wire cut machine used for sale

Cutting machine HSM type ABW-ROTA-2200 Specifications: • for foils, cork, veneer, etc. • Rotational cross-section • Cutting width max. (mm): 2100 • Heating: included • Cooling: included

cross-section width:: 800 mm cross-section heigth:: 15 mm feed:: ab ca. 5 mm speed of feed:: m/min cuts max.:: Schnitte/m condition: used, overhauled Specification: Panel cutting machine - overhauled with CE - Section width max.approx.: 800 mm - Section height max.: 15 mm, depending on the hardness of the rubber sheets - Cutting length from approx.: 5 mm (depending on material) - cutting force approx.: 10 tons - Connected load approx.: 1.8 kW - Painting: green - Operating voltage: 3 x 400V, 50Hz, N, PE - Dimensions approx.: 1,200 x 1,450 x 1,950 mm - Safety devices according to current standards, - New on-board system machine, - New control cabinet with PLC system Siemens S7-1200, - CE marking, - Instructions for use and maintenance in English or German language The data for this ad was created with ModulMWS - the s ...

Cutting machine Paper cutting machine Polar 58EM Year of construction: 1991 Very good condition!

M. No.: 7061504 Format (cm): 78 Equipment / Additional information: Side table, air table, 1x reserve knife

ECKERT JANTAR 2 plasma cutting machine was manufactured in Poland in 2010. The machine with a reliable plasma torch and a large work table with a length of 3000 mm and a width of 1500 mm guarantees its user excellent precision in the machining of thin and thick metal sheets, as well as ensures a high degree of operational safety and long-term failure-free operation. The contamination generated during the process is effectively eliminated by the extraction table, covering the entire working area of the machine. The ECKERT plasma cutting machine is also equipped with a powerful HYPERTHERM HPR130XD plasma source with a power of 130 A and a modern CNC ECS 872 controller. Technical data of the ECKERT JANTAR 2 plasma cutting machine - CNC control: ECS 872 - work table area (L x W): 3000 x 1500 mm - work area (L x W): 3000 x 2000 mm - plasma source: HYPERTHERM HPR130XD - extraction tabl ...

Key data: 3000 mm, 1500 mm, 6000 W

3000 x 1500mm Dynamic Edition

Ref. -No.: 10371 Manufacturer: LVD Year of construction: 2013 Type of control: CNC Control: 31ilb Storage location: Halberstadt Country of origin: Belgien Structural steel: 15 mm stainless steel: 8 mm aluminum: 6 mm Laser source: Co2 - 4KW Edit size: 6000 x 2000 mm changing table: Yes tension: 50 Hz - 400 Volt Serial no.:: 348XX Operating hours: 31280 H Electrical connection: IEC X-Axis: 6200 mm Y-Axis: 2100 mm Max capacity: 4 kN Max. weight: 25055 KG Dan Performance: 75 kW Machine type: 62-21 cutting head: LM2000 NC Focus Process control: LM2500 Capacitive sensor: LM2301 EG8030 Further information: Last maintenance incl. new PC in 04/2023

Ref. -No.: 10368 Manufacturer: BYSTRONIC Year of construction: 2011 Type of control: CNC Control: Bystronic ByVision Storage location: Halberstadt - Germany Country of origin: Schweiz Manufacturer: BYSTRONIC Laser medium: CO² Kohlenstoffdioxid wavelength: 10600 Nm Maximum power: 6000 Cw Workspace X: 3048 mm Work area Y: 1524 mm Stroke Z axis: 100 mm Positional deviation Pa: +/- 0.1 mm/m Position spread Ps: +/- 0,05 mm Positioning in axis-parallel X and Y maximum: 120 m / min Positioning simultaneously X/Y maximum: 169 m / min Axis acceleration X/Y maximum: 30 m/s^2 table load capacity: 890 kg table change time: 25 s

Fiber Tube Laser with Automatic Wire Feed FLV-TA-6024 3kW Technical Parameters - Maximum profile height: 240 mm - Maximum profile length: 6000 mm - X- and Y-axis positioning accuracy: ± 0.05 mm/m - Repeatable positioning accuracy of X and Y axis: ±0.03 mm - Maximum Acceleration: 0.0G - Power: 3.0 kW - Source brand: Raycus or MAX Photonics to choose from - Power supply: ~3x400 V 50 Hz - Protection class: IP54 Depth: - Steel S235: recommended depth 20.0 mm, maximum depth 22.0 mm - Stainless steel: recommended depth 8.0 mm, maximum depth 10.0 mm - Aluminum: recommended depth 6.0 mm, maximum depth 8.0 mm - Brass: recommended depth 5.0 mm, maximum depth 6.0 mm Construction The machine is very stable thanks to the welded construction. High-speed movement of the head with high precision is ensured by Japanese Fuji servo drives. Automatic lubrication system for axle ...

