136,809 used machines on RESALE, but how to find them? Machine Search
100 meters per roll Auction-ID: A1-50707-371
100 meters per roll Auction-ID: A1-50707-372
Load capacity: max. 1,500 kg. Wire thickness range: 0.5 - 9.0 mm Waistband-outer diameter. max. 1,000 mm Waistband-inner diameter. min. 300 mm Speed: 0 - 80 rpm
Auction-ID: A1-50707-115
Wire gauge range: 1.5 - 7.0 mm Section lengths: up to 8,000 mm Feed speed:
This 5-axis FANUC Alpha 1ID wire EDM machine was manufactured in 2008. It offers precision and efficiency for intricate metalworking tasks. If you are looking to get high-quality EDM capabilities, consider the FANUC Alpha 1ID machine we have for sale. Contact us for more information.
wire EDM machine, year 2006. Used machine. More info & price on IndustrialBuyer.
wire EDM machine, year 2018. Used machine. More info & price on IndustrialBuyer.
Manufacturer: Shinkawa Model: ACB-3000 Year of Manufacture: 2010 Condition : Good Electrical Rating - Supply Voltage: 230V - Full Load Current: 7A - Maximum Ampere Rating of the Short-Circuit and Ground-Fault Protective Device: 15A - Short-Circuit Current Rating: 10kA - Phase: Single Phase - Frequency: 50/60Hz Find more here - .ucymachines/ Contact us at - sales@ucymachines
Key data: 600 mm, 400 mm, 350 mm
For sale Sodick CNC wire EDM machine type ALC 600G. Used CNC wire EDM machine with minimal soot traces. Type ALC600G Premium • With linear motors in X, Y, U and V directions • With Smart Pulse (SP) CNC generator • High-speed wire feeder unit • Smart Linear • Automatic wire feeder in 9 seconds • Triple filtration system •Jumbo 20kg wire roll feeder is standard • Smart control with 19" TFT multi touch screen Technical data machine: Travel X-Y axis: 600 x 400 mm Travel U-V axis: 150 x 150 mm Travel Z-axis: 350 mm Max. workpiece dimensions: 800 x 570 x 310 mm (in a water bath) 800 x 570 x 340 mm (coaxial flushing) Working tank dimensions: 1050 x 710 mm Max. workpiece weight: 1000 kg Distance between floor and top of the table: 995 mm Controlled axes: 5 (X, Y, Z, U, V) Max. positioning speed m/min: 2.0 Wire diameter ø: 0.1–0.3 mm (optionally 0 ...
A Mitsubishi wire EDM machine including an automatic wire changer (AWF system) is available. Travel X/Y: 381mm/749mm, table dimensions X/Y: 647mm/797mm, max. workpiece dimensions X/Y/Z: 647mm/749mm/259mm, max. workpiece weight: 950kg. Machine dimensions X/Y/Z: approx. 1850mm/2600mm/1950mm, weight: approx. 4100kg. Including 12 wire spools and one ceramic replacement plate. The wire changer is defective. Documentation available. An on-site inspection is possible.
A lot of welding wire; Manufacturer: HYUNDAI; Total of 3 pieces; Type: SM-70 eco; Diameter: 1.0mm; Weight: 15Kg; further details see photos
A CNC flat wire vertical wire bending machine V&C GmbH is available. Wire thickness range: 0.8mm-10mm, max. wire width: 30mm, min. winding inner diameter: 20mm, max. winding outer diameter: 250mm, max. winding height: 160mm, max. winding height with holding rod: 500mm, max. winding length: 250mm, min. bending radius: R6°, max. number of edges: 12/revolution. Machine dimensions X/Y/Z: approx. 2650mm/1000mm/1800mm, weight: approx. 800kg. Documentation available. On-site inspection is possible.
This 5-axis Mitsubishi MV1200R was manufactured in 2018 and features advanced capabilities such as X-Axis Travel of 15.7, Y-Axis Travel of 11.8, and Z-Axis Travel of 8.7. It includes a Mitsubishi M800 control, Auto Wire Threading, and a Chiller for enhanced performance. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV1200R machine we have for sale. Contact us for more information about this machine.
