We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
123,302 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Description: INVERTER  ,MIG-165 SP with accessories weight approx.: 10 kg, Approx. Onsite Dimension. (l x w x h): 500 x 300 x 300 mm
used
Description: MIG - 140 E , ,with accessories weight approx.: 10 kg, Approx. Onsite Dimension. (l x w x h): 500 x 400 x 400 mm
used
Description: Electronic wire welding machine, mopdello mig 400 -pl weight approx.: 120 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,500 mm
used
Description: INVERTER  ,MIG-165 SP with accessories weight approx.: 10 kg, Approx. Onsite Dimension. (l x w x h): 500 x 300 x 300 mm
used
Description: Serial Number:55DR1663 Max. Workpiece dimensions: 800x600x215 mm Max. Workpiece weight: 500 kg Table dimensions: 640 x 540 mm Travels: X-axis: 400 mm Y-axis: 300 mm Z-axis: 220 mm Table rapid traverse rate: 1300 mm/min Wire diameter: 0,1 to 0,3 mm Max. Wire feed speed: 23 m/min Wire tension: 0,5 to 25 n Taper: OPTOLinear T/C device Taper angle: 15º (with 200mm plate thickness) Working Hours 24073 Dielectric Fluid Reservoir: Working tank volume: 550 litres Filtration flow rate: 50 l/min Water purifier: 10 litres Other features: Superfinishing Rugosity less than Ra 0.2 weight approx.: 2,980 kg, Approx. Onsite Dimension. (l x w x h): 1,910 x 2,702 x 2,015 mm
used
Max.width of cutting: 530 mm Temperature of meat block: up to -20 C Control panel mounted on the machine Instaled power: 4 KW Power supply: 380 V, 50 Hz Dimensions of machines in cm: Width: 100 Lenght: 165 Height: 195 Delivery time: 30 working days after advanced payment
used
Rex hydro cutter 65 liter Outside of machine made of special stainless steel 65-liter bowl 2 mixing speeds 2 bowl speeds – fast and slow Main cover is made of special steel, stainless steel Noise-canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 135 depth: 90 height: 130 Main motor power: 18 kW Voltage: 400 V, 50 Hz Delivery time: 10 working days after advanced payment
used
used
REF-1059 CHOP CUTTER CRM NEXUS 220 Manufacturer: CRM (COSTRUZIONI-REVISIONI-MECCANICHE) Model: Nexus 220 Year: 2003 Entirely built in stainless steel Power: 4kW 220/380V, 50Hz. Three-phase Inner dimensions: - Max. piece length: 900mm - Max. piece height: 260mm - Max. piece width: 220mm Outside dimensions: Length 2,130mm, width 800mm, height 1,200mm
used
WOHLENBERG 115 PAPER CUTTER Manufacturer: Wohlenberg Type: 115 Year of production: 2001 Max. Paper size: 115 cm Available immediately
used
General SKU391T1169 LocationBarneveld Make(unknown: missing typeplate) Main Features MaterialStainless steel Volume23 Ltr. Motor2.2 KW Specified Features - Cutter Cuttercheck Bowl cuttercheck Capacitymax. ± 23 Ltr. Diameter360 mm Depth230 mm With scrapercheck Inletdia. 210 mm Outlet290x120 mm Motor2,2 kW Speedscrapers: ± 141-142,5 mm, dicers: ± 564-570 rpm, slicers: ± 846-855 rpm MaterialAluminum bronze, Stainless steel 1.4301 (304) Information Mounted on framecheck With switchcheck Floorspace1,0x1,3 m Total height1,53 m Weight560 kg Extra Specificationswith extra rotor and knifesCutters-Mills > CuttersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in B ...
