137,841 used machines on RESALE, but how to find them? Machine Search
Brotschneidegatter, Fabr. MHS, model BM 45 NU
Durchlauf - Schneidegatter, Fabr. Delta
Brotschneidegatter, Fabr. Rego RMT, Type EMT 10, semi-automatic
Bread slicer, Fabr. Herlitzius
turning diameter: 330 mm turning length: 510 mm control: FANUC 18i - T turning diameter over bed: 600 mm turning diameter over slide: 550 mm x-travel: 250 mm z - travel: 580 mm y-travel: 100 (±50) mm b-axis: 0.001 mm rapid travel x/y/z: 20/7,5/24/ m/min rapid taverse: B- Achse 20 m/min c-axis: 4.500/ 6.000 ° spindle passage: 76/ 45 mm spindle nose: A2#6 spindle turning speed range: 4.500/ 6.00 U/min spindle drive: 15/ 7,5 kW Turret: 12- fach Stationen Chip coveyor: Inkl. chuck: Hauptspindel 210 mm chuck: Subspindel 160 mm total power requirement: 50,7 kVA weight of the machine ca.: 4,9 t dimensions of the machine ca.: 3.118 x 1.705 x 2.076 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cutting machine HSM type ABW-ROTA-2200 Specifications: • for foils, cork, veneer, etc. • Rotational cross-section • Cutting width max. (mm): 2100 • Heating: included • Cooling: included
cross-section width:: 800 mm cross-section heigth:: 15 mm feed:: ab ca. 5 mm speed of feed:: m/min cuts max.:: Schnitte/m condition: used, overhauled Specification: Panel cutting machine - overhauled with CE - Section width max.approx.: 800 mm - Section height max.: 15 mm, depending on the hardness of the rubber sheets - Cutting length from approx.: 5 mm (depending on material) - cutting force approx.: 10 tons - Connected load approx.: 1.8 kW - Painting: green - Operating voltage: 3 x 400V, 50Hz, N, PE - Dimensions approx.: 1,200 x 1,450 x 1,950 mm - Safety devices according to current standards, - New on-board system machine, - New control cabinet with PLC system Siemens S7-1200, - CE marking, - Instructions for use and maintenance in English or German language The data for this ad was created with ModulMWS - the s ...
Tube cutting machine manufactured in 2020. This Bodor X2260 features a powerful 3 kW laser and is equipped with a CNC control panel interface, automatic chuck system, and a dedicated extraction system. It also includes a tube support roller and conveyor loading bed for enhanced efficiency. If you are looking to get high-quality tube cutting capabilities, consider the Bodor X2260 machine we have for sale. Contact us for further details.
Cutting machine Paper cutting machine Polar 58EM Year of construction: 1991 Very good condition!
we sell a Pallmann granulator IPS 50x1000. Year of construction :2001. The machine is fully operational. The regrind discharge is equipped with an extraction chute. Optionally, we can also offer you other system components, e.g. Cyclone, etc. Control cabinet with input load switching is included.
M. No.: 7061504 Format (cm): 78 Equipment / Additional information: Side table, air table, 1x reserve knife
ECKERT JANTAR 2 plasma cutting machine was manufactured in Poland in 2010. The machine with a reliable plasma torch and a large work table with a length of 3000 mm and a width of 1500 mm guarantees its user excellent precision in the machining of thin and thick metal sheets, as well as ensures a high degree of operational safety and long-term failure-free operation. The contamination generated during the process is effectively eliminated by the extraction table, covering the entire working area of the machine. The ECKERT plasma cutting machine is also equipped with a powerful HYPERTHERM HPR130XD plasma source with a power of 130 A and a modern CNC ECS 872 controller. Technical data of the ECKERT JANTAR 2 plasma cutting machine - CNC control: ECS 872 - work table area (L x W): 3000 x 1500 mm - work area (L x W): 3000 x 2000 mm - plasma source: HYPERTHERM HPR130XD - extraction tabl ...
