wire cut machine used for sale

Cutter Seydelmann K60U, 60-litre bowl, Machine completely in stainless steel, 2 speeds, mixing passes, with 6mm cutter head, spare knife, cutter head wrench, Connection 400V, 22kW, dimensions LxWxH approx. 125x100x128cm, weight approx. 790kg, good used condition, fully functional

Kilia TK20 Table Cutter 20 litre solid stainless steel bowl 2 courses 6 mm cutter head Spare blade set and fork locks included 400V Stainless steel housing smooth and smooth running, video of test run available comes from a gastronomic business in which meat loaf was made with it

Stephan UM/SK 60 E Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. Mounted on a stainless steel frame. The bowl is equiped with a double jacket for heating/cooling on the jacket, 2x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor inside the product, cutting blade, maximum working pressure in the bowl -1/- bar (protected with overpressure valve), maximum temperature in the bowl 95 °C, maximum temperature in the jacket 95 °C, vacuum connection on the bowl, dearation connection on the bowl, infeed connection on the lid with a hopper with a pneumatic valve for adding powders, mounted on the lid a scraper agitator for the wall, electric driven (0,37 kW - n2: 39 rpm), 1 manual tightening clamp, pneumatic outfeed valve for the product, so not needed to tilt the bowl  ...

Stephan Combicut TK 850 Mixer / Universal Machine for the production of bakery products, convenience products, vegan spreads and confectionery. Previously used in the chocolate production. Machine frame, bowl with slides, lid and side covers are all made of stainless steel. The bowl is equiped with a single jacket, 3x twin cutting blades, overpressure valve, bowl volume: 870 liter, hydraulic slide gate infeed and a valve connection infeed on the top for main product, at the bottom a hydraulic slide gate discharge for outfeed of the ready product (hydraulic controlled), 3x connections for pneumatic controlled ingredient valves on one side of the bowl (including 2x pneumatic valves) and 1x connection for pneumatic controlled ingredient valve on the other side of the bowl (including 1x pneumatic valve). Single jacketed lid with scraper of the wall (electric driven ± 25 rpm), 3x manual tigh ...

Spare parts for different Stephan UMM/SK - TC/SK Universal machines. The lot of spare parts is existing out of:, - 4x Springs., - Several steam injection nozzles and components., - Temperature indicator., - Knife nut., - Several scraper blades., - Gummies., - 9x Used Stephan 80 knifes., - 2 New Stephan 80 knifes., - 2x Used Stephan 25 or 40 knifes., - 4x Manual clamps for fixing the lid., - Vacuum chamber., - Filler bushings Stephan TC/SK 600., - Part of a pneumatic outfeed valve., - 4x Sieve plates., Type of Machine: Universal machine

Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, roller milling cutter, milling cutter, hob cutter, spline shaft hob cutter -Manufacturer: WMW PWS, 17 hob cutters -Hole: Ø 27 mm 4 pieces, Ø 32 mm 7 pieces, Ø 40 mm 6 pieces -Different types: see photos, more pictures can be sent -Price: complete -Dimensions: 400/400/H150 mm -Total weight: 52.5 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter, angle milling cutter, shell angle milling cutter -Cutter head: face milling cutter SK50 with extension -Type: Ø 140 mm -Recording: SK50 -Dimensions: Ø 140 x 335 mm -Weight: 13.1 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter, angle milling cutter, shell angle milling cutter -Cutter head: face milling cutter SK50 -Type: Ø 140 mm -Number of teeth: 12, without indexable inserts -Hole diameter: 40 mm / bolt circle diameter 66 x 14 mm -Dimensions: Ø 173 x 60 mm -Weight: 5.0 kg

Gear cutters, module cutters, hob cutters, tooth form cutters, module milling heads, end mill cutters, roller cutters, milling cutters, hob cutters, splined shaft hob cutters, gear hob cutters, slotted hob cutters, rack cutters -Manufacturer: Fette, Gear Hobbing Cutters, 6 pieces -Type: Mod.4 R1 EW 20° see photos -Hole: Ø 32 mm -Price/Sale: complete -Transport dimensions: 370/190/H110 mm -Total weight: 16 kg

