126,702 used machines on RESALE, but how to find them? Machine Search
CNC lathe Type: Quick Turn 100 SG Manufacturer: Mazak Year: 2018 Control: Mazatrol SmoothC Max turning diameter: 280 mm Max turning length: 340 mm Max swing over bed: 580 mm Spindle bore: 42 mm Max spindle speed: 6000 rpm X: 200 mm Z: 340 mm Turret: 12 positions Chip conveyor Machine weight: 3200 kg In good condition, under power Find more here - / Contact us at -
Used CNC valve seat processing machine NEWEN EPOC XL. Working range valve seat diameter 13-240 mm. Valve guide working range 4-20 mm. Max. workpiece weight approx. 900 Kg.
With C axis Swing over bed Ø 610 mm Swing over slide Ø 360 mm Distance between centers on tailstock version 682 mm Maximum turning diameter Ø 500 mm Maximum part length 520 mm Maximum bar diameter Ø 65 Travel in X / Z 260 / 610 mm Spindle speed 5000 rpm Number of tool on turret 12 Tool holder type VDI30 Controller FANUC Oi TF
2000 Toshiba BTD-200QF CNC Horizontal Boring Mill Spindle Diameter: 4.33" Extended Quill Diameter: 7.87" Taper In Spindle: #50 Vertical Head Travel, Y-Axis: 39.37" Table Cross Travel, X-Axis: 39.37" Spindle Travel, Z-Axis: 15.74" Saddle Travel, W-Axis: 27.55" Table Size, (2) Pallets: 39.37" x 39.37" Table Capacity: 6,000 lbs Table Indexing: 0.001 Degree Rapid Traverse (X,Y,Z Axes): 472.4 IPM Feed Rates: .04-236.2 IPM Table Load Capacity: 6,600 LBS Spindle Speeds (2 Ranges): 20-3000 RPM Floor Space, L x W x H: 173" x 174" X 126" Machine Weight: 39,600 lbs. -EQUIPPED WITH- Tosnuc 888 CNC Controls 40-Station Automatic Tool Changer (2) 39.37" x 39.37" Pallets with Pallet Shuttle System Thru Spindle Coolant Marposs Probing System Chip Conveyor 30 HP Spindle Motor
CONTROLS electronic controls SIEMENS BASIC FUNCTIONS number of spindles: 6 WORKING RANGE TURNING swing diameter (max): 48 mm turning diameter (max): 48 mm bar diameter (max): 48 mm worpiece length max.: 125 mm MAIN SPINDLE spindle revolutions (min): 180 /min spindle revolutions (max): 2120 /min number of gears: 2 continuous speed variation: no ELECTRICAL SPECIFICATIONS total power consumption: 17.5 kW mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 6130 mm space requirements -front/back-: 1400 mm total weight approx.: 10200 kg Technical Data - Maximum diameter of hexagonal bars: 42 mm - Maximum diameter of square bars: 34 mm - Maximum feed rate: ...
CONTROLS electronic controls SIEMENS BASIC FUNCTIONS number of spindles: 6 WORKING RANGE TURNING swing diameter (max): 48 mm turning diameter (max): 48 mm bar diameter (max): 48 mm MAIN SPINDLE spindle revolutions (min): 180 /min spindle revolutions (max): 2120 /min ELECTRICAL SPECIFICATIONS total power consumption: 17.5 kW mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 6130 mm space requirements -front/back-: 1400 mm total weight approx.: 10200 kg tech. Details - max diameter hexagonal bars 42 mm - max diameter square bars 34 mm - max advancement bars 225 mm - max length shooting 125 mm - max stroke longitudinal carriages 150 mm - Trigger thread head up to approx. M27 - Number of ...
