wire cut machine used for sale

Sumbel Machine Package; cleaned and tested; consisting of Sumbel Herold 800 banding machine and Sumbel Regent 800 grating machine. Machine package Sumbel; cleand and checked; gluing machine Sumbel Herold 800 and pressing down machine Sumbel Regent 800.

Planing width mm 260 Dressing table length mm 1040 Max. saw blade diameter mm 250 Saw blade spindle mm 30 Max. saw blade protrusion from the table at 90 mm 75 Max. saw blade protrusion from the table at 45 mm 60 Cutting width at the rip fence (longitudinal cut) mm 500 Milling machine Max. usable spindle length mm 75 Milling machine Max. tool diameter for profiling mm 160 Milling spindle speed rpm 4000/6500 3 motors in V.230 1 PH  

Used Labeling Machine plus capsuling machine GAI 6206CH 001 1200 bph General machine features This Machine integrates efficiently into low and medium capacity bottling lines. GAI manufactured this unit in the year 2012 and configured it to operate at a nominal speed of 1200 bottles per hour. Therefore, this output makes the machine suitable for operations that require flexibility, reliability, and compatibility with various container formats. In addition, its design supports a wide range of production environments. Capsuling unit configuration The capsuling unit rotates in a clockwise direction and uses rotary motion to handle capsule application. Specifically, the machine includes two independent heads. One head applies heat shrink or poly capsules for still wine. The other head applies tin or polylaminate capsules for sparkling wine. As a result, this dual head configuration allows ope ...

TECHNICAL DATA: Processing dimensions: max. 1000 x 300 x 70 mm Horizontal Spindles: 5 + 1 Horizontal drill speed: 4500/9000 rpm Horizontal drill bit holder: Ø 16 mm Saw: Ø 130 mm Installed power: 10 kW

TECHNICAL DATA: 02 Drilling spindles (1 HP each) 01 6-spindle mortising unit (2 HP) 02 Workpiece holding piston

Thimonier THB9200 Vertical Form Fill & Seal Filling Machine (2021) 50-500ml berlingot (pillow-style triangular pouch) Liquids & viscous products (including corrosive detergents) Auction-ID: A1-48805-2

Serta Blow Molding Machine With Moretto hopper loader Auction-ID: A1-48805-74

- Belshaw automatic donut machine - Manufacturer: Belshaw Bros., Inc., USA - Type: MK V-CE - Automatic Donut Frying Machine - Voltage: 380 V - Phase: 3 - Power: approx. 7.9 kW - Frequency: 50 Hz - Used - Condition see pictures

Thimonier THB9200 Vertical Form Fill & Seal Filling Machine (2021) 50-500ml berlingot (pillow-style triangular pouch) Liquids & viscous products (including corrosive detergents) Auction-ID: A1-48805-1

Combination of hot plate welding machine (balti ag) and hot melt adhesive technology pump for PUR hot melt adhesives. With dosing pump and control, suitable for joining and gluing plastic parts (pipes, profiles, plates). Supplied on pallet. Function not tested Weight: approx. 200 kg; Operating voltage: 400 V, 50 Hz; Hot plate welding machine with clamping device and control; Hot melt adhesive technology Pump for PUR hot melt adhesives with control unit Auction-ID: A7-49816-115

B50 - Mech. Bending machine/reinforcing steel bending machine New / Unused Year of construction 2026 -Technical data see data sheet Dimensions LxWxH 1.4x1.3x1.5 meters / Weight 500Kg

Distance between spikes: 600 mm Spike height: 150 mm Maximum Rotation Diameter: About 300mm above the table Universal machine equipped for external and internal grinding Axis operation: Hydraulic and manual longitudinal feed, offering great flexibility of movement Auction-ID: A3-46161-39189

In good condition, machine trasnporter ready for use. The cargo floor just needs to be screwed back on a bit. Technical data see photos. Auction-ID: A3-46160-17391

Delivery head 245cm; transport dollies are NOT included in this lot Auction-ID: A1-48986-18

Power supply: 240V; Power consumption: 0.33 kWh; Sturdy metal construction; Silicone seal for tight closure; Temperature control; Replaceable attachments Auction-ID: A7-50326-77

This is a Pedrazzoli metal band saw machine (band saw), a semi-automatic crosscut saw for metal on a steel base/table with coolant collection. Machine Brand: Pedrazzoli Type: band saw machine / band saw machine for metal (radial arm saw) Version: on its own base with collection tray, electric operation with emergency stop and on/off buttons on the control panel Saw blade (nameplate 1) Saw blade size: SV. 2450 x 27 x 0.9 mm Material: Bimetal Cobalt M42 Tooth pitch (Z): varying according to material thickness, from 8/12 (thin material) to 3/4 (thick cross-sections >100 mm) Lubrication advice drive: oil ISO 460, e.g. Agip Blasia 460 Lubrication advice hydraulics: oil ISO/L/HV type SA-A, e.g. Agip H Lift 46 Cutting speed and tension tables present on the plate (for adjustment per material) Drive motor (nameplate 2 — Siemens) Brand: Siemens Made in: Czech Republic Thermal  ...

