wire cut machine used for sale

Folding machine MB multipli-cas 524 Folding machine MB multipli-cas 524 Serial-No. 78261

I sell a double end cutting and milling machine FRIULMAC IDRAMAT, built in 2007. Working width up to 2500mm Configuration left side / fix: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 KW 1 + 1 pcs. groove saw units front + rear with jump Configuration right side / movable: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 KW 1 pcs. special milling unit on top / 5.5 KW Material pressure band with support from above. Special design, also suitable for side dimensioning. Continuous machine. Siemens Simantic control panel. Condition Very good. Available the same.

Spiral kneader Diosna SP 160 AD - extendable spiral kneader - for a maximum of 160kg of dough or.max 100kg of flour - with 2 timers - Automatic switching on and off via clocks - Stainless steel flour dust cover - 2 speeds (gears) - Boiler locking via pliers operated with hydraulics - suitable for almost all doughs - Vat capacity 260 liters

Wunderschön verarbeitete antike Fadenheftmaschine  Beautifully crafted antique Sewing machine Antike Fadenheftmaschine / Antique Sewing machine Gebr. Brehmer 39 Serial-No. 2742

Falzmaschine / Folding machine Heidelberg TD66/6-4-4 Year 1998 Round Pile Feeder  Folding Type 6 - 4 - 2 buckles Press Delivery

Elektrischer Eckenrunder / Electric Corner Rounder Pescha EK 100 Elektrischer Eckenrunder / Electric Corner Rounder Pescha EK 100 mit 3 Werkzeugen / with 3 Set of Blades Serial-No. 202 076 Geschwindigkeit / Speed max. 50 cycles/min

-extendable spiral kneader Kemper ST 100 A -with 2 automatic timers -with flour dust cover -Boiler right left rotation -Stainless steel spiral and guide rod -with 2 stainless steel boilers -per boiler for max. 100kg flour or for max. 160kg dough -Boiler manual locking

bore capacity in steel (diameter): 32 mm x-travel: 510 mm y-travel: 240 mm table surface area: 750 x 200 mm cutter diameter max.: 30 mm inserted tooth milling cutter dia.: 100 mm spindle taper: MK 3 quill stroke: 130 mm spindle turning speed range: 75 - 3200 U/min no. of turning speeds: 12 x links, 12 x rechts throat: 278 mm max. distance between table and spindle-nose: 600 mm voltage: 400 V / 50 Hz total power requirement: 1,1 kW weight of the machine ca.: 360 Kg dimensions of the machine ca.: 0,9 x 0,75 x 2,0 m • unused machine for demonstration purposes, • Machine is equipped with an adjustable depth stop, • Vertical adjustment of the milling head via dovetail guide, • Boring head adjustable to left and right til 360°, • with sturdy bottom-table. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Edge Gluing Machine ESSOR KAM 100 with 100mm working width! Kantenanleimmaschine - Edge Gluing Machine ESSOR KAM 100 Serial-No. 161608 Working width max. 100mm Kaltleim / Cold Glue System

Siemens Multix TOP with the following system components: Generator Polydoros LX 30/50 Tube Opti 150/30/50 C 0.6/1.0_Baujahr 2019 (ceiling hanging) Vertical tripod Vertix TOP • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the ...

Dough pre-portioner Kemper Relexer - SK -Dough pre-portioner Relexer SK -with high conveyor belt -Year of construction 2004 -32 Amp. -400 Volt 50Hz 3Ph

TABLE 500 X 800 ISO 40 CNC1600

Gear hobbing machine STAEHELY mod. SH25US + n. 2 Basket sanders D 1700 and D 1400

Eckenrundstossmaschine / Corner Rounding machine Tränklein EK Serial-No. ET104

Eckenrundstossmaschine / Corner Rounding machine Karl Krause EK Serial-No. ET104

Expro BSJJ-600T Tempura machine Serial: L041101C 2011, stainless, designed for coating products with liquid batter, ideal for products such as chicken nuggets, hamburger, schnitzel and more, variable speed, with blower for blowing surplus batter, overall length 4100mm, stainless mesh belt width 600mm, mobile, 3Ph

