wire welding used for sale

Fanuc Tape Cut Model WO CNC Wire EDM Machine Manufacturer: Fanuc Ltd. Model: Tape Cut Model WO Type: A04B-0248-B042 Equipment type: CNC Wire EDM Machine Year: 1991 Serial number: P918W0443 Country of manufacture: Japan CNC wire electrical discharge machining (Wire EDM) machine designed for precision cutting of electrically conductive materials using a continuously fed wire electrode. Technical specifications: X-axis travel: 200 mm Y-axis travel: 350 mm Z-axis travel: 160 mm Connected load: 9 kVA Electrical supply: 200–550 V, 50/60 Hz Equipment / features: Fanuc CNC control Automatic wire-feed system Wire tension/feed equipment Dielectric / flushing system Enclosed machining tank and work area Operator control panel Approx. dimensions (L × W × H): 1,800 × 1,600 × 2,000 mm Approx. weight: 1,800 kg Condition: Used. Main machine, CNC control, ...

Industrial diamond wire sawing machine manufactured by Pellegrini Meccanica S.p.A., Italy, designed for quarry and natural-stone cutting applications. The TDI 65 Super is a medium-power wire saw with variable wire speed and controlled machine travel, suitable for granite, marble and other dimensional stone cutting. Independent references also identify the TDI 65 Super specifically as a quarry diamond-wire cutting machine. Approx. 2,400 × 1,500 × 1,700 mm (L × W × H), excluding loose rails and accessories. Weight: 1,700 kg. The rails and loose accessories should ideally be measured and listed separately for collection planning. A reference describing this model's quarry equipment configuration specifically mentions 3 m additional rails, Ø385 mm pulley pairs and horizontal-cutting equipment as accessories for a TDI 65 Super Auction-ID: A1-51282-2

Type: A04B-0312-B001#E5. Power: 13 KVA. Auction-ID: A1-51529-18

Type: A04B-0309-B001/E5. Power: 13 KVA. Auction-ID: A1-51529-19

wire EDM machine, year 2006, CNC W30FAS-2. Used machine. More info & price on IndustrialBuyer.

table length: - mm table width: - mm ampere: A total power requirement: kW weight of the machine ca.: 5200 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Including 3 shelves. Dimensions per section: 100x64x200 cm. This lot must be collected by the buyer himself. Auction-ID: A1-51062-395

AGIE AGIECUT Progress 2 CNC Wire EDM Machine | Year of manufacture 2004 For sale is an AGIE AGIECUT Progress 2 CNC wire EDM machine in industrial design. The machine comes from a production plant and has been professionally dismantled. The AGIECUT Progress series is one of AGIE's proven wire EDM machines and is suitable for tool and mould making, precision manufacturing and general mechanical engineering. Technical data Manufacturer: AGIE Model: AGIECUT Progress 2 Year of Make: 2004 Control: MC Progress Operating voltage: 3 × 400 V Frequency: 50 Hz Connected load: 12.1 kVA Rated current: 17.5 A Machine weight: approx. 2,650 kg Facilities CNC control MC Progress Automatic wire threading AGIE Wire Feeder System Original AGIE Generator Complete dielectric system Original control panel Precision Work Table Complete protective enclosure Condition The machine comes from an industrial co ...

AGIE AGIECUT 150 HSS Wire EDM Machine – Year 1995 For sale is an AGIE AGIECUT 150 HSS CNC wire EDM machine. The machine comes from an industrial company and was taken out of service due to a change in operations. AGIE is one of the most renowned manufacturers of wire EDM machines and stands for the highest precision and reliability. Technical data Manufacturer: AGIE Model: AGIECUT 150 HSS Year of Make: 1995 Control: AGIEMATIC CF 50 SE Generator: AGIEPULS HSS Voltage: 3 × 400 V Frequency: 50 / 60 Hz Operating hours: approx. 69,713 h Travels X: 300 mm Y: 200 mm Z: 250 mm Workpiece Max. workpiece weight: approx. 550 kg Facilities CNC control AGIEMATIC CF 50 SE AGIEPULS HSS Generator Automatic Wire Threading (HSS) Dielectric tank Complete machine bed Control panel Control cabinet Cooling and filtration system Condition The machine is sold as used. It comes from a production hall ...

