wind power used for sale

Sink mixer VILLEROY & BOCH Como Window, model 925700, original packaging

Description: For drilling of glazing bars and frames, door components and sash joints 10 different drilling programmes Drilling head with 2 spindles Drilling stroke: max 80 mm Pneumatic workpiece hold-down device Right and left length stop  , drilling units horizontal: 1 pieces, packing measure approx (l x w x h): 1,300 x 1,400 x 1,650 mm, Approx. Onsite Dimension. (l x w x h): 6,000 x 1,400 x 1,600 mm, weight approx.: 400 kg

Polin oven, model: WIND 4060/5, number: 805155/AA/1385, year of construction: 1998, 220 V, 3 Ph, 50 Hz, 5 floors, floor dimensions: (5x) 400 mm x 600 mm, total dimensions: 800 mm x 1330 mm x 1800 mm.

Window rebate pocket for GUK FA30 / 50 / 54 / 74 / K50 / K54 / K74 used

Description: Window machining tool set weight approx.: 20 kg, Approx. Onsite Dimension. (l x w x h): 800 x 600 x 600 mm

Overview The winder was manufactured in 2017 by the Spanish manufacturer movitec. It is in operation until the end of September 2023 and can be visited at any time.  Technical data  Max. 120 pallets/ h (with 10 wraps) Dimensions (LxWxH): 5240mm x 3825mm x 4184mm Weight: 2.000kg  Foil width: 500mm  Main frame made of steel  Rotating ring with unwinding device for prestretch film Motorized prestretch system Cutting and welding system Scope of delivery  Protective fence  Winder | Movitec | Saturn S6 | 2017 Compressor | Josval | EDS-900 | 2016

Description: The almost new 8 MW transmission test station is operated from a central control station. Some of the test energy input can be fed back into the power network. Inventory number: 9000945 , Year of construction: 2018 Data on the three-phase asynchronous machines Nominal output: 7.7MW Maximum output: 8.47MW Nominal speed: 1150/min Maximum speed: 2200/min Nominal torque: 63940 Nm Maximum torque: 70330 Nm Main shaft data Nominal speed: 8.99 rpm Nominal torque: 6000kNm Maximum torque: 8800kNm Cooling system Cooling capacity of the cooling tower: 900kW Coolant volume flow: 160m³/h at 4 bar and 30°C Nominal pressure hydraulics Hydraulic system main shaft: 250 bar at 100 l/min Hydraulic system quick coupling: 300 bar at 1 l/min Hydraulic system generator (lifting/lowering) 150 bar at 8 l/min Oil system: 8 bar at 120 l/min General data Operati ...

Description: Manual available at this LINK Minimum working size 40 x 25 mm Maximum working size 200 x 105 mm Working length 200 - 3500 mm X1 Axis Stroke: 6120 mm X2 Axis Stroke: 6120 mm X3 Axis Stroke: 6200 mm X4 Axis Stroke: 6200 mm CU Axis Stroke: 1620 mm Y1 Axis Stroke: 4000 mm Y2 Axis Stroke: 4000 mm Y3 Axis Stroke: 4000 mm Z1 Axis Stroke: 440 mm Z2 Axis Stroke: 440 mm Z3 Axis Stroke: 620 mm V1 Axis Stroke: 1100 mm V2 Axis Stroke: 1100 mm1 W Axis Stroke: 230 mm A Axis Stroke: 180° C Axis Stroke: 360° SP1 Spindle Power: 14 kW SP2 Spindle Power: 14 kW SP3 Spindle Power: 12 kW Tool changer magazine with 62 positions Max tool diameter 200 mm Tool attachment HSK 63 Blade group power 2.2 kW Blade diameter 200 mm Total power 55 kilowatts SINUMERIK HMI control WARNING! Belts, elastic bands, and photocells of loading and transfer systems require maintenance. ...