Naxos CNC Multi-Axis Cylindrical Grinder Year: 1987/2013 Max. swing: 630mm Max. distance workhead face to tailstock face: 4850mm Max. travel for Z axis: 5000mm Max. grinding distance for main wheel: 4520mm X axis infeed travel for both headstocks: 720mm Approx. weight between centers: 4000kg Power requirements: 460/3/60 This machine was completely remanufactured to new specifications in 2013 and installed in 2014. It was stripped down to the bare casting, table/base/wheel heads/work head and tailstock and the second z axis ways were fit and rescrapped. New electrical cabinet with all new wiring to the machine and new all components, hydraulic lines, air lines and new cable carriers were added. New Marathon 60HP motors for both grinding wheel heads. (The drives in the cabinet are set for 40 Hp) The spindle drives in the cabinet are Yakawa built in the USA along with the workh ...

Washing drum, drum sieve used, Diameter approx. 1000 mm, Drum length approx. 2000 mm Mesh spacing approx. 10 mm Stainless steel Drive approx. 0.75 kW Total dimensions approx. 3700 x 1900 x 2500 mm Can be used, for example, to wash vegetables or beets. Changes and errors in the technical data and information excepted.

Iberdrill Gear Column Drill Series T, TL25 drilling capacity for steel (ST 60) at continuous power S1: D25mm drilling capacity for grey cast iron (GG 20) with continuous power S1: D30mm thread cutting capacity for steel (ST 60) with continuous power S1: M 18 thread cutting capacity for grey cast iron (GG 20) with continuous power S1: M 22 Tool holder in the spindle: MK 3 spindle stroke (drilling depth): 120 mm Motor power spindle: 0.82/1.2 kW Drive: 8-speed gearbox with pole-shiftable motor Speed adjustment: manual Speed range for 50 Hz motor, n=1,500/3,000 rpm, pole switchable 65 -125 -185 - 365 - 540 - 1,055 - 1,560 - 3,060 rpm Feed: 300 mm x 270 mm Column diameter: 100 mm Distance spindle center / column (projection) 250 mm Machine weight (net) 250kg Gross weight 310kg Dimensions transport packaging (LxWxH) 2.14m x 0.6m x 0.8m Gearbox ...

Washing screw stainless steel, screen basket wash screw, drum sieve, blanching drum used, Manufacturer: WOLFF Type: B 1000/3000 Diameter approx. 1000 mm, Drum length approx. 2800 mm partly stainless steel Drive 0.55 kW Total dimensions approx. 4500 x 1800 x 2200 m. Changes and errors in the technical data and information excepted.

Ösmaschine / Eyeletting machine Hang Piccolo 101 Serial-No. ET107

Ösmaschine / Eyeletting machine Hang Piccolo 101 Eyeletting machine Hang Piccolo 101

Eckenrundstossmaschine / Corner Rounding machine Tränklein EK Serial-No. ET104-1

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 12000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: operating key and instruction: 2016 S25 003004 400 V, 50/60 Hz, with CEE plug and cable Color: light gray motorized height adjustment, axial grinding spindle adjustment Equipment: Opto-electronic measuring device with measuring electronics Image processing, PC (Original ISOG) CCD camera and monitor Dividing head Sk 40 with dividing disk 24 R 1 dividing disk each 14, 16, 18 Tightening screw M 16 Counter bearing complete with 4 center punch points Center point Sk 40 with driver Twist-u. Relief grinding device with rac ...

connected load frequency: 230 V battery: 24V / 100Ah Brush diameter: 510 mm turning speeds: 175 U/min 0: Luft 24 L / s tank capacity: 50 / 50 Liter weight: 160 kg range L-W-H: 1,1 x 0,52 x 1,0 mm Daewoo floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sehr schöne Tischbohrmaschine von IXION BST 13 very nice Drilling machine IXION BST 13 Tischbohrmaschine / Drilling machine IXION BST 13 Baujahr / Year 1971 - Serial-No. 37919 Abmessungen / Dimensions 220 x 400 x 820mm Gewicht / Weight 50kgs