AGIE AGIECUT Progress 2 CNC Wire EDM Machine | Year of manufacture 2003 For sale is an AGIE AGIECUT Progress 2 CNC wire EDM machine in industrial design. The machine comes from a production plant and was professionally dismantled. AGIE is one of the world's leading manufacturers of wire EDM machines and stands for the highest precision, reliability and process reliability. The AGIECUT Progress series is ideal for tool and mould making, precision parts, stamping tools and general mechanical engineering. Technical data Manufacturer: AGIE Model: AGIECUT Progress 2 Year of Make: 2003 Control: MC Progress Operating voltage: 3 × 400 V Frequency: 50 Hz Connected load: 12.1 kVA Rated current: 17.5 A Machine weight: approx. 2,650 kg Facilities CNC control MC Progress Automatic wire threading Original AGIE Generator Complete dielectric system Automatic wire feeder Wire Coil System Complete ...

Wireless bilirubinometer, never used Condition: new, never used Non-invasive device to monitor jaundice, precision bilirubinometer that determines, transcutaneously, the level of bilirubin, in newborns before, during and after phototherapy One of the specificities of this device is that it is battery-powered, which makes it the bilirubinometer of choice for home visits, ideal device for private midwives, for early discharges after childbirth in order to detect hyperbilirubinemia! Device without problems of battery wear and too long charging time due to the fact that the biliflash works on battery. Bilirubinometer which has an excellent correlation between the blood sample and the measurement of the device. This medical device is a regulated health product that bears the CE mark under this regulation. Auction-ID: A1-51618-498

Wireless bilirubinometer, never used Condition: new, never used Non-invasive device to monitor jaundice, precision bilirubinometer that determines, transcutaneously, the level of bilirubin, in newborns before, during and after phototherapy One of the specificities of this device is that it is battery-powered, which makes it the bilirubinometer of choice for home visits, ideal device for private midwives, for early discharges after childbirth in order to detect hyperbilirubinemia! Device without problems of battery wear and too long charging time due to the fact that the biliflash works on battery. Bilirubinometer which has an excellent correlation between the blood sample and the measurement of the device. This medical device is a regulated health product that bears the CE mark under this regulation. Auction-ID: A1-51618-497

Used ROBINO & GALANDRINO RECORD 10000 wirehooder machineTechnical Specifications & Performance DataThe Robino & Galandrino RECORD 10000 is a wirehooder designed for the application of wire cages on bottles used in sparkling wine and champagne-style beverage production. Built in 2017, this industrial packaging machine supports the final closure stage after cork insertion, securing the cork with a correctly applied wire cage.Manufacturer: Robino & GalandrinoModel: RECORD 10000Machine type: WirehooderYear of manufacture: 2017Electrical supply: 400 V, 3-phaseFrequency: 50 HzCurrent marking: 6 AElectrical diagram: REC377Advanced Automation & Control SystemsThis wirehooding machine is configured for industrial bottle handling and cage application. Its three-phase 400 V electrical supply is suited to integration within an automated bottling and industrial packaging environment. The machine can  ...

Very complete cutting and tapping set consisting of several tap and cut irons in sizes of M6 up to and including M24. With wrenches, screwdriver, complete in suitcase. Metric. Auction-ID: A1-40901-413

Very complete cutting and tapping set consisting of several tap and cut irons in sizes of M6 up to and including M24. With wrenches, screwdriver, complete in suitcase. Metric. Auction-ID: A1-40901-114

HONEYWELL ECLIPSE MS5145 Wired Laser Barcode Reader; ; METROLOGIC / Honeywell ECLIPSE MS5145 Hand Shower; Scanner Type: HD Monoframe; Sensor Type: Laser; CodeGate technology, allowing for quick data targeting at the touch of a trigger button; Great depth of field; Wide scan reading; Reading speed 72 scan lines/sec; Automatic identification of all standard barcodes; Easily interchangeable link cables; Compatibility of OPOS and JPOS systems; Easily programmable by Windows and by specific barcode menus; Interface: USB; Weight without cable: 97 gr; ; Internal reference: FA-2186 Auction-ID: A1-50994-1185

Very complete cutting and tapping set consisting of several tap and cut irons in sizes of M6 up to and including M24. With wrenches, screwdriver, complete in suitcase. Metric. Auction-ID: A1-40901-414

