wire cut machine used for sale

Hydraulic injection moulding machine manufactured in 2007. This Krauss Maffei 300-1400 CX features a clamping force of 3,000 kN and a tie bar distance of 630 × 630 mm. It includes a hydraulic clamping unit drive and an injection unit size of 300–1400. If you are looking to get high-quality moulding capabilities, consider the Krauss Maffei 300-1400 CX machine we have for sale. Contact us for further details.

A Studer CNC universal cylindrical grinding machine in need of repair is offered. Mains voltage/frequency: 380V/50Hz, control: Siemens SINUMERIK System 3, drive system: Siemens SIMODRIVE, measuring system: Marposs E5. Including various accessories. Documentation available. An on-site inspection is possible.

The Klingelnberg PSR 500 U worm gear testing machine was designed as a universal machine for the flexible testing of worm gears and is used by manufacturers of gear and gear technologies for the process of single-flank rolling testing for worm gear sets EFWP. Technical data Max. worm wheel diameter: 500 mm Max. spindle length: 500 mm Max. spindle diameter: 200 mm Center distance: 0 ... 400 mm Max. measuring speed: 60 rpm Braking torque: 2.5 Nm Max. worm wheel weight: 150 kg Max. spindle weight: 50 kg Table diameter: 300 mm Machine weight: 800 kg Dimensions: 1500 x 1500 x 1600 mm The following parameters can be measured here: • Single-flank deviations Fi', fi', fl', fk' • Crossing, concentricity, roundness (option) • Carrying pattern with digital camera • Pitch deviation • FFT analysis, spectrum Picture shows the machine in its current ACTUAL condit ...

SCM C30 4-fold combination machine Format Circular Saw Dressing Thickness Planer Machine Milling Machine Planing width 300mm Planing shaft: 3-tersa knife shaft Dressing table length: 1200mm Passage height: 3-200mm Format sliding table: 1070mm Besaeumlaenge Cutting height: 80mm Saw 90°-45° swivel Engine power: 400V 2 hp S1 Milling machine rigid 90° Milling machine rpm: Speeds of 4200-6300 rpm or 5000-7500 rpm G&STÜ-5500030 relkag21 SPECIAL PRICE: Fits in any small workshop!

The STUDER Internal Grinding Spindle Type 102560B 60,000 rpm is available for sale as a kit with accessories and tools as shown in the photographs. The set includes: STUDER Internal Grinding Spindle Type 102560B Different wheel chucks / accessories for internal grinding Tools and wrenches for assembly and adjustment Support and auxiliary elements Wooden box for storage and transport Condition: Used, from industrial machinery. Ideal set as a spare part or equipment for compatible STUDER grinding machines. The complete kit shown in the photographs is sold. For more information, price, measurements, compatibility or shipping conditions, please do not hesitate to contact us. Available for domestic and international shipping.

Table clamping surface: x-travel: 400 mm y-travel: 175 mm z-travel: 450 mm Spindle mount: ISO 30 Spindle speeds: 50-2000/50-3400 rpm Operating voltage: 380 V Total power requirement: approx. 2.5 kVA kW Space requirement: 1200 x 1000 x 1600 mm Weight: approx. 1100 kg

round material: 30 x 1 mm square material: 30 x 30 x 1 mm : 16 mm : 30 x 10 mm speeds: 9 U/min total power requirement: 1,1 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 0,82 x 0,60 x 1,26 m Electric roller profile with - 5 set of rollers 2x 20mm and 30mm for round material, 1x for flat material 1x for square material 1x for? - footswitch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working range: 1250x2250mm, max. feed speed: 48m/min, welding range: M3-M8, welding diameter: 3-8mm, stud length: 8-40mm, max. welding capacity: 30-40studs/min, max. feed: 48m/min, positioning accuracy: +/-0.2mm, length: 2400mm, width: 2700mm, height: 3100mm, the machine has been used very little and is in good condition. An on-site inspection is possible.

Throughput: 2000-4000bottles/h, number of rows: 12, the machine is steam-heated and fully functional, an on-site inspection is possible.

Workpiece holder head compatible with STUDER S30 and S40 grinding machines, completely rebuilt, overhauled and repainted by specialists in grinding machinery retrofit. The unit has undergone a complete reconditioning process to ensure excellent mechanical condition and a presentation in keeping with a rebuilt machine. Features: - Completely rebuilt and overhauled. - Mechanical components inspected and adjusted. - Revised engine and assembly. - Completely renewed paint. - Excellent general condition. - Ready for installation. - Compatible with STUDER S30 / S40. An excellent choice for replacing a worn head or for repair and retrofit projects of STUDER grinding machines. Immediate availability. For more information, photographs, technical characteristics or price, contact us.

