winkelmann sew used for sale

Precision pump with drive WÖHR BGR260 motor: SEW with MOVIMOT 0.55 kW 230 / 400 V 41 - 412 rpm used, tested ! Dimensions: 1010 x 280 x 290 mm

Gear motor variable / adjustable SEW S60- 21 B ( S60-21B ) 0,0,75 kW / 0,48 kW (1440 / 940 rpm) 23 - 115 rpm hand-adjustable 380 V IP55 shaft diameter: Ø 35 mm used, tested ! Dimensions: 720 x 340 x 280 mm

Roll-up door PAGUS 1500 x 2000 mm Alu ! Drive SEW SF47 DT80K4/BMG/1S 0.55 kW 83 rpm 220 / 380 V used, tested ! Dimensions: ca 1860 x 520 x 190 mm

Gear motor with brake SEW SF37DR63L4/BR/TF/C/IS 0,0,37 kW 35 rpm 220 / 380 V IP65 shaft diameter: Ø 20 mm Flange diameter: Ø 120 mm New ! Dimensions: 430 x 240 x 160 mm

Adjusting disc SEW Eurodrive 01276921 1647431 for gearboxes EVF 01 shaft diameter: Ø 20 / 19 mm outer diameter: Ø 119 mm New ! Dimensions: 120 x 120 x 100 mm

Gear motor SEW- EURODRIVE type: R167 DRE225M4/TF ( R167DRE225M4/TF ) 45 kW 37 rpm 400 / 690 V shaft diameter: Ø 120 mm with FLENDER coupling used, tested ! Dimensions: 1600 x 700 x 950 mm

Adjustment disc SEW Eurodrive 01276891 1647431 for gearbox EV 01 shaft diameter: Ø 20 / 19 mm outer diameter: Ø 119 mm New ! Dimensions: 120 x 120 x 100 mm Weight: 1.3 kg

Geared motor with forced fan SEW R87 DRS90M4/V ( R87DRS90M4/V ) 1.5 kW 13 rpm 230 / 400 V IP55 Forced fan: 97 W New ! shaft diameter: Ø 50 mm Dimensions: 750 x 350 x 290 mm

Adjustment discs SEW Eurodrive 01277782 1647458 for gearbox EV 11 ( 1:6 ) shaft diameter: Ø 19 / 24 mm outer diameter: Ø 155 mm New ! Dimensions: 160 x 160 x 130 mm

Gear motor with brake and tachogenerator SEW K157 CV180M4/BM/HR/TF/AV1H ( K157CV180M4/BM/HR/TF/AV1H ) 33 rpm 340 V 101 Hz ! IP54 shaft diameter: Ø 120 mm used, tested ! Dimensions: 1550 x 700 x 700 mm

SULZER BOBUSTA PUMP 300M 220V USED BUT WORKS PERFECTLY SUBMERSIBLE WORKS WELL IN ANY TYPE OF CONTAINER (FROM LIGHT TO HEAVIEST SERVICE SUCH AS WATER OR SEWAGE)

Gear motor SEW eDFT100L8TF 0.66 kW 0.9 rpm 220 / 400 V IP55 Ex Protected shaft diameter: Ø 100 mm used, tested ! Dimensions: 1130 x 450 x 680 mm

Geared motor SEW-Eurodrive WA20/TDT71D4/MM03/MFP/BW1 0,0,37 kW 36 rpm 380 - 500 V 3AC 50 / 60 Hz IP54 Hollow shaft diameter: Ø 20 mm Wavelength: 100 mm groove width: 6 mm 2x Flange: Diameter Ø 62 / 55 mm bolt circle diameter: Ø 70 mm 4x threaded hole: M6 x 1.0, depth: 18 mm 2x gear foot: 90 x 80 mm hole spacing (parallel to shaft): 75 mm hole spacing (transverse to shaft): 60 mm hole diameter: Ø 6.5 mm Gear motor is without inverter ! used, tested ! Dimensions: 315 x 190 x 210 mm

Gear motor with brake SEW RF60DT80N2BMG/Z 1.1 kW 45 rpm 230 / 400 V IP54 shaft diameter: Ø 30 mm Flange diameter: Ø 160 mm New ! Dimensions: 600 x 200 x 180 mm

Blade mixer Manufacturer: SEW-EURODRIVE Type: FAF 47 DT7104/1F Power: 0.37 kW Speed: 1380 rpm LWH: 210 x 300 x 1550 mm

Gear motor with brake SEW RF40D80K4BS 0.55 kW 180 rpm 220 / 380 V shaft diameter: Ø 25 mm Flange diameter: Ø 160 mm New ! Dimensions: 530 x 175 x 220 mm

Propeller mixer Manufacturer: SEW-Eurodrive Type: RF 40 EDT9034 Propeller blade diameter: 250 mm LWH: 320 x 320 x 1550 mm