CONTROLS CNC controls BASIC FUNCTIONS number of spindles: 8 WORKING RANGE TURNING bar diameter (max): 32 mm worpiece length max.: 100 mm MAIN SPINDLE spindle revolutions (min): 450 /min spindle revolutions (max): 3250 /min ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 4130 mm space requirements -front/back-: 1600 mm
- Hersteller: HURCO - Model/Typ.: BMC4020HT/M - Baujahr: 1997 - MFG.No.: 029 Verfahrwege: - X-Achse: ~ 1020 mm - Y-Achse: ~ 510 mm - Z-Achse: ~ 610 mm - Steuerung: Ultimax 3 Hauptspindel: - Hauptspindel: max. Drehzahl 8.000 U/min - Hauptspindel Leistung: 15 kW - Werkzeugaufnahme: SK 40 Arbeitstisch: - TischaufmaÃe 1220 x 510 mm - max. Tischbelastung ca. 700 kg - Werkzeugwechsler: - Anzahl der Werkzeugplätze 24 Stück - max. Werkzeugdurchmesser 100mm - max. Werkzeuglänge 300mm - max. Werkstückhöhe 250mm (bei einer Werkzeuglänge von 300mm) - max. Werkzeuggewicht 7,0 kg - Maschinengewicht ca. 5,6 to - Standort: demontiert, am Lager D-32825 Blomberg
Max. working lenghts 3000mm Max working square 220x220mm Max. working diameter 450mm (when wood round) Stroke axis X 3800mm Stroke axis Y 460mm (plus 230, minus 230) Stroke axis Z 510mm Stroke axis Y2 360mm (turning) Stroke axis Y3 360mm (milling) Stroke axis Y4 360mm (sanding) Stroke axis B (rotary +/- 90°) Power: Axis A (rotary main motor) 22,2 kw 0-1500 upm Axis Y2 11kw 1000-4500 upm Axis Y3 11kw 1000-6000 upm Axis Y4 2,2 kw 3000 upm max. 24.000 upm Electrospindle (HSC) 12 kw max. 24.000 upm Toolchanger 6 positions HSK 63 F Total installed power 70 kw Weight approxm. 9,5 tons - Producer Intorex - Type TMC 3000 - Year of construction 2010 - Location Germany
A CNC vertical long-bed machining center Mazak is available. Travel X/Y/Z: 3000mm/800mm/720mm, B-axis: 110°, C-axis: 360°, table diameter: 600mm, long-bed table dimensions X/Y: 3500mm/820mm, max. table load: 2500kg, spindle interface: BT40, speed: 18000rpm, rapid traverse: 50m/min, tool stations: 48, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5250mm/3650mm/3200mm, weight: approx. 16100kg, control: Mazatrol Matrix 2, spindle hours: 18502h. Including rotary table Nikken CNC 601MA, high-pressure coolant, center partition wall, Renishaw probe, touch probe RMP 60Q, CAD/CAM software Topsolid 7.18 and postprocessor. Documentation available. An on-site inspection is possible.
The machine is in good technical condition, testing is possible by prior arrangement.
A defective vertical CNC machining center DMG Mori is available. Travel X/Y/Z: 835mm/510mm/510mm, tool stations: 20, tool holder: SK40, speed: 10000rpm, table dimensions X/Y: 1000mm/560mm, T-slot spacing: 100mm, max. table load: 800kg, table height: 720mm. Control: Heidenhain TNC 530, operating hours: approx. 29836h. Either the pneumatic release cylinder or the spindle is defective. Documentation available. On-site inspection is possible.
A universal machining center is offered with control: Heidenhain TNC 426. Operating hours: approx. 45380h, spindle hours: approx. 14384h. Viewing possible by appointment.
A lathe (Universal Turning Solution) is offered, control: Fanuc, tool turret: 12-station, tailstock, 3-jaw chuck. Tool setting arm: Renishaw HPRA. Inspection is possible by arrangement.
This Hypertherm Powermax 105 Sync XXL plasma cutting system is offered. Table size X/Y/Z: 2500mm/10000mm. Cutting heads: 3. The system can be inspected under power by arrangement.