Key data: 3000 mm, 1500 mm, 6000 W
3000 x 1500mm Dynamic Edition
Bandwidth. 500 mm Strip thickness.. 0.3-2.5mm Coil weight. 5,000 kg Velocity. 70 - 120 m/min. Coil I Diameter.. 508 mm Coil A diameter. 1,500 mm
Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutting -Manufacturer: Alrowa, thread cutting head with Strehler jaws -Type: No6 -inch thread: 1 1/2 - 3 -Accessories: incl. 3 sets of Strehler jaws, see photos -Dimensions: 950/200/H150 mm -Weight: 15.7 kg
Key data: 2 mm
Bandwidth... 1,550 mm Strip thickness 0.5-3.0 mm Coil weight. 15,000 kg Coil I Diameter 508 mm Coil A Diameter... 1,600 mm Straightening rollers 23 pcs. Execution. 6 high Stainless steel / aluminium
Key data: 2 mm
Bandwidth 15.00 mm Strip thickness. 0.5 - 2.0 mm Coil weight... 7,000 kg Profiles... 4 pcs. Speed approx. 20 m/min. Straightening rollers 7 pcs. Complete cut-to-length and cut-to-length line with decoiler, insertion table, straightening machine, cross shears, Longitudinal scissors, electric control.
Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutting -Manufacturer: Alrowa, thread cutting head with Strehler jaws -Type: No23 -inch thread: 1/4 - 1 1/2 -Dimensions: 730/150/H125 mm -Weight: 8.0 kg
Dimensions: 1. - 4500x800x2500 2. - 4500x800x2500 Auction-ID: A1-50229-20
Ref. -No.: 10371 Manufacturer: LVD Year of construction: 2013 Type of control: CNC Control: 31ilb Storage location: Halberstadt Country of origin: Belgien Structural steel: 15 mm stainless steel: 8 mm aluminum: 6 mm Laser source: Co2 - 4KW Edit size: 6000 x 2000 mm changing table: Yes tension: 50 Hz - 400 Volt Serial no.:: 348XX Operating hours: 31280 H Electrical connection: IEC X-Axis: 6200 mm Y-Axis: 2100 mm Max capacity: 4 kN Max. weight: 25055 KG Dan Performance: 75 kW Machine type: 62-21 cutting head: LM2000 NC Focus Process control: LM2500 Capacitive sensor: LM2301 EG8030 Further information: Last maintenance incl. new PC in 04/2023
Ref. -No.: 10368 Manufacturer: BYSTRONIC Year of construction: 2011 Type of control: CNC Control: Bystronic ByVision Storage location: Halberstadt - Germany Country of origin: Schweiz Manufacturer: BYSTRONIC Laser medium: CO² Kohlenstoffdioxid wavelength: 10600 Nm Maximum power: 6000 Cw Workspace X: 3048 mm Work area Y: 1524 mm Stroke Z axis: 100 mm Positional deviation Pa: +/- 0.1 mm/m Position spread Ps: +/- 0,05 mm Positioning in axis-parallel X and Y maximum: 120 m / min Positioning simultaneously X/Y maximum: 169 m / min Axis acceleration X/Y maximum: 30 m/s^2 table load capacity: 890 kg table change time: 25 s
Fiber Tube Laser with Automatic Wire Feed FLV-TA-6024 3kW Technical Parameters - Maximum profile height: 240 mm - Maximum profile length: 6000 mm - X- and Y-axis positioning accuracy: ± 0.05 mm/m - Repeatable positioning accuracy of X and Y axis: ±0.03 mm - Maximum Acceleration: 0.0G - Power: 3.0 kW - Source brand: Raycus or MAX Photonics to choose from - Power supply: ~3x400 V 50 Hz - Protection class: IP54 Depth: - Steel S235: recommended depth 20.0 mm, maximum depth 22.0 mm - Stainless steel: recommended depth 8.0 mm, maximum depth 10.0 mm - Aluminum: recommended depth 6.0 mm, maximum depth 8.0 mm - Brass: recommended depth 5.0 mm, maximum depth 6.0 mm Construction The machine is very stable thanks to the welded construction. High-speed movement of the head with high precision is ensured by Japanese Fuji servo drives. Automatic lubrication system for axle ...