Coupling Box for Folding Machines Heidelberg Coupling box I. Koppelbox für Falzmaschinen - Coupling Box for Folding Machines Heidelberg Coupling box I. Year 2003 - Serial-No. 848-300

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 12000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: operating key and instruction: 2189 400 V, 50 Hz, with CEE plug and cable Colour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Machine as new Accesories: SK 40 dividing head with 24 R dividing disc Graduated disc 20 R Tightening screw M 16 69871 Spiral and relief grinding device with rack housing Counter bearing with 4 tailstock centres Center point with driver Dressing device Dressing diamond Radius grinding device SK 40 complete with se ...

x-travel: 2500 mm y-travel: 750 mm z-travel: 1000 mm table surface area: 2550 x 800 mm spindle taper: SK 50 control: HEIDENHAIN, TNC 150 B The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eckenrundstossmaschine - Corner rounding machine Polygraph Y6 Serial-No. 711065/031

Fälzelgerät - Back Lining Machine MATADOR 11b

Bottle washer, make Krones, type: Lavatec KES 245-26-080, for 39.000 bph, control range 15.000-46.000 bph, 26 bottles/row, with 80mm cell pitch, 110mm chain pitch, with SPS Siemens S7 control, width: 4.745 mm, length: 11.283 mm.

CATALOG NUMBER 6679 TECHNICAL DATA - max width of the workpiece 250mm - max height of the workpiece 170mm 6 spindles: 1) horizontal lower 250mm 5.5kW 2) vertical right 170mm 5.5kW 3) vertical left 170mm 5.5kW 4) horizontal, upper 250mm 7.5kW 5) horizontal lower 250mm 7.5kW 6) universal 250mm, adjustable at an angle of 360 ° 5.5kW - 6 electrically adjustable spindle up / down - all adjustable spindles up / down, right / left - diameter of the spindles 40mm - 6 introductory pulling rollers, toothed, including 2 double ones - 6 rollers leading out, pulling, rubber, smooth, including 2 double - 2 clamps from above - from the bottom, a roller introducing toothed, pulling, torsion in the table before the first spindle - at the bottom, 2 pulling rollers, metal, smooth - 4 side clamps at the bottom - feed on cardan shafts - pneumatically pressed rollers - smooth regulati ...

Ösmaschine / Eyeletting machine Hang 103 SP SN. 14889 Serial-No. 14899 Fußbetrieb / Foot operation

Eckenrundstossmaschine / Corner Rounding Machine Krause Y6R Serial No. 711065/031 Tisch Modell / Table model

Adresseriermaschine - Addressing Machines VARIADRESS - CMC KR 2 II - 01 Year 1992 - Serial-No. CMC KR 2 II -01

Equipment: Code reading system HHS Xtend² for color codes consisting of: • Control unit X-tend² with code reader • Encoder with bracket • Touch screen screen • Folding switch with reading head CT10 • Bobst turntable ejector • Cable set complete for Bobst folding carton gluers

CATALOG NUMBER 6674 TECHNICAL DATA - max planing width 150mm - max planing height 130mm 7 spindles: 1) horizontal lower 150mm 3kW 2) vertical right 130mm 3kW 3) vertical left 130mm 4kW 4) horizontal upper 150mm 4kW 5) horizontal lower 150mm 3kW 6) vertical right 130mm 4kW - diameter of all spindles 35mm - all adjustable spindles up / down and right / left - from above, 4 pulling rollers, toothed - 4 rubber, pulling rollers from above - 2 clamps from above - electric adjustment of the planing thickness of 0.25kW - length of the introductory top 1970mm - central lubrication of the table top - smooth regulation of the feed speed - 1.5kW feed motor - diameters of the extraction ports 6x120mm - dimensions length / width / height 4000x1300x1600mm - weight about 3000 kg - German production - for 6 heads - used planer, very good condition Net price: PLN 36900  ...

