129,666 used machines on RESALE, but how to find them? Machine Search
This 5-axis AGIE Classic 3s wire EDM machine was manufactured in 2002. It features an X-axis travel of 500 mm, Y-axis travel of 350 mm, and Z-axis travel of 426 mm. The machine is equipped with a submerged head and includes a chiller, resin filters, and a wire feed/recovery system. If you are looking to get high-quality wire EDM capabilities, consider the AGIE Classic 3s machine we have for sale. Contact us for further details.
This 5-axis Brother HS-70A wire EDM machine was manufactured in 2003. It features a CNC-A50 control, working strokes of 410 x 260 x 170 mm, and can handle workpieces up to 350 kg. The wire diameter ranges from 0.1 to 0.3 mm, supporting precise cutting. If you are looking to get high-quality EDM capabilities, consider the Brother HS-70A machine we have for sale. Contact us for more information about this machine.
Double head wire stitching machine Hohner Accord 25/40; good condition; cleaned and tested; .max. Staple thickness 25mm with folded clamp and 40mm on both sides; 2 stitching heads; Length of staple back 14mm. Double head wire stitching machine Hohner Accord 25/40; good condition; cleaned and checked; max.thikness 25mm or 40mm by both sides; 2 heads; length of clamp 14mm.
Unused machine stripping of electrical cables with both hard and soft core, suitable for electrical cables from 1.5 mm to 38 mm, is delivered in a wooden crate with dimensions lxbxh: 65x35x43 cm.
-Travel (U/V): +/- 70 mm -Maximum conicity: 30° at 100 mm -Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm -Maximum unit weight (with/without bath): 200/450 kg -Best achievable surface: 0.2 μm Ra -Available wire diameters 0.10 - 0.33 mm -Detailed specifications can be found in the PDF file -We recommend that you take advantage of the viewing day -The machine is already prepared for removal.
1 phase 220v ± 15%; frequency 50/60Hz; rated input current 25.5A; Output Current Adjustment 10-130 A; output voltage 20.4-25.2 V; open circuit voltage 56V; duty cycle 25%; power factor0.73; efficiency 80%; insulation grade F; Home Protection Degree IP21S; weight 2 KG; Dimensions 235x106x186mm
Wire-O punching machine Make Bomco Model EPS-330 Year Working width 330 mm Tools 3:1 Wire-O tool with round holes Details Electric, other tools can be purchased Available direct
Wire-O closing machine Make JBI Model MAG C54 Year 1991 Workingwidth 540 mm Details for closing all sizes Available Direct
Wire-O punching machine Make JBI Model K50T Year 1991 Workingwidth 500 mm Tools 1 x 3:1 with round holes for books, 1 x 3:1 with round holes for calenders Available Direct
Per 300 pieces in box, outer box contains 48 boxes. Lot contains 28 boxes
BIHLER GRM100 multislide punching and forming machine, Made in Germany. Machine re-engineered in year 2010 originally by Bihler, updated with servo motor, pump, rewired, new control, etc. Equipped with 4x forming slides and 18 ton press station. Gripper feed on right-hand side with straightener. Max width of strip 100 mm. Max wire diameter 10 mm. Standard feed length 250 mm max. Max operating speed 135 strokes per minute approx. Servo motor. Touch screen control. Air clutch. Weight cca. 6000 kg. Power supply 400/480V, 50 Hz. On stock more Bruderer, Schaal, and Mabu high speed presses. Also Ideal flash butt welding machines.
Automatic 3D wire bending machine was manufactured in Poland in 2022. The machine is used to automatically bend cut wire with a diameter of 4 to 8 mm. The structure made of thick-walled steel profiles, together with high-quality components, guarantee high bending precision and reliable operation. The automatic wire bending machine is equipped with a bending head with carriage and grippers and a wire feeding module consisting of a cut wire magazine and a choiceor mechanism. The workpiece taken from the magazine with a capacity of 150 kg, is fed via the wire choiceor mechanism into the feed channel, where it is pushed into the bending head and processed. At the end of the process, the bent wire falls into a receiving hopper or support table. All the capabilities of the wire bending machine are controlled by an installed PLC with an intuitive interface, taking care of the performance ...