Folding and Inserting Machine: speed: upto 4.000 per hour, maximum monthly performance: 70.000, maximum annual output: 600.000, power required: 230 V, noise level:

We are pleased to offer for sale a complete high-precision manufacturing cell designed for the production of long, helical and screw-profile components, including PCP and mud motor rotors, extruder and injection molding screws, compressor and pump spindles. The equipment includes: 1. 2008 LEISTRITZ PW190.8000.HP Peeling / Whirling — Fully Operational Capacity: 120 mm (4.72”) diameter × 8,000 mm (315”) length Machine weight: 92,594 lbs (42,000 kg) 2. 2011 LEISTRITZ LWN300 Milling / Hobbing — Fully Operational 3. 2009 LEISTRITZ PW300PM Milling / Hobbing — Not in Service 4. 2014 WEINGÄRTNER FINISH 450 Finishing / Polishing — Fully Operational This equipment forms a comprehensive production route covering roughing, profile machining, semi-finishing and final surface finishing of long, high-precision helical and screw-profile components. Typical applic ...

Arburg 420C-1300-675 (167) Item number: 167 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 297 g Clamping force: 1,300 kN Screw diameter: 50 mm Spray pressure: 2080 bar Spar spacing: 420 x 420 mm Clamping plate size: 615 x 615 mm Tool installation height min.: 350 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 84840 h Weight: 4330 kg Dimensions: 4.9 x 1.8 m Funnel: No Core train: Yes Air valve: Yes

This 3-axis DMG MORI NLX2500SY/1250 was manufactured in 2013. It features a maximum X-axis travel of 260 mm, Y-axis travel of +/- 50 mm, and Z-axis travel of 1345 mm. The machine is equipped with a 12 station turret with milling function and a spindle speed of 6000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI NLX2500SY/1250 horizontal turning machine we have for sale. Contact us for further details.

Spiral kneader Diosna SP 120 D Spiral kneading dough kneader from Diosna SP 120 D with solid stainless steel boiler for a maximum of 120 kg of dough.Kneading process over time with 2 timers, with automatic switching and shutdown.Trade-in and delivery on request. Type: SP 120 D mobile for max. 75kg flour or for max. 120kg dough with 2 automatic timers Spiral and boiler made of stainless material Boiler diameter 75cm Boiler capacity approx. 180 litres Machine can be driven on castors with a swivel castor Locking by 2 locks with plastic flour dust cover Stainless steel spiral and boiler 400 Volt frequency 50 Hz Weight of the machine approx. 550 kg Condition "good"

Control panel Pacmation made of Uhlmann C130 YOC 1996

Decorker, Fabr. Rink, Type: KM 670/2K as box uncorker, 2-head, 2,000 K/h, clock machine Running direction: li->re with decorker plate for 24 module box 0.33 lt, box longitudinal run attached control cabinet in VA with Siemens S7-300 control and operating module OP-Siemens

Manufacturer GER Model SR150-60 CNC Year 2007 FAGOR 8055i CNC Fixing area on table 1,800 x 550 mm Useful ground surface 1,500 x 680 mm. Longitudinal travel of the table 1,660 mm. Maximum weight on the table 1,700 kg. Automatic cross travel 600 mm. Max. distance from table to center of wheel 625 mm. Variable infinite table speed 2-28 m/min. Cross-table speed 0.02 – 5 m/min Vertical table speed 0.02 – 2 m/min Infinite table speed regulation INCLUDED Maximum width to be ground with a grinding wheel of 80 mm 680 mm. Minimum CNC programmable increment 0.001 mm Spindle speed 1,500 rpm Main motor power spindle 12 kW Total machine power 22 kW Wheel dimensions Ø 400x80x127mm. FAGOR 3-Axis Servo Motors and Regulators (X, Y, Z) included High-density electromagnetic plate INCLUDED Dimensions of the electromagnetic plate 1,500 x 600 mm. Coolant Filtration Equipmen ...

2004MC96 IIV02CANopenV05_19_0400 V50 Hz3+N17 kW41 A

ORDER NO. 6575 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 170mm - 7 spindles: 1) horizontal bottom 230mm, 11kW 2) vertical right 170mm 3) vertical left 170mm (2 and 3 spindle), 11kW 4) horizontal right 170mm, 5.5kW 5) horizontal upper 230mm, 11kW 6) horizontal bottom 230mm, 7.5kW 7) universal 230mm, adjustable at 360°, 7.5kW - all spindles adjustable up/down, right/left - spindle 3 and 5 electrically adjustable - ATS - spindle diameter 40mm - electric brakes - from above 4 pulling introductory shafts, toothed including 1 double - from above the introductory roller pulling rubber double - from above the shaft leading out, pulling, rubber, double - from below 2 metal rollers, pulling, smooth - pulling roller, rubber, double - feed on cardan rollers - pneumatically pressed shafts - smooth adjustment of the feed spe ...