Baseus N1 Plus outdoor surveillance camera 2K 2-Cam Kit S0TY002131 IP Surveillance Set WiFi Set of 2 pieces 2304 x 1296 Pixel The Baseus Security N1 Plus 2K camera set provides simple and effective security for your home. The high-resolution 2K cameras (2304x1296 pixels) deliver clear and detailed photos and videos. Thanks to the large 145° ultra-wide-angle lens, you can capture a wide surveillance range while avoiding blind spots. The 8x digital zoom allows you to view certain areas with particular precision and thus keep an eye on all the details. The cameras' colour and infrared night vision function enables clear and detailed images even in complete darkness. A powerful 100 lumen LED floodlight is automatically activated when a movement is detected and enables optimal visibility at night. The powerful 9600 mAh battery provides up to 270 days of battery life on a single charge. (Thi ...

Baseus N1 Plus outdoor surveillance camera 2K 2-Cam Kit S0TY002131 IP Surveillance Set WiFi Set of 2 pieces 2304 x 1296 Pixel The Baseus Security N1 Plus 2K camera set provides simple and effective security for your home. The high-resolution 2K cameras (2304x1296 pixels) deliver clear and detailed photos and videos. Thanks to the large 145° ultra-wide-angle lens, you can capture a wide surveillance range while avoiding blind spots. The 8x digital zoom allows you to view certain areas with particular precision and thus keep an eye on all the details. The cameras' colour and infrared night vision function enables clear and detailed images even in complete darkness. A powerful 100 lumen LED floodlight is automatically activated when a movement is detected and enables optimal visibility at night. The powerful 9600 mAh battery provides up to 270 days of battery life on a single charge. (Thi ...

table length:920 mm table width:600 mm ampere:13,2 A weight of the machine ca.:6 t dimensions of the machine ca.:2,46 x 2,24 x 2,33 m X-axis:600 mm y-axis:400 mm Z-axis:260 mm max. table load:1500 kg The dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg.

TIG Welding Machine, Electric Welding Machine KESTRA Type TIG 350 AC/DCE Welding MachineFabr. No. 09720693 Year of construction approx. 1985Power 350 Amp. = 60 % EDExsetting range 3 steps and fine adjustmentCurrent type AC / DCNet connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with TIG torch- 2 stroke / 4 stroke welding device- Water-cooled- Gas pressure reducing valveSpace requirement L x W x H 1050 x 560 x 900 mmWeight 250 kgThe welding test gives good results when welding stainless steel with

TIG welding machine, electric welding machine DALEX type TGKW 55 (AC-DC)Series No. 532521 year of construction approx. 1975Power 225 Amp. = 60 % ED 125 Amp. = 100 % EDEsetting range 2.8 to 225 ampereCurrent type direct current and alternating current (AC-DC)Mains connection 380 volts, 50 Hz- Power setting via 5 coarse steps and fine adjustment via rotary potentiometer infinitely variable- 2-stroke and 4-stroke welding device- Remote controller with rotary potentiometer for fine adjustment- Digital display for ampere- TIG hose package 4 meters- Welding gas pressure reducing valve-

We sell 4 pieces of used welding units, welding rectifiers, brand Lincoln DC400, year: 1993, functional, in need of easy repair, only for export For purchase of 4 pieces Price per piece 500,00 E net Single price 600,00 E net

continuous welding machine, film welding machine -Manufacturer: Rische, continuous welding machine film welding machine Polystar -Type: Polystar 350/5 DSM-TE -Voltage: 220 V -Technical data: see photo type plate -Dimensions: 520/250/H5600 mm -Weight: 12.1 kg

Unused Auction-ID: A1-40407-79

Auction-ID: A1-50707-48

TIG welding machine, TIG welding machine NIMAK type GS 200 WWIG and electric DC welding machine, E-welding machine also for rod electrodesFabr. No. 26642 Year of construction approx. 1983Power 200 Amp. = 60% ED 150 Amp. = 100% EDEinfinitely variable power adjustment rangeMains connection 380 Volt, 50 Hz, 32 Amp. Plug- 5 meter TIG hose packet- HF ignition- stepless current control and current rise- connection for electrode welding- direct current only- water-cooled- inert gas pressure reducerSpace requirement L x W x H 900 x 590 x 1000

