wire cutting used for sale

Electronic wire welding machine, model mig 400 -pl, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-47248-255

Electronic wire welding machine, model MIG 400-PL, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-47248-65

Electronic wire welding machine, model MIG 400-PL, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-47249-65

Workbench Manufacturer: GARANT Stable workbench / assembly workstation in steel construction Wooden worktop Perforated plate rear wall with cross beam Lower shelf available Use in the field of wire EDM machine Accessories / Contents Includes extensive accessory package according to illustrations Clamping claws, clamping screws and clamping blocks Stops and clamping devices Measuring equipment and digital calipers Dial gauge / probe Tool holders and clamping plates Small tools and fastening material Grease guns, hammers, files and brushes Spare parts and bearings Partially visible lubricants / maintenance material Private documents, liquids, spray cans and other hazardous substances are not part of the offer and will be removed before handover. Auction-ID: A7-46939-61

Machine very well maintained, operating in a clean workshop and used for small-series production. Hard drive recently replaced. Inspection possible.

Used industrial machine offered by IBEXTRA.

Used industrial machine offered by IBEXTRA.

Wire EDM System GF AgieCharmilles CUT 2000 with loading robot (WorkPartner) General Information Machine type: CNC wire EDM machine with automation Model: CUT 2000 Automation: GF WorkPartner loading robot Control: Vision 5 (Windows XP) Generator: AGIE IPG-V high-performance generator Operating Hours Power On:  91,716 h Work On: 17,889 h Working Area / Travels X-axis: 350 mm Y-axis: 250 mm Z-axis: 256 mm U/V Axes Travel: ±70 mm Workpiece Data Max. workpiece size (W × D × H): 750 × 550 × 250 mm Max. workpiece weight: 200 kg (standard), 400 kg (optional / bath load) Working table: 700 × 450 mm Machining Parameters Taper: 30° at 100 mm workpiece height Available wire diameters: 0.10 – 0.30 mm Best achievable surface finish: Ra 0.05 µm Wire threading: automatic Dielectric System Dielectric capacity: 700 liters Flushing: coaxial flushing system Cooling: external cooling ...

X-axis: 500mm, y-axis: 350mm, z-axis: 256mm, taper cutting device: U=70mm, V=70mm, connected load: 9kVA, rated current: 13.1A, weight: 4.4t, equipment: automatic wire threading, lowering water tank, universal clamping frame, hand-held control unit, AgieSetup 3D automatic workpiece position compensation, flushing gun, paper cartridge filter and Lei/Wirecut programming software with dongle. An on-site inspection is possible.

Baseus N1 Plus outdoor surveillance camera 2K 2-Cam Kit S0TY002131 IP Surveillance Set WiFi Set of 2 pieces 2304 x 1296 Pixel The Baseus Security N1 Plus 2K camera set provides simple and effective security for your home. The high-resolution 2K cameras (2304x1296 pixels) deliver clear and detailed photos and videos. Thanks to the large 145° ultra-wide-angle lens, you can capture a wide surveillance range while avoiding blind spots. The 8x digital zoom allows you to view certain areas with particular precision and thus keep an eye on all the details. The cameras' colour and infrared night vision function enables clear and detailed images even in complete darkness. A powerful 100 lumen LED floodlight is automatically activated when a movement is detected and enables optimal visibility at night. The powerful 9600 mAh battery provides up to 270 days of battery life on a single charge. (Thi ...

CHARMILLES TECHNOLOGIES ROBOFIL 510 with Charmilles control system. Travel paths X/Y/Z: 500 x 350 x 400 mm. Equipped with Erowa chuck, Erowa ITS rotary changer (24-fold), ManoSet XL, and a comprehensive clamping package. Includes additional flushing, water/water heat exchanger, and water cooling unit. Documentation available. Used, functional. Connection 3~ / 400 V / 50 Hz, power 10 kVA, current 15 A. Automatic wire tensioning, precise wire guidance, stable construction. Control console (Siemens), protective devices, emergency stop.

AGIE AGIECUT PROGRESS 2 Wire EDM machine Workpiece height: approx. 250 mm Workpiece weight: approx. 400–500 kg Table size: approx. 600 x 400 mm Supply voltage 3 × 400 V, frequency 50 Hz, power 12.1 kVA, rated current 17.5 A, short-circuit current 10 kA. Wire EDM technology, automatic wire feed, hydraulic systems, robust construction. Control panel, emergency stop, sensor monitoring.

Wire grating for pallet rack, size 88x110 Auction-ID: A1-47062-24

Baseus N1 Plus outdoor surveillance camera 2K 2-Cam Kit S0TY002131 IP Surveillance Set WiFi Set of 2 pieces 2304 x 1296 Pixel The Baseus Security N1 Plus 2K camera set provides simple and effective security for your home. The high-resolution 2K cameras (2304x1296 pixels) deliver clear and detailed photos and videos. Thanks to the large 145° ultra-wide-angle lens, you can capture a wide surveillance range while avoiding blind spots. The 8x digital zoom allows you to view certain areas with particular precision and thus keep an eye on all the details. The cameras' colour and infrared night vision function enables clear and detailed images even in complete darkness. A powerful 100 lumen LED floodlight is automatically activated when a movement is detected and enables optimal visibility at night. The powerful 9600 mAh battery provides up to 270 days of battery life on a single charge. (Thi ...

Cup brush angle grinder wire brush, Ø 75 mm + Ø 100mm M14 angle grinder wire brush set, flex steel knotted wire Auction-ID: A1-40890-8

Wire Grating for Pallet Rack Quantity 32 size 88 x 110 Auction-ID: A1-47062-25

AGIE CHARMILLES wire EDM machine model CUT 30 P equipped with CNC control and automatic wire guidance system. Designed for high-precision machining of molds, dies, and complex metal parts using Wire EDM technology. Equipped with integrated working tank and dielectric bath cutting system. Suitable for precision manufacturing and industrial production work. Auction-ID: A7-47328-16

AGIE CHARMILLES wire EDM machine model CUT 20. Equipped with CNC control, automatic wire guiding system and integrated work tank. Suitable for high-precision machining of dies, molds and complex metal parts using wire EDM technology. Enclosed cab for dielectric bath work and precision cutting operations. Auction-ID: A7-47328-6

Machine is overhauled! Auction-ID: A1-47218-19

AgieCharmilles wire EDM machine model CUT 20 for high-precision machining by electric discharge. Equipped with CNC control, automatic wire guidance system and worktable for precision parts. Suitable for the manufacture of molds, dies, punches and complex components in conductive materials. Includes filtration unit and integrated dielectric system. Auction-ID: A7-47328-36

table length:920 mm table width:600 mm ampere:13,2 A weight of the machine ca.:6 t dimensions of the machine ca.:2,46 x 2,24 x 2,33 m X-axis:600 mm y-axis:400 mm Z-axis:260 mm max. table load:1500 kg The dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg.

The servoCUT 402 / 502 / 602 cutting machines is designed as a wet cutting grinding machine for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramic or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERV ...

Auction-ID: A1-46981-169

Auction-ID: A1-47154-186

Universal cutting machine with circular knife, d 250 mm

Kitchen slicer, crooked, type KSSM-V 1.4 D

Used machine CNC cutter/plotter cutting surface in X and Y: 3,500 x 2,100 mm Multifunctional CAM cutting system in CNC knife technology for the 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunction tool head The machine is sold with a driven round knife and a punching tool. Mu3Vqs • Multifunction tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with grey conveyor table (conveyor) as standard. Green-blue exchange conveyor possible (offers high contrast for dark materials) Other tools can be expanded (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven round blade • UCT universal knife (drawing knife) • KCT Kiss-Cut Tool  ...

used to cut cabbage heads for sauerkraut production,, diameter of the cutting discs: 800 mm,

Plasma Cutting Machine MB - Welding Technology Type Plasmaprof 50Identical to CEBORA ash. No. 244311 Year of construction approx. 1992Power 50 Amp. = 35 % ED 30 Amp. = 100 % EDEsetting range 2 stagesHose package length approx. 6 metersCompressed air connection 4.7 barMains connection 400 Volt, 50 Hz, 32 Amp. PlugSpace required L x W x H 500 x 350 x 700 mmWeight approx. 80 kgGood condition; used

Plasma cutting machine CLOOS type CPS 40/80Year of construction 1990Power at 60 % ED 80 Amp.Power at 100 % ED 40 Amp.Adjustment range 40 and 80 Amperes (2 steps)Cutting capacity for steel max. 25 mmHose package length 5.5 metersMains connection 400 Volt with 32 Amp. Plug and hand torch CLOOndimension L x W x H 700 x 600 x 750 mmWeight 160 kgGood condition; used

CNC flame cutting machine BACH type ACW 2500Flame cutting machine with CNC control NBS 400Masch. No. 14 561-06 Year of manufacture 2006Cutting area 2500 x 6500 mmRaceway length 8000 mmTrack width 3345 mmHeight of the raceway 650 mm2x Machine cutting torchwith burning table; used

Plasma Cutting Machine, Plasma Cutting Machine MESSER GRIESSHEIM Type Plasmastar HA 95Fabr. No. 4040 Year of construction 1990Power 95 Amp. - 60% ED 45 Amp. - 70 % EDEsetting range 2 stepsCutting capacity 25 mm (clean cut)Separating cut max. 45 mmHand torch PHC 95/140Power connection 380 volts, 50 Hz, 32 Amp. Plug- Water-cooled- 8 meters hose package length- Operating instructionsSpace required L x W x H 900 x 480 x 850 mmWeight 160 kgvery good condition; used

Thread cutting machine, pipe thread cutter -Manufacturer: Rothenberger, Thread cutting machine type Supertronic 2SE without thread cutting head -Pipe size: 1/2 to 2 inches -Spindle bore: Ø 68 mm -Operating voltage: 230 volts -Speed: 40 rpm -Foot switch: with emergency stop function -Equipment: Pipe cutter, internal deburrer -Dimensions: 500/480/H370 mm -Weight: 46.6 kg

Mixed lot of MAPAL WWS tooling system. Includes 1x indexable cutting head and 1x Ø16 MAPAL tool (30320052), along with screws and documentation. Auction-ID: A7-46756-209

Various disc cutting wheels for oblique tempering from Lorenz. Technical details can be seen in the photos. 9 pieces in a set Auction-ID: A1-47017-97

Specifications Brand: IMT Type: CNC Waterjet Cutting Machine Control: CNC control with control console Construction: portal model Cutting technique: water jet Work table available Including: Control panel Monitor/display High-pressure hoses Cutting head Guide rails energy chains Visible features Large flat cutting table High portal for X/Y movement Electronic CNC control Industrial version Put away working. KMT WATERJET SYSTEMS SLV 50 CLSC 1750X1200X1300MM PRESSURE VESSEL WITH FEED TRAY RADLER 2452 YEAR 20081200X1200X2700MM WATER BOWL BAUER EXPO 1200 YEAR OF CONSTRUCTION 2008 1100X1750X1800MM MOTHERCASE 1200X400X1300MM STORAGE CABINET 1000X550X800MM Auction-ID: A1-41998-15

Specifications Brand: IMT Type: CNC Waterjet Cutting Machine Control: CNC control with control console Construction: portal model Cutting technique: water jet Work table available Including: Control panel Monitor/display High-pressure hoses Cutting head Guide rails energy chains Visible features Large flat cutting table High portal for X/Y movement Electronic CNC control Industrial version Put away working. KMT WATERJET SYSTEMS SLV 50 CLSC 1750X1200X1300MM PRESSURE VESSEL WITH FEED TRAY RADLER 2452 YEAR 20081200X1200X2700MM WATER BOWL BAUER EXPO 1200 YEAR OF CONSTRUCTION 2008 1100X1750X1800MM MOTHERCASE 1200X400X1300MM STORAGE CABINET 1000X550X800MM

Straightening and cutting machine rolling from Coil. used test line please ask us for your special offer.

Technical data: Machine stand, Type 539 Band saw roll diameter 1400 mm Band saw roll width 180 mm Saw blade width max. 200 mm Saw blade length max. 9300 mm Saw blade thickness 1.3 mm Saw blade speed approx. 42 m/sec. Drive power 45 kW, (1500rpm) Cutting feed requires. 22.5 m/min -Incl. electrical equipment, consisting of limit switches for saw blade voltage, path limitation for transverse movement -2 electromechanical width adjustment devices with precision spindle and two-stage special drive - designed for connecting a Fraba digitizer 2800 -2 hydro-pneumatic band saw roller brakes

Thread cutting power M 2 - M8 Speed: 700 rpm, luf requirement: 750 l/min, pressure 6 - 7 bar, working range extension: 300 - 1900 mm, Afbau parallel arm: stable arm structure made of hard aluminium profile (38x29) Weight: 23 kg, adapter holder: TCS 1 B - incl. 6 safety slip couplings according to your choice year: 2009

Material: Steel Engine: 15 kW Other data and price on inquiry. You can also get the entire system with all components.

Crosscut and miter saws with maximum cutting height of 200 mm stable grey cast iron construction precise ball bushing guide of the tool slide on hardened and ground steel shafts Manual saw feed fast up to 65 ° horizontal MITRE setting and 60 ° vertical for adjustable fixed stops lower blade guard to extractor can be connected Machine mounted on mobile machine base with 1,5 mtr. long rollers left and right left side with scale and stop position slider Technical data: Engine: 400 V / 5.0 kW Speed: 2800 RPM Cutting length: 420 mm (at 90 °) Cutting height: 200 mm (at 90 °) Miter range horizontal: 45°-90° - 20 ° Miter range vertical: 60° - 90°-30° Saw blade diameter: 520 mm Dust nozzle: 100 mm Weight: 490 kg

Thread cutting capacity: M 3 - M 12 Speed: 400 rpm Air demand: 750 l/min Pressure: 6 - 7 bar Extension: 950 mm Standard accessories: Parallel arm Air motor 6 pcs safety slip couplings of your choice guide column with mounting flange Radial boom Maintenance Pneumatic oil for initial filling

automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2

Weight 1750 kg Length x Width x Height 1800 mm x 1350 mm x 3000 mm Machine data: rotor diameter - knife circle : 500 mm length rotor : 630 mm angular speed rotor : appr. 650 min-1 after-run duration : appr. 60 sec. motor power - depent of order: 37 kW / 1500 min-1 45 kW / 1500 min-1 idle power :appr. 30 - 40 % of nominal power. Very good condition, ready to work. You can also get the entire system with all components.

; operational

AUTOMATIC CUTTING , BORING and MOULDING machine type PADE 1000 N Machine suitable for assembling part of chairs, tables, frames, small furniture, wheelchair frames, etc. The PADE 1000 N performs the operations of Cutting , milling and drilling at the end of the piece, either singularly or differently combined. All movements of the machine are controlled by pneumatic devices. composed by 3 working units : 1- Cutting unit circular saw diam. mm.350 motor power hp 3 2- Boring unit boring head with 5 / 7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 3- Moulding unit vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 pneumatic sliding carriage volt. 380/50

Cutting cutter Kjellberg-Eberle - used Type: SII20 Machine No.: 1331 - 220 V, 50 Hz, 2.5 kVA, IP 31 - on 04.02.1990 a new control system (NS 3003) was installed by Etek - Built in 1974 - 4 burners - Table dimensions: 6m x 2.50m - Total area: 6m x 5.5m x 2.4m In good condition!

very well preserved, fully reconditioned MAZAK laser machines with 1500W Table format: 2500 x 1250 mm minimal footprint by 2, 6 m x 6, 5 m Small part conveyor completely encapsulated engine cover FE: up to 12mm VA: up to 6mm Plastic can incl. software including warranty incl. extraction incl. commissioning + training

Working width: 820 mm rotor flight circle: Ø 720 mm drive: 90 kW cutting system: 8 cutting blades equipment: mechanical adjustment of the cutting gap Machine weight: 3500 kg