Gear motor SEW AFF40DT63L - 4 ( AFF40DT63L-4 ) 0.25 kW 52 rpm 230 / 400 V shaft diameter: Ø 30 mm Flange diameter: Ø 200 mm New ! Dimensions: 370 x 290 x 200 mm

Gear motor SEW-Eurodrive WA10 DT56L4/TF 0.12 kW 127 rpm 220 -240 / 380 - 415 V 3AC IP54 Hollow shaft diameter: Ø 15 mm New ! Dimensions: 260 x 140 x 120 mm

Servo motor with gearbox and brake, permanent magnet motor SIEMENS 1FT6102-8AH71-4SH1 4500 rpm IP65 3 20 V Getriebe SEW KAZ67/R AQH190/3 i = 15,19 Welle: Ø 40 mm New ! Dimensions: 880 x 250 x 200 mm

The Hidrostal Betsy 125GG (popularly also called eekels pump), has been a great success for years! main reason for this:, , spacious dirt passage, pumps viscous liquids with solid particles, high output against a particularly low engine power, suctions very quickly and up to a great suction height (8.5 meters), blockage-free wear-resistant screw centrifugal impeller, can slobber and can run dry, , Machine can be used well for:, , pumping sludge, Keeping sewer wells and cellars dry, everywhere that really needs to be sucked and slobbered, emergency pump unit including fire brigade, water boards and, Water purification, pumping surface water, keeping construction pits and construction trenches dry, , MAX capacity : 342 m3/h at 1500RPM , 400 m3/h at 1800RPM, MAX head : 26 mwc at 1500RPM , 39 mwc at 1800RPM, MAX dirt passage : 100 mm, , Throughput capacity: 340 m3/h, Max dirt passage: 100 ...

Gear motor with brake SEW FHF37DT80K4/BMG/TH/ISU4 0.55 kW 58 rpm 400 V IP54 Shaft diameter: 30 mm Flange diameter: 160 mm New Dimensions: 460 x 340 x 180 mm

Conveyor belt 720 mm, stainless steel, own motor

Vector electric motor with gearbox, SEW Eurodrive electric motor with gearbox, 11kW, 316 RPM works disassembled

Three-phase electric motor with brake SEW KF66DT90S4BM/HR 1,1 kW 40 rpm 220/ 380 V IP54 Design: B5, with flange hole spacing: 210mm shaft diameter: Ø 35 mm New Dimensions: 650 x 350 x 270 mm

BA150E D285, This 6 inch diesel-driven waste water pump has been the best-selling model from the BA series for years., This pump set is compact and multifunctional due to its unique pump curves and large dirt passage., Common applications: sewage and waste water, surface water, ballast projects., , Capacity up to 470 m3/h and pressure up to 37 mwk, 80 mm bore and wear plate with cutting grooves., , Press x Suction (inches) 6 x 6, max. capacity (m3/hour) 500, max. head (mwc) 37, Dirt passage (mm) 80, Vacuum system (m3/hr) MP50 (50 m3/hr), Diesel engine Perkins//Caterpiller, max. speed (rpm) 1900, Fuel consumption at BEP (l/h) 9, Sound level (dB at 10 m) 64, Dimensions l x w x h (mm) 2270 x 1050 x 1595, Dry weight (kg) 1600, , Throughput capacity: 470 m3/h, Max dirt passage: 80 mm, Motor brand: Perkins, Max. head: 37 MWK, Weight: 1600 kg, , = More information =, , Year of manufacture: 2018 ...

Gear motor with brake and sine wave - speedometer SEW FH37/G DT904S4/BMG/HR/TF/ES1S/IS3 1.1 kW 98 rpm 220 / 380 V IP54 shaft diameter: 30 mm New ! Dimensions: 550 x 290 x 280 mm

RA1851 electromechanical pusher installed in a support frame made of aluminum profiles Function: Push-off of the incoming material 90° to the conveying direction Make: Transnorm outer dimensions of the frame: LxWxH=1.720x1.080x940 mm suitable for infeed conveyor up to 1000 mm total width dimensions of the push-off panel: H=600 mm, W=650 mm total weight: 108 kg Features: condition: good (used) Construction year: 2008 Länge in mm: 1720 Width in mm: 1080 Height in mm: 940 Nominal / outside width in mm: 1080 Antrieb: SEW Getriebemotor mit MOVIMOT Electric data: 380-500 KW: 0,055/0,55/S1 Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. ...