CNC Lathe TAKISAWA TMM 250 M1 CNC Model nFanuc 2011 CNC Version 31i - Model B Main spindle nose ASA 8 Main spindle power 22 Kw Main spindle bar passage 75 mm Swinnable diameter 350 mm Swinnable length 800 mm Main spindle rpm 4000 Number of Tool Turrets 2 Tool positions first turret 15 Motored positions first turret 15 X axis travel first turret 265 mm Y axis travel first turret + - 50 mm Z axis travel first turret 760 mm Tool positions second turret 15 Motored positions second turret 15 X axis travel second turret 228 mm Z axis travel second turret 760 mm Rapid traverses X Y Z 30 m/min High pressure coolant yes Counterspindle yes Nose spindle ASA 6 Counterspindle rpm 4000 Counter spindle power 18.5 Kw Counter spindle Z travel 800 mm The machine is visible operating in our warehouse in Gussago BS. Mimu machine tools
CNC portal milling machine TYPE: LF3550/4000CS Year of manufacture: 1966 / overhauled 2010 Manufacturer: Waldrich Siegen Control: CNC840D-Powerline Routes: X-axis 14,000mm table longitudinal Y-axis 4.480mm slider-transverse Z-axis 3,000mm crossbeam vertical W-Axis 300mm Quill Vertical Max. Passage: transverse 3.200mm high 3.800mm Machine table: Length 14.770mm Width 3,100mm max. table load: 145 to Quill: Tool Taper: ISO60 Power: 100KW Max. torque: max. speed 600 rpm Rapid traverses: X-axis 12m/min Y; Z-axis 6m/min Attachment heads: Voltage: manual Description: Right angle milling head (ISO60) Orthogonal milling head (ISO60) Notes: Table guide hydrostatic
TRUMPF TruLaser 5040 6kW laser cutting machine was built in 2012 in Germany by TRUMPF Maschinen Grüsch AG. The machine has been continuously serviced, upgraded and maintained throughout its service life. A set of quartz tubes, all internal optics and the lamp were replaced in September 2022. A cleaning and calibration of the external optics, meanwhile, was performed in September 2025. All filters and oils were changed on an ongoing basis according to TRUMPF recommendations. Water was changed once a year, along with flushing of the CU and AL circuits. All these activities are confirmed by the corresponding service reports. The TRUMPF TruLaser 5040 (L18) laser cutting machine is the perfect choice for any industrial plant. It enables precision cutting of sheet metal made from, among others, steel, aluminium, copper and brass. Laser cutting is performed by means of a stable 6 kW laser b ...
CINCINNATI MILACRON DART 750 CNC vertical machining center was built in 1999 in the UK by Cincinnati Milacron U.K. Limited. The machine, designed for machining workpieces with a maximum weight of 455 kg, is distinguished by its outstanding precision, efficiency and reliability. The machining process is performed on a large work table with a length of 950 mm and a width of 520 mm, by means of a high-speed spindle and cutting tools taken from a 21-position magazine. High process stability, even during the most intensive challenges, is in turn ensured by an extremely rigid design made of top-quality steel. All this is completed by a CNC controller with dialogue programming. The CINCINNATI MILACRON DART 750 CNC machining center weighs approximately 3500 kg. Technical specifications of the CINCINNATI MILACRON DART 750 CNC milling machine - CNC controller: ACRAMATIC 2100 - number of axes: ...
AMADA LC-1212 ALPHA III laser cutting machine was built in 1999 in Japan by AMADA CO., LTD. The machine is used for precision machining of sheet metal with a maximum weight of 220 kg. Laser cutting is performed by means of a stable 2 kW laser beam, which guarantees the achievement of extremely smooth edges with no irregularities. All this is complemented by an advanced NC control and a laser source of the highest energy efficiency. The AMADA LC 1212 A3 laser cutting machine weighs 4500 kg. Technical specifications of the AMADA LC-1212 ALPHA III laser - laser power: 2 kW - number of axes: 3 (X,Y,Z) - feed in the X/Y/Z axis: 1270/1270/300 mm - rapid traverse in the X/Y/Z axis: 80/80/60 m/min - working speed: 20 m/min - maximum sheet metal dimensions (L x W): 2540 x 1270 mm - maximum sheet metal weight: 220 kg - work table height: 820 mm - positioning accuracy: ± 0.01 mm - pos ...
MICROSTEP MSF-Pipe-T 6501.200L tube and profile fiber laser was built in 2018 in Slovakia by MicroStep spol. S.r.o. The machine, which is designed for precision cutting of tubes and profiles of various cross-sections and non-standard shapes, is an excellent choice for modern business. This is because a number of state-of-the-art technical solutions guarantee the most accurate cutting results throughout its entire service life. 2D or 3D cutting is performed by means of a stable 2 kW fibre optic beam, which is generated by a resonator of the highest energy efficiency. The 3D laser scanner accurately measures the workpiece before machining to determine its actual shape along the cutting trajectory. Advanced algorithms then allow the control system to appropriately adjust the movement of the cutting tool and supports, as well as compensate any workpiece inaccuracies. The work area is c ...