Tig Welding Machine L-TEC Type Inverter TIG 200 DCWIG Welding Machine for DC DCFabr. No. 184548 year of construction approx. 1994Power 200 Amp. = 60 % ED 155 Amp. = 100 % EDEinfinitely variable setting rangeCurrent type DC (direct current)Mains connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with central connection and hand torch- with remote potentiometer (foot switch)- gas pressure relief valve- direct current only = DC- HF ignitionSpace requirement L x W x H 850 x 480 x 740 mmWeight approx. 150 kgThe welding test results in very

E-welding machine, rod electrode welding machine ESAB type LTG 250Masch. No. 736-820-387 Year of construction 1997Power 250 Amp. = 35 % ED 190 Amp. = 60 % ED 150 Amp. = 100 % EDpower setting: infinitely variable - electrode holder with 6 meter connection cable - direct current - fan - air cooling - possibly also TIG welding possible, without hose packageMains connection 380 Volt, 50 Hz, 32 Amp. ConnectorSpace required L x W x H 1200 x 750 x 1050 mmWeight 180 kgGood conditionDevice was originally also suitable for TIG welding

Welding turntable - Welding rotary device with housingRound welding deviceLoad capacity approx. 50 kgTurning chuck diameter 300 mmTurning chuck speed 1.0-15 rpm. Mains connection 230 volts, 50 Hz- Spiral lathe chuck with inwardly stepped chuck jaws- Speed control infinitely variable via potentiometer- Drive via gear motor, direction of rotation left- Start via electric switch- Welding current transmission with sliding contact- Extraction connection 160 mm- Interior lightingDoor opening W x H 715 x 1060 mmInterior dimensions W x D x H

Spot Projection Welding Machine NIMAK Type PMP 5 / 35Spot Welding Machine, Projection Welding MachineFabr. No. 88100 Year of construction approx. 1988Power at 50% ED 35 kVAArcharge 250 - 450 mmWorking stroke 40 mmElectrode force 100 - 460 kp infinitely adjustableElectrode force at 6 bar 460 daNBobedience air pressure 2 to 6 barElectrode arm 60 mmElectrode holder 30 mmInsert electrodes cone MK 2 17.78 mmArm spacing 200 / 400 mmAdjustability of the electrode holder 200 mmConnected load 83

MIG MAG Welding Machine, Shielded Gas Welding Machine CLOOS Type GLC 357 NMIG MAG Welding Power SourceFabr. No. 576 Year of construction approx. 1985Nominal power 350 Amp.Power 350 Amp. - 80% ED 310Amp. - 100% EDEinfinitely variable adjustment rangeConnecting hose package 4.5 metersMains connection 380 Volt, 50 Hz, 32 Amp. Plug - 2-stroke and 4-stroke welding device - external wire feeder type CK 72 ZK with 2 roller drive and 4.5 meter hose package- 3 meter hose package with central connection and CLOOS hand torch- water-cooled-

MIG MAG welding machine, arc welding machine EWM type MIG 230Fabr. No.: L/0340 Year of construction 1994Power 230 Amp. = 35 % ED 120 Amp. = 100 % EDEsetting range 8 stepsMains connection 400 volts, 50 Hz, 16 Amp. Plug- 2-stroke and 4-stroke welding device- Spot welding device- 2-roll wire feeder- 3 meter hose package with central connection- Welding gas pressure reducerSpace requirement L x W x H 1000 x 450 x 700 mmWeight 70 kgGood condition; used

Spot Projection Welding Machine NIMAK Type BMP 20/150Spot Welding Machine, Projection Welding MachineMasch. No. 81692 Year of construction approx. 1980Power at 50% ED 150 kVAAf clamping plate lower 200 x 160 mmClamping plate upper 200 x 160 mmPower setting infinitely variableThroat max. 150 mmElectrode force 200 - 2000 kp infinitely adjustableOperating air pressure max. 6 barConnected load 600 kVANnet connection 380 volts, 50 Hz- welding control DTW 4Z 2P- single points and series points- bounce

Tig welding machine DALEX type GL/W 201TIG welding machineMachine no.: 201 0447 Year of construction approx. 1995Power 200 Amp. 35% ED 160 Amp. 60% ED 120 Amp. 100% EDEinfinitely variable adjustment rangeType DC - DCmains connection 400 Volt, 50 Hz, 5.9 kVA, 32 Amp. Plug- 2-stroke and 4-stroke welding device- TIG hose package 8 meters- HF ignition- Shielded gas pressure reducer- Electrowelding for rod electrodes- Fan cooling- Connection socket for foot switch (without foot switch)Space requirement L x W x H 850