This AGIE CHARMILLES CUT 20 Erosion machine was manufactured in the year 2008. It is equipped with a Charmilles CNC control unit.
This 5-axis Mitsubishi MV2400S wire EDM machine was manufactured in 2015. It features X, Y, Z movements of 600 x 400 x 310 mm and U, V axes at 150 x 150 mm, supporting a maximum workpiece weight of 1,500 kg. Equipped with an advanced Mitsubishi M700 controller with 3D CAD/CAM capabilities, it ensures precise machining. Consider the opportunity to buy this Mitsubishi MV2400S wire EDM machine. Contact us for more information about this machine.
Wire EDM machine Fanuc alpha IB BJ 2002
This 3-axis AGIE AGIECUT CLASSIC S erosion machine was manufactured in 2000. It has impressive axis movements with x=350mm, y=250mm, and z=256mm, providing ample flexibility for handling erosion tasks. The machine accommodates a maximum piece size of 750mm in length, 550mm in width, and 250mm in height, and it can manage weights up to 200kg. The dimensions and capabilities make it suitable for a wide range of erosion processes, ensuring detailed and precise outcomes. The AGIE AGIECUT CLASSIC S machine we have for sale is designed for robust performance and precision. Contact us for more information about this erosion machine.
This AgieCharmilles Agiecut Classic V3 was manufactured in 2007. A wire EDM machine, it features dimensions of 1940 × 2300 × 2600 mm and a total weight of 3460 kg. It supports workpiece dimensions up to 1050 × 650 × 420 mm and a maximum weight of 800 kg. The machine offers a taper angle up to ±30° and a dielectric volume of 1000 liters. Contact us for more information about this machine.
This 5-axis AGIE CUT 400 Sp wire EDM machine was manufactured in 2013. It features a high-speed CC generator, automatic threading, and rethreading for wires from 0.30 to 0.20 mm. The machine includes a PC-based control system with a touchscreen and offers advanced NC functions like 3D graphic simulation and integrated documentation. If you are looking to get high-quality EDM capabilities, consider the AGIE CUT 400 Sp machine we have for sale. Contact us for more information.
This 5-axis AGIE CUT 300 wire EDM machine was manufactured in 2013. It features a maximum taper angle of 30/100° mm, can handle workpieces up to 1050 x 650 x 250 mm, and supports a maximum weight of 400 kg. If you are looking to get high-quality EDM capabilities, consider the AGIE CUT 300 machine we have for sale. Contact us for more information about this machine.
This 5-axis Mitsubishi FX 20 wire edm machine was manufactured in 1999. It offers precision and efficiency for complex wire EDM tasks. Consider the opportunity to buy this Mitsubishi FX 20 wire edm machine. Contact us for more information.
This 5-axis AgieCharmilles CUT 300MS was manufactured in 2016, featuring submerged wire-cutting technology. It supports a maximum workpiece size of 1200 × 700 × 400 mm and a weight up to 1500 kg. The machine offers rapid movement across X, Y, U, V axes at 9.8 m/min and includes integrated collision protection. If you are looking to get high-quality precision cutting capabilities, consider the AgieCharmilles CUT 300MS machine we have for sale. Contact us for more information.
ID3691 Atlas Speedcut 100 year/Baujahr 2013 Wire saw, engine defect Wire saw, motor defect
This 3-axis AGIE Challenge 2 eCut wire EDM machine was manufactured in 2006. It offers precision electrical discharge machining capabilities, ideal for detailed and intricate metal work. Consider the opportunity to buy this AGIE Challenge 2 eCut wire EDM machine. Contact us for more information about this machine.
