wind mill used for sale

The machine is ideal for short lengths (30, 50 or 100m) either in full width, or you can also divide into different widths, from a maximum of 1600 mm. Thanks to the 4 take-up shafts, the machinist is able to unload and position a new sleeve while the machine is still winding. This brings an enormous amount of extra power at the end of the day, as there are only short downtimes. The machine is still in daily use and sample materials can be tested daily. We would then disassemble the machine, pack it and put it on a stable pallet. 20ft containers can be loaded via the ramp.

Vertical clamp for windows ITALPRESSE

Universum Cone Winding Machine Winding Machine - Manufacturer : J. Kasper GmbH - Type: HWM 50/70 EZ - Winding machine for wrapping croissants, croissants, etc. - 400 volts 50 Hz - YOC: 2015

Year: 2003 technically efficient, ready to work – after full service flash limit: 0.2 – 2 mm maximum welding dimension: 2400 mm support path programmable PLC controller automatic welding process

- technically efficient, ready to work – after full service - drilling for the bottom hinge - automatic screwdriver + ASS 60 screw feeder - punch holder - centring system - steering stop for trimming the stay - tilting table - shelf

A Sahm precision cross winder 260E is offered. Traverse width stroke: 300mm, winding speed max.: 500m/min, bobbin diameter: up to 320mm, bobbin volume max.: approx. 22.4dm³, titer range: tapes: approx. 150dtex - 3500dtex, monofilaments diameter: 0.15mm - 0.60mm. Inspection by appointment possible.

2 SAHM precision cross winders type 260 are offered. Year of manufacture 1985 and 1998. Each machine has 2x 96 positions 192 positions total, plus 10 additional reserve heads, total 202 positions. Traverse stroke: 13inch approx. 330mm. Mandrel diameter for sleeves: 3 1/4inch approx. 82.5mm. Inspection by appointment possible. The machines are not located in Europe.

Year: 2006 - technically efficient, ready to work – after full service - handle function - copying template - pneumatic profile mounting - centering device

Year: 2011 - technically efficient, ready to work – after full service - WT 535B automatic rotary station - disc cutter: 250 mm - windows PC control - profile recognition system - for turning tools on and off as needed - extensive tool equipment

Hello, We hereby offer you a used, self-propelled stretch wrapping machine (pallet wrapper), manufacturer PKG, type Motion. Manufacturer PKG SRL Model Motion Year of manufacture 2018 Max. circumference speed: 93m/min. Battery equipment: Standard AGM/Gel batteries 12V – 110Ah, both batteries were replaced at the end of last year. Charging cycle 8-10 hours Pallet dimensions: min. 500 x 500mm, max. unlimited Max. winding height: 2,200mm Min. winding height: 500mm Turning radius: 1,100mm Electr. Battery charger connection: 230V, 50Hz Charger: High frequency charger in the machine Machine weight: approx. 400kg Slide: Film Type: Machine Stretch Film Roll diameter: max. 250mm Roll height: 500mm Roll weight: ~20kg Note: The aforementioned technical data have been taken from the operating instructions, brochures of the manufacturer or other sources, for which we c ...

Code: 0321 Brand: SCM Model: MULTIFLEX C - CE Standard Automatic working center for window frames for tenoning, profiling and contouring - Max workpiece thickness mm 140 - CE Standard Technical data Automatic carriage with chipbreaker Max working length 2800 mm Min/max workpiece thickness 30/140 mm End cutting saw diameter 400 mm - Motor Hp 4 Tenoning spindle useful length mm 320 - Motor Hp 10 Spindle diameter mm 50 Max tool diameter mm 350 Profiling spindles: 1° Anti-splinter profiling spindle length 320 mm - Motor Hp 7,5 - Tool diameter mm 220 2° profiling spindle length mm 320 - Motor Hp 7,5 - Tool diameter mm 220 Min and max diameter of profiling spindles tools mm 100/220 Profiling spindles diameter 50 mm Tool group Zuani Variable speed feed Glazing bead recovery group - Motor Hp 3 - Diameter of suction mouth mm 50 Overall dimensions mm 2400 x 3300 x 200 ...

A take-up winding machine Sahm for parallel winding is available, traverse width range: 10mm-300mm, max. spool diameter: 400mm, wound material: monofil, max. tape width: 30mm, max. yarn speed: 600m/min, max. winding width: 310mm, max. spool weight: 20kg, tension force range: 10cN-1250cN, winding heads: 90, documentation available, on-site inspection is possible.