Anleger - CMC Einsteckmaschine - Feeder - CMC Inserting machine RITMICA Universal H-200 Year 1992 - Serial-No. H-200 2 Feeder for CMC Inserting Machine

Grinding machine Heesemann type MFA 8 Specifications: • Working width (mm): 1300 • CSD system • Transverse grinding unit • Longitudinal grinding unit - shoe • Brush unit • Ionization • Vacuum carpet

bore diameter: 50 mm throat: 3000 mm workpiece height: max. 200 mm total power requirement: 75 kW weight of the machine ca.: 27 t dimensions of the machine ca.: m Brand: CMA Type: GRD50 CNZ 13030 Year of make: 2010 Capacity: 50 mm X: 3.000 mm Y: 13.000 mm Z: 400 mm Spindle taper: N: 3.000 Power : 75 kW Speed: 3.000 RPM Machine weight: 27.000 kg Tap capacity: M30 Drilling depth: 150-200 mm Bed: 13,000 x 3,000 mm Max. workpiece weight: 1,500 kg /m2 Tool changer: 12 pieces External spindle cooling Chip conveyor Can be seen working at a external location The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis FAT FTM 165 horizontal turning machine was manufactured in 2018. Ideal for precision turning operations, it offers robust construction and reliable performance. Consider the opportunity to buy this FAT FTM 165 horizontal turning machine. Contact us for more information.

This 6-axis Index MS 22 multi-spindle turning machine was manufactured in 2011. It features a Siemens Sinumerik 840D control system and includes a bar loader system with a maximum pressure of 6 bar. The machine is equipped with a Knoll coolant/filter system and various tooling attachments for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the Index MS 22 machine we have for sale. Contact us for further details.

This 3-axis clean CELL 3220 was manufactured in 2021. It features a powerful 600 W diode-pumped solid-state laser with a wavelength of 1064 nm and an integrated water-to-water cooling system. The machine is equipped with a Siemens control unit and a robust ABB robot for enhanced automation. If you are looking to get high-quality laser cleaning capabilities, consider the Clean Laser clean CELL 3220 machine we have for sale. Contact us for further details.

Rated power at 50%ED: 15kVA Short-circuit current: 14.4kA Electrode force: 40-240daN / single stroke Projection: 300mm --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

This 3-axis Sodick AG40L LN2 was manufactured in 2015. It features an X-axis travel of 400 mm, Y-axis travel of 300 mm, and Z-axis travel of 270 mm. The machine has been operated for 13,161 hours and is currently connected and available for inspection/testing. If you are looking to get high-quality die-sinking capabilities, consider the Sodick AG40L LN2 machine we have for sale. Contact us for further details.

Radial drilling machine used for drilling and milling Manufacturer: COLLET & ENGELHARD GmbH Type: BUV 1600 Year of construction: 1976 horizontally and vertically swivelling head Drilling capacity: 50 mm Travel arm: approx. 800 mm max column travel: 1000 mm Speed: 14 to 710 rpm Spindle stroke approx. 300 mm 380 V Dimensions: approx. 2600 x 1300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Electrical injection moulding machine manufactured in 2022. This HAITIAN Mars III MA 600/130B eco features a clamping force of 600 kN and a maximum injection pressure of 1,840 Bar. It has a screw diameter of 28 mm and accommodates molds with a maximum height of 330 mm. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN Mars III MA 600/130B eco machine we have for sale. Contact us for further details.

Tablet counting and filling machine Manufacturer: KING Type TB 4 DESCRIPTION: Semi-automatic tablet, capsule and pill counter with electronic counter in a practical small design. The KING TB4 electronic tablet counter offers a Highly versatile and accurate method for counting most forms of coated and non-coated tablets, capsules, hard and soft gelatin capsules. The machine is highly adjustable, quick to set up and clean, and has an excellent design. Tablet size mm/ output per minute 5/2600, 9/1800, 10/1600, 15/1000 Capsule size/ output per minute 1/800, 2/900, 3/1000, 4/1100, 5/1200 Product size 3-25 mm Container height min. 25-300 mm, diameter 15-125 mm max. container rate 35 cont./min.

Waldner Dosomat 12.6 filler and sealer for foil trays. Currently set up for using 82mm diameter foils for meat paste like pate or pet foods. Machine is in lovely condition and available for inspection.