Gear cutter, module cutter, hob cutter, tooth form cutter, module milling head, end mill cutter, roller cutter, milling cutter, hob cutter, splined shaft hob cutter -Diameter: 63 mm -Height: 40 mm -Reach: 22 mm Quantity: 2x milling cutter fixing disc 650.054.06A SPAN. 5° EV4CO Price: complete -Sale: only complete set -Weight: 1.5 kg

Shelf NOT included, it is located in lot 9. Including various tools including: doilies, center drills, various cutters in high-speed steel and MD, various taps, MD end mills, MD hemispherical cutters, MD drills, special tools, various rotary cutters. Documentation NOT included Assorted quantities and types, as shown in the photo. The total availability of individual visible elements is not guaranteed. Auction-ID: A7-45181-19

End mill, end mill, cutter, shell cutter, milling head, angle cutter, shell angle cutter, angle end mill, prism cutter -Angle milling cutters: Attachment angle milling cutters, prism milling cutters -Type: Ø85 x 35 mm -Hole: Ø 27 mm -Quantity: 1x milling cutter available -Dimensions: Ø 85 x 35 mm -Weight: 0.8 kg

Gear cutters, module cutters, hob cutters, tooth form cutters, module milling heads, end mill cutters, roller cutters, milling cutters, hob cutters, splined shaft hob cutters, gear hob cutters, slotted hob cutters, rack cutters -Manufacturer: Reinecker, hob cutters, 2 pieces -Type: Ø 70 mm / Ø 67 mm KHSS-E -Hole: Ø 27 mm -Price/Fee: complete -Transport dimensions: 135/70/H70 mm -Weight: 2.1 kg

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...

Kettenstemmer GF L x W x H: 120 x 70 x 270 cm Weight 570 kg Baeqvhtqms Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Combi with 11.1.073 Novopac Shrink tunnel Remaining: 3 parts Chassis number: 4395905 Weight: 1,0 tons Power: 4 kW Air pressure: 7 bar L x w x h first part: 2600 x 1700 x 2000 L x w x h second part: 3200 x 2400 x 1700 L x w x h third part: 1775 x 3300 x 1500 Working height: 85 cm. Transport size L x W x H: 2,6 x 1,7 x 2,0 + 3,2 x 2,4 x 1,7 + 1,775 x 3,3 x 1,5 Min.-max. glass thickness: Max 300 mm Min.-max glass size: Max 1460 mm width Condition machine : Repaired after malfunction Control type: Automatic Electric. Connection: 400V Documentation: Available Instructions: Available Electric diagram: Available Parts list: No Remaining: Combi with no. 23073 Photos/film available: Photo's available

The SERVOCUT 602 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machines ...

TECHNICAL DATA: Max oscillation length mm: 100 Max depth of slots mm: 80 Spindle center distance min mm: 84 / max 1170 Spindle rotation rpm: 6.000 / 12.000 Processing: double sided Weight Kg: 2250

TECHNICAL DATA: Clamping height max mm: 1040 Tenoning depth max mm: 150 Slot length max mm: 340 Main motor power HP: 3 Weight Kg: 340

Offer via gebr. refurbished - pipe cutting and chamfing machine Fabr. GF Type RA6 Saw was completely overhauled and tested. - Engine completely new - Gearboxes restored and new seals specifications: Pipe outer diameter 75-183mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed levels electronic 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

Chain resisters L x W x H: 1.2 x 0.8 x 2.2 m Weight approx. 480 kg Year of construction 1977 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

MUTI chain mortiser and bits model OMS 4MM for locks: • Vertical unit with chain, 3 hp motor • Vertical unit with 2 points, 0.75 hp motor • Horizontal unit with 2 points, 2.5 hp motor • Weight approx. 550 kg • Machine not according to CE standards, for export AVAILABILITY FROM APRIL 2024