Offer via gebr. overhauled pipe cutting and chamfering machine Fabr. Georg Fischer / Orbitalum Type RA8 Year of construction 2007 Specifications: Tube Outer Diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 150 - 270 rpm. Electronic speed levels 1 - 6 Power 1600 W incl. mounting plate, assembly table used, in good condition.

6000w TruDisc 3000 x 1500mm Big specification

4000 x 2000mm 10KW Fiber laser / 10,000w Fiber laser

WaterJet KIMLA STREAMCUT 3116 build in 2017 in Poland, uses innovative waterjet cutting technology for machining among others steel, plastics and glass. Workpieces with a maximum thickness of 200 mm are cut on an easily accessible working area by the 3D head, programmed in the intuitive KIMLA software with many useful functions. The use of state-of-the-art technology combined with reliable components and a sturdy design guarantee the achievement of clean and precise edges along the entire length of the workpiece, regardless the type of machined material. During its use, the KIMLA 3116 water cutting machine was used to cut rubber using only water and underwent regular maintenance. The total weight of the machine is 2500 kg. Technical specifications of the KIMLA STREAMCUT 3116 water cutting machine - machinable materials: steel, stone, glass, plastics, tiles, etc. - work area dime ...

WEINIG Rondamat R 934 Machine for manual profile knife grinding / regrinding profile knife Sharpening of straight knives in the planer head – according to a template Tool flight circle min. 100 mm / max. 300 mm Tool width max. 240 mm Grinding wheel diameter min. 150 mm / max. 225 mm Grinding wheel bore 60 mm Mandrel D=40 mm Grinding wheel width – ceramic 5 mm Borazon 10 mm Grinding wheel output 1.1 kW Spindle speed, infinitely variable 500 – 3,000 rpm. Clearance Angle – Radial (Back) 10 – 30 degrees Axial (lateral) 0 – 20 degrees Axial for planer heads 60 degrees Coolant tank approx. 50 litres Electrical connection approx. 1.5 KW Operating voltage 380 V / 50 Hz Machine complete with accessories Machine technically and optically in good condition – fully functional Packing: On pallet Payment: Net cash register be ...

WEINIG Rondamat R 934 S/N 934-733, YOC 1996 Machine for manual profile knife grinding / regrinding profile knife Sharpening of straight knives in the planer head – according to a template Tool flight circle min. 100 mm / max. 300 mm Tool width max. 240 mm Grinding wheel diameter min. 150 mm / max. 225 mm Grinding wheel bore 60 mm Mandrel D=40 mm Grinding wheel width – ceramic 5 mm Borazon 10 mm Grinding wheel output 1.1 kW Spindle speed, infinitely variable 500 – 3,000 rpm. Clearance Angle – Radial (Back) 10 – 30 degrees Axial (lateral) 0 – 20 degrees Axial for planer heads 60 degrees Coolant tank approx. 50 litres Electrical connection approx. 1.5 KW Operating voltage 380 V / 50 Hz Machine complete with accessories Machine technically and optically in good condition – fully functional Packing: On pallet Payment ...

ECKERT JANTAR 2 plasma cutting machine was built in Poland in 2008. The 14 metre long and 4 metre wide stable frame of the machine allows for efficient cutting of large-size details while maintaining excellent precision and quality of processing. In order to ensure a high level of comfort and safety, the work table is equipped with ventilation and an extraction system for exhaust fumes into tanks and feed bags, which effectively eliminates the dust generated during cutting. The JANTAR 2 plasma cutting machine can be expanded with other elements, such as devices for cutting and processing steel pipes or welding thin metal sheets using the piezoelectric method, giving the possibility of adapting the machine to the individual needs of a production facility. In addition, the machine comes with extensive equipment, including an easy-to-use ECKERT CNC controller and FastCAM software with a  ...

