wire edm used for sale

The machine is in good technical condition, after prior agreement it is possible to test it. Travels 220 x 160 x 100 mm, can be cut with wire from 0.02 to 0.2

Manufacturer: Sodick Type of Machine : Starting hole drilling machine Model: K1CS-M792 Year of manufacture: presumably 2000 Find more here - .ucymachines/ Contact us at - sales@ucymachines

This 3-axis ONA QX4 die-sinking EDM machine was manufactured in 2017. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The work tank dimensions are 1060 x 750 x 480 mm, accommodating a maximum workpiece weight of 1500 kg. If you are looking to get high-quality die-sinking capabilities, consider the ONA QX4 machine we have for sale. Contact us for further details.

This 4-axis AgieCharmilles Roboform 54 was manufactured in 2000. It features an X-axis travel of 500 mm, Y-axis travel of 350 mm, and Z-axis travel of 256 mm. The machine can accommodate workpieces up to 850 x 650 x 256 mm and has a maximum workpiece weight of 400 kg. If you are looking to get high-quality die-sinking capabilities, consider the AgieCharmilles Roboform 54 machine we have for sale. Contact us for further details.

Manufacturer: AGIE Model: Challenge 2 eCut Year of Manufacture: 2005 Type of Machine : Wire EDM machine Condition: Used, fully operational All annual maintenance documented Operating Hours - Re: 94,635 hours - Eros. Std.: 29,232 hours Electrical Data - Weight: 4,400 kg - Voltage: 3 x 400 V - Frequency: 50 Hz - Power: 9 kVA - Rated current: 15.2 A - Short-circuit current: 10 kA Travel Distances - X axis: 350 mm - Y axis: 250 mm - Z axis: 256 mm - U axis: +/- 70 mm - V axis: +/- 70 mm Technical Features - Wire diameter: variable from 0.1 to 0.3 mm (open guides) - SF module generator for fine finishing: Ra 0.12 - 0.2 um - 3D measuring probe for automatic part alignment on the machine - Variocut - Easyrun - Purecut - Dynamic Corner Control - R module - CAM link - Pieceinser Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: AGIE Model: Challenge 3 eCut Year of Manufacture: 2004 Type of Machine : Wire EDM Machine Condition: Used, fully operational All annual maintenance documented Operating Hours - Re: 109,008 hours - Eros. Std.: 27,172 hours Electrical Data - Weight: 4,400 kg - Voltage: 3 x 400 V - Frequency: 50 Hz - Power: 9 kVA - Rated current: 15.2 A - Short-circuit current: 10 kA Travel Distances - X axis: 500 mm - Y axis: 350 mm - Z axis: 256 mm - U axis: +/- 70 mm - V axis: +/- 70 mm Technical Features - Wire diameter: variable from 0.1 to 0.3 mm (open guides) - Konik-Plus for very precise conical cutting - Surface finish down to Ra 0.3 um - 3D measuring probe for automatic part alignment on the machine - 1 additional filter for very long runtimes - Variocut - Easyrun - Purecut - Dynamic Corner Control - R module - CAM link - Pieceinsert Find more here - .ucymachines/ Cont ...

Travel X/Y/Z: 350mm/250mm/256mm, travel U/V: +/-70mm, max. taper angle: 30°, max. height: 100mm, rapid traverse: 900mm/min, max. workpiece dimensions X/Y/Z: 750mm/550mm/150mm, max. workpiece weight: 200kg, max. threading height: 250mm, wire tension: 25N. Machine dimensions X/Y/Z: approx. 1650mm/2050mm/2250mm, weight: approx. 2600kg, control: Agievision. Documentation available. An on-site inspection is possible.

This 4-axis Mitsubishi SG8S was manufactured in 2023. It features a travel range of 300 mm in the X-axis, 250 mm in the Y-axis, and 250 mm in the Z-axis. The machine includes a worktable size of 500 x 350 mm and can accommodate a maximum workpiece weight of 550 kg. If you are looking to get high-quality die-sinking capabilities, consider the Mitsubishi SG8S machine we have for sale. Contact us for further details.

