126,674 used machines on RESALE, but how to find them? Machine Search
Operation has not been tested. Auction-ID: A1-41994-95
Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels – ...
Key data: 5000 mm, 1600 mm
Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels – ...
Grinder Mill with Blades for Sale Brand: Prat Cutting Chamber: 500x320 mm Closed Rotor Without: Motor, Electrical Panel and Hopper For more details or to make an enquiry, please contact us.
Axis:XYZ (3-axis) Max. travel:950x500x450 Tool:SK-40 Control:HEIDENHAIN ITNC 530
Axis:XYZ (3-axis) Max. travel: 500x450x400 Tool:CAT-50 Control:SEICOS A10M Dimensions: 3180x2200x2500mm
This is an unused product, large input jaw Auction-ID: A1-43992-111
Table size mm 320×1320 Table turning (left – right) degree 45° Travels, X/Y/Z mm 950/320/460 Spindle taper ISO 50 Number of speeds 18 Spindle speed range rpm 40÷2000 Longitudinal and cross feeds range mm/min 12,5÷630 Vertical feeds range mm/min 5÷262 Main motor power kW 7,5 Overall dimensions mm 1747×2050×1780 Weight kg 2850
Miller Maxstar 200 TIG Welding Machine; TIG version. Auction-ID: A1-45170-44
Year: 2016 - technically efficient, ready to work - after full service - spindle 2.2 kW - axis movement range: X – 2675 mm, Y – 355 mm, Z – 224 mm - pneumatic rotary table A: -90° / 0° / +90° - 4 pneumatic clamps - magazine for 6 tools - automatic quick tool change system - cooling and lubrication installation - operator panel, Windows 7 with online access - protective cabin - weight 1400 kg, dimensions: 3600 x 1660 x 1900 mm
x-travel:600 mm y-travel:500 mm z-travel:450 mm weight of the machine ca.:3,5 t
x-travel:1000 mm y-travel:320 mm z-travel:400 mm Table dimensions:1000 x 400 mm
Offer 24245 Specifications: - Feed of the milling unit pneumatically - Work table adjustable in height via handwheel - Horizontal and vertical material tension - Milling cutter diameter up to 300 mm - Max. profile height 190 mm - Max. milling depth 110 mm - Max. milling length 400 mm - Angle-adjustable stop Li + Re 20 90 20 ° - Milling spindle speed 2800 rpm - Drive 400 V / 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle approx. 10 l - ELGO digital display for material cross fence - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1100 x H 1500 x D 700 mm - Weight approx. 300 kg
DMG MORI SEIKI DMC 635 V Ecoline CNC machining center was built in 2013. The machine, designed for precision machining of workpieces, is distinguished by its extremely stable construction made of high-quality cast iron, which perfectly dampens any vibrations and oscillations. To achieve the highest precision and accuracy, reliable components in the form of cutting tools and a high-speed spindle are used in the machining process. Tools are changed in a very short time, so that the overall milling time is significantly reduced. The DMG DMC 635 V ECO CNC vertical machining center is offered with a modern touchscreen control panel and integrated chip conveyor. To this date, the machine has only worked for 9069 hours. The DMC 635 V ECOLINE milling center weighs 3900 kg. Technical specifications of the CNC milling machine DMC 635 V ECO - number of axes: 3 (X,Y,Z) - feed in the X/Y/Z ax ...
Horizontal Boring Machine CORNAC C100 Travel X: 1000 mm Travel Y: 1000 mm Travel Z: 1260 mm ixed table Cone SA 50 Spindle: Ø 100 mm Spindle exit: 550 mm Rotation: from 10 to 1250 RPM Table size: 1550 x 980 mm Surfacing plate: Ø 520 mm Spindle motor: 9,5 kW Scale 3 axes HEIDENHAIN Automatic Feeds: X - Y - Z Supplied with a set of cones Voltage: 380 V Dimensions (L x W x H): 4500 x 2100 x 2450 mm Weight: approx 8 T
Collet set 15 pieces with drill chuck Vertical Drilling and Milling Head - T-Slot Width 12 mm Cutter head Coolant Setup x - travel 500 mm y - travel 200 mm z - travel 400 mm Feed: 5.6 - 238 mm/min with quill stroke Speed: 35.5 - 1800 rpm with rapid traverse Clamping area: 800 x 300 mm Total power requirement 16 A Spindle holder ISA 40 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.
x-travel:3.000 mm y-travel:700 mm z-travel:1.200 mm Spindle RPM:2.500 1/min tool taper:SK50
Boring power:10 mm weight:590 kg connected load:2 kW dimensions::1500 x 1300 x 2300 mm
Year: 2011 - technically efficient, ready to work - after full service - 3-spindle - 2 copying templates - pneumatic profile clamps - infeed and outfeed feeders - cooling and lubrication installation
Key data: 800 mm, 670 mm, 500 mm
High-speed milling machine for graphite machining Year of manufacture 2004 with a lot of accessories such as collets, graphite vacuum cleaners, etc.