WE SELL AN NICE WORKING CONDITION HURCOP -BMC-30 CNC Vertical Machining Center HURCO BMC 30/M Year of manufacture: 1998 CNC path control Ultimax X: 760 mm, Y: 460 mm, Z: 610 mm Table: 1010 x 400 mm Spindle mount: SK 40 Distance spindle nose - table: 150 - 760 mm Overhang: 450 mm Spindle speed: 80 to 8000 rpm, stepless Rapid traverse: 24 m/min Spindle drive: 7.5 kW at 30min / 5.5 kW at 100% Electrical connection: 400 Volt, 50 Hz - CNC path control Ultimax (with hardware update, e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw - Tool changer with 24 tool positions - Full enclosure / sliding door - Swivel operating panel - Pneumatic/mechanical tool clamping Dimensions (L x W x H): 3400 x 2400 x 2550 mm Weight: approx. 4,800 kg ...
Key data: 316 mm, 340 mm
CNC LATHE FOR GENERAL PURPOSE TURNING
Key data: 380 mm, 1100 mm
For sale; Victor CNC lathe type VTurn26 with driven tools equipped with a Fanuc 0i-T control. Maximum turning diameter is 380 mm. Turning diameter top bed is 520 mm. Maximum turning length is 1.100 mm. Maximum speed is 3.500 rpm. Main motor power 15/18.5 kW. All tool holders remain with the machine. All books are available.
A CNC lathe Gildemeister is available. Swing diameter over bed/face slide: 600mm/360mm, bed dimensions X/Y: 350mm/450mm, carriage length: 620mm, carriage width: 250mm, facing travel: 1100mm, chuck diameter: 315mm, spindle bore: 107mm, spindle diameter: 140mm, spindle power: 30kW, torque: 950Nm, speed: 3150rpm, rapid traverse X/Z: 10m/min/5m/min. Quill diameter: 100mm, quill stroke: 180mm, max. tailstock pressure: 1200daN, turning length: 1000mm. Machine dimensions X/Y/Z: approx. 4350mm/2050mm/2000mm, weight: approx. 6400kg, operating hours: 49811h. Documentation available. An on-site inspection is possible.
A complete manufacturing cell with four horizontal machining centers Makino and a pallet storage and transport system is available. Makino A55: Travels X/Y/Z: 560mm/560mm/600mm, pallet dimensions X/Y: 400mm/400mm, max. table load: 500kg, max. workpiece diameter: 630mm, max. workpiece height: 1000mm, rapid traverse: 84m/min. Complete system dimensions: approx. 24000mm/8000mm, weight: approx. 8500kg. The images and videos show an identical system. The configuration of the offered and the illustrated cells is essentially identical. Documentation available. On-site inspection is possible.
WAFO VS-8 SMART CNC machining center was built in 2022 in Poland by Warszawska Fabryka Obrabiarek WAFO Sp. z o.o. The machine was used occasionally and has worked a small number of hours. The WAFO VS-8 SMART is an excellent choice for both unit and small batch production of precision parts. The machine with its compact design is distinguished by carefully selected components with the best technical parameters, which guarantee outstanding performance over its entire service life. Workpieces with a maximum weight of 150 kg are machined inside a fully enclosed cabin by means of a high-speed spindle and cutting tools taken from a 20-position magazine. Process stability, on the other hand, is ensured by an extremely rigid bed, which eliminates any vibration and oscillation on an ongoing basis. All this is complemented by the extremely easy-to-use SIEMENS CNC control with ShopMill overlay a ...
FEHLMANN PICOMAX 54 CNC milling machine was built in 2010 in Switzerland by FEHLMANN AG. This is an exceptionally efficient, multi-tasking machine that is ideal for processes requiring extreme precision. The machining processes, i.e. milling, drilling and threading, are performed inside a large workspace by means of a reliable high-speed spindle. In order to achieve high feed repeatability, all axes are equipped with special measuring systems, consisting of measuring scales and encoders. The open design, in turn, ensures free access to the workpiece. All this is complemented by the easy-to-use HEIDENHAIN CNC control with many useful functions. The FEHLMANN PICOMAX 54 drilling and milling machine weighs 2150 kg. Technical specifications of the FEHLMANN PICOMAX 54 CNC machining center - number of axes: 4 (X,Y,Z,W) - feed in the X/Y/Z/W axis: 500/260/160/480 mm - feed rate in the X,Y ...
For sale Emco CNC double spindle lathe type Hyperturn 45. A very complete CNC lathe with left and right spindle, as well as an upper and lower turret. Both turrets have driven tool positions! The upper turret also has a Y-axis with 70 mm travel. Tool holder attachment VDI25, rod capacity left spindle is Ø 45 mm, maximum speed 7,000 rpm. Maximum diameter is Ø 300 mm. Maximum part diameter is 480 mm. The distance between the two spindles is 720 mm. Fanuc 18i-TB control. The machine is equipped with high pressure pump, chip conveyor with right ejection, parts catcher, manual collet devices, etc. Available from stock, subject to prior sale. The machine has a light layer of soot. This can be easily removed.