Industrial TIG welding machine on trolley, intended for professional welding work in the workshop. Equipped with: TIG welding process Adjustable welding intensity Analog ammeter up to 300 A Multiple welding settings on the front panel TIG torch with cable Welding cables and connections Remote control / pedal Industrial electrical connectors Built-in cooling Rolling mounted mobile chassis Auction-ID: A3-46126-37246

Type: 5343 Working width: 240 mm Steel capacity: up to 1.6 mm Manufacturing number: 150184 Control: manual by handwheel to adjust the pressure/position of the rollers Several interchangeable forming rollers are visible with the machine. Auction-ID: A3-46126-35204

Professional MX chisel mortising machine, designed for carpentry work and the production of mortises and assemblies in wood. Robust construction on metal frame Three-phase power supply 380 V Vertical machining head Manual lowering by large lever Tool-holding chuck Adjustable work table Guide/backgauge Workpiece clamping system Manual depth and positioning adjustment Longitudinal movement of the table On/off controls Emergency stop Heavy base for stability Professional workshop machine Auction-ID: A3-46126-37244

Wire diameter range: 1.5 - 7.0 mm section sections: max. 2,000 mm feed speed: 5 - 120 mter./min. machine has been completely repainted; very good

Travel x 350 mm y 250 mm z 220 mm Water bath machine Automatic wire threading Glass scales x / y incl. box for large coils incl. cooler incl. functional guarantee

Key data: 500 , 350 , 300

Travel X 500 / Y 350 / Z 300, Water bath machine, automatic wire threading, incl. 20 KG option incl. cooler

Wire EDM machine SODICK A 600 manufactured in 1997. Technical parameters of the SODICK A 600 EDM machine: - table travel (X axis): 600 mm - table travel (Y axis): 400 mm - Z axis travel: 270 mm - maximum dimensions of the processed part (width x depth x height): 800 x 550 x 260 mm - maximum weight of the workpiece: 900 - auxiliary table travel (U axis x V axis): 70 x 70 mm - wire diameter: 0.1 ~ 0.3 mm - maximum wire speed: 250 mm / sec. - wire tension: 0.2 ~ 2.8 kgf - cutting inclination at an angle: + -15 degrees per 100 mm of thickness - height from the floor to the surface of the working table: 1000 mm - machine tool dimensions (width x depth x height): 2188 x 2645 x 2100 mm - machine tool weight: 3700 kg

X – Axis Travel (600 mm) Y – Axis Travel (400 mm) Z – Axis Travel (270 mm) U, V Axis Travel (80 x 80 mm) Wire Diameter Range (min ~ max) (0.10 ~ 0.30 mm) Work Tank Dimensions (W x D) (1040 x 780 mm) Maximum Workpiece Weight (850 kg)

Equipment: wire pay-off reel, mechanical flywheel, two wire guide tracks, enclosed straightening and cutting section, mechanical cam, eccentric and lever controls, discharge chute for cut wires, pneumatic service unit and pneumatic lines, retrofitted control panel with digital display, emergency stop button and transparent safety cover. An on-site inspection is possible.

Travel distances: 320 x 250 x 220 mm [ X x Y x Z ] workpiece size X: 780 mm workpiece size Y: 570 mm workpiece size Z: 200 mm workpiece weight: 350 kg with automatic wire threading U/V axis: 80 mm x 80 mm  Cutting in a water bath Conicity: +/- 15° at 120mm

Travel: 350 x 250 x 220 mm [ X x Y x Z ] max. workpiece size Z: 220 mm max. workpiece weight: 450 kg Table size X: 600 mm Table size Y: 400 mm with automatic wire threading U- / V-axis: 80 x 80 mm Cutting in a water bath Conicity angle 20° at height 80mm

Key data: 250 mm, 400 mm, 210 mm

Inv. Num. : 2399 Type: 254Y/FF3 Producer: HITACHI Created: 2004 Parameters: Max. travel length of the X-axis: 250 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 210 mm Feed length in the U-axis ( -): -100 mm Feed length in the V-axis ( -): -100 mm Rapid traverse X/Y/Z: 1500 mm/min Max. workpiece dimensions: 600x400x210 mm Max. workpiece weight: 400 kg