Description:  , GENERAL MACHINE DESCRIPTION: A. Roller Conveyor for cell entry B. Machine for aluminium adhesive tape winding and cutting. C. Nr. 2 machines for butile adhesive tape application, tube and polietilene adhesive tape wrapping around and for aluminium tube end cutting. D. Machine for aluminum tube coining. E. Machine for internal tube diameter calibration on one or both ends. F. Pick-up for cell moving on single machines or from machines to roller conveyors. G. Conveyor for worked cells unloading.  , DIMENSIONS OF CELLS  , This sytem is projected to work cells type: COMBI BOTTOM and COMBI TOP.  , NOTE: Machine is not under power, already dismantled. Approx. Onsite Dimension. (l x w x h): 15,000 x 15,000 x 6,000 mm, weight approx.: 50,000 kg

Two identical fully automatic winding machines are available. Both were overhauled by the manufacturer 4 years ago. max. linear mechanical speed: 35m/s, max. compressed air pressure: 7bar. Material to be processed: welding and staple wire, max. tensile strength: 1600N/mm². Wire diameter: 0.8 - 1.0 - 1.2mm, tolerance on max. diameter: 0.05mm. Support: K300 - D300, weight of spools/wire baskets: 15 - 18 - 20kg, weight: approx. 3000kg, mit Dokumentation.

A window and door production line with 7 machines is available. 1) 1.1) HT line: Horizontal four-head welding machine (HSM) Stürtz, year of construction: 2019. 1.2) 2 MC - 1 head cleaner Stürtz with tool carrier top and bottom, year of construction: 2009. Add-ons for frames and sashes, profile type: Veka, installation depths: 70mm/76mm/82mm/116mm, max. size: approx. 2600mm/4000mm. 2) HFL Kruba milling machine: 3-axis milling machine, year of manufacture: 2011. 3) Rotox GZS glazing bead saw, year of manufacture: 2011. 2000 pieces in 8 hours. With 10-pair loading magazine (corresponds to 20 glazing beads) and 20-pair automatic removal table (corresponds to 40 cut glazing beads). 4) Series line: 4.1) & 4.2) Vertical four-head welding machine Stürtz VSM-20/VSM26-Turbo with handling system, year of manufacture: 2019. 4.3) Horizontal four-head plastering machine Stürtz MC-H4K-30/26, year o ...

Power supply Siemens 6EP1437-1SL11

We sell a used natural gas cogeneration manufacturer spilling, type power Therm with an electrical output of 20 kW.

TO WHOM IT MAY CONCERN; WE VE 6 PCS USED WOODWARD REAL POWER SENSORS AND 2 PCS DIGITAL REFERENCE UNITS AT OUR STOCK. WE DISMANTLED THOSE CARDS FROM RUNNING SYSTEM. PLS FIND DETAIL PART NO 8272 - 843 REVISION A 6PCS PART NO 8272 - 683 REVISION R 2PCS ALL PANELS LOCATED IZMIR TURKEY . READY TO SHIPMENT. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba Best Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Power converter -Type: Sitop power 40 -Input: 3AC 400 V -Output: DC 24 V/20 A -Dimensions: 260/180/H170 mm -Price: per piece -Number: 1x available -Weight: 6.7 kg

Power converter, power supply, power pack, switching power supply, power supply -Manufacturer: Siemens, power supply Sitop Power 20 -Type: 6EP1436-3BA00 -Number: 3x available -Price per piece -Dimensions: 160/125/H125 mm -Weight: 2.1kg/pcs

Power supply, converter, converter, power supply unit -Type: AS-i Power Supply AC1218 -Output: DC30.5V/8A -Number: 11x power supplies available -Price: per piece -Dimensions: 125/90/H110 mm -Weight: 0.9 kg

Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, dual power supply -Manufacturer: ifm electronic, dual power supply -Type: AC1212 -Number: 1x module available -Price per piece -Dimension: 120/110/H135 mm -Weight: 1 kg/pc.

Power supply unit, converter, power supply, switching power supply, DIN rail power supply -Manufacturer: B&R, Power Supply PS3200 -Input: 3 AC 400-500 V -Output: 24 V/20 A -Dimension box: 280/180/H130 mm -Weight: 2.1 kg

Power supply, converter, converter, power supply unit -Type: AS-i Power Supply AC1218 -Input: 3AC 400 V -Output: DC30.5V/8A -Number: 4x power supplies available -Price: per piece -Dimensions: 125/90/H110 mm -Weight: 0.9 kg

Converter, power supply, power supply unit -Manufacturer: Siemens -Sitop Power 10/6EP1 334-2BA00 -Number: 2x available -Price: per piece -Dimensions: 135/100 / H130 mm -Weight: 1.2 kg/piece

Prima Industria laser in perfect working order, on sale because of transfer to a new machine. Prima Power Platino CP 3000 Co2 model. Cutting bench 3000x1500 mm. Perfectly cuts iron up to 15 mm and stainless steel up to 10 mm. Machine overhauled by Prima Industria therefore super safe. Possibility of any test and in case start-up support with training. General check carried out by Prima Industria technicians before sale.