Key data: 3000 W, 1500 , 6000

New fiber lasers of the HLB series - Optimised equipment with an eye on the essentials – low acquisition costs despite high-quality components. 6kW resonator, Raycus cutting head guarantee high-quality, competitive laser cutting with minimal maintenance costs EQUIPMENT: Cutting Head: Raycus - Auto Focus MAX Photonics Resonator 6KW (12kW optional) Automatic changeover table incl. light barriers Suction Welldone CE certified CypcutControl Sheet format 3,000mm x 1500mm (4,000 x 2,000 optional) Max sheet thicknesses at 6KW FE 20m VA 15mm ALU 10mm CU 6mm Connected load max. 30kW Footprint approx. 9,000mm x 3,000mm x 2,200mm The machine is included 24 Months Warranty Commissioning Delivery within Germany and Software/operator training offered Gases, electricity, and you're done. In our showroom we have various laser machines from our manufacturers  ...

Automatic Thread Processing Machine Multitapper 1212 CoastOne - Made in Finland Exhibition machine Machining area: 1250x1250mm Thread sizes: M2-M10 Number of spindles: 3 (optionally 4) 2x tapping forming; 1x Sinking Drilling Station Micro-lubrication for each spindle / tool station Control: TC15 touch screen Numerical Input, Import of Punches - NC Files

Manufacturer: TRUMPF Type L 2525 Year of construction 2007 Working area 2,500 x 1,250 x 115 mm Siemens Sinumerik 840D control system Laser power 3,200 watts Accuracy +/- 0.1 mm Equipment: Rotolas Enclosed machine frame PCS Automatic pallet changer Longitudinal conveyor belt for small parts/waste Laser Power Control Siemens control system: open PC-based control, easy operation, online help, diagnostic functions, maintenance hole book, technological data, teleservice Safety: Multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin DIAS Height Control AutoLas Plus automatic focus position adjustment Network connection (RJ45) by installation via teleservice The machine is in good condition. Location Germany, viewing by appointment. Errors in the technical data a ...

Table size 6500x2000 mm Fiber power 6000 W Maintaned

ECKERT JANTAR 2 plasma-gas cutting machine was manufactured in Poland in 2013. The machine designed for even the most intensive and demanding workpiece machining provides excellent cutting precision, high level of safety and trouble-free operation throughout its service life. The sturdy design combined with a powerful and efficient plasma source allows for reliable cutting of workpieces with a maximum thickness of 100 mm (oxygen cutting) or 50 mm (plasma cutting). All process parameters are programmed in the intuitive ECS 872 CNC control with high-end components, which performs the machining cycles fully automatically and minimises the necessity of machine operation by the operator. Technical data of ECKERT JANTAR 2 plasma-gas cutting machine - CNC control: ECS 872 - work table dimensions (L x W): 3000 x 1500 mm - maximum sheet metal thickness (oxygen cutting): 100 mm - maximum sh ...

MOST SPEEDCUT 15/30 plasma-gas cutting machine was built in 2018 in Poland. The machine used for professional production needs, performs precision cutting of metals with a maximum weight of 4 tonnes using a fully automated torch. The torch uses a special system to protect the torch from damage, which combined with the fully galvanised, single-module design of the machine guarantees long and trouble-free operation throughout its lifetime. The SpeedCUT 15/30 CNC cutting machine weighs 1500 kg Technical specifications of MOST SPEEDCUT 15/30 plasma-gas cutting machine - work table dimensions (L x W): 3000 x 1500 mm - travel speed: 25000 mm/min - working speed: up to 10000 mm/min - Z-axis feed range: 110 mm - maximum workpiece weight: 4000 kg - table type: waterbed table (stainless steel tub) - power supply: 230 V; 50 Hz - dimensions (L x W x H): approx. 3600 x 2050 x 1650 mm - we ...

Schneider guillotine shears, steel shears up to 2000mm

PRIMA INDUSTRIE laser cutting system Mod. PLATINUM 1530 - CNC PRIMACH 9000L Year of manufacture 1999 Power 2500W Machine hours 15,000 generator ROFIN-SINAR DC 025 cutting table 1500x3000mm HCF NHT 45 refrigerator equipped with lathe for tube processing automatic pallet changer

EAGLE eVision 1530 F4.0 4kW fiber laser was built in 2016 in Poland. The machine has been maintained and upgraded on an ongoing basis throughout its service life. In 2021, the cutting head and modules in the laser source were replaced. The laser cutting machine is designed for machining sheet metal made of, among others, stainless steel and aluminium. The state-of-the-art 4kW fibre beam cutting technology, combined with a stable work table and a specially designed cutting head, achieves excellent dimensional and shape precision over the entire workpiece area, regardless of the cut material. The low cutting edge and small heat-affected zone additionally ensure that the workpiece geometry is not altered during machining at the edges of the material. The eVision 1530 F4.0 fiber laser is offered with equipment consisting of, among others, an intuitive BECKHOFF CNC controller and a DONALDS ...