Dimensions: 1. - 2300x600x2250 2. - 4500x800x2500 3. - 4500x800x2500 Auction-ID: A1-50229-21
This 3-axis TRUMPF TruLaser 3030 (3.2 kW) was manufactured in 2014. It features a substantial travel range of 3000 mm on the X-axis and 1500 mm on the Y-axis, making it suitable for various cutting applications. The machine includes a TRUMPF LoadMaster automated sheet loading system for enhanced efficiency. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 3030 machine we have for sale. Contact us for further details.
Mazak machining center mod. FH 480 Year 1995 X = 560 Y = 560 Z = 510 Cutting speed 32,000 mm./min 12,000 rpm CNC Mazatrol M Plus
The machine has been professionally retrofitted, with an upgraded control system featuring a digital operator panel on the left side and improved safety guards, and was fully operational until a few years ago. Without nameplate or documentation. An on-site inspection is possible.
Offer via gebr. overhauled pipe cutting and chamfering machine Fabr. Georg Fischer / Orbitalum Type RA8 Year of construction 2007 Specifications: Tube Outer Diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 150 - 270 rpm. Electronic speed levels 1 - 6 Power 1600 W incl. mounting plate, assembly table used, in good condition.
120651 Hoofdgedeelte van de fakkel NIEUW 2405 GEMAAKT IN DE VS 2 stuks op voorraad, NIEUW
Plasma cutting machine manufactured in 2019. This KOIKE PNC-12 Extreme features an effective cutting area of 1,500 x 3,000 mm and a maximum programmed cutting speed of 3,000 mm/min. It includes a robust downdraft cutting table and a Cebora plasma power source with a maximum cutting current of 110 A. If you are looking to get high-quality plasma cutting capabilities, consider the KOIKE PNC-12 Extreme machine we have for sale. Contact us for further details.
welding current: 20 - 60 A cutting capacity: 1 - 20 mm open-circuit voltage: 104 V Required air-pressure: min. 4 bar connected load: 7,9 kW connected load frequency: 400 V weight: 16 kg Dimensions (LxWxH): 480 x 260 x 360 mm Digital display. Surge protection. Plasma torch. Earth cable. Reducing valve with moisture separator. Equipped with IGBT technology Delivered without CEE plug. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cutting width: 780 mm Cutting height: 1080 mm Cut control system with display Programmable back gauge positions Motorized back gauge Hydraulic clamp Air table Optical cutting line Light curtain safety system Fully automated operation Side tables
6000w TruDisc 3000 x 1500mm Big specification
4000 x 2000mm 10KW Fiber laser / 10,000w Fiber laser
WaterJet KIMLA STREAMCUT 3116 build in 2017 in Poland, uses innovative waterjet cutting technology for machining among others steel, plastics and glass. Workpieces with a maximum thickness of 200 mm are cut on an easily accessible working area by the 3D head, programmed in the intuitive KIMLA software with many useful functions. The use of state-of-the-art technology combined with reliable components and a sturdy design guarantee the achievement of clean and precise edges along the entire length of the workpiece, regardless the type of machined material. During its use, the KIMLA 3116 water cutting machine was used to cut rubber using only water and underwent regular maintenance. The total weight of the machine is 2500 kg. Technical specifications of the KIMLA STREAMCUT 3116 water cutting machine - machinable materials: steel, stone, glass, plastics, tiles, etc. - work area dime ...
Year of manufacturing: 2009 19? Monitor and Programm Side-table left with Air Side-table right with Air Air Table Photocells
Polar 115 EM Monitor Year: 1992, Air Table, 1 Spare knife, Side Table, Monitor, Program
Rondo Doge Cutting Table Year of construction 2002 63cm bandwidth completely stainless steel with calibration head attached Cutting frame with protective grille with bracket for 2 rollers with attached filler#ät with 2 Tichter with adjustable guillotine Speed adjustable Band height 90cm
maximum number of results exceeded
please refine your search
200 € 