x-travel:100 mm y-travel:100 mm z-travel:100 mm total power requirement:0,6 kW weight of the machine ca.:130 kg dimensions of the machine ca.:1600 x 1000 x 1300 mm milling depth:0-50 mm
x-travel:630 mm y-travel:200 mm z-travel:360 mm total power requirement:7,5 kW weight of the machine ca.:2,5 t dimensions of the machine ca.:1500 x 1800 x 1900 mm spindle taper:SK40 table-size:250 x 1100 mm
Stock number: 3896 PROCESSING Manufacturer: HERMLE , Type: C800 V Machines NO.: 14337, Year of manufacture: 2001 Specifications: Table size 1000 x 560 mm Large table load 1500 kg Longitudinal movement (X) 800 mm Transverse movement (Y) 600 mm Vertical movement (Z) 500 mm Spindle cone SK 40 Stepless spindle speeds 0-16000 rpm Spindle motor 25/16.8 Kw Total power 31 KVA Control Heidenhain 430 - 3 Axis Fabr. Operating hours spindle 9666 hours Accessories: Tool holders 2 pcs Operating instructions Length: 2700 mm, Height: 2930 mm, Width: 2210 mm, Weight: 7000 kg
Key data: 500 mm, 400 mm, 300 mm
Year of manufacture 1985 with CNC control 432 The machine is in good condition, the second machine is available as spare part machine Two identical machines available !
Inv. Num. : 7631 Type: F80 Produzent: Pfeifer Erzeugt: 1976 Parametern: Maximale Drehzahl der Spindel: 1000 1/min Verfahrwege X-Achse: 1700 mm Verfahrwege Y-Achse: 1800 mm Verfahrwege Z-Achse: 1800 mm Verfahrwege W-Achse: 710 mm Spindeldurchmesser: 80 mm
x-travel:1120 mm y-travel:370 mm z-travel:410 mm total power requirement:14,5 kW weight of the machine ca.:3850 kg dimensions of the machine ca.:3,5 x 3,5 x 2,2 m Table dimensions:400 x 1600 mm spindle taper ISO:50
x-travel:1120 mm y-travel:345 mm z-travel:400 mm total power requirement:14,5 kW weight of the machine ca.:3,85 t dimensions of the machine ca.:3.500 x 2.920 x 2.710 mm table-size:1600 x 400 mm spindle taper:SK 50
Universal milling head SK 40, presumably from Huron universal milling machine
used
1 Continuous 5 Stand Hot Rolling Mill Mfc.: Fata Hunter Built: 2000 2 Rewinders Strip width: 480 mm Thickness: in 26 mm out 2.0 mm Qty. 1 Hot Gas Filter Mfc.: Nederman Built: 2015 Type: Flat bag filter Capacity Flow: 45000 Nm³/h Temp.: 125 °C Filter area: 650 m²
revolutions per minute: 8000 U/min x-travel: 1000 mm y-travel: 500 mm z-travel: 570 mm Control: Siemens weight of the machine ca.: 5000 KG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Serial number: 36434 Operating voltage: 380 - 415 V Connection: 1.5 kW Speed: up to 1400 rpm Rated current: 5.7 A Speed: from 70 to 2590 rpm Drilling depth: up to 170 mm Table dimensions: 650 x 270 mm with three grooves incl. three-axis digital display from the manufacturer HEIDENHAIN also an attached vice, jaw width: 85 mm and a matching dividing head
Offer 24103 Specifications: - Working range of the axes - X / Y / Z 450 / 400 / 420 mm - Table size 850 x 250 mm - Max. distance from spindle to table 400 mm - Working spindle speeds horizontal 30 - 1275 rpm - Working spindle speeds vertical 66 - 2840 rpm - Feeds X – Y and Z axis - Rapid traverse - Drive 400 V / 3.2 kW - Space requirement approx. W 1400 x H 1800 x D 1400 mm - Weight approx. 1400 kg
excl. tools and fencing; including light curtain security
DETA Simplex milling machine ; Original condition with power supply and rapidity on all 3 axes; suitable for precise metalworking; Voltage: 380 volts ; Speed: 30–1190 rpm ; Table size: 1300 x 300 mm ; Recording: ISO 30 ; Cooling pump: yes ;
Edge milling machine on trolleys see pictures Condition: unchecked (6)
Stock number: 3904 PROCESSING Manufacturer: BRIDGEPORT, Type: VMC 1000 30 Machine NO.: 822918, Year of manufacture: 2002 Specifications: Table size 1150 x 580 mm Large table load 800 kg Longitudinal movement (X) 1020 mm Transverse movement (Y) 510 mm Vertical movement (Z) 500 mm Spindle cone ISO 40 Spindle speeds 6000 rpm Total power 25 KVA Tool changer 30 places Control Heidenhain Fabr. Accessories: Chip conveyance. Length: 2200 mm, Height: 2800 mm, Width: 3200 mm, Weight: 4400 kg
maximum number of results exceeded
please refine your search
250 € 