Year: 2006 - technically efficient, ready to work – after full service - flash limitation: 0.2-2 mm - maximum welding length: 2600 mm - support arms - PLC controller

Squirrel wrapping machine Erka WMA 30 Winding belt width 320 mm for all stalks such as Kornspitz and pretzel sticks, Connection 400V, 16A-CEE plug Used machine overhauled with warranty

Squirrel wrapping machine Erka WMA 30 Winding belt width 320 mm for all stalks such as Kornspitz and pretzel sticks, Squirrel wrapping machine mobile Connection 400V, 16A-CEE plug Used machine

Cone wrapping machine Universum LWT 3/80-HWM50I for all spears such as Kornspitz and pretzel sticks, etc. Universal - Combi - Winding Machine for all doughs for wrapping and long rolls Longitudinal knit width 800 mm for roll lines with transverse discharge Connection 400V, 16A-CEE plug Used machine from the bakery

Croissant slicer & wrapping machine Fritsch CTR 700/30 Product description Manufacturer: Fritsch Type: CTR 700/30 Year of construction: 2000 Condition: used, cleaned, functional Used Fritsch CTR system Incl. various rollers Connected load: 3x 400 V / N / PE / 0.5 kW The machine we have connected electricity and air. Unfortunately, there is not enough bar. Therefore, a technician needs to look for details see pictures.

A total of five identical Vestas wind turbines are expected to be available from early 2027. Rated power: 850kW, rotor area: 2124m², rotor blades: 3, rated speed: 26rpm, generator voltage: 690V, gearbox stages: 3, cut-in wind speed: 4m/s, rated wind speed: 16m/s, cut-out wind speed: 25m/s, tower material: steel, hub height: 74m, nacelle weight: 22t, rotor weight: 10t. Documentation available. An on-site inspection is possible. Individual sale possible.

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving coil instruments, moving coil measuring mechanism, temperature measuring device, control panel, temperature measuring device, combined measuring device with data logger, anemometer, wind transmitter, wind speed sensor -Manufacturer: Thies, Windgeber 4.3350.10.000 -Measuring range: 0.3 to 75 m/s -Price: per piece -Number: 3 pieces -Dimensions: 200/210/H290 mm -Weight: 0.4 kg/piece

Electronically controlled unwinding unit, thread unwinder, yarn winder, thread winder, reel, -Manufacturer: Texmer, Electronically controlled unwinding unit -Type: EGA 2000 EGA-2000-31001271 -Spool weight: max. 40 kg -Quantity: 12x spooling units available, 1x shaft without attachment Price: per piece -Dimensions: 545/255/200 mm -Weight: 13.8 kg/pc.

Window processing line, CNC window manufacturing plant, window angle machine -Manufacturer: Gubisch, Saw unit right left from window manufacturing plant type DST H -Motor: Fimec type H80SB25EF 4 kW / 2800 rpm -Shaft: Ø 30 x 70 mm -Saw blade: Ø 345 mm -Price/Fee: complete -Dimensions each: 470/410/H425 mm -Transport dimensions: 970/500/H425 mm -Weight: 87 kg

Window processing line, CNC window manufacturing plant, window angle system, clamping device -Manufacturer: Gubisch, clamping device from window manufacturing plant type DST H -Stroke: 180 mm -Geared motor: SSB type SSB DS-SgFFH008 0.25 kW / 405/57 rpm -Encoder: ferrocontrol SAE-1020 H -Number: 2x clamping device available -Price: per piece -Dimensions: 850/450/H240 mm -Weight: 42 kg/pc.

Window processing line, CNC window manufacturing plant, window angle machine, clamping device, pneumatic clamp -Manufacturer: Gubisch, clamping device from window manufacturing plant type DST H -Stroke: 120 mm -Clamping cylinder: airtec HM-25-120 -Number: 2x clamping device available -Price: per piece -Dimensions: 560/225/H80 mm -Weight: 5 kg/pc.

Manufacturer: Weinig Unicontrol 6, Type: Typ 6, Year: 1985, Control: SPS, Work piece width min-max mm: 25 - 260 mm, Min.-max. workpiece length in mm: 220 + 2xZapfen.<CRLF>max. 6000 mm, Min.-max. workpiece height in mm: 30 - 100 mm, Controlled lenght stopper: no, Studioeinrichtung Winkel: yes, Crosscut saw controlled: yes, Diameter of the spindle mm: 50 mm, Moulding spindles: 3, Länge Profilspindel mm: 300 mm, 1 spindle lift in mm: 100 mm, 1Engine power kW: 11 kW, 2 spindle lift in mm: 100 mm, 2 Engine power kW: 11 kW, 3 spindle lift in mm: 100 mm, 3 Engine power kW: 11 kW, Diameter of the spindle mm: 50 mm, Feeding speed max m/min: 5,8 - 80 m/min., Feed stepless: yes, Outer profiling package: yes, Splintering controlled: no, Horizontal spindle clocked: yes, Online connection: no, Work piece re-charging: no, Exhaust diameter mm: 180 mm, Required space L x W x H mm: 6000x3000x2300 m ...