Machine is overhauled! Auction-ID: A1-47218-19
number of stapling heads: 1 serial no.: 8074 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
One used KOCH cold rolling line Tecnicl datas: Block: 1 Drawing drum diameter: Ø 700mm Usage: Structural steel wires Run-in strength: 400 - 450 N/mm² Inlet diameter: 5.5 mm - 11.5 mm Finished wire diameter: 5.0 mm – 10.0 mm mainly consisting of: - Mecanical descaler, - Driven brush descaling - Wire lubricant application device, - drawing machine KOCH KHZ 5000 - Spooler KHS 1250 and - Control panel and control cabinet
Pallet with welding electrodes and welding wire approx. 1,000 kg total Net price 400,00 E
Key data: 8 mm
Wire straightener Mint condition For wire diameters of 9 - 15 mm
Key data: 7 mm
Wire straightener Heavy-duty design for large wire diameters New, unused For wire diameters from 7 - 15 mm Total length 1500 mm Weight: Approx. 250 kg
Control: Makino Generator: MGW-R Max.travel range: X 600 mm Y 400 mm Z 250 mm U x V axis travel +/- 75 mm Work tank dimensions: 920 x 600 mm Dialectric tank capacity: 900l Made in Japan
Control: Makino Generator: MGW-R Max.travel range: X 600 mm Y 400 mm Z 250 mm U x V axis travel +/- 75 mm Work tank dimensions: 920 x 600 mm Dialectric tank capacity: 900l Made in Japan
Control: Sodick Max.travel range: X 600 mm Y 400 mm Z 350 mm U x V axis travel 150 x 150 mm Work tank dimensions: 1050 x 710 mm Dialectric tank capacity: 800l Made in Japan
used
Diameter Capacity 3-10 mm Bending arm lenght 755 mm
Automatic punching machine for Wire-O and more Make JBI - Lhermite Model Lhermite EX610 Year 1985 Minimum size 90 x 110 mm Maximum size 530 x 610 mm Capacity up to 2.5 mm thickness depending on materials Speed up to 8.400 cycles per hour, depending on size and materials Tools Wire-O 3:1 with square holes, platic comb punch, spiral punch, 4 hole punch for ringbinders Video click here
One used KOCH KEG 5000 line with automatic spooler to produce cold rolled wire on spools and coils - Inlet Wire Dia: max. 16.0mm -Final Wire Dia: 5.0 – 14.0mm -drawing capstan: 700 mm dia with hardened steel rings - drive: 160 kW
Hydraulically driven diamond wire sawing machine. - Vertical wire sawing machine, combined with a swivel arm, for sawing various stone materials such as granite, marble, basalt, as well as concrete and artificial stone by means of a diamond rope. The machine is suitable for hand-held straight cuts, for hand-held cutting of circles with the circular cutting device and for hand-held cutting of free contours with the copying device. With the optional arc cutting device, semi-circular workpieces can be sawn fully automatically from a block of stone (a sheet template is required for each radius). With the optional saw frame tilting device, bevel cuts of up to 45° can also be made. Maximum cutting width in the projection of the machine 490 mm The maximum workpiece height that can be sawn with the machine is a maximum of 550 mm, depending on the material to be sawn. Swivel arm to ...
Hohner Orion 4 wire stitching machine; cleaned and tested; 3 stitching heads 70/20 with coarse tool; Max. Staple thickness 20mm; Clamp spacing 70-550mm; Table size 1000x330mm. Wire stitcher Hohner Orion 4; cleaned and checked; three stitching heads 70/20 with tool rough; max.thikness 20mm; distance between heads 70-550mm; table size 1000x330mm.
Cutting table for 36 NF stones. There is equipment for formats 1.4 and 2.1. The cutter only in use for 5 months
These used compact and versatile cold rolling line is completely modular and do have two bull blocks and works in addition with modular descalers, lubricant unit, stress relieving device, as well as with a pay-off and horizontal 3 ton spooler
number of stapling heads: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used machine in good condition. Available for immediate delivery. - Travel (X x Y x Z): 350 x 250 x 256 mm - Control: AGIEVISION - Dimensions (long x wide x high): 2.215 x 2.215 x 2.220 mm - Weight: 3.600 kg - Maximum power consumption: 9 kVa - Display: 15 LCD - Type of EDM : WIRE - Max. workpiece weight: 200 kg
Used machine in good condition. Available for immediate delivery. - Weight: 2.200 kg - Dimensions (long x wide x high): 1.800 x 1.600 x 2.130 mm - Travel (X x Y x Z): 400 x 250 x 200 mm - Type of EDM : WIRE - Max. workpiece weight: 500 kg
Used machine in good condition. Available for immediate delivery. - Travel (X x Y x Z): 400 x 250 x 200 mm - Dimensions (long x wide x high): 1.800 x 1.600 x 2.230 mm - Weight: 2.200 kg - Operating hours: 21.483 - Max. workpiece weight: 1.000 kg - Max. workpiece weight: 500 kg - Control: CHARMILLES
Wire Stiching Machine Polygraph 703 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Drahtheftmaschine - Wire Stitching Machine Polygraph 103 Serial-No. 6875 Manuals Included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Wire Stitching Machine AGRAFIX BX 1-head wire stitcher for block- and saddle stapling. Year 1992 - Serial-No. 190121 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Drahtheftmaschine / Wire Stitching Machine Polygraph 703/1T 1-head wire stitcher for block- and saddle stapling. Year 1999 - Serial-No. 21/4 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
maximum number of results exceeded
please refine your search
10 € 