This 3-axis AGIE Hyperspark 2 Exact with Erowa was manufactured in 2005. It features an X-axis travel of 350 mm, Y-axis travel of 250 mm, and Z-axis travel of 250 mm. The machine is equipped with AGIE VISION 4 Software and includes an EROWA ROBOT MULTI with 60 ITS 148 places and 240 ITS 50 magazine places. If you are looking to get high-quality die-sinking EDM capabilities, consider the AGIE Hyperspark 2 Exact machine we have for sale. Contact us for further details.

Machine still visible in operation at user’s premises.

This 4-axis AgieCharmilles FORM 30 die-sinking EDM machine was manufactured in 2015. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. If you are looking to get high-quality die-sinking capabilities, consider the AgieCharmilles FORM 30 machine we have for sale. Contact us for further details.

Used industrial machine offered by IBEXTRA.

Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Full enclosure Measuring probe for complete measurement of the tools Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A Loader for up to 6 eroding disk sets (tool changer) Alphanumeric keyboard Standard programs for measuring, eroding Cooling and cleaning device for dielectric Automatic fire extinguishing device Extraction N183 1 exchange element 1 flushing set 1 measuring mandrel 1 mounting flange for rotating electrodes, X axis travel: 440 mm, B-axis: +/- 15°, Y axis travel: 876 mm, Z-axis travel: 420 mm, E-axis swivel range: 210°, A-axis rotation range: 360°, workpiece carrier base: SK 50, workpiece length max.: 200 mm, Workpiece diameter max.: 250 mm, workpiece weight: 15 kg, Connected load approx.: 6.7 kW 400V/50 Hz, Weight app ...

This 5-axis TOPEDM TSH-400T CNC EDM Spark Erosion Hole Drilling Machine machine was manufactured in 2012. It features an X-axis travel of 400 mm, Y-axis travel of 400 mm, and Z-axis travel of 390 mm. The machine includes a stainless steel table size of 480 × 458 mm and an automatic electrode changer with 21 positions. If you are looking to get high-quality spark erosion hole drilling capabilities, consider the TOPEDM TSH-400T Spark Erosion Hole Drilling Machine EDM we have for sale. Contact us for further details.

Stabilized Courses X 350 Y 250 Z 300 Table 500 x 400 mm. Maximum part size to be machined 790 x 530 x 275 mm. Workpiece basin dimensions 790 x 530 x 350 mm. Linear guides. Maximum workpiece weight 500 kg. 80 A ISPG generator ITS HEAD AXIS C 16 ELECTRODE CHANGER with MINI 32 system. 410 liters dielectric tank.

Inv. Num. : 9173 Type: CM-H32Z Producer: CHMER Created: 2001 Parameters: Max. travel length of the X-axis: 300 mm Max. travel length of the Y-axis: 250 mm Maximum workpiece length: 610 mm Maximum workpiece height: 200 mm Maximum workpiece height: 420 mm Maximum table load: 120 kg Length: 1523 mm Width: 1183 mm Height: 2158 mm Weight: 700 kg

3 x Used EDM Machines chamilles Robofill 240 cc Year of manufacture 2003 Chamilles Roboform 35 Year of Make: 2004 Tool Changer Starting Hole Chamilles SD 1 Year 2003

die-sinking EDM machine, year 1997. Used machine in good condition. More info & price on IndustrialBuyer.

Travel X/Y/Z: 500mm/3590mm/250mm, wire diameter range: 0.15mm-0.3mm, max. workpiece dimensions X/Y/Z: 1050mm/650mm/250mm, max. workpiece weight: 400kg/800kg, max. taper: 30°/100mm, wire speed: 300mm/s, max. surface quality: Ra 0.1µm. Machine dimensions X/Y/Z: approx. 2800mm/2400mm/2250mm, weight: approx. 4500kg, control: Agie, operating hours: approx. 151182h. Documentation available. An on-site inspection is possible. The image is an example.

A Sodick CNC wire EDM machine is available. Travel X/Y/Z: 750mm/500mm/400mm, travel U/V: 770mm/520mm, max. workpiece dimensions X/Y/Z: 1050mm/750mm/400mm, max. workpiece weight: 1500kg, wire diameter range: 0.15mm-0.3mm. Machine dimensions X/Y/Z: approx. 2100mm/2800mm/2350mm, weight: approx. 5300kg. Documentation available. An on-site inspection is possible.