Key data: 320 mm, 220 mm, 180 mm

Inv. Num. : 6869 Type: Robocut 0iA Producer: FANUC Created: 2000 Parameters: Control system: FANUC Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 220 mm Max. travel length of the Z-axis: 180 mm Feed length in the U-axis ( -): 120 mm Feed length in the V-axis ( -): 120 mm Machine weight: 1200 kg

Key data: 400 mm, 300 mm, 250 mm

Type: Wire EDM Machine Ident Number: 22606 Category: Wire EDM Machines / EDM Manufacturer: Sodick Model: SLC 400 G Premium + Year of construction: 2015 Travel: 400 x 300 x 250 mm [ X x Y x Z ] max. workpiece weight: 500 kg U / V axis: 150 x 150 mm Cutting in a water bath Radiator Working tank 850 x 610 mm Taper +/- 25° at tool height 130 mm Control SPW

Key data: 500 mm, 350 mm, 250 mm

Type: Wire EDM Machine Ident Number: 22604 Category: Wire EDM Machines / EDM Manufacturer: Sodick Model: VZ 500 L Year of construction: 2010 Travel: 500 x 350 x 250 mm [ X x Y x Z ] max. workpiece size X: 960 mm max. workpiece size Y: 670 mm max. workpiece size Z: 245 mm max. workpiece weight: 850 kg with automatic wire threading Cutting in a water bath U/V axes +/- 80 x 80 mm Taper 15° at 120 mm height Control LN2W

table length: 500 mm table width: 350 mm ampere: 65 A Control: AGIEVISION 5 CNC total power requirement: 20 kW weight of the machine ca.: 4000 kg dimensions of the machine ca.: m A G I E (Switzerland) CNC - Controlled Wire Cutting EDM Machine Model AGIECUT PROGRESS V 3, Year 2007 Working range, X Y Z (=height) 500 x 350 x 426 mm Wire head, U-V axis (helical/taper cuts) + / - 30 °/ +/- 70 mm Resolution of axes 0.0001 mm Speed for positioning the axes up to 3 m/Min. Tolerances (If machine is new) 4 µ Workpiece dimensions, L x W x H max. 1.050 x 650 x 420 mm Max.weight of workpiece with/w.o. Dieelektricum 400/800 kg Clamping System Universal Beams with fixing holes Cutting wire Ø 0.2 – 0.33 mm Size of wire roll up to 25 kg Cutting speed of wire  ...

HSK63-B,F Test Mandrel Suitable for Vollmer machine types: QWD 750 / QWD 760 / QWD 750 H / QWD 760 H / VPulse 500 and all models from the QXD series (200/250/400)

Key data: 450 mm, 320 mm, 162 mm

For sale Charmilles wire EDM machine type Robofil 4020.1. The machine is in very good condition. Still to be seen under power. Lots of accessories!

For sale is a good used CNC wire EDM machine of the brand Fanuc Robocut Alpha C600iB from November 2016. The EDM machine is immediately available. Prior sale and errors excepted.

Machine with water tank and automatic wire threading, cooling unit and software. XYZ axes 500 x 300 x 210 mm, taper +/- 15° at 100 mm height. Accessories: Dongel & laptop, various spare parts (nozzles, filters, etc.)

EDM machine Gantry Eagle 500 Year 2011 Travel: x/y/z = 525x400x450 Changer: 24 times Weight: 5000 kg

Wire EDM Machine Charmilles Robofil 4030 SI BJ 2001

EDM machine Makino DUO64 vintage 2011.

Key data: 600 mm, 400 mm, 350 mm

For sale Sodick CNC wire EDM machine type ALC 600G. Used CNC wire EDM machine with minimal soot traces. Type ALC600G Premium • With linear motors in X, Y, U and V directions • With Smart Pulse (SP) CNC generator • High-speed wire feeder unit • Smart Linear • Automatic wire feeder in 9 seconds • Triple filtration system •Jumbo 20kg wire roll feeder is standard • Smart control with 19" TFT multi touch screen Technical data machine: Travel X-Y axis: 600 x 400 mm Travel U-V axis: 150 x 150 mm Travel Z-axis: 350 mm Max. workpiece dimensions: 800 x 570 x 310 mm (in a water bath) 800 x 570 x 340 mm (coaxial flushing) Working tank dimensions: 1050 x 710 mm Max. workpiece weight: 1000 kg Distance between floor and top of the table: 995 mm Controlled axes: 5 (X, Y, Z, U, V) Max. positioning speed m/min: 2.0 Wire diameter ø: 0.1–0.3 mm (optionally 0 ...

