128,150 used machines on RESALE, but how to find them? Machine Search
cutting plotter dmsDIGITAL SINAJET DT0906-MT with delivery Specifications: • Machine is already dismantled and stored • Functions (possible in one operation) -Cut - Cutting/scoring -Grooves - Draw/mark • Integrated tools - Tungsten carbide tangential knife for material up to 6 mm, actively rotating - Cutting tool for thin material/slitting tool, rotating (drag knife) - Creasing tool or perforation tool, actively rotating -Pin Accessories: • dmsDIGITAL BAS 70 stand-alone storage system with sensor-controlled speed adjustment, automatic Height adjustment of the stacking table and PLC control • CCD camera for reading registration marks • Prepared as standard for the use of an oscillating knife • TCC automatic tool calibration for tangential knives and oscillating knives • Ehternet connection • Graphic Interface on PC interface (PC must be provide ...
3000 x 1500mm / 5000w / Siemens 840 - Single Head Technology
Offer via gebr. outdated pipe cutting and chamfering machine Fabr. GF GEORG FISCHER Type RA8 / RA230 Saw has been completely overhauled and tested. - completely new engine. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 40 - 215 rpm. Speed levels electronically 1 - 6 Power 1800 W incl. mounting plate used, in good condition.
Chassis number 50145 Year of construction 1991 Voltage 380V / Freq 50 Hz An automatic cutting table specifically designed for cutting laminated glass (with PVB or EVA). Below you'll find the key specifications and features. Technical specifications Machine type: Automatic cutting table for laminated glass (PVB/EVA) Maximum glass size: approx. 3300 mm Processable thicknesses: from 3+3 mm to 10+10 mm Cutting head: CNC controlled Automatic pressure adjustment depending on glass thickness Simultaneous cutting of both glass layers Breaking system: Breaking bar for mechanical breaking Thermal separation via linear resistance (heating element) Cutting accuracy: ± 0.3 mm Work surface: air cushion table (air float) for easy glass transport Control & programming: Input of cutting formats and patterns Possibility to upload files (CNC programs) Machine dimensions: approx. 36 ...
The Bottero 301C is a laminated cutting table, specifically designed for cutting and separating laminated glass. Key specifications include: weight approximately 2.8 tons, power 10–11 kVA, max. cutting length 3400 mm, glass thickness 3–10 mm (monolithic up to 19 mm), 380V/50Hz connection. Technical specifications Bottero 301C Brand / Type Bottero 301C Chassis number GG301C-6708 Year of construction 2000 Machine type Cutting table for laminated glass (semi-automatic) Weight ± 2,800 kg Power 10.9 kVA – 50 Hz Electric 380V connection Machine dimensions: Length 4900 mm, width 3350 mm, working height 930 mm Transport dimensions approx. 4.2 × 2.4 m + 4.8 × 1.0 × 1.6 m Glass thickness range 3 – 10 mm laminated, 33.1 – 66.2 mm PVB; monolithic up to 19 mm possible Max. cutting length 3400 mm Functions Cutting, breaking and separating lami ...
Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.
The Bottero 131BMK is an automatic float cutting table for flat glass, designed for straight-line cutting. Below you'll find the key technical specifications and features. Technical specifications Bottero 131 BMK Machine type: Float cutting table (monolithic glass) Brand/Model: Bottero 131 BMK Year of construction: 2000 Chassis number: GG60KB-6011 Weight: approx. 2,250 kg Power: 14.2 kVA Power supply: 380 V / 50 Hz Air pressure: 3 bar compressed air required Maximum speed: 80 m/min Glass thickness: 2 – 18 mm Maximum glass size: 2550 × 3300 mm Capacity: Straight cutting, no shaping/cutting of complex patterns ⚙️Features Automatic cutting table with CNC control for straight-line cutting. Optimization software (depending on version) for cutting patterns. Pneumatic scoring system suitable for float and low-e glass. Robust design for long-term industrial use. ...
The Bottero 301C is a laminated cutting table, specifically designed for cutting and separating laminated glass. Key specifications include: weight approximately 2.8 tons, power 10–11 kVA, max. cutting length 3400 mm, glass thickness 3–10 mm (monolithic up to 19 mm), 380V/50Hz connection. Technical specifications Bottero 301C Brand / Type Bottero 301C Chassis number GG301C-164 Year of construction 1994 Machine type Cutting table for laminated glass (semi-automatic) Weight ± 2,800 kg Power 10.9 kVA – 50 Hz Electrical connection 380V Machine dimensions: Length 4900 mm, width 3350 mm, working height 930 mm Transport dimensions approx. 4.2 × 2.4 m + 4.8 × 1.0 × 1.6 m Glass thickness range 3 – 10 mm laminated, 33.1 – 66.2 mm PVB; monolithic up to 19 mm possible Max. cutting length 3400 mm Functions Cutting, breaking and separating lamina ...
Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.
The Bottero 353 BKM-R is an advanced float glass cutting table designed for loading, cutting, and breaking glass sheets. This model combines high precision, speed, and flexibility and is suitable for both series production and special pieces. Year of construction 2018 Chassis number: 30900400001784-01564_011 Plastic film cutter Glass thickness: 2 – 19 mm Maximum cutting speed: 150 m/min Maximum plate size: 3810 × 2750 mm Table type: tilting, hydraulically operated Air cushion system: centrifugal fans, MDF plan with felt Cutting bridge: steel bridge, placed transversely Rack and pinion system: gears facing downwards to prevent dirt build-up Cutting head: aluminum alloy, automatic glass thickness detection, proportional solenoid for pressure control Software: Shape Scanner, Sonar detection for special materials, BCMS Windows optimizer Machine dimensions: width 3596 mm, le ...
SCHNELL SHEAR LINE 300 rebar cutting and bending line was built in 2008 in Italy by Schnell S.p.a. The electrical installation was overhauled in 2024. The SCHNELL SHEAR LINE 300 is a reliable system designed for serial machining of rebar with a maximum diameter of 50 mm. It integrates all the necessary equipment that is responsible for cutting, bending, optimising, storing and handling bars. The entire production cycle, from feeding to the collection of the finished parts, is performed fully automatically. The SCHNELL SL 300 stirrup production machine is fully complete and consists of the following components: – control console – FA/6/14 storage rack for steel – SCHNELL CGS 300 HDY guillotine shears – SCHNELL VBM 12/2 measuring and cutting track with single-sided unloading – SCHNELL ROBOMASTER 45 automatic rebar bending machine – rebar storage and retrieval system ...
The SERVOCUT 602 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machines ...
IDEAL Krug & Priester 1080 Lever Cutter Cutting Machine Material knife grinding angle 75° Ideal for cutting paper, cardboard, linoleum, plastic and metal foils, thin sheets and other materials Regrindable knife set made of Solingen knife steel Complete with solid base and foot pressure Fold-out side table, right Side stop with scale in mm and inches Infinitely adjustable back gauge with locking screw Front gauge with locking screw and narrow cutting device Dial knob for exact measurement of the front gauge Printed DIN format classification A3 to A6 Fixed, transparent blade guard made of shatterproof plastic and knife locking device Particularly stable knife bearing made of cast aluminium and double-bearing knife axis for precise cuts Extremely robust metal construction GS Seal of Approval Brand quality Made in Germany Cutting length: 800 mm Cutting capacity: approx. ...
The laser BYSTRONIC BYVENTION 3015 was manufactured in 2009 in Switzerland. The laser cutter is equipped with two cutting heads: 5 and 7.5 inches. Technical parameters : - laser source power: 2200 W - punching machine hours: 17487 h - 2 cutting heads: 5 and 7.5 inches - maximum size of the processed sheet: 3000 x 1500 mm - maximum cutting thickness, black steel: 8 mm - maximum cutting thickness, stainless steel: 6 mm - maximum cutting thickness, aluminum: 4 mm
Year of construction 2023 With this motor-driven cutting machine, goods such as cables, pipes, hoses, steel cables, plastic profiles, etc. can be measured for length and cut off. The powerful feed makes it possible to pull directly from an unwinding system without a motor, such as a drum rack or drum unwinder. In conjunction with a pot wrapper, the cut-to-length goods are wrapped in rings. • Cutting machine for cables, wires, hoses and much more. Technical data AUTOCUT 40 Winding material Ø (deviating from conformity assessment) 1 - 30 mm Inlet height approx. 1000 mm Direction of passage from right to left L x W x H approx. 1160 x 950 x 1550 mm Height with open protective cover approx. 2050 mm Length with pot winder approx. 1800 mm
Spare parts for smooth cutting head board Baader 424 / 429 (Straight Cut Heading Machine Baader 424 / 429). Almost all spare parts are available in stock or at short notice.