EDM Charmilles Roboform 350 - EDM Roboform350 BJ 2006 EDM MV2400 BJ 2021

Used industrial machine offered by IBEXTRA.

table-size: . mm workpiece height: . mm three-axis-real value indicator: . 0 The technical specifications provided are based on information from the manufacturer or operator and are therefore non-binding for us. We reserve the right of prior sale, our General Terms and Conditions of Business and Sale apply exclusively. About Us Over 400 machines in our own inventory Over 15,000 m² of warehouse space, crane capacity: 70 t Over 10,000 accessory items for your workshop If you are looking to sell machinery, production lines, or your entire business, please do not hesitate to contact us. You can find additional listings on our website. Inspections are available by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition; it can be tested by prior arrangement.

Some information about the condition: Classic-3S • High-pressure pump defective (pictures attached), machine ran without any worries so far • 08.08.2023: X+Y spindles overhauled, therefore backlash-free • 07.10.2024: new U-motor installed Progress 2 • Machine functional, cuts easily at low generator levels and when finishing • Problems occur at high roughing levels because the lower gap box has a defect • 26.06.2023: X+Y spindles overhauled, therefore backlash-free • September 2024: new U-motor installed • September 2025: new stern-motor installed and timing belt renewed

The machine is in good technical condition; it can be tested by prior arrangement.

table length: 750 mm table width: 550 mm ampere: 60 A Control: Makino MGE20 x-travel: 600 mm y-travel: 400 mm z-travel: 250 mm workpiece weight: 450 kg tool change unit: 8 total power requirement: kW weight of the machine ca.: 5,00 t dimensions of the machine ca.: 3,00 x 3,50 x H3,00 m Die-sinking machine with control MAKINO MGE20 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SODICK K 1 CN ist eine Startloch-Erodiermaschine mit hoher Präzision, großer Genauigkeit und Zuverlässigkeit. Angaben zu Arbeitskapazitäten (Durchmesser, Längen, Verfahrwege, Werkstückgrößen) sind nicht angegeben. Technische Daten (Drehzahlen, Vorschübe, Stromversorgung, Abmessungen, Gewicht) sind nicht angegeben. Sie ermöglicht enge Toleranzen und eignet sich typischerweise für Automobil, Uhrmacherei, Werkzeugbau, Luft- und Raumfahrt sowie Medizintechnik. Technische Daten ohne Gewähr

NOVOTEC SD-1014 ist eine Startloch Erodiermaschine, entwickelt für Präzision, hohe Genauigkeit und Zuverlässigkeit. 3 Achsen; Werkstück max 450×300×300 mm; Tischbelastung 150 kg; Verfahrwege X 350 mm, Y 250 mm, Z 350 mm; Elektrodendurchmesser 0,3–3 mm. Dielektrikum-Aggregat 20 l; Leistung 4 kW; Maschinengewicht ~900 kg; Abmessungen 1130×1110×2330 mm. Ermöglicht enge Toleranzen; typische Anwendungen: Automotive, Uhrmacherei, Werkzeugmaschinenbau, Luft- und Raumfahrt, Medizintechnik. Technische Daten ohne Gewähr

AGIE CHARMILLES HD 30 CNC ist eine Startloch Erodiermaschine mit hoher Präzision, ausgelegt für hohe Genauigkeit und zuverlässigen Betrieb. Arbeitskapazitäten (Durchmesser, Verfahrwege, Werkstückgrößen) sind in den vorliegenden Angaben nicht aufgeführt. Detaillierte technische Daten (Drehzahlen, Vorschübe, Stromversorgung, Abmessungen, Gewicht) fehlen. Ermöglicht das Erreichen enger Toleranzen; typische Branchen: Automobil, Uhrenindustrie, Werkzeugmaschinenbau, Luft- und Raumfahrt und Medizintechnik. Technische Daten ohne Gewähr