Powerweld Laser Welding machine powered by Trumpf HL204P/4 - laser suitable for welding metal parts - the laser is in very good conditions - possible to operate by programming CNC system - even for series or prototype work - visually control by the camera to monitor - fully working - possible to be checked or shown - one station is possessed by Powereweld but can be upgraded to 4 laser welding station (HL204/4) - ID 90-01-59-00 - year of manufacturing 2002 HL204P/4: - LCB - ID 20-03-07-00 - - year of manufacturing 2002

Cat.-Nr. 10-1460 in a very good condition Tecnical Details: Production Capacity: 40 boxes/minute Year of Construction: 2008 6 Cups/Tray = 240 Cups/Minute = 14.400 Cups/h each Cup 125 g Measurements: Packing Sizes – LxWxH: 698,5x168,0x1,5 mm Lid – LxDxH: 95,5x95,5x9,0 mm Cup – DxH: 92,5x42,0 mm Machine Measurements: LxWxH: 7500x7400x3000 mm Weight: approx. 6800 kg Operating Instructions available Original Price: Euro 655.000,00 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

12 cylinder diesel engine SACM-AGO, Jeumont cutter generator AC630 L4, 2,500 KVA, water-cooled, incl. control cabinets, incl. 4 large fans, incl. additional parts 1 unit complete and 1 piece (not complete) additionally as spare part carrier Year of construction is estimated

1 of used TRANSVER 180-degree Powered Belt Bend - oversized, type KR1-SP, new 1993. Operates counter-clockwise. Outside radius of frame 2.154 mm, end rollers diameter 14 + 50 mm. Conveyance height 1.250 mm (± 50 mm), inside radius of belt 1.104 mm. Belt width 800 mm. Belt speed at radius 1.504 mm 30 m/min. With SEW Variomot drive, 380V/50Hz. Color RAL 1015 bright ivory.

Powered role way with built-in Abziehquerfoerderer technical data: intended purpose: Boards length: 1 m rope number: 6 pieces impulse 1.5 kW

PSU Board NSV 56 (Grundig 44206-860.02) (Sparepart for NSV 52, NSV 54, NSV 55, NSV 56) inkl. 1 Year Warranty Exchangeprice 595,-€ with Exchange 695,-€ Dialog 1attached NSV 52 ( Grundig Nr. 9.44904-1703 FD-Nr. 6006 04 100657) Dialog 2 attached NSV 54 ( Grundig Nr. 9.44904-1203 FD-Nr. 6006 04 100678) Dialog 3 attached NSV 55 ( Grundig Nr. 9.44904-1909 FD-Nr. 6006 04 100687) Dialog 4 attached NSV 56 ( Grundig Nr. 44206-860.02 FD-Nr. 6006 04 100687 01) Contour 1 attached NSV 55 ( Grundig Nr. 9.44904-1909 FD-Nr. 6006 04 100687) Contour 2 attached NSV 55 ( Grundig Nr. 9.44904-1909 FD-Nr. 6006 04 100687) Contour 3 attached NSV 56 ( Grundig Nr. 44206-860.02 FD-Nr. 6006 04 100687 01) Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitor ...

ABB Arc Guard TVOC-2-240 Arc Flash Guard COMPLETE SET Built 2012 The new retail value for these parts is Euro 8500,- Like new, only been used for 3 years. 6x complete set available. -- TVOC-2-240 - ABB TVOC-2-240, ARC MONITOR W/HMI, 100-240VAC/DC The Arc Guard TVOC-2 builds on the well-appreciated TVOC design and offers unmatched arc monitoring. With over 35 years of experience, Arc Guard System has become an industry standard in several key markets, helping to protect personnel and businesses around the world. The TVOC-2 is an optical detection system that together with an external breaker can limit the damage done to personnel and equipment in case of an arc accident happening. Main benefits Increased safety to personnel and equipment Minimizes downtime after arc accident has happened Easy-to-read interface makes reading status information quick and easy Simp ...