Handy edge milling machine 230V. Scope of delivery as shown. Edge milling up to 7mm, round edge milling up to R3mm. Angle adjustable. HM plates rotatable and replaceable. This new machine comes from a warehouse clean-up. Scope of delivery incl. chip catcher (not shown here).

COLOMBO lathe, H points 800x1500, hydraulic tailstock, displayed.

AGIE AGIETRON HYPERSPARK 2 HS die-sinking EDM machine was built in 2008 in Switzerland by AGIE SA. The machine is designed for the production of precision dies, punching dies, punches and other elements with complex geometry using the electrical erosion. This technology enables the machining of workpieces made from difficult-to-machine and hardened materials, and also reduces or completely eliminates the need for further finishing operations, such as polishing. Electrical discharge machining is performed in a tank filled with a dielectric fluid, which affects the surface quality and dimensional accuracy of the machined workpieces. All process parameters are entered in an intuitive CNC controller, which facilitates the daily operation of the machine. The AGIE AGIETRON HYPERSPARK 2 HS sinker EDM is offered with tooling. The total weight of the EDM machine is 2800 kg. Technical specifica ...

Manufacturer: RAS Model: MiniBend Center 79.05 Year of manufacture: 2020 Type of Machine : Bending Center Included: robot KUKA KR16-2, spare parts and tools Find more here - .ucymachines/ Contact us at - sales@ucymachines

Horizontal turning machine manufactured in 1997. This BOEHRINGER VDF 315 CM features a maximum turning length of 2,049 mm and a chuck diameter of 400 mm. It is equipped with live tools for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 315 CM machine we have for sale. Contact us for further details.

Arburg 470C-1500-350(166) General information Item number: 166 Availability: In stock Year of construction: 2003 Brand: Arburg Specifications Spray weight: 210 g Clamping force: 1,500 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 470x470 mm Clamping plate size: 650x650 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 40.2 kW Operating hours: 83824 h Weight: 4410 kg Dimensions: 4.5 x 1.8 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes

Horizontal turning machine manufactured in 1997. This BOEHRINGER VDF 400 CM features a maximum chuck diameter of 500 mm, an X-axis travel of 620 mm, and a Z-axis travel of 2000 mm. It is equipped with a live tool for enhanced functionality. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 400 CM machine we have for sale. Contact us for further details.

Gathering machine Bourg BST-10 2 Towers Stitching Folds Cutting

Make OKUMA WITH A NEW SPINDEL IN 2019 - RUNS ONLY 6 MONTHS AFTER WAS CHANGED MOTOR AND SPINDLE type MX 45 VAE Year of manufacture 2001/3 CONTROLS: OSP - U100M Technical Details x-way 762 mm y-way 460 mm z-way 450 mm total power requirement 35 kW machine weight approx. 5000 KG Type: MX - 45 VAE Control: OSP - U100M working range: Axis X: 762 mm Axis Y: 460 mm axis Z: 455 mm Spindle speed range: 50 - 7 000 rpm VARIABLE SPEEDS ATC: TOOL BT 40 TOOL MAGAZINE 20 TOOLS tool magazine: 20 pcs. Total power requirement: 35 kVA LAST SERVIS ON SPINDLE ON 2019 - ( BRAND - NEW SPINDLE) COST OF SERVICE OWER 35000 EUR , MACHINE WAS WORKING FROM THAT TIME ONLY HALF YEAR. WE ORGANIZE FOR CLIENT AS WELL TRANSPO

WELIDING WORK STATION SCHLATTER WITH NEW MIYACHI WELDING CONTROLS. 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS - CONNECTION: 380V/50Hz - WELDING NOMINAL POWER - 56 kWA AT 50% - S MAX: 135 kWA - Arm distance min /max : 218/468 in mm - THROAT IN 450mm - CLOSING FORCE: 4KN - COOLING WATER REQUIREMENT: 6 liter / min 2. AWAILIBLE 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS included with safety glass and two button pust operational system. with all safety system integrated and working table.