Fully automatic bread slicer MHS Type: MHS BASIC L Technical data: Cutting Gate Bread Slicer Cutting thicknesses: 10 mm Bread passage: H 17 cm x W 45 cm x D 34 cm Bread rack to bag 230 Volt / 0.75 kW / 3 A Weight: 200 kg Total dimensions: H 114 cm x W 59.5 cm x D 73 cm Mobile on 4 pulleys with 2 brakes Cuts almost all types of bread (including yeast braids) Soft feed for particularly gentle cutting Lubrication without oil pump Minimal maintenance costs due to high ease of maintenance Simply click out the used felt and dispose of it The new felt is simply hooked into the existing guide Year of Make: 2015 Function checked, machine ready for immediate use! Condition, see original pictures! If you have any questions, email or call.
MEGAPLOT XTR PRO 1200 CNC foam cutting machine was built in 2020 in Poland by Megaplot J.Wójcicki M.Jagła SJ. The machine enables precise cutting of any shape in a wide range of rigid foams, soft foams and rockwool. Cutting is performed fully automatically by means of an endless wire, which accelerates to a speed of 280 km/h. Project files, including shapes and their layout, can be prepared in any graphics program (CorelDraw, AutoCAD etc.). This is because the advanced FastWire software supports all major file formats. The MEGAPLOT XTR PRO upholstery foam cutting machine is also equipped with a controller which enables simulation of the cutting process and setting of the machining parameters with their change during the cutting. All this makes the offered machine an excellent choice for businesses producing, among others, insulation elements, packaging and upholstered furniture. Tec ...
Huller thread cutting machine vith hydraulic vice. Thread head from M3 up to M27 Machine is perfect for serial work.
Automatic program Safety guard 2 x standard L knives length 320 mm 1 other tool Machine complete in working conditions, sold as is.
Stock - No. 2537 1 used,, functionally tested cutting mill/granulator Manufacturer: Alpine Hosokawa Type: RO 50 / 80 Built: 1993 Material feeding hopper: 500 x 840 mm Opening hydraulic Rotor diameter 500 mm x width 800 mm Rotor semi-open, 4 rotor V-cut - 2 Fixed blades Drive 55 kW Sieve diameter 10 mm Blower and Cyclone Throughput up to approx. 800 kg/h depending Material Machine is ready for demonstration from the Wuppertal plant, Date by appointment More granulators from stock ready to show, Ask for our current stock list or visit : plasticotrading
Finova Portioning & Packaging Line A fully integrated, factory-crated Finova portioning and packaging line designed for precision cheese processing. Built in 2022, this unused system combines cutting-edge technology for cutting, X-ray inspection, weighing, MAP flow pack wrapping, and gas control in a compact, ready-to-deploy format. System Overview Subsystem Manufacturer Description Primary Cutter Finova Cuts 200x600x900 mm or 100x300x500 mm cheese blocks into logs/portions Disassembly & Alignment Finova Converts bars to individual format, aligns for X-ray X-ray & Calibration Finova Inline scanning, volumetric calibration, weight-targeted cut logic Weight Check & Reject Finova Weight verification with automated reject for non-conforming products Portion Cutter Finova Servo-controlled, programmable vertica ...
used
Wabäma WSG CLASSIC 460/11 Bread cutting machine / Bread gate 10mm Y.O.M. 1999 Condition: Used as available Manufacturer Wabäma GmbH Model: WSG Classic 460.11 230 V / 3.4 A /0.75 kW Weight: approx. 175 kg Dimensions: approx. 62 x 68 x 128 cm Visit possible at any time on site.
ECKERT AGAT SPEED oxy-fuel cutting machine was built in 2020 in Poland by ECKERT AS Sp. z o.o. The machine is used for thermal cutting of workpieces with a maximum thickness of 100 mm. The machining process is performed by means of a reliable oxyfuel torch according to pre-programmed cutting programmes or by manually controlling the cutting path. Workpieces machined in this way stand out for their perfectly smooth and even edges, regardless of the type of material. The open design of the machine, on the other hand, ensures free access to the work area from all sides, as well as excellent stability during even the most demanding challenges. The AGAT SPEED oxyfuel cutting machine is offered with an extensive equipment, consisting of, among others, the ECS 872 intelligent CNC controller and an oxygen torch support with capacitive distance sensor. Technical specifications of the ECKERT AG ...