Laser cutting machine from our exhibition with 150 watts of laser power Delivery time: immediately available ----- Turn it on and get started ----- ----- machine with only about 50 operating hours ----- ----- Year of construction: March 2022 ----- professional machine ----- - incl. Windows10 PC system / monitor / keyboard / mouse - Manufactures installed cutting and engraving software in German - Coordinated and immediately ready for use - Machine masters very fine engraving as well as precise cutting of thick wood or acrylic glass. - very versatile cutting machine. - Cutting wood up to 20mm thick - Cutting of arcyl glass and many other plastics - cutting fabrics, plastic fleeces, etc. - Cutting rubber mats - Engraving on wood, concrete, stone, many plastics - Production of stamps - Heavy industrial quality - Travel 1300 x 900mm - Drives with hybrid  ...

CAMAM oscillating mortiser with 2 benches mod. MO/2A - 4 spindles -Volt. 380/50 - Matr. 145

BACCI multiple oscillating mortiser mod. MX90 - 5+5 horizontal spindles - 2+2 vertical spindles - Selectable spindle revolutions motor per motor. . laps 1' 6000/12000 - Max. slot inclination 20° - Tilt to and from the outside – standard -7° + 30° - Max. distance between spindles 1280 mm - Matr. 228 - CE standards - Year 1999 - Complete with manual and CE declaration

Oscillating mortiser with 2 benches BALESTRINI mod. 2CAP

automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2

Thread cutting power M 2 - M8 Speed: 700 rpm, luf requirement: 750 l/min, pressure 6 - 7 bar, working range extension: 300 - 1900 mm, Afbau parallel arm: stable arm structure made of hard aluminium profile (38x29) Weight: 23 kg, adapter holder: TCS 1 B - incl. 6 safety slip couplings according to your choice year: 2009

Cutting cutter Kjellberg-Eberle - used Type: SII20 Machine No.: 1331 - 220 V, 50 Hz, 2.5 kVA, IP 31 - on 04.02.1990 a new control system (NS 3003) was installed by Etek - Built in 1974 - 4 burners - Table dimensions: 6m x 2.50m - Total area: 6m x 5.5m x 2.4m In good condition!

very well preserved, fully reconditioned MAZAK laser machines with 1500W Table format: 2500 x 1250 mm minimal footprint by 2, 6 m x 6, 5 m Small part conveyor completely encapsulated engine cover FE: up to 12mm VA: up to 6mm Plastic can incl. software including warranty incl. extraction incl. commissioning + training

AUTOMATIC CUTTING , BORING and MOULDING machine type PADE 1000 N Machine suitable for assembling part of chairs, tables, frames, small furniture, wheelchair frames, etc. The PADE 1000 N performs the operations of Cutting , milling and drilling at the end of the piece, either singularly or differently combined. All movements of the machine are controlled by pneumatic devices. composed by 3 working units : 1- Cutting unit circular saw diam. mm.350 motor power hp 3 2- Boring unit boring head with 5 / 7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 3- Moulding unit vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 pneumatic sliding carriage volt. 380/50

Waterjet 2x3m demonstration plant about 50 hours with comfortable visualized CNC control, and comfortable CAD connection. Cutting table made of stainless steel. The plant is connection, etc. in mint, latest cutting software, AutoCAD Used pumps either Knam/H2O 40HP alternative KMT/Ingersollrand SL4 30hp completely overhauled. New surcharge KMT SL5 classic 50PS/37KW 90.000,00 Construction training & service directly from the manufacturer, including

Waterjet 1x2m demonstration plant about 50 hours with comfortable visualized CNC control, and comfortable CAD connection. Cutting table made of stainless steel. The plant is connection, etc. in mint, latest cutting software, AutoCAD Knam/H2O pump 22 HP. 65.000,00 Construction training & service directly from the manufacturer, including