Hydraulic pump 250 BAR 1, 1kW three phase motor, 3ccm/& 8 l container with valves and tray, ready for use. Info under 0170 / 2204056 Mail to fa.raupp@t-online

Energy chain including covers, closed, can be opened. Black dimensions 75 x 55. Unused mint condition! 10 mtr. present a ´ mtr. 29.-NET Very high quality see photos! 0170 / 2204056 Info Mail fa.raupp@t-online

Sell used hydraulic power units 5. 3 with 11 kW electric motor- 2 with 4 kW electric motor- Price per PCs. Motors from ASEA Sweden

PCA Senertec heating oil system used with 32000 hours of operation System until the very end in operation Regulator in MSR1 Performance increase Power 5,3 kW thermal power 10,5 kW

CHP 60kW of electric power with approx. 108kW of thermal performance Compact system with enclosure and Cabinet mounted on the system. incl. power factor correction and emergency cooler.

Piston diesel operation - almost new

Power supply ABB PS24-Ex SA910S new, original packed Manufacturer: ABB Type: PS24-Ex, SA910S Attention! We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device does not work within 3 months after purchase you can return the goods and we will refund the purchase price.

technical data

no further information

Qty. 1 Second-hand power plant including boiler (BFB – boiler: bubbling fluidized bed) Mfc.: Foster Wheeler, Siemens, Raumaster, YIT Corporation, Honeywell, Built: 2001, 2002, 2006, 2009 Revision: 2009 Insulation removed in 2018 BFB Boiler – 88 MW Steam turbine – 22.5 MW Main Steam Cycle BFB boiler K7 – Some parts removed and storaged indoor at the paper mill area – Boiler is made electrically safe (cables cut) – Dry conservation ongoing since 2014 (tubes filled with nitrogen, dry air circulation) – Steam Turbine VP4 (in storage) Generator (in storage) Power Plant – Function Primary function is to produce steam for the Paper Mill reliable and economically Secondary functions: Burning of the Paper Mills (PM) waste wood Incineration of sludge from the PM: WWTP Production of flue gas to the PCC (precipitated calcium carbonate) plant Electricity product ...

Plasma cutting system / power source Manufacturer: Kjellberg Type: PA-S47 CNC Year of construction: 1994 Cutting power: 40-130 A Quality section: 35 mm Cut: 45 mm Gas console: PV-S75W-1 without hose package .

Manufacturer: Solar Turbines INC, San Diego USA Model: Taurus 60 with Solonox combustion, Packager: Turbomach Version: T 7301 Yoc package: 1998 Turbine engine: new engine installed in 2012, only few hours since installation Condition: fully serviced and ready for start. Capacity: 5200 kW Speed: 14.944 U/min continual Fuel: Natural Gas and Light Diesel (dual fuel) Fuel consumption: 122.469 kJ/kWh Burners: 12 Start system: electro.hydraulic, 90 kW Outlet temperature: 486°C Exhaust gas: 21.244 kg/s

Post driven tools from a Traub CNC lathe VDI 40 As well as some measuring geraete for Traub Rest according to photos Special price

Number of wheels(pcs)-4 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Video: abcs://youtu.be/NwSQ6DHySrU

- with power take-off drive 540 rpm without universal shaft capacity 6 m³/h dimensions: length 1 225 mm width 785 mm height 1 400 mm weight 220 kg material steel varnished discharge height 550 mm discharge connection diameter Ø 160 mm suitable for all sorts of straw scope of delivery screen 22 mm perforation ; new machine - top condition

Wheel diameter 120 mm Wheel width 60 mm Wheel diametre hole 35 mm

Type V-380 Number of wheels(pcs)-3 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Video abcs://youtu.be/xZFPl9-vHtg

Type V-180 Number of wheels(pcs) 1 Wheels diameter 200 mm Wheels width 40 mm Feeding rate 0,9¬21,2 (A25B40) Motor power 0,75 kW Machine frame - Cast aluminum Transport dimensions 632x332x222 mm Weight 20,1 kg Video: abcs://abc.youtube.com/watch?v=dfsFa6y4sv0&feature=youtu.be

Carrying ability: max. 2,000 kg. Coil Inner Drm. max. 1,000 mm Coil Outdoor Drm. max. 1,200 mm Coil Width: max. 500 mm; ready for use

We offer as follows: 2 pieces Jenbacher CHP type JMS 316 GS-C21 Generator: inchAVKinch 1110 kVA Technical data: Engine power approx. 1922kW electrical power: approx. 736kW electrical efficiency approx. 38.3% Thermal power: approx. 912 kW Thermal efficiency: approx. 46.9% Built: 2000 The plants sing needed. The sale is subject to any warranty.