wire cutting used for sale

Manufacturer: Oerlikon Model: Plasmatome 20 HPC ( without cutting table ) Year of Manufacture: 2012 Cutting Range: 2,000 mm x 6,000 mm (2 x 6 meters) Material Thickness Capacity: Up to 35 mm Cutting Method: Plasma Cutting Find more here - / Contact us at -

Working hours laser on: 50921 h Working hours beam on: 21717 h Laser power: 3200 Watt Working range laser: 4000 x 2000 x 115 mm Max. steel: 20 mm Max. stainless steel: 12 mm Max. aluminium: 8 mm Length: 11600 mm Width: 5300 mm Height: 2200 mm Machine weight: 16000 kg Electrical connected load: 73 kVA

Working hours machine: 23304 h Working hours laser on: 22804 h Working hours beam on: 10185 h Laser power: 4400 Watt Working range laser: 3000 x 1500 mm Max. steel: 25 mm Max. stainless steel: 20 mm Max. aluminium: 12 mm Length: 12800 mm Width: 6300 mm Height: 2400 mm Machine weight: 15000 kg Electrical connected load: 51 kVA

Messer MultiTherm 4000Year of manuf. : 2020 ____________Description:Technical specificationsWorking surface:2000 mm x 15000 mmTotal width:5070 mmHeight:1980 mmequipment:-Global Control S with 15 colour touchscreen:-Joystick and handwheel for Global Control S panel:-Cooling for the control cabinet:-Laser diode:-Drives up to a maximum of 35 m/min. AC:-Heat shield without air cooling:-Runway for double-sided longitudinal drive HEB:-OmniFlow oxyfuel supply up to 70 m/h (gas flow control):-ALFA machine cutting torch (internal ignition):-Smartlifter 300:-SensoMat ARKI:-Full addressing of gases:-Light barriers:-Safety device for wheel housing (foot switch)

Inv. Num. : 9116 Type: PARAGON CUTTER Producer: GERBER Created: 2022 Parameters: Load capacity: 100 kg Max. material width: 2200 mm Top table length: 16800 mm Equipment: GERBER XLs125 SPREADER

A CNC water cutting system Knuth is available. Cutting dimensions X/Y: 6000mm/2000mm, travel path Z: 250mm, max table load: 600kg/m², max feed rate: 16m/min, positioning accuracy at 500mm: +/-0.05mm, repeatability at 500mm: +/-0.05mm, max operating pressure: 4000bar, total power requirement: 40kW. Machine dimensions X/Y/Z: approx. 6350mm/3250mm/4000mm, weight: approx. 4000kg. Documentation available. An on site inspection is possible.

Reference Num.: 4433 Brand: Polar Type: 78 ES Construction year: 1999 Available: 10.06.2026 Status: Not in production Location: Deutschland Cutting Size: 780 mm Electrical Power Input: 2 KW Feeding depth: 780 mm Feeding height max.: 120 mm Machine size: Length: 1,915 mm, Width: 1,550 mm, Height: 1,450 mm Total weight: kg 1,300 / lbs 2,866 Table height: 900 mm Equipment: - Lichtschranke - Programm - Lufttisch

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Auction-ID: A1-46354-24

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-41

sanding machine designed for smoothing and refining cutting boards used in the cutting process. Auction-ID: A7-46462-23

Attec Food Technology fully automatic pig cutting line consisting of: steel hanging line, dimensions: 6500 mm x 400 mm x 1700, Attec automatic primal cutting line, type: AGOL-850, order number: ON17163, year of construction: 2015, 400 V, 3 Ph, 50 Hz, 45 kW, capacity: 800 pigs/hr, product: pork carcasses, left & right, s/s outfeed belt for waste pork legs, belt width: 290 mm, automatic measuring system for precise and individual cuts of individual pork carcass, plastic belt, belt width: 800 mm, 1300 mm, 500 mm, 300 mm, 100 mm and s/s protection fence, total dimensions: 9800 mm x 4200 mm x 2200 mm. Line is never used.

Working width: 1100 mm Number of discs: 2 Auction-ID: A3-43524-1366

Type: Circular saw for metal profiles Electrical supply: 380V 50 Hz Motor power: 2.2 †4 kW Auction-ID: A7-46477-15

Bysprint Fiber 4020 4 KW - Hours: 72,000 - Cutting hours: 20,000 - Last maintenance: 12/19/2025 - All modules in order - Cutting head in order, General overhaul 2024 - Annual scheduled maintenance always carried out by Bystronic

Type: Stone cutting machine Blade: Diamond disc Cooling: Water cooling Electrical supply: 380V 3F 50 Hz Current: 20 A Auction-ID: A7-46477-11

Hartner Multi-Step Drills Precision reimagined. Efficiency made tangible. Made in Germany. The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use. What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements. Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in t ...

With the Kibani Plasma Cutter 2-in-1, you can take your metalworking projects to the next level! This powerful device combines plasma cutting and MMA welding in one machine, making it perfect for professional craftsmen and enthusiastic DIYers alike. With versatile features and reliable performance, you can effortlessly machine and repair a variety of metal types. Realistic performance for every project With a maximum cutting power of 12 mm, this device delivers excellent results in a variety of jobs. The working range of 20–40A (CUT) and 30–120A (MMA) ensures that you always have the right settings, whether you're doing fine cutting or heavy welding. Thanks to its stable operation and protection against voltage fluctuations, you can count on consistent performance. Durable and complete design The plasma cutter is designed with a robust body and a built-in automatic cooling system,  ...

Compressed Air Plasma Cutting Machine Brand: Stahlfest Type: SFPC70 Maximum cutting thickness: max. cutting thickness 20 mm Connection: 380 volts adjustable current: 20A - 60A Start: scratch-start duty cycle: 60% duty cycle (60A) Technology: IGBT Technology Protection: circuit breaker Including: plasma torch, accessories and protective cover Not included: 380 volt plug Condition: Unused and in the original packaging

The machine is in good technical condition, after prior agreement it is possible to test it. Tools A, B, C, D Number of stations in the turret 6 (size D) Number of rotary stations 3 Max. number of tools 60 of which rotary - continuously 360 30 Maximum punch diameter (size D) – single 81 mm Maximum punch diameter in magazine XMTE4M 4 x 31.7 mm Maximum punch diameter in magazine XMTE6M 6 x 24.0 mm Maximum punch diameter in magazine XMTE10M 2 x 24, 8 x 12.7 mm Working range in Y axis (with Multitool) 1300 mm Working range in Y axis (single tool) 1250 mm Working range in X axis (with Multitool) 2550 mm Numerically controlled stroke depth 0.1 – 31 mm Automatic clamp repositioning in X axis up to 10,000 mm Max. positioning speed in Y+X axis 80 m/min. Axis acceleration 10 m/sec Number of strokes – (step 1.0mm) 1000/min USB port 6 Weight 7800 kg Max. jaw opening 11 mm Max. stroke 31 mm Pow ...

CNC Portal Plasma Cutting Machine Manufacturer: Eckert Type: Jantar 2 Year of Make: 2011 CNC control Working area: 2x4 m 1 plasma torch with power source Kjellberg HiFocus 161i Automatic gas console Extraction table