26 Coils EDM-Cut Brass Blank Ø 0.25mm 500 N/mm² DIN 160 8 kg/spool
Wire Bending Machine WAFIOS AG BM 30 – 2017 | Very Good Condition For sale: high-class CNC wire bending machine WAFIOS BM 30, year of manufacture 2017. The machine is in very good technical condition, with low operating hours – ready for operation without additional investment. Key parameters: Wire diameter range: 2.0 – 6.5 mm Working range: 600 N/mm²: 2.0 – 6.5 mm 1,200 N/mm²: 2.0 – 4.5 mm 1,900 N/mm²: 2.0 – 4.0 mm Optional: capability to process wire from 1.5 mm Maximum feed speed: 120 m/min Bending torque: approx. 250 Nm Number of CNC axes: 7 Equipment: Decoiler Safety fencing Drive rollers (3 pairs of feed rollers) Functionality and capabilities: Unlimited rotation angle of mandrel axis and bending shaft Precise bending head operation (vertical and lateral movements) Possibility to extend functionality (e.g. CNC support plate) High pro ...
This 5-axis Mitsubishi FX10K wire EDM machine was manufactured in 2001. It features a 32-bit CNC control, automatic wire threading, and a generator for brass wire cutting. Capable of handling workpieces up to 630 × 530 mm and 500 kg, it includes a water purifier tank and central lubrication. Reach out for more information about this machine.
Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -swiveling -with gear motor: SEW type R53A -Power: 380 V 0.73 kW -Steel cable: Ø 5 mm, length: 13 m -Transfer in current condition as seen -Motor: tested and OK -Dimensions: 930/300/H510 mm -Weight: 60 kg
SKS PF5 Wire Feeder and FPM8i Component Package Manufacturer: SKS Welding Systems Device type: Wire feeder devices and system components Total quantity: 14 pieces PF5-LEA 10-2-9: 1 piece PF5-L 10-2-21: 2pcs PF5-R GFS 10-2-104: 1 piece PF5-L GFS 10-2-108: 3 pieces PF5-L 10-2-8: 5 pieces FPM8i 10-13-200: 2 pieces Design: Industrial MIG/MAG wire feeders Wire drive: 4-roller system Scope of delivery: Wire feeder devices according to the above parts list
Two Wire EDM machines manufactured in 2015 and 2019. These 4 axis ZK Genius 700 (2015) + ZK Genius 700 (2019) + Chameleon- Quad (2015) features a travel distance of 400 x 350 x 350 mm and a table size of 575 x 500 mm, accommodating workpieces up to 700 kg. Includes a controlled C axis and rotary spindle, along with a CO/2 Kraft & Bauer fire extinguishing system. Consider the opportunity to buy this ZK Genius 700 (2015) + ZK Genius 700 (2019) + Chameleon- Quad (2015) wire EDM machine. Contact us for further details.
indoor crane, crane, electric wire rope hoist, hoist, motor cable winch, motor winch, tackle, pulling winch, pulley block -Handover: in the current condition as viewed -Condition: Operation is missing a switching element (can be installed for an additional charge) -Engines: tested and OK -Nominal load: 1125 kg -Lifting speed: 6.3 m/min -Lifting height: 6.3 m -Dimensions: 1100/1000/H700 mm -Weight: 368 kg
Wire reel, pasture wire reel, barbed wire winder, wire winder, wire winding machine, pasture fence winder, winding device -Drum diameter: 800 mm -Drum width: 990 mm -Drive: hydraulic -The device could be used with a corresponding front loader or three-point hitch -without front loader mount and hydraulic connections -Dimensions: 1020/1450/H830 mm -Weight: 318 kg
Wire feed rollers for MIG / MAG hose package, feed motor for inert gas welding device, inert gas device -with: Euro plug-in coupling -Number: 4x wire feed rollers available -Price: per piece -for a surcharge: gear motor, electric motor, direct current motor are also available -Dimensions: 285/90/H180 mm -Weight: 2.5 kg
A Wafios wire straightening and cutting machine with a straightening attachment of 1000mm is available. Wire diameter range: 1.5mm-7mm, cutting length range: 20mm-3000mm, straightening rotor speed: 6800rpm, pitch: 71/69, cutting stroke: 270/min, machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 1400kg. An on-site inspection is possible.
Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder -Wire straightening machine: decoiler-straightener combination -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg
Conveyor belt/wire webbing/rod webbing - Length: approx. 3,700 mm - Width: 600 mm --------------------------------------------------------- Conveyor belt / wire belt / mesh belt - Length: approx. 3,700 mm - Width: 600 mm
Wire feed drive for wire feeder case for MIG/MAG welding machine, MIG/MAG welding machine, wire feeder case, wire feeder, actuator, actuator, air damper actuator, geared motor -Manufacturer: ELVI, actuator -Actuator: Type 100605 -Voltage: 24 V -Number: 6x drive units available -Price: per piece -Dimensions: 220/200/H120 mm -Weight: 1.9 kg/pc.
Conveyor belt/wire webbing/rod webbing - Length: 3,250 mm - Width: 600 mm - Pitch: 12.7 mm - With geared motor --------------------------------------------------------- Conveyor belt / wire belt / mesh belt - Length: 3,250 mm - Width: 600 mm - Partition: 12.7 mm - With gear motor
Indoor crane, crane, electric wire rope hoist, hoist, motor cable winch, motor winch, tackle, pulling winch, pulley block -Manufacturer: Verlinde, control for electric wire rope hoist type VT202116 -Control voltage: 48 V -Frequency converter: Variator VT -Individual components: see photos -Delivery/Price: complete -Dimensions: 630/310/440 mm -Weight: 30 kg
Conveyor belt/wire webbing/rod mesh webbing belt with center drive - Length: approx. 2,500 mm - Working width: 300 mm - with mid-drive ------------------------------- Conveyor belt / wire belt / mesh belt with center drive - Length: approx. 2,500 mm - Working Width: 300 mm - With center drive
Wire electrode, aluminum welding wire, aluminum welding rod made of aluminum-magnesium alloy -various manufacturers: -7x Elisental 1.2 mm SG-AlMg5 -1x MTC 1.0 mm AlMg5 -6x ALCAN 1.2 mm S-ALmg 5 -1x Thyssen 1.2 mm AlMg4.5Mn -Weight: 7 kg/roll Price: per piece
This AGIE Agiecut VERTEX 3 Erosion machine was manufactured in the year 2006 in Switzerland and has 37021 erosion hours. It is equipped with an Agievision 5 Software version 07.08.01 control unit.
This 5-axis ONA U 400 wire EDM machine was manufactured in 2000. It features a table travel of 600 x 400 mm and a Z-axis travel of 400 mm, accommodating a maximum workpiece size of 1200 x 880 x 400 mm with a weight capacity of 850 kg. If you are looking to get high-quality wire EDM capabilities, consider the ONA U 400 machine we have for sale. Contact us for further details.
Wire cutter Type: AU-1000 iA Manufacturer: ACCUTEX Year: 2015 Max size of the work piece:1330 x 900 x 595 mm Max. weight of the work piece: 5000kg X/Y/Z/U/V 800 / 600 / 400 / 150 / 150 mm Diameter of the wire: 0.15-03 mm Continuously controlled 4 axes X, Y, U, V Drive system using AC servo drives Max. cut cone ± 22.5 °/ 100 mm Accuracy class of ball screws rpm C1 - the highest Filter system capacity l Main tank 1630 l, secondary tank (Z=600) 1280 l Max. cutting speed mm²/min 250 Dielectric conductivity measurement Auto – 5 200 k-cm Auto dielectric temperature measurement with an accuracy of ± 1°C Input kVA 15 Weight of the machine: 8500 kg Windows CE control system product for vertical alignment paper filter 2 pcs deionization resin - 1st filling container for deionization resin upper and lower nozzles – 2 pcs diamond guide 2 pcs tool for removin ...
This 5-axis Sodick AQ535L wire EDM machine was manufactured in 2007. It features an X-axis travel of 550 mm, Y-axis travel of 350 mm, and Z-axis travel of 300 mm. The work table size is 790 x 500 mm, with a maximum workpiece weight capacity of 800 kg. If you are looking to get high-quality wire EDM capabilities, consider the Sodick AQ535L machine we have for sale. Contact us for further details.
maximum number of results exceeded
please refine your search
25 € 