Bread cutting machine with cutting width adjustment of Wäbama type Circumat.The machine runs without oiling, with round knife and digital control.Suitable to cut breads up to 38cm wide.Right tray is inserted then the loaves are moved by means of sliders to the left Pushed. In the middle between left and right tray the knife rotates and cuts the bread in the desired thick. The cut discs are pushed into the left compartment where they are straightened medium disc holders. After cutting, mam can take out the slices and bag them on the icing rail. Easy operation and cleaning of the machine, little space requirement.Payment and shipping on request. Wabäma Circumat Bread Cutting Machine Circular knife machine Cutting width adjustable Current type three-phase current Operating voltage 400V Control voltage 24 volts Rated current of the machine 1.9 A Insurance in the supply line  ...

Die Cutting Machine Unitec T1060 Die Cutting Machine Unitec T1060 The T1060 automatic machine with or whithout stripping is used to diecutting and creasing paper, cardboard and corrugated and operations for cardboard boxes, paper labels and especially for delicate printing jobs such as cigarette packages, wine, gifts and cosmetics, etc. This machine works automatically throughout its process, with a user-friendly interface to control the cutting speed, number of sheets cut, total operating hours and its working status, as well as to dynamically control the PLC inputs and outputs, and malfunctions to facilitate operation control and troubleshooting. In addition, the machine also features self-testing (e.g., double sheets, missing sheets, accumulated sheets, or fallen sheet detection) and continuous process sampling, while providing you with a solid cutting and accuracy registr ...

Producer: GRAEF Type: EURO 2560 S Power supply: 230V / 50 Hz Power: 0.3 kW Slicer cutting machine GRAEF type EURO 2560 S Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

New machine 24-month warranty Benefits: + TOP value for money + Horizontal cutting machine, ideal for hamburger buns / rolls & cake bottoms + also suitable for cutting /halving baguettes, flatbreads, white breads + Products are guided with conveyor belt to the cutting station + comes with 3 cutting knives, double and triple cutting possible + Adjust cutting height in 5 mm increments + Machine on a robust, mobile frame, with locking wheels + equipped with two safety protective grilles + with upper transport/feeding belt + Tape speed can be controlled by rotary knob, for optimal adjustment of cutting results + with cleaning brushes on the conveyor belt + with quick coupling for belt cleaning + with pull-out collecting plate on the output belt + fast spare parts supply within 1-2 business days Technical data: - max product height: 90 mm - Bandwidth: 405 mm - Band spe ...

Bread cutting machine Rösen & Robbert SPA 38 used sickle knife bread cutting machine with adjustable cutting width for breads up to 38cm long suitable for cutting and halving dark breads.Used bread cutting machine with cutting width adjustment of Rösen & Robbert type SPA 38.The machine runs with oiling, with sickle knife and digital steurung.Geignet to cut breads up to 38cm wide.Right compartment is inserted bread then the bread is inserted to the left. In the middle between left and right compartment, the knife rotates and cuts the bread in the desired thickness. The slices are pushed into the left compartment where they are just selected mid-disc holders. After cutting, mam can take out the slices and bag it on the tray. Easy operation and cleaning of the machine, little space requirement.Payment and shipping on request. Bread cutting machine R&R Type: SPA 38 for loaves up  ...

Index Cutting Machine Hunkeler Model RE32 Year 1975 Capacity up to 8 mm Tool width up to 320 mm Tools 1 straight angle tool with a small radius is included (R=1,5 or R=2mm?) Details machine has undergone a electrical and mechanical modification to ensure a safer working Available direct

used Treif Falcon portion cutter incl. scale and the sorting station, year of construction 2006, portioning to exact weights, 360° scan for bone-in and boneless products, max. infeed length of 820 mm, depending on the product up to 240 portions per minute, the machine is equipped with a smooth curved blade for products without bones, bone-in version optionally available, products up to -3° C. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Creasing/scoring/cutting machine Schöber Model A80 Year 1996 Working width 800 mm feeder can be connected to any sheet feeder or used in-line, we can supply a feeder on request as wel as a delivery belt or jogger Available direct

