressure, 300 l/h H2O Water Cooling - Made in Italy The spot welding machine was used weekly about 10 years ago and was fully operational at that time. The machine can be connected at any time and can be checked by qualified personnel by the potential buyer with the product to be manufactured in the future. The machine can be picked up at the current location – as it stands – without warranty and other services for 2800.00€ VHB or shipped plus shipping costs. Alternatively, we can have the machine checked by external specialists, in which case the price is approx. 4500,00€.
Hot gas welding machine, multi-stage SCHLOMA ZIS-487/2 200 / 400 / 600 W 220 V AC approx. 2.8 m connection cable suitable air supply - see LU235 ! New !' Dimensions: 470 x 200 x 50 mm
table length: 1200 mm table width: 700 mm table height: 900 mm table load capacity: 250 Kg weight of the machine ca.: 36 Kg dimensions: 1,2 x 0,8 x 0,85 m Siegmund workbench incl. accessories - consisting of screw clamps, manual clamping bolts, surface clamping bolts and angle bracket - Frame made of aluminum profiles - Working height 900 mm - Surface made of aluminum table profiles - Drill hole Ø 16 mm - Hole spacing 50 mm - Hexagon groove HX8 - Hexagon groove distance 50 mm - When clamping aluminum parts, the bolts may only be tightened hand-tight. - For clamping: Manual clamping bolt 160514 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Includes welding cables and welding torch. Auction-ID: A1-41281-298
Fully automated welding system for steel profiles Steel frame construction EWM type Phoenix Plus Electromotive NC drive integrated as robot axis Combination with welding process possible Flexible set-up via interchangeable inserts for IPE profiles from 80 - 160mm various head end variants possible Programming according to customer order Number of combinations according to customer requirements, e.g. : 5 welding programmes and 3 handling programmes ABB type TSC 2013 integrated in MAG package ABB type 7600 Feeding of the profiles: Accumulating roller chain conveyor with stopper and separating function Accumulating roller chain conveyor with stopper and separating function Roller conveyor - gravity principle Find more here - .ucymachines/ Contact us at - sales@ucymachines
maximum number of results exceeded
please refine your search
100 € 