Wire EDM machine Fanuc alpha IB BJ 2002

A Wafios wire straightening and cutting machine with a straightening attachment of 1000mm is available. Wire diameter range: 1.5mm-7mm, cutting length range: 20mm-3000mm, straightening rotor speed: 6800rpm, pitch: 71/69, cutting stroke: 270/min, machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 1400kg. An on-site inspection is possible.

Wire EDM machine Sodick AQ 537L with few operating hours

AGIE AGIECUT PROGRESS 2 Wire EDM machine Workpiece height: approx. 250 mm Workpiece weight: approx. 400–500 kg Table size: approx. 600 x 400 mm Supply voltage 3 × 400 V, frequency 50 Hz, power 12.1 kVA, rated current 17.5 A, short-circuit current 10 kA. Wire EDM technology, automatic wire feed, hydraulic systems, robust construction. Control panel, emergency stop, sensor monitoring.

EDM machine Sodick AQ 327L BJ 2006 EDM machine Sodick AG 60L BJ 2020

Key data: 320 mm, 220 mm, 255 mm

Inv. Num. : 9242 Type: Alpha-0iC Producer: FANUC Created: 2005 Parameters: Control System: FANUC Series 180-is-WB Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 220 mm Max. travel length of the Z-axis: 255 mm Feed length in U-axis (-): 120 mm Feed length in the V-axis (-): 120 mm Max. workpiece weight: 500 kg Machine weight: 1200 kg

Key data: 600 mm, 400 mm, 310 mm

High-quality FANUC wire EDM machine in top condition. The machine is well-maintained, ready for operation and is suitable for precise wire EDM work in tool, mould and precision machine construction. Manufacturer: FANUC Model: ROBOCUT α-1iD Type: A04B-0320-B001 #E5 Machine No.: P089D1671 Year of manufacture: 09/2008 Control: FANUC Series 310iS-WA Machine Type: CNC Wire EDM Machine X-axis: 600 mm Y-axis: 400 mm Z-axis: 310 mm U-axis: 200 mm V-axis: 200 mm Rapid traverse X: 900 mm/min Rapid traverse Y: 900 mm/min Rapid traverse Z: 900 mm/min Rapid traverse U: 450 mm/min Rapid traverse V: 450 mm/min Max. workpiece weight: 1,000 kg Machine weight: 3,000 kg Mains connection: 200 V AC, 3-phase, 50/60 Hz Connected load: 13 kVA Automatic threading of the wire Processing in a full bath Suitable wire diameter: 0.10-0.30 mm Condition: Top Condition Location: Freiburg

Working range: 1.050 x 650 x 250 mm max. workpiece weight: 400 (800) kg control: Agievision AGIE max. conicity: 30° / 100mm travel -x axis: 500 mm travel -y axis: 350 mm travel -z axis: 426 mm travel U x V-axis: +/-70 / +/-70 mm rapid traverse X-axis: 3 m/min rapid traverse Y-axis: 3 m/min rapid traverse U-axis: 0,6 m/min rapid traverse V-axis: 0,6 m/min rapid traverse Z-axis: 0,6 m/min wire dia.: 0,2...0,33 mm total power requirement: 12,1 kVA weight of the machine ca.: 3,9 t dimensions of the machine ca.: 2,8 x 2,4 x 2,3 m Documents: Wire Eroding Machine AGIE - Agiecut Progress 3 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

movement of X-axis: 500 mm movement of Y-axis: 350 mm vert. movement Z-axis: 256 mm workpiece weight max.: 800 kg weight of the machine ca.: 4.5 t : +/- 70 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AGIE CHARMILLES ROBOFIL 2030 SI ist eine Drahterodiermaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsvermögen: Tisch 560x440 mm; max Werkstück 1130x510x260 mm; Tischbelastung 500 kg; Verfahrwege X 318 mm, Y 218 mm, Z 114 mm; U/V Achsen ±48 mm; Konischschneiden ±30/65°. Technische Daten: Drahtdurchmesser ab 0,1 mm (oberer Wert nicht angegeben); Drahtvorschub bis 15 m/min; max Spulengewicht 16 kg; Abtragsleistung max 300 mm2/min; Dielektrikum 240 L; Leergewicht 4400 kg; Anschluss 3x380 V 50 Hz; Gesamtleistung 12 kVA; Maschinengrösse 3700x2600x2300 mm; Gesamtgewicht ca. 4500 kg. Zubehör: automatische Drahteinfädelung; Aufspannset 3 Stk.; EROWA Palettenwechselsystem 30 Pos.; 3 Werkstückträger. Erreicht enge Toleranzen; typisch für Automotive, Luftfahrt, Uhrenindustrie, Medizintechnik und Werkzeugbau Technische Daten ohne Gewähr