Manufacturer: Weinig Unicontrol, Type: Unicontrol 10, Year: 1999, Control: Weinig/Siemens, Controlled lenght stopper: yes, Trimming saw: yes, Studioeinrichtung Winkel: no, Automatisierungspaket: yes, Doppelteilpaket: yes, Elektrischer Längenanschlag bis mm: 3600, Crosscut saw controlled: yes, Diameter of the spindle mm: 50, Werkzeugdurchmesser max.: mm: 400/320, Length of tenoning spindle mm: 640, Tool travel range tenoning spindle: für 8 Werkzeuge, Schlitzspindel Motorleistung kW: 7,5, Moulding spindles: 3, Länge Profilspindel mm: 320 X 50, 1 length of profile spindle in mm: 320, 1Engine power kW: 5,5, 2 length of profile spindle in mm: 320 X 50, 2 spindle lift in mm: 320, 2 Engine power kW: 5,5, 3 Länge Profilspindel mm: Profilfräsaggregat vertikal, 3 Engine power kW: 2,2, Diameter of the spindle mm: 50, Fly circle moulding tool mm: 320, Fly circle tenoning tool: 400, Constant str ...

Manufacturer: Weinig, Type: Unicotrol 10-5, Year: 1992, Control: Siemens/weinig, Min.-max. workpiece height in mm: max.100 mm, Controlled lenght stopper: yes, Trimming saw: yes, 4-fach Konterholz: yes, Studioeinrichtung Winkel: yes, Automatisierungspaket: yes, Doppelteilpaket: yes, Unitecspindel: yes, Beschlagfräseinheit: yes, Nutspindel: yes, Crosscut saw controlled: yes, Diameter of the spindle mm: 50, Werkzeugdurchmesser max.: mm: 400, Tool travel range tenoning spindle: 6 X 85/7 Werkzeuge, Länge Profilspindel mm: 3, 1 spindle lift in mm: 2 X 95/3 Werkzeuge, 1Engine power kW: 2 x 95, 2 length of profile spindle in mm: 11, 2 spindle lift in mm: 3 X 75/4 Werkzeuge, 2 Engine power kW: 3 X 75, 3 Länge Profilspindel mm: 11, Diameter of the spindle mm: 3 kw, Diameter of the spindle mm: 50, Feed stepless: 6-12, Total power kW: yes, Required space L x W x H mm: 10, Year :1992

Winding roller, winding shaft, tensioning shaft, pneumatic expansion shaft, reel, reel rod, trapezoidal thread spindle, spindle, unwinding reel, unwinding reel, sheet metal unwinder -Manufacturer: Tidland, winding shaft -Type: G890E -Drive shaft: Ø 40 x 80 mm -Mounting: Bolt circle Ø 220 x 11 mm -Number: 8x winding shaft available -Price: per piece -Dimensions: Ø 250 x 855 mm -Weight: 53 kg/unit

Window system WEINIG, Unicontrol 6, S/N 035-823, built in 1997 TECHNICAL DATA:  Pneum cross-cut saw. clocked (3 KW) with laser directional light  Slotted spindle 50 x 320 mm for 4 tools of 80 mm each - motor 11 KW  Synchronous spindle 50 x 120 mm - motor 7.5 KW  Longitudinal profiling spindle 50 x 320 mm for 4 tools of 80 mm each - motor 11 KW  Fitting spindle pneum. clocked 40 x 160 mm - motor 3 KW  Saw/groove spindle horizontal top, pneum. clocked - motor 3 KW  Feed adjustable from 6-12 m/min. - Motor 1.1 KW  Screen control for 99 window types  Support strip for rung production pneum. Timed  Studio window setup with digital angle display  Length stop up to approx. 3,500 mm  Milling device with support rail  Return transport device to the machine operator  Machine complete with operating instructions, circuit diagrams, spa ...

Double Head Welding Machine Urban Plastic Window Welding Machine Type: AKS 4110 Year of Make: 2/91 Working length max. 3090 mm Connected load 6.5 kW Operating pressure 8 bar Air requirement per weld 15 l Electronic temperature control Welding level 0 – 300°C Electronic temperature control Welding limitation 35 – 65°C - Heated blade welding bead limitation 2 mm - Welding of 2 corner joints at an angle of 90° in one operation. - Fast and accurate insertion of the profile thanks to the automatic welding head feed. - Automatic weld adaptation to different profile cross-sections - Safety clamping systems that automatically adjust to different profile heights. - Guide elements made of hardened, ground shafts with recirculating ball bushings. Machine dimensions: L 4015 mm x W 1100 mm x H 1840 mm Weight: 790 kg

Welding Machine Urban Plastic Window Welding Machine Type: AKS 3610 Year of manufacture: 2/92 Connected load 2.7 kW Mains voltage 220 V, 50/50 Hz Operating pressure 8 bar Air requirement per weld/stroke 15 l at 6 bar Adjustment range angle 30° - 180° Profile height min. 30 – max. 105 mm Profile width at 90° max. 157 mm Compressed air connection NW 8, 7 bar - Heated blade bead limitation 0.2 mm - Angle welding from 30° - 180° with excellent accuracy. - Above-average welding results of the AKS 3610 for acrylic and foil-coated profiles. - Optimization of the welding result through parallel welding processes. - Individual setting