MAZAK laser cutting machine STX510 MKIII 4kW TOP CONDITION - LIKE NEW - ONLY 700 RUNNING HOURS year: 2012 refurbished, MAZAK lasercutting machine with 2500W table size: 3000mm x 1500mm machine dimension 2,9m x 7,3m chip conveyor LAN / USB connection automatic nozzle change fast piercing in heavy materials piercing sensor plasma sensor for stainless steel cutting burning sensor for mild stelle cutting full covered machine table FE: 22mm VA: 15mm ALMG: 10mm plastics possible to cut incl. software incl. exhauster option: warranty, setup, training option: fully automatic loading/unloading CELL system

Rebuilt 2006 Cutting width-1.850 mm Feeding height 165 mm max Feeding depth 1,850 mm max Front table length 730 mm Table height 900 mm Equipment air table program cutting line indicator 2 knives pile lift PL 3 Jogger Vibro Info: computer modern cut control

TOP STATE - OVERHAUL IN 2016! Year of construction: 2001 2D table format: 2500 x 1250 3D Max processing size: 900 mm x 2150 mm x 300 mm Power: 2000W Control: FANUC incl. cooler incl. 2D programming software + chamfer module + tube/profile module incl. training incl. commissioning incl. quick penetration incl. ball roller table with 3D cutting head incl. CNC tube axle tube and profile up to 160 mm diameter plates, chamfering 3D molded parts, tubes and profiles FE: up to 15mm Oxide-free VA: up to 8mm designed for high pressure cutting up to 20 bar no foundation required! Optional automatic loading and unloading by Mazak FMS48 is available always regularly serviced with warranty / commissioning / training

Vertical Bevel-Cutting Machine Manufacturer: Hyma Model: VSL.A.75 Manually operated roller table with aluminium covered table-too Hand-wheel operated rest-plate with ratchet mechanism for repetitive cutting of same width: 0-130mm Inclinable cutting section with four dynamic balance blade-wheels, each suspended between two adjustable bearings Motorised angle-adjustment for cutting section: +/- 60 degrees. Electric blade drive motor Twister double-edge ground bank knife for cutting in forward and reverse movement of roller table Blade tension control with indication lamp and automatic cut-off on blade slackness and breakage Manually height-adjustable blade guard and fine-adjustable blade guide rollers above and below table Friction grinding apparatus with two adjustable cupstones Electrical control box mounted on table front, adjacent to operator Standard dimensions: Cuttin ...

M. No.: 821301-10002 Equipment / further information: Hardware • OptiPrint™ Media Cleaner • Driven roller feed system with media flanges • Driven reel system with media flanges • Baskets • Rear and front media sensor • Hard disk (2 GB job space) Interface • Control panel with 8 buttons. • 4x20 character liquid crystal display. • English display language. • Metric or English units. Functionality • 16 user configurations. • Automatic alignment system. • Up to eight colors/job • OptiTrac Save Ribbon • Right side of the tape • OptiTrac colors: mirror silver and gold Cut: • Concatenation and curve smoothing to achieve better cutting quality. • OptiCut drag motion optimization. • Overlap for easy weeding. • Multiple reprint function (up to 999). • Flash Eproms With 5 cassettes and various ribbons Operating instructions

Type: Treif Divider Type 2550 Slices are precisely stacked on top of each other even when the stacks are 100mm high The slicer can also be equipped with the automatic shaving function upon request The machine can also accommodate the off-set delivery of products such as cheese Compact and space-saving design ensures optimum utilization of space-saving High degree of flexibility: Product can be changed without mechanically changing the system Special solution: expanded chamber up to 220 mm to accommodate Italian Mortadella for example Dimension of the machine Length: 210 cm Width: 80 cm Height: 210 cm Electrical power: 4.8kW Delivery time: 30 working days after payment