Servo motor with gearbox and brake, permanent magnet motor SEW PSKF522 CM71S/BR/TF/RH1L/SB50 ( PSKF522CM71S/BR/TF/RH1L/SB50 ) < br />120 rpm IP65 400 V Shaft: Ø 32 mm Flange: 105 x 105 mm New ! Dimensions: 580 x 190 x 140 mm

Optima EC automatic continuous scale 1390-750-1500 RA1259 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Technical data (see PDF for further details) Manufacturer: Optima Control Systems GmbH (WIPOTEC-OCS GmbH) Type: EC Year of construction: 2000 Machine type: automatic checkweigher Total size: approx. 1390 x 750 x 1500 mm (WxDxH) Electrical connection Nominal voltage: L1/N/PE 230V AC / 115V AC (+6 % / -10 %) Nominal frequency: 50Hz / 60Hz (+/-2 %) connected load: 1,5 KW Fuse protection: 10 A Protection class: IP 65 according to DIN 40050 Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g calibration values e: from 1g degree of accuracy: from +/- 0,5g Temperature: 5° C - 40° C relative ...

Gear motor with brake SEW R37DT71D4/BMG/HF/Z/AMB1 0.37 kW 71 rpm 400 V IP54 shaft diameter: 25 mm New! Dimensions: 500 x 220 x 160 mm

Garvens Automation continuous weighing scale 1600-1150-950 RA1975 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Manufacturer: Garvens Automation Type: SL 100 ID1 Year of construction: 1996 Machine type: automatic checkweigher Total size: approx. 1600 x 1150 x 550 mm (WxDxH) Electrical connection (Plug and Play) Nominal voltage: 380V and 220V Nominal frequency: 50Hz / 60Hz (+/-2 %) Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g Conveyor belt 1600-1150-950 and SEW gear motor with frequency converter Conveying length (FL): 1600 mm effective width (NUB): 1150 mm belt width (GB): 950 mm Motor Type: SEW Gearmotor with frequency converter Motor Power: kW 0.55/0.55 Speed: 0,02-1,2 m/s Feat ...

Gear motor SEW SA42LP71 D63L4B03/HR/TF ( SA42LP71D63L4B03/HR/TF ) 0,25 kW 34 rpm i=37,94 220/ 380 V IP54 B35, with foot and flange shaft diameter: Ø 30 mm New ! Dimensions: 510 x 180 x 180 mm

Transnorm infeed diverter diverter inclined infeed inclined outfeed 30°-2005-1930-1000 RA1863 Exhibit Make: Transnorm Year of manufacture: 2016 Discharge angle: 30° Length: 1750 mm inclined inlet and 1130 mm with total width, total length 2880 mm and a middle length of 2005 mm Belt width (RB): 1000 mm Frame height: 150 mm Nominal/outer width (NB): 1150 mm Currently set height: 560 mm Conveying speed: with frequency converter freely adjustable between V 380-500 kW 0.4-4 Overall height side wall: 200 mm Scope of delivery: motor with frequency converter, two supports, side guides, two light barriers and an emergency stop switch Features: Construction year: 2016 scope of delivery: including supports and side guides, Lichtschranken, Notausknopf angle: 30° Antrieb: SEW Getriebemotor mit MOVIMOT condition: Ausstellungsstück Belt width in mm (GuB): 1000 Electric data: 380-400 Frame width in ...

Gear motor variable SEW gearbox: S42-VUO 17-81 rpm manually adjustable via V-belt motor: eDFT71D-4 0,37 KW 1370 rpm 220/ 380 V 3AC IP54 Shaft diameter: Ø 25 mm Motor base: 130 / 135 x 124 mm hole spacing (parallel to the shaft): 100 mm hole spacing ( transverse to shaft ): 80 mm hole diameter: Ø 10.5 mm New ! Dimensions: 430 x 220 x 360 mm

Gear motor variable / adjustable SEW S60- D22 B ( S60-D22B ) 0,0,75 kW / 0,48 kW (1440 / 940 rpm) 15 - 115 rpm hand-adjustable 380 V IP55 shaft diameter: Ø 35 mm New ! Dimensions: 710 x 350 x 280 mm

Transnorm curved belt conveyor right 40°-780-600 RA1848 Make: Transnorm Running direction: 40° right running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 780 mm Inner radius (IR): 600 mm V230/400 kw 0,37 Height frame: 280 Scope of delivery:with motor, without supports (please enquire if required) Optionally available: Supports Side guide one and both sides frequency inverter Features: Construction year: 1996 condition: good (used) Nominal / inner radius in mm: 600 Nominal / outside width in mm: 780 Belt width in mm: 600 angle: 40° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,92 scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing  ...