SPIRO 6000V4 plasma cutting machine built in 2016 in Switzerland, performs ideally in medium and large industrial plants during the industrial production of parts made of steel sheets and non-ferrous metals. To ensure high cutting performance even during the most intensive machining, the extended work space based on a stable design allows simultaneous cutting and unloading of finished products without interrupting machine operation. The SPIRO CUTLASS 6000 plasma cutting machine is operated using the high-speed SIEMENS with a complete library of parametric models and shapes. Technical specifications of the SPIRO 6000V4 plasma cutting machine - work table area (L x W): 6000 x 1500 mm - maximum workpiece thickness (galvanised steel): 6 mm - maximum workpiece thickness (black steel): 6 mm - maximum workpiece thickness (stainless steel): 6 mm - maximum workpiece thickness (aluminium): ...

cross-section width:: Schläuche max. 11 mm cross-section heigth:: 11 mm feed:: 0,5 - 100.000 mm Condition: used, very good condition Specification: universal cutting machine with roller drive for hoses - small cutting machine for hoses - feed unit: roller drive - microcontroller control: 80537 - cutting unit: pneumatic - Type of cut: Blade cut - Industrial blade: for PVC hoses - Max. hose diameter: 11 mm - Maintenance unit: yes - Max. feed speed: 1 - 50 m/min - Cutting capacity max.: 450 cuts/min depending on the cutting length - Cutting force approx.: 500 N at 6 bar - Cutting length: 0.5 - 100,000 mm - Resolution/step change: 0.5 mm - Operating voltage: 230V, 50-60 Hz - Compressed air: 5 - 6 bar - Air consumption per stroke approx.: 0.2 l/stroke at 6 bar - Paint finish: RAL 7035 light grey - No docum ...

For sale is: 1 Piece Used Plasma Flame Cutting Machine Manufacturer: Oxy2000 Mai Year: 2005 Weight: 5.000Kg Table: 2,000 x 3,000mm Power Source: Hypertherm plasma cutting system Max. cutting capacity Structural steel: 38mm stainless steel: 25 Aluminum: 25mm If required, we also have a Kemper extraction system on offer. However, this is not part of the offer. Machine can be viewed in our warehouse in 09599 Freiberg.

Inv. Num. : 7253 Type: MSF 9001.25Lr T500 Producer: Microstep Created: 2015, GO 2022 Parameters: Laser power: 10 kW Work table length: 9000 mm Work table width: 2500 mm Maximum sheet thickness when cutting (stainless steel): 25 mm Source: nLight CORONA-CFX-10000 Positioning speed: 130 m/min Laser head: Thermacut EX-TRABEAM-Pro-360 Machine height: 2570 mm Machine length: 23000 mm Machine width: 6000 mm Equipment: Technical Documentation Point Laser Sight Camera in the head Protective glass against lens contamination Remote support Adaptive Cutting Automatic alignment of sheet rotation LED Control Panel Automatic nozzle cleaning Calibration station Pallet Table Changer 2 Tables Intake segments under the grate 1x socket Automatic chip conveyor Automatic suction 2x Asper Licenses

Paper Cutting Machine EBA 551-06 LT Year of manufacture 2009 Price 4800 Euro FCA Essen

Replacement knife Tool

Paper cutting machine Polar 76 EM, machine number 6461156, year of manufacture 1994, program control, air table, 1 spare blade, in good condition, immediately available We have another Polar 76 EM in stock. Please send us an inquiry. If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

FINN POWER combined laser Mod. LPE5 CO2 laser power 2500 W Turret 20 stations including 1D index-1D index/forming. 2B index-1B index/forming. 8B normal. 1C index-1C index/forming-2C normal.1MT6-A. 1MT24-8 Working field 3000x1500 Year 2004 Rofin DC025

SECOND-HAND END-CUT OFF BORING AND MILLING MACHINE BACCI MOD. TTF1 - CE RULES - volt. 380/50 - S/N 333 - year 1995

Inv. Num. : 7383 Type: AquaCut 3001.20WB Producer: MicroStep Created: 2016 Parameters: Control System: iMSNC Duty cycle: 35712 h Hours: 20646 h Work table length: 3000 mm Work table width: 2000 mm Equipment: Cutting head Drilling spindle

Paper cutting machine Polar 92 EM-MON, air table, light barriers, program control, machine number 5811013, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Inv. Num. : 6144 Type: Scorpion 2000 Producer: Pierce Created: 2004 Parameters: Work table length: 3000 mm Work table width: 1500 mm Minimum sheet thickness: 2 mm Maximum sheet thickness when cutting: 15 mm Equipment: Source: Hypertherm 1650 Vacuum New Burner PC board replacement. According to GO.

HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 - Range of working diameter: 6 - 18 mm - Capacity: about 7,500 - 15,000 dowels/hour

Inv. Num. : 6599 Type: MG 12001 25PrP Producer: Microstep Created: 2007 Parameters: Plasma source: 2x Fine Focus 800 (300 A) Portal width: 2500 mm Equipment: 3 burners Cable Automatic controller Cooling unit Incidentals

Inv. Num. : 4249 Type: CF 1500/PS Producer: BALLIU Created: 2004 Parameters: Control system: SIEMENS 840D Operating hours: 78000 h Laser power: 3.5 kW Work table length: 3000 mm Work table width: 1500 mm Feed length X-axis: 3000 mm Maximum sheet thickness (stainless steel): 8 mm Feed length Y-axis: 1500 mm Feed length Z-axis: 115 mm Maximum sheet thickness (mild steel): 18 mm Resonator: ROFIN-SINAR DC 035 Resonator has been completely overhauled

SPECIFICATIONS: Cross-cut saws - saw blade diameter: mm 250 Milling unit - shank diameter: mm 35 Height of trunnion cutting shaft: mm 150 Manual guide carriage with 2 tilting guide rails

Plasma Flour Useful Size 6000 x 2500 Hypertherm HPR 130 Plasma Source Cutting steel from 1.5 mm to 30 mm Stainless steel cutting from 1.5 mm to 20 mm Complete cartridge fume extractor system Visible machine in operation.

Automatic tapping machine Multitapper 1212 CoastOne - Made in Finland Demonstration machine Machining area: 1250x1250mm Thread sizes: M2-M10 Number of spindles: 3 (optionally 4) 2x tapping forming; 1x Sinking Drilling Station Micro-lubrication for each spindle / tool station Control: TC15 touch screen Numerical Input, Import of Punches - NC Files

Travel (X/YZ): 3,048 x 1,524 x 150 mm, Cutting head with 5 ́ / 7.5 ́ and 9 ́ lens, sheet metal detection, Laser CV5000 Pallet changer Fabr. Prima Power/OMS Sordella, max. 3,300 kg Extraction system, Fabr. Donaldson, Type 2DFP4-SPRK, 2,400 m³/h, Refrigeration system, Fabr. Hyfra, type sigma 67-S Control Prima Power NC Expressw e³ Laser Classic, YOC 2018,

Plasma cutting machine MESSER Metalmaster Year of manufacture: 2005/2018(Retrofit) Cutting area: 1,500 x 6,000 mm Plasma Power Source: Hypertherm HPR 130 Accessories: extra slag trays

Side table for guillotine

Key data: 3000 W, 1500 , 3000

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OT-6022 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 3.0kW - Energy requirements: 24.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts  ...

STM MasterCut WaterJet manufactured in 2017 in Austria, is an extremely powerful machine designed for machining a wide variety of workpieces. The innovative jet cutting technology used in the process, combined with high-end components, enables incredible cutting quality and precision. The easily accessible, almost indestructible design with a large working area additionally maintains a high degree of stability, even under the heaviest loads. The STM WS3020 water cutting machine has a comprehensive range of equipment, including CAD/CAM software with the very useful AUTO NESTING function, a 37 kW high-pressure pump and a water treatment unit. During its use, the machine has worked for just 800 h and has been serviced on an ongoing basis. Technical specifications of the STM MasterCut water cutting machine - work area (L x W): 3000 x 2000 mm - maximum feed speed: 15 m/min - Z axis r ...

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-T-6012 1,5kW Specifications - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum acceleration: 0.0G - Nominal power: 1.5kW - Energy requirements: 24.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of  ...

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-T-6022 3kW Specifications - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum acceleration: 0.0G - Nominal power: 3.0kW - Energy requirements: 24.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head mov ...