133,940 used machines on RESALE, but how to find them? Machine Search
Wire Stitching Machine Polygraph 703/1T Drahtheftmaschine / Wire Stitching Machine Polygraph 703/1T 1-head wire stitcher for block- and saddle stapling. Year - Serial-No. 21/4
Block- und Broschüren-Drahtheftmaschine Pad and Booklet Wire Stitching machine Drahtheftmaschine / Wire Stitching Machine AGRAFIX BX Serial-No. 1268 1 Drahtheftmaschine für Block- und Sattelheftung. 1-head wire stitcher for block- and saddle stapling.
Wire EDM machine Fanuc alpha IB BJ 2002
ID3691 Atlas Speedcut 100 year/Baujahr 2013 Wire saw, engine defect Wire saw, motor defect
Wire Bending Machine WAFIOS AG BM 30 – 2017 | Very Good Condition For sale: high-class CNC wire bending machine WAFIOS BM 30, year of manufacture 2017. The machine is in very good technical condition, with low operating hours – ready for operation without additional investment. Key parameters: Wire diameter range: 2.0 – 6.5 mm Working range: 600 N/mm²: 2.0 – 6.5 mm 1,200 N/mm²: 2.0 – 4.5 mm 1,900 N/mm²: 2.0 – 4.0 mm Optional: capability to process wire from 1.5 mm Maximum feed speed: 120 m/min Bending torque: approx. 250 Nm Number of CNC axes: 7 Equipment: Decoiler Safety fencing Drive rollers (3 pairs of feed rollers) Functionality and capabilities: Unlimited rotation angle of mandrel axis and bending shaft Precise bending head operation (vertical and lateral movements) Possibility to extend functionality (e.g. CNC support plate) High pro ...
Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -swiveling -with gear motor: SEW type R53A -Power: 380 V 0.73 kW -Steel cable: Ø 5 mm, length: 13 m -Transfer in current condition as seen -Motor: tested and OK -Dimensions: 930/300/H510 mm -Weight: 60 kg
indoor crane, crane, electric wire rope hoist, hoist, motor cable winch, motor winch, tackle, pulling winch, pulley block -Handover: in the current condition as viewed -Condition: Operation is missing a switching element (can be installed for an additional charge) -Engines: tested and OK -Nominal load: 1125 kg -Lifting speed: 6.3 m/min -Lifting height: 6.3 m -Dimensions: 1100/1000/H700 mm -Weight: 368 kg
Wire reel, pasture wire reel, barbed wire winder, wire winder, wire winding machine, pasture fence winder, winding device -Drum diameter: 800 mm -Drum width: 990 mm -Drive: hydraulic -The device could be used with a corresponding front loader or three-point hitch -without front loader mount and hydraulic connections -Dimensions: 1020/1450/H830 mm -Weight: 318 kg
Wire feed rollers for MIG / MAG hose package, feed motor for inert gas welding device, inert gas device -with: Euro plug-in coupling -Number: 4x wire feed rollers available -Price: per piece -for a surcharge: gear motor, electric motor, direct current motor are also available -Dimensions: 285/90/H180 mm -Weight: 2.5 kg
Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder -Wire straightening machine: decoiler-straightener combination -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg
SKS PF5 Wire Feeder and FPM8i Component Package Manufacturer: SKS Welding Systems Device type: Wire feeder devices and system components Total quantity: 14 pieces PF5-LEA 10-2-9: 1 piece PF5-L 10-2-21: 2pcs PF5-R GFS 10-2-104: 1 piece PF5-L GFS 10-2-108: 3 pieces PF5-L 10-2-8: 5 pieces FPM8i 10-13-200: 2 pieces Design: Industrial MIG/MAG wire feeders Wire drive: 4-roller system Scope of delivery: Wire feeder devices according to the above parts list
Wire feed drive for wire feeder case for MIG/MAG welding machine, MIG/MAG welding machine, wire feeder case, wire feeder, actuator, actuator, air damper actuator, geared motor -Manufacturer: ELVI, actuator -Actuator: Type 100605 -Voltage: 24 V -Number: 6x drive units available -Price: per piece -Dimensions: 220/200/H120 mm -Weight: 1.9 kg/pc.
Indoor crane, crane, electric wire rope hoist, hoist, motor cable winch, motor winch, tackle, pulling winch, pulley block -Manufacturer: Verlinde, control for electric wire rope hoist type VT202116 -Control voltage: 48 V -Frequency converter: Variator VT -Individual components: see photos -Delivery/Price: complete -Dimensions: 630/310/440 mm -Weight: 30 kg
Wire electrode, aluminum welding wire, aluminum welding rod made of aluminum-magnesium alloy -various manufacturers: -7x Elisental 1.2 mm SG-AlMg5 -1x MTC 1.0 mm AlMg5 -6x ALCAN 1.2 mm S-ALmg 5 -1x Thyssen 1.2 mm AlMg4.5Mn -Weight: 7 kg/roll Price: per piece
wire dia.: . mm wire length: . mm pulling capacity: 7 t total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Wafios wire straightening and cutting machine with a straightening attachment of 1000mm is available. Wire diameter range: 1.5mm-7mm, cutting length range: 20mm-3000mm, straightening rotor speed: 6800rpm, pitch: 71/69, cutting stroke: 270/min, machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 1400kg. An on-site inspection is possible.