BaumannPerfecta 115 Age: 2022, installed 12/2022 Available: April 2026 • 24" tiltable color display touch screen • Process visualization, real time Animation and displaying half and full finished jobs • Program steps in self‐explaining list • Electronically adjustable backgauge speed and clamp pressure • Automatic clamp pressure adjustment • Pre‐selectable clamping time extension‐ 0 to 9,9 seconds • Integration of Prepress data CIP3/CIP4 from existing customer workflow (option) • Structure of the surface in simple operating mode, list mode, graphic mode • Password protected user accounts • Comprehensive diagnosis / service area Cutting table width [mm] 1150 Rear table length [mm] 1150 Maximum clamp opening [mm] 165 Smallest cut/ with false clamp [mm] 20/77 Backgauge return speed [mm/s] 300 Cclamping force [kN] 2.5‐45 Safety p ...
Bread cutting machine Treif Pegasus 2616 -Bread cutting machine without oiling -for long loaves -complete in stainless steel -with sickle knife -Cutting width adjustable from 4 to 14mm -mobile on wheels -Year of construction 2000
Inlet: 1200 x 950 mm Rotor width: 1200 Rotor diameter: 800 Stator knife: 4 Rotor blade: 7 x 4
GERBER Cutter Z7 automatic cutting machine was built in 2016 in China by Gerber Technology (Lectra). The machine is used in the production of clothing and all sewing products. It can cut both single and multi-layered fabrics with a maximum thickness of 7.2 cm (after compression). Cutting is performed by means of a robust, vertical oscillating knife, which ensures the highest cutting precision and shape repeatability regardless of the type of material. The advanced Knife Intelligence Plus” system controls the movement of the knife, changing its angle, cutting path and acceleration in real time to ensure precise cutting of repeatable parts for all layers every time. Cutting paths are additionally optimised by the SMARTbite system, which automatically adjusts the knife advance speed based on the height and type of overlap. The oscillating knife is continuously sharpened during cutting, ...
cutting , trimming saw machine for solid wood MZ PROJECT LC 3000 second hand machine CE regulation: YES lengthwise cutting of solid wood planks and panels length max. of cut mm. 3000 with automatic ( NC ) pusher for cutting width mm.1500 conditions of working : Excellent main motor power Hp 15 weight kgs. 2.600 volt. 380/50
Cutting mill Manufacturer: NEUE HERBOLD Built: 2001 Drive: 7.5 kW for the grinding of foils: optional with roller feeder type EB 290 (drive 0.75 kW)
Cutting LEO with extended inlet belt Pretzel Rolls Baguett - Tailor Table unit made of stainless steel Knife height adjustable for average Band speed adjustable DGUV V3 tested Connection 230/240V, 50 Hz, plug-in Transmission width/height 140/ 90 mm Dimensions (WxDxH) in mm: 1700 x 440 x 470 NEW Machine With warranty Optional: - Driving table for LEO - Cut - Frach kosten
CUTTING GATE FOR DICER RÜHLE typ SR 1- used Cutting gate sizes to the choice /optional/ : 6 and 24 mm Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT id: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36 abc.inter-wiba.com.pl info@inter-wiba.com.pl
TECHNICAL DATA: Working area 3,000 x 1,500 x 115 mm Control Siemens Sinumerik 840 D Laser power 5,000 watts Max. sheet thickness structural steel 25 mm Max sheet thickness stainless steel 20 mm Max sheet thickness aluminium 12 mm Machine regularly serviced by TRUMPF! Standard: - Closed machine frame with integrated laser unit - TRUMPF laser TLF 5000 - Laser unit: CO2 laser, high-frequency excited, maintenance-free turboradial blower, cooling unit, logbook function - Automatic pallet changer and longitudinal conveyor belt - Drives: Gantry drive in combination with linear direct drives - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Plasma sensor inges, PMS - Automatic sheet metal edge detection - Programmable performance cycles - Microweld - Automatic nozzle cleaning - Fast editing with SprintLas - ContourLas for making small ho ...
Slicer WABÄMA: knives thickness 9 mm, new knives; power 0.5 kW/380V semi-automatic lubrication; automatic adjustment of the height at the upper plate of bread;
3000 x 1500mm 4000w With Bytrans Extended loading/Unloading
diameter range 3-10 mm cutting length 10-130 mm
TECHNICAL DATA: Max oscillation length mm: 100 Max depth of slots mm: 80 Spindle center distance min mm: 84 / max 1170 Spindle rotation rpm: 6.000 / 12.000 Processing: double sided Weight Kg: 2250
TECHNICAL DATA: Clamping height max mm: 1040 Tenoning depth max mm: 150 Slot length max mm: 340 Main motor power HP: 3 Weight Kg: 340
diameter range 3-10 mm cutting length 10-200 mm
maximum number of results exceeded
please refine your search
250.000 € 