Biesse cnc controlled nesting machining center Rover 35 XL Version 2 Electric milling spindle A Electric milling spindle B Drilling unit 28 drilling spindles Working area 6 x 1.55 (1.65) m
Key data: 480 mm, 2000 mm, 3050 1/min
Stock number: 4009 CNC LATHE Manufacturer: Gildemeister , Type: CTX 600 Machines NO.: 361238, Year of manufacture: 1997 Specifications: Max. circumferential diameter 480 mm dia. Max. turn. About Bed 650 mm Dia. Turning length 2000 mm Main motor power 27 kw Main spindle speed range 4-3050 rpm Tool turret with 12 stations Powered stations revolver 1 6 pieces. Control Gildemaister EPL Fabr. Accessories: Hydr. Chuck main spindle 400 mm dia Tool holder vdi 50 Driving angle tools 2 pieces Driving Tools Straight 2 pcs. Various tool holders. 15 Chip conveyance. Cooling water system. Length: 4000 mm, Height: 2100 mm, Width: 2500 mm, Weight: 9100 kg
scm Busellato cnc machining center with console tables Cantilever center with front open beam Drilling unit with 19 tools for vertical and horizontal drilling and in the X direction of the sawing unit Rear and front stops on the consoles Safety system via bumper (without carpets and barriers) Linear tool changer with 11 places on the machine stand Linear tool changer with 14 places on the cantilever (boom) Processing field X Y Z 3115 x 1320 x 180 Throughput in Z 1880 mm JET ELITE P4/13 CE VERSION V 400/50 mobile control element with 7
WORKING AREA 3200 x 2100 mm, X and Z axis 200 mm SPEED X and Y AXIS 70 m/min, Z axis 20 m/min ISAC ITALIA CONTROL 21.5-INCH TFT COLOR SCREEN GRID-ENABLED CONTROL WITH ETHERNET AND USB CONNECTION - 9 kW ISO 30 COPDLE - 9-SPINDLE DRILLING UNIT - LAUNCH MANAGEMENT DRILL - 8-POSITION TOOL CHANGE - 2 vacuum pumps (250 m3/h) - 6 vacuum zones - Loading and lifting unit - Final cleaning unit for slabs - Conveyor belt unit for unloading workpieces - Alpha CAM CAD/CAM software - Alpha Software Cam xNesting - Security barriers to protect against unauthorized access
Offered is a CNC lathe (sub-spindle, milling/C-axis, Y-axis). Equipped with bar feeder for balls 120mm, incl. Fanuc six-axis robot M-16iB with R-30iA control for automated loading and unloading as well as a bunker for raw material supply. Machine is operational. Inspection possible by prior arrangement.
Milling machine Micron VCP 800 Heidenhain TNC 426 Year of manufacture 1999 Table size 1050 x 590 X 800 / Y 450 / Z 450 Maximum speed 20,000 RPM Maximum table load 400 kg Machine weight 6,500 kg Machine size 3,200 x 3,200 x 2,800 mm Spindle holder: HSK-63A Magazine slots: 30 Tool changers, all places have been renewed and adjusted. X-axis spindle replaced Without tools and vices
Number of spindles: 6, max. bar capacity: 42mm, max. machining diameter: 42mm, speed: 5000rpm, machining slides: 4, number of slides front/rear: 4/2. Machine dimensions X/Y/Z: approx. 7200mm/1700mm/2300mm, weight: approx. 10000kg. The machine has an electrical problem as a result of which the control does not start up. Documentation available. On site inspection is possible.
Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts.
A CNC laser cutting system Trumpf including RotoLas and Liftmaster is available. Laser source: TruFlow 5000, laser type: CO2 laser, laser power: 5000W, travel X/Y/Z: 3000mm/1500mm/115mm, max. material thickness structural steel/stainless steel/aluminium: 25mm/25mm/15mm, positioning accuracy: +/-0.1mm, repeatability: +/-0.03mm, max. axis speed: 200m/min, max. simultaneous speed: 300m/min. Machine dimensions X/Y/Z: approx. 11100mm/4600mm/2400mm, weight: approx. 12000kg, operating hours: 55462h, laser hours: 24430h, beam hours: 12742h. Hours status as of 01/2026. Documentation available. On-site inspection is possible. Expected to be available from January 2027.