TIG and Electric Welding Machine / Inverter ESAB Type LTN 160WIG Welding Machine for TIG and ElectrodeFabr. No. 405-423-0479 Year of construction approx. 2010Power TIG 160 Amp. = 35% ED 110 Amp. = 60% ED 80 Amp. = 100% EDL power electrode 140 Amp. = 35% ED 110 Amp. = 60% ED 80 Amp. = 100% EDNetz connection 230 Volt, 50 Hz, Schuko plug- stepless power adjustment- 2 stroke and 4 stroke operation- Operating mode rod electrode- 12 meter TIG hose package with hand torch- only DC = DC- HF ignition-

Stud welding machine KÖCO KÖSTER & CO. Type 601 EWider-stand welding machine with capacitor discharge technologyFabr. No. 5356 Year of construction approx. 1995Maximum welding current 600 Amp.Welding power at 3% ED 600 Amp.Welding power at 100% ED 100 Amp.Bolt diameter 3-8 mmMaximum welding time 550 msMains connection 400 Volt, 50 Hz, 16 Amp. Plug- Welding current adjustment infinitely variable- Welding time adjustment infinitely variable- Welding gun KÖKO K14 with stroke ignition with 2 meter connection cable- 2 pieces of ground cable with 5 meters

Impulse Shielded Gas Welding Machine REHM Type RMP 400 Hybrid (REHM Mega Pulse)Pulse Welding Machine with Inverter Welding Power SourceFabr. No. 065013 built in 1998Power 400 Amp. = 60% ED 320 Amp. = 100 % EDEinfinitely variable adjustment rangeMains connection 400 Volt, 50 Hz, 32 Amp. Plug - separate 4-roll wire feeder with connecting hose pack meter - Digital display for voltage and current- Pulse welding device with single and double pulses - 2-stroke and 4-stroke welding device - 4 meter Binzel hose pack with

TIG and Electric Inverter Welding Machine ESS Type 170 ATG (AC-DC)TIG Welding MachineFabr. No. 0907036 Year of construction 2007Power TIG 170 Amp. = 35% ED 130 Amp. = 60% ED 110 Amp. = 100% EDL power electrode 140 Amp. = 35%EDNetz connection 230 Volt, 50 Hz.- DC and AC welding- HF- ignition- Stepless power adjustment- 2-stroke and 4-stroke welding operation- Pulse welding mode- Rod electrode operating mode- 8 meter hose package with TIG torch- Shielded gas pressure reducer-

Spot welding machine DALEX type SL 16 EAMasch. No. 68611900-5 Year of construction 1986Nominal output at 50 % ED 16 KVASwelding capacity max. 50 KVA charge max. 500 mmElectrode force max. 17 - 278 daNElectrode arm 45 mmElectrode holder 25 mmArm spacing 140 mm / 280 mmCircuit breaker 8 stagesControl 4 times with single and series pointsOperating pressure 1-6 barOpen circuit voltage 1.8 to 3.6 voltsConnected load 37 kVANnet connection 400 volts, 50 Hz- Triggering of the welding cycle via

Welding machine, plastic welding machine, plastic socket welding machine, plastic welding machine, PE pipe welding machine, plastic pipe welder, socket welding tool set -Manufacturer: Ritmo, socket welding tool set type R 63 TFE -Voltage: 230V -Power: 1400W -Sleeves: Ø 16 - 63 mm, see photo -Dimension box: 450/350/H130 mm -Weight: 8.4 kg

Unused in the original packaging Microprocessor controlled MIG/MAG/MMA/TIG Lift inverter multi-process welding machine. Input voltage - 3PH 400V Mains frequency - 50/60 Hz Current range - 20-300A Maximum current - 300A @60% DC current - 205A Maximum no-load voltage - 63V Maximum current drawn - 15A Absorbed current at 60% - 10A Maximum power consumption - 9 kW Power consumption at 60% - 6.5 kW Power factor - 0.9 Auction-ID: A1-40407-38

Welding function deactivated. Stud welding head is equipped with separate welding machine (Emhart Tucker). Incl. bolt feeder (Tucker SFLM12D). Bolt welding head type: LM 240/K. Incl. 12 cartons of 800 bolts (Stanley). Auction-ID: A1-51529-114

Table load 35 to . tischdurchmesser 3,000 mms

see picture attached