ASTEC CDH-3 A ist eine Startloch-Erodiermaschine mit hoher Präzision, Genauigkeit und Zuverlässigkeit. Daten: 3 Achsen; Tisch 500×360 mm, max. 300 kg; Verfahrwege X300 Y200 Z200 mm; Abstand Tisch-Pinole 220 mm; Wanne 820×550 mm; Elektroden Ø0,2–3,0 mm. Technik: Generator 40 A; Gesamtleistung 4,5 kVA; Netz 50 Hz 3x 200–440 V; Gewicht ~900 kg; Abmessungen 1200×1600×2000 mm; Wanne 20 l. Geeignet für enge Toleranzen; Branchen: Automotive, Uhren, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

Cabinet dimensions: H: 2000 W: 600 L: 1000 Auction-ID: A7-49302-3003

According to photos, weight 10kg Auction-ID: A1-48554-125

Specialized metal spark Auction-ID: A1-48552-24

equipped with Heidenhain X-Y-Z digital readout Auction-ID: A1-49001-6

Technical data Manufacturer: CASTEK HUBER Machine Type: Start Hole EDM Machine / EDM Drilling Machine (Source: Online Research) Type / Model: not clearly readable Configuration Vertical EDM head Movable cross table with handwheels Electronic EDM/Positioning Control Pump and flushing unit Work light Machine cabinet Remarks The article comes from a company liquidation and was actively used in production until the plant closed. Auction-ID: A7-49302-149

Technical data CNC die-sinking EDM machine Model: OPTIMAT 505 Control Indicator: NASSOVIA Control on the pictures turned on Configuration Automatic electrode or tool changer Work container with clamping plate Separate dielectric and filter system CNC control panel with screen and hand control unit Remarks Used condition with visible signs of wear and dirt. An actual editing function or a test run is not proven on the basis of the pictures. Nameplate information is not sufficiently legible in the available pictures. Note According to the operator, the machine was actively used in production until the end. Control and power indicators are switched on in the pictures. Auction-ID: A7-49302-81

Die-sinking EDM machine Control: Heidenhain / Erocom Table 780 x 500 mm Table length 780 mm Table width 500 mm Ampere 60 / 120 A Control Heidenhain Total power requirement 14.0 KVA Machine weight approx. 4.0 t Space requirement approx. 3.0 x 2.0 x 2.1 m Auction-ID: A7-49782-429

CORMAC plunge erosion type MAGMA 4.0 Installation area 2050 X 2870 X 2670 mm Table 800mm x 480mm Races: X 600mm Y 400mm Z 400mm Auction-ID: A1-49175-4

400x190x61 1side bracket fail Can be converted into 1 platform for loading transport Auction-ID: A3-46150-11000

Incl. accessories consisting of: e.g. DSL - AES-SIGMA 20 - Suction Auction-ID: A1-49926-25

Incl. accessories consisting of: e.g. DSL - AES-SIGMA 20 - Suction ARO - Filter system, dimensions (LxWxH) approx: 2100x900x1250 mm Auction-ID: A1-49926-22

Manufacturer: MITSUBISHI Model No.: QA 20 Year: 2000 Condition: Used Stock number: 9498 Switch-on hours: 2845 h Operating hours: 2738 h Max. travel length of the X-axis: 500 mm Max. travel length of the Y-axis: 350 mm Max. travel length of the Z-axis: 300 mm Maximum workpiece length: 1050 mm Maximum workpiece height: 295 mm Maximum workpiece height: 800 mm Maximum table load: 1500 kg Tank dimensions: 1050 x 800 x 295 mm Machine weight: 3000 kg

Computer missing Incl. accessories consisting of: e.g. DSL - AES-SIGMA 20 - Suction ARO - Filter system, dimensions (LxWxH) approx: 2100x900x1250 mm Auction-ID: A1-49926-23

Defect Incl. accessories consisting of: e.g. DSL - AES-SIGMATEC 20 - Extraction Auction-ID: A1-49926-24

Auction-ID: A1-48649-123

Used incl. extinguishing system Kraft+Bauer Auction-ID: A1-49926-34

Drilling EDM machine Matra

EDM machine Agiecut Excellence 2 F BJ 2002

EDM machine Agiecut Challenge 2 BJ 2001