Milling machine Manufacturer: Quaser Type: MV 184P/12B Year of manufacture: 2011
Milling machine DMG DMU 100t BJ 2003 more technical data and more pictures on request
Milling machine Hurco VMX24 • Travel (X/Y/Z): 610 mm / 510 mm / 610 mm. • Table size: Approx. 760 x 510 mm. • Tool holder: SK40. • Tool changer: 24 places (side-mounted). • Spindle speed: Up to 12,000 rpm • Rapid traverse: Approx. 30-35 m/min (X/Y/Z). • Control: Hurco WinMax 6 1 shift operation May 2018 new spindle from 15,000 to 12,000 Replacement Monitor 30 cm Torisan TM121SV-02L01 LCD TFT available (subject to functionality) without tools and vices Perforated plate included
A cycle-controlled CNC lathe Gildemeister is available. Center distance: 1500mm, max. turning length: 1500mm, swing diameter over bed/cross slide: 500mm/290mm, speed: 2800rpm, spindle bore: 70mm, spindle torque: 1050Nm, travel X/Z: 260mm/1600mm, rapid traverse X/Z: 6m/8m/min, feed rate: 5m/min, feed force: 5kN, tailstock quill stroke: 180mm, tailstock quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3200mm/1800mm/1900mm, weight: approx. 3100kg, operating hours: 79727h. Documentation available. On-site inspection is possible.
Workpiece diameter with/without steady rest: 400mm/250mm, max. workpiece length: 750mm, spindle head load: 400kg, max. internal grinding diameter: 350mm, max. grinding depth: 500mm, travel X/Z: 300mm/1000mm, max. traverse speed: 15m/min, control system: Siemens Sinumerik. Documentation available. On-site inspection is possible.
General Manufacturer: Spinner Type: TC800-110-MCY Year of Make: 2009 Control: Siemens 840D SolutionLine Travel: X 360 mm Z 900 mm Y -55/+65 mm Switch-on hours: 22,551 h Working spindle Speed: 3,200 rpm Power: 28/35 kW Torque: 175/875 Nm Tool/movement Tool holder: VDI40 Tool turret: 16-speed Condition Condition: Used Functional: tested and fully functional Other equipment and accessories included: C-axis for spindle incl. software option "Transmit" Hydraulic hollow clamping cylinder Electrical interface for connecting rod feeds 840D-SL Software Package "Turning with Shoturn" Tool monitoring 840D-SL 3D Simulation of the Precast Part Tailstock Chip conveyor High Pressure Pump Double filter Mahle Parts catcher V2 TC800 Clamping force control via differential pressure for main spindle
1. Machine manufacturer: UNITECH 2. Machine Type: CFS 2 3. Year of construction: 2001 4. Condition: used 5. Control type: Heidenhain TNC 410N 6. Design (vertical / horizontal / portal / 5-axis): Travelling column 3 - axle 7. Travel (X / Y / Z) in mm: 1500 x 300 x 315 8. Table size: 1800 x 350 9. Spindle power and speed: 6000 10. Tool holder: SK40 11. Equipment: Internal cooling 12. Accessories: Chip conveyor
Travel X/Y/Z: 600mm/700mm/800mm, resolution: 0.001mm, input resolution: 0.001mm, positioning tolerance: 0.01mm, feed rate: 15m/min, rapid traverse: 40m/min, speed: 18000rpm, power: 31kW, control: Heidenhain MillPlus. Documentation available. On-site inspection is possible.
TRAUB TNM 28 sliding head lathe was built in Germany by TRAUB Drehmaschinen GmbH. The machine, which is distinguished by its high efficiency, is the perfect choice for precise, multi-axis machining of workpieces with a maximum length of 200 mm. All machining processes, i.e. drilling, threading and turning, are performed fully automatically inside a large work space. In order to obtain excellent repeatability of the manufactured parts, the TRAUB TNM is equipped with components of the best technical parameters, i.e. two reliable spindles and an 8-position turret. All this is complemented by an easy-to-use CNC controller with many useful functions. The TRAUB TNM 28 CNC automatic lathe weighs approximately 3000 kg. Technical specifications of the TRAUB TNM 28 CNC turning center - feed in the X/Z axis: 60/200 mm - rapid traverse in the X/X2/Z axis: 15/15/30 m/min - driven tool rotationa ...
maximum number of results exceeded
please refine your search