Gear motor with brake SEW, FELTEN & GUILLEAUME KAZ87BD132S1-4/TF BD132S-4B 5,5 kW 25 rpm 230 / 400 V IP56 Hollow shaft diameter: Ø 60 mm Ex-proof ! used, checked ! Dimensions: 930 x 430 x 380 mm

Transnorm Belt Conveyor 1000-600-500 RA1281 The Transnorm belt conveyor is from 2013 and is in a new (used) condition. It is perfectly suited as a feeding belt and has a reflective light barrier with double lens (SICK WL100 P4430) to control the flow of goods. It has an engine of the brand SEW and MOVIMOT converter to control the speed. Columns are not included in the scope of delivery. These are optionally available on request. Technical data: Manufacturer: Transnorm Type: B11 Built: 2013 Condition: as good as new (exhibition machine) Engine: fully functional Conveyor length (FL): 1000 mm Nominal/outer width (NB):600 mm Usable width (NUB): 540 mm Belt width (GB): 500 mm Engine Type: SEW Gear Motor + MOVIMOT Inverter Motor Power: kW 0.75/S1 Hz 50 A 1.90 Conveyor speed: adjustable from 2 to 90 m/min Drive: Head drive Weight: 80 kg Scope of delivery: without supports (if necessary plea ...

Gear motor with inverter and brake SEW KAZ97DT90L4BMGHR/MM15RA1A MOVIMOT MM15C-503-00 0,3 / 1.5 kW 1.6 / 8.0 rpm 380 - 500 V IP54 hollow shaft diameter: Ø 70 mm with control (MOVIMOT) ! used, checked ! Dimensions: 770 x 400 x 420 mm

Belt conveyor slider 1900-300-1050 Make: Transnorm like new, showroom machine Year 2018 Length:1900 mm Belt width: 300 mm Stand dimensions: 790x480 mm Current conveyor belt height: 1050 mm Adjustable foot height: 100 mm Maximum ejection width: 890 mm Belt conveyor speed: 0,03-1,487m/s Electrical data Completely wired with sensors, direct wiring in the control box Belt conveyor motor data: V300-500, kw 0,75/S1 with frequency converter Ejection motor data: V300-500, kw 0,11-1,1/S1 with frequency converter and Brake Features: Belt width in mm: 300 Conveying length in mm: 1900 Antrieb: SEW Getriebemotor mit MOVIMOT Foot plates: 790x480 Conveyor speed m / s: 0,03-1,487 Bauhöhe in mm (BH): 1050 For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to ...

Geared motor with inverter SEW R47DT71D4/MM03/BW1 MOVIMOT MM03C-503-00 0,075 / 0,37 kW 2,3 / 11,0 rpm 380 - 500 V IP54 shaft diameter: Ø 30 mm with control (MOVIMOT) used, checked ! Dimensions: 440 x 230 x 270 mm

Transnorm belt curve conveyor left GKF 70°-730-600 IR600 RA1936 The Transnorm belt curve is fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 730 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optionally available Conveying speed (v m/s): freely adjustable with frequency converter b ...

Servo drive SEW R77DLR90L4BE5HR/IS/TF/AS7W 140 rpm 329 V IP54 shaft diameter: Ø 40 mm without servo drive ! New ! Dimensions: 770 x 300 x 270 mm

Transnorm conveyor belt GF 1250-600-500 RA2096 Technical data: Conveyor length (NL): 1250mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 1250 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit S ...

Servo motor with gearbox and brake, permanent magnet motor SEW KAF47 CM71S/BR/TF/RH1M/SB64 ( KAF47CM71S/BR/TF/RH1M/SB64 ) 3000 rpm 400 V IP65 gearbox: SEW i 39,61:1 Hollow shaft diameter: Ø 35 mm Shaft length: 150 mm groove width: 10 mm Flange diameter: Ø 130 / 200 mm bolt circle diameter: Ø 165 mm 4x bore: Ø 11 mm used, tested ! Dimensions: 580 x 220 x 210 mm

Servo motor with gearbox and brake, permanent magnet motor SEW KAF47 CM71S/BR/TF/RH1M/SB64 ( KAF47CM71S/BR/TF/RH1M/SB64 ) 3000 rpm IP65 Gear: SEW i 39,61:1 hollow shaft: Ø 35 mm Flange: Ø 200 mm used, tested ! Dimensions: 580 x 220 x 210 mm

Transnorm Rising falling Incline with arch belt conveyor GF 10540-600-500 RA2104 Technical data: Conveyor length (NL): 10540 mm (10040 mm incline + 500 mm arch) frame width (NB): 600 mm belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, R27 DRE80M4BE1/MM15/LN Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 10540 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven ...

Gear motor with inverter and brake SEW S67 DT80N4/BMG/MM07/MFP ( S67DT80N4/BMG/MM07/MFP ) MOVIMOT MM07C-503-00 0,15 / 0,75 kW 5,1 / 26 rpm 380 - 500 V IP54 shaft diameter: Ø 35 mm with control (MOVIMOT) ! used, tested ! Dimensions: 560 x 250 x 260 mm

Transnorm Rising falling Incline belt conveyor GF 7200-600-500 RA2053 Technical data: Conveyor length (NL): 7200 mm (3800 mm + 3400 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7200 Nominal / outsid ...