Conveyor belt/wire webbing/rod webbing - Length: approx. 3,700 mm - Width: 600 mm --------------------------------------------------------- Conveyor belt / wire belt / mesh belt - Length: approx. 3,700 mm - Width: 600 mm
Conveyor belt/wire webbing/rod webbing - Length: 3,250 mm - Width: 600 mm - Pitch: 12.7 mm - With geared motor --------------------------------------------------------- Conveyor belt / wire belt / mesh belt - Length: 3,250 mm - Width: 600 mm - Partition: 12.7 mm - With gear motor
Conveyor belt/wire webbing/rod mesh webbing belt with center drive - Length: approx. 2,500 mm - Working width: 300 mm - with mid-drive ------------------------------- Conveyor belt / wire belt / mesh belt with center drive - Length: approx. 2,500 mm - Working Width: 300 mm - With center drive
Wire EDM machine Sodick AQ 537L with few operating hours
working direction: left-right, single head. working direction: left-right electrical power supply kW: 420
Several Wafios wire processing machines with two payoff reels are available. 1) Wafios N90, year of manufacture: 2003. Including Wafios AHL 41 D-M payoff reel, year of manufacture: 2002. 2) Wafios DS 80. 3) Wafios N5. 4) Wafios AHL 41 DR wire payoff reel, year of manufacture: 1998. 5) Wafios AHL 41 D wire payoff reel, year of manufacture: 1997. All machines including payoff reel. An on-site inspection is possible. Individual sale possible.
EDM machine Sodick AQ 327L BJ 2006 EDM machine Sodick AG 60L BJ 2020
wire diameter 3,1-5,2 mm nail length 13-150 mm capacity - pieces/min 370
x-axis: 350 mm y-axis: 250 mm z-axis: 256 mm U-axis: +/-70 mm V-axis: +/-70 mm dimension of workpiece: 750 x 550 x 256 mm Working hours: 29.559 h total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m -edm hours 29559h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter range 3,8-6 mm nail length 25-200 mm output - pieces/min 200
diameter range 3,1 - 5,2 mm nail length 13 - 150 mm output - pieces/min 370
diameter range 2,2-3,8 mm nail length 13-110 mm output - pieces/min 350
wire diameter 2,2-3,8 mm nail length 13-110 mm capacity - pieces/min 350
with assembly device for head plates wire diameter 2,2-3,8 mm nail length 13-110 mm capacity - pieces/min 350
diameter range 2.8-4.2 mm nail length 60-103 mm output - pieces/min 950
diameter range 2,2-4,2 mm nail length 13-105 mm output - pieces/min 430
Key data: 320 mm, 220 mm, 255 mm
Inv. Num. : 9242 Type: Alpha-0iC Producer: FANUC Created: 2005 Parameters: Control System: FANUC Series 180-is-WB Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 220 mm Max. travel length of the Z-axis: 255 mm Feed length in U-axis (-): 120 mm Feed length in the V-axis (-): 120 mm Max. workpiece weight: 500 kg Machine weight: 1200 kg
3:1 Wire punching and locking system, Stamping tool 3:1, round hole 4 mm, Working width up to 420 mm, Max. stamping capacity per the manufacturer: 30 sheets/80 g/m², foot switch, operation manual, A small palette with 3:1 wire-binding elements is included in the delivery.
wire diameter 2,2-4,2 mm nail length 13-105 mm capacity - pieces/min 430
diameter range 2,0-4,0 mm nail length 50-100 mm output - pieces/min 800
diameter range 2,0-4,0 mm nail length 50-100 mm output - pieces/min 800
diameter range 1,8-3,4 mm nail length 13-80 mm output - pieces/min 550
wire diameter 1,8-3,1 mm nail length 10-75 mm output - pieces/min 420
wire diameter 1,8-3,1 mm nail length 10-75 mm output - pieces/min 420
diameter range 1,8-3,4 mm nail length 10-80 mm output - pieces/min 550
diameter range 2,1-3,1mm nail length 32-51mm output - pieces/min 1600
diameter range 1,8-2,5 mm nail length 32-57 mm output - pieces/min 2000
diameter range 1,0-2,4 mm nail length 10-50 mm output - pieces/min 700
diameter range 1-2,2 mm nail length 10-50 mm output - pieces/min 520
diameter range 0,8-1,8 mm nail length 10-40 mm output - pieces/min 550
wire diameter range 10 mm width of band 100 mm feeding length 250 mm
inlet wire diameter 6,5 mm finished wire diamter 1,6 mm number of drafts 8 diameter of capstan 550 mm and 650 mm speed -meters/sek 8-12
wire diameter range 0,5 -5,0 mm width of band max 70 mm feeding length max 320 mm output pieces/min max 132 number of slides 5
dia. range 1-4 mm width of band 20 mm output pieces/min 80-150 feeding length 240 mm
maximum number of results exceeded
please refine your search