1 Wire bending machine OMCG date 1997 technical status good , soft ware to be refurbished 2.Tube bending machine OMCG date 1998 technical status good, software to be refurbished

module: Diameter: mm boring diameter: mm Sprocket cutter DIN3968 Parting 65 RO36 R1 EK 20° The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vertical turning machine manufactured in 2008. This HONOR SEIKI VL 46 AR features a maximum turning diameter of 460 mm and a turning height of 400 mm. It is equipped with a chuck diameter of 300 mm or 380 mm and a spindle speed of up to 3000 rpm. If you are looking to get high-quality turning capabilities, consider the HONOR SEIKI VL 46 AR machine we have for sale. Contact us for further details regarding this machine.

Vertical turning machine manufactured in 2008. This HONOR SEIKI VL 46A features a maximum turning diameter of 460 mm and a turning height of 400 mm. It is equipped with a chuck diameter of 300 mm or 380 mm and a spindle speed of up to 3000 rpm. If you are looking to get high-quality turning capabilities, consider the HONOR SEIKI VL 46A machine we have for sale. Contact us for further details regarding this machine.

Arburg 470S-1300-350 (170) Hybrid with electric worm drive, without funnel General information Item number: 170 Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Spray weight: 127 g Clamping force: 1,300 kN Screw diameter: 35 mm Spray pressure: 2500 bar Spar spacing: 470 x 470 mm Clamping plate size: 650 x 650 mm Tool installation height min.: 275 mm Control: Selogica Language: German Power: 33.9 kW Operating hours: 85,400 h Weight: 5,100 kg Dimensions: 5 x 1.8 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes

6 Pockets, 2 Knives

MOSCOW 582 thread grinding machine was manufactured in the USSR. Technical data of MOSCOW 582 thread grinding machine - grinding diameter: 250 mm - grinding length: 500 mm - tooling (divider, fang, changewheels) - dimensions: 260 x 220 cm

This 4-axis HBS MPW 2010/3K/4MZ/1FK was manufactured in 2019. It features a maximum X-axis travel of 1450 mm and Y-axis travel of 2250 mm, with a motorised working stroke of 0-200 mm. The machine is equipped with advanced servomotor technology and includes a fully automatic stud feeder and a chip extraction unit. If you are looking to get high-quality welding capabilities, consider the HBS MPW 2010/3K/4MZ/1FK machine we have for sale. Contact us for further details.

This 3-axis TOPEDM TSH-400N die-sinking EDM machine was manufactured in 2005. It features a working area of 400 x 400 x 440 mm and a table size of 480 x 458 mm. The machine is capable of drilling holes with diameters ranging from 0.15 to 6.0 mm. If you are looking to get high-quality hole drilling capabilities, consider the TOPEDM TSH-400N machine we have for sale. Contact us for further details.

Cutting length X/Y: 250mm/250mm, max. sheet thickness steel/stainless steel: 6mm/4mm, table dimensions X/Y: approx. 1200mm/900mm, weight: approx. 1200kg. Including a 500mm stop extension. An on-site inspection is possible.

A compact electroplating unit is offered. Electrolytic bath for gold and silver refining applications, control: microprocessor control. Equipped with an integrated control unit with display and keypad. Weight: approx. 15kg, overall dimensions X/Y/Z: approx. 450mm/300mm/350mm. Inspection by arrangement is possible.

Press (n°1) Upstroking Manufacturer: Agila Closing force: 850 Ton Year 1997 hydraulic Steam Platens : 3 2 cavities (250 mm opening) Size heating platens: 1100 x 1400 x 76 mm Diam. piston 650 mm Hydraulic pressure: max. 250 BAR Hydraulic tank: 500 L Complete manual included Size press 2400 x 1400 x 4200 mm (LWH) Weight +/- 23.000 kg

Clamping force: 800kN, tie-bar spacing: 400mm, injection unit: 430, max. flow rate: 76l/min, max. hydraulic pressure: 210bar, control: CDIAS, weight: 3.6t, an on-site inspection is possible.

Clamping force: 1250kN, tie-bar spacing: 475x450mm, injection unit: 440, max. flow rate: 100l/min, max. hydraulic pressure: 190bar, weight: 6.6t, an on-site inspection is possible.

Clamping force: 1600kN, width: 1600mm, height: 2200mm, weight: 6.8t, an on-site inspection is possible.

Clamping force: 650kN, length: 4000mm, width: 1600mm, height: 2200mm, weight: 3.9t, an on-site inspection is possible.

Bottle washer PAC / Switzerland Type CB 12 Eind 8,000 fl./h 0.25 to 0.50 L glass bottle Year of construction 1997 FILM AVAILABLE - PLEASE REQUEST Further information and price on request

Niemeyer shaft base paver for lower parts 1100 mm incl. many accessories such as moulds, base sleeves, rotating device, spare parts, from location, immediately available

Clamping force: 1500kN, rated current: 133A, connected load: 74kW, an on-site inspection is possible.