used
General SKU354T1001 LocationBarneveld MakeUrschel TypeGK No.2017 Year of construction1983 Main Features MaterialStainless steel Motor1.5 KW Specified Features - Cutter Cuttercheck Continuous cuttercheck Number of knife blades8-25 With scrapercheck Inlet460x250 mm Outlet180x Motor1,5 kW With variable speed drivecheck MaterialStainless steel Information Mounted on framecheck With switchcheck Weight470 kg Floorspace1,87x1,17 m Total height1,2 m Extra SpecificationsTYPES OF CUTS: SLICES: 1.6 to 19.1 mm DICES: A slicing knife, crosscut knife spindle and circular knife spindle are used for dicing. Changing the size of the cubes is done by using the required cutting spindles and adjusting the slice thickness. :Slice thickness: 3.2 to 19.1 mm :Crosscut knives: 7.1 to 22.2 mm :Circular knives: 2.4 to 76 mm STRIP CUTS: To make strip cuts, only the slicing knife a ...
used
General SKU094Y625 LocationBarneveld MakeCondux TypeHR9/N3 No.92 Year of construction1988 Main Features MaterialStainless steel Motor13 KW Specified Features - Cutter MaterialStainless steel Cutters GrinderSlicer/chipper (1x) Rotor sizedia. 900mm Inlet480x160mm, Outlet 700x250mm Motor± 13,0 KW Information Floorspace1,3x1,2 M Total height1,8 MCuttersConduxMills > CuttersBrand > Condux What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
General SKU010H020 LocationBarneveld MakeUrschel Laboratories Inc. Valparaiso USA TypeComitrol MG-1700 No.1512 Year of constructionunknown Main Features MaterialStainless steel Motor22 KW Specified Features - Cutter MaterialStainless steel CutterComitrol processor Knife diameterdia. 150mm With hoppercheck Inletdia. 300mm Motor22,0 KW, 380 Volt Information Mounted on framecheck Floorspace1,3x0,6 M Total height2,0 M Weight380 KGCuttersUrschel UsaMills > CuttersBrand > Urschel Usa What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
General SKU010H018 LocationBarneveld MakeUrschel Laboratories Inc. Valparaiso USA TypeMG-1700 No.1173 Year of constructionunknown Main Features MaterialStainless steel Motor22 KW Specified Features - Cutter MaterialStainless steel CutterComitrol processor Knife diameterdia. 150mm Inlet150 Motor22,0 KW, 380 Volt Information Mounted on framecheck Floorspace1,3x0,6 M Total height2,0 M Weight380 KGCuttersUrschel UsaMills > CuttersBrand > Urschel Usa What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
General SKU004Y068 LocationBarneveld MakeAlexanderwerk TypeGKM No.21313 Year of constructionunknown Main Features MaterialStainless steel Motor1.3 KW Specified Features - Vegetable cutter MaterialAluminium, Stainless steel Vegetable cutter/Planetary mixer (1x) With motor1,1/1,3 KW, 380 Volt With hoppercheck Information Mounted on legscheck Mounted on wheelscheck With switchcheck Extra Specifications- With Schneidaufsatz - With Zweikammeraufsatz - With Planeten-Rühr- und Schlagmaschine type PMA-20 Vegetable cuttersAlexanderwerkMills > Vegetable cuttersBrand > Alexanderwerk What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
General SKU424U1350 LocationBarneveld MakeUrschel TypeComitrol 1700 Main Features MaterialStainless steel Motor30 KW Specified Features - Cutter Continuous cuttercheck Diameter150 mm Depth9.5 mm Knife diameter150 mm Number of knife blades9 With hoppercheck Inletdia 90 mm Outletcheck Motor30 kW (3000 rpm) With variable speed drivecheck Speed6000 rpm MaterialStainless steel 1.4301 (304) Information Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgearcheck Floorspace1,2 x1,2 m Total height1,75 m Weight580 kg Extra Specifications- 3 cutting heads (4.5 mm: 1 mm: 0.5 mm) - 1 micro cut head (1mm) - heads and rotor made out of Stellite (Co alloy) CuttersUrschel UsaMills > CuttersBrand > Urschel Usa What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination ...
R21746/11 HOBEMA Cross cutter Model: 101 A Built: 1969 Working width: 700 mm Availability: by arrangement with collecting cylinder Available: by arrangement
R22352/11 SCHWALBACH Cross cutter Model: BS 650 Built: approx. 1995 Working width: 650 mm Fully automatic Cutting length: 4 - 1000 mm Roll diameter: 300 mm max. Material: Soft and hard foils PVC laminated fabric 0.1 - 1mm Dimensions: 1000 x 600 x 1000mm (W x D x H) Available: by arrangement
used
480 x 320mm; 30,000 c/h; 4 x MID-WS unwinding stations; 4 X ZHF (Siguture systems); SLT station (card glue device); SHT (Gatherer Stitcher Drum); UTR delivery station; UTR-SNT gripper track; UTR SHT Delivery Station; SNT (trimming drum); UTR SNT Transfer Station; UTR-SNT gripper track carry unit UTR-SNT delivery station; missing copy delivery station (UTR); EP station; VP station; HP station ETR insert drum. Opition 2: Mid AWS (relax station); ZF SHT Feeder; UTR gripper track on 4X RAB insert feeder; 4 x VSS stations; Gripper to follow TO VP station-to ETR insert drum Still in operation: No Verf Gbar: Immediately
used
VHM shank cutter from Garant (20 3160 - 20) lightly used, DIN 6527, type N, D= 20 mm number of teeth - 8, ask also for other quantities from the cutters. Price for 10 pieces 240,-€ for 1 piece 25,- €
used
pneumatic Bale cutter max. Width 550 mm max. Length 800 mm Blade stroke 280 mm
used
The Velati F4 continuous meat cutter, made entirely from stainless steel, has been designed to transform a block of meat into meat pieces, using a blade system specially devised to avoid damaging or crushing the meat. A combined blade structure, consisting of an oscillating guillotine blade and circular saw blades, allows the meat to be processed at various temperatures and cuts both the lean and fat meat. The machine can produce up to 8-10 tons per hour. Velati meat cutter is driven by a conveyor, whose speed can be adjusted via a variator, allowing both the hourly production rate and the thickness of the cut pieces to be controlled. Velati meat cutter is equipped with inverter which regulate the feed belts. The F4 models is equipped with touch-screen control and PLC which can configure and store the different work programmes. The machine is also fitted with a safety system that is cont ...
used
1. CUTTER HAED WITH KNIVES FOR KRÄMER + GREBE - K+G WETTER SA 120 2. CUTTER HAED NO KNIVES FOR KRÄMER + GREBE - K+G WETTER SA 120 Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36
used
Manufacturer: MAN GHH Power supply: 400 V / 50 Hz Power capacity: 500 kg Lifter for cutter trolleys 200 L Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36
<br><br><br>Still in operation: Yes<br>Available: immediately
used
ROUTER type COSMEC 1000 second hand machine volt. 380 / 50 max. working mm. 1000
used
; ready
used
used
used
used
used
Seydelmann K 90 DC-8, 90 liters bowl cutter, all stainless steel, variable knife speed, 2 bowl speeds, variable mixing speeds forwards and reverse, knife shaft brake electrically operated, noise reduction cover, loading device, unloader, in very good condition. The machine is immediatley available and can be tested in our facility in Koblenz, Germany.
used
used
used
Scissors: for flat steel: 80 x 10 mm Shear: For L & t 90 / 45 ° 70 x 70 x 7/50 x 50 x 6 mm Rod steel scissors around until: 28 mm square up: 25 mm Notching device for material thickness up to: 7 mm Drive motor: 380 V, 1.3 kW Weight: 400 kg Space: 1000 x 650 x 1480 mm
used
Producer: Wolfking Description: Microcutter Wolfking E 160 MAN -Total power 55 KW -Output 6000 kg/h - machine without pump
used
Type: FPS 40 Capacity 40-60 szt./min Weighting range 11-700 g Width 650 mm Haight 1758 mm Lenght 2876 mm Freqency 400V-3F-50Hz Total power 1,0 kW Air consumption ( 8 bar) 700 l/min Weight 630 kg
new
With step-less variable speed controls for both knife and conveyor speed, the BD75LA is a flexible and dynamic solution to cutting leafy salads, herbs, long bodied vegetables and fruits. Able to output material at thicknesses anywhere between 1 and 15mm, this machine boasts an impressive versatility. An with an output of 250 kg. per hour — the BD75LA is capable of meeting high throughput demands with exceptional reliability. Technical Details Capacity/ Hour: 250 kg. Speed: Variable Output Thickness: 1-15 mm Dimensions: 100 x 74 x 125 cm Power: 0.8 kW Key Features ? Hygienic, heavy-duty design ? Adjustable thickness of 1-15mm ? Continuous feed conveyor belt ? Stepless variable speed controls ? Easy installation ? Single phase power ? Stainless steel chassis ? Stainless steel blades
used
Cardboard scissors Biagosch & Brandau Manufacturer Biagosch & Brandau, Hamburg Cutting width: 105 cm Table width: 110 cm Table depth: 60 cm Table height: 84 cm With pull-out tray for clippings
used
Producer: INOTEC Type: WT97-RNSV Power: 2,5 kW Weight: approx. 400 kg Length x width x height: 998 x 850 x 1740 mm Sausage cutter INOTEC type WT 97 - RNSV , directly from the customer - Caliber from 17 to 46 mm - Adjustable speed of 0.25 m/s up to 0.8 m/s Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36
used
Treif Husky CE dual purpose cutting machine, precise dicing and cutting with one machine, automatic start-up device, cut dices, strips, slices and portions. The machine is currently in the refurbishment and you are very welcome to test the machine at our office in Koblenz, Germany.
used
Knife for cutter LASKA type K-200 Request a quote iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biała USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36
used
Ruhle Dicer SR 2 Turbo, loading device for euro boxes, discharge-conveyor belt, touch PC control,different grid sets, cutting temperature: from -5°C to +80°C, capacity: max. 3000 kg/h. The machine is currently in the refurbishment and will be available soon. You are welcome to test it in Koblenz, Germany.
used
Rühle SR 1 dicer, performance 0,8t/h, grid set variable adjustable, 1 cutting knife. The machine is immediately available and can be tested in Koblenz, Germany.
used
Producer: Bizerba Type: S-110 Connection: 230 V Steaker and strip cutter BIZERBA type S-110 -40 round knife -Blade spacing 4 mm Ask for an offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36
used
Stephan MCHD 30-II micro cutter
used
Magurit frozen meat cutter
used
DATA ON THE MACHINE Machine type: Ironing saw Manufacturer: RUCOCO Model: RBS 230 Condition: used Price 575 Euro net plus VAT Location Warstein , Germany Reference M-RUC-1220 Description We offer you a used ironing saw from the manufacturer RUCOCO incl. 6 spare saw blades (also for stainless steel) Coolant plant Our offer is aimed at professionals who are covered in accordance with section 14 GewO in accordance with the trade order. The offer is subject to change, intermediate sale reserved. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are reserved!
used
Manufacturer: Neolt Model: Electro Power Trim PLUS 250 Year: 2003 equipment: - electric rotary cutter with rotating circular knife - Cutting thickness up to 1.6 mm - Triggering of the cutting process by hand contact strip or foot pedal - Transparent pressure rail with which the material to be cut is held during the cutting process is automatically pressed - Illuminated cutting edge - Collection bag for clippings - Connection: 230 V/ 50 Hz - Dimensions: 2,950 x 500 x 1,050 mm (WxDxH) - Weight: approx. 100 kg Ideal for cutting paper, pop-up and other displays, laminated Printing, banners, tarpaulins and self-adhesive foils. The device works and was used very little. Availability: In stock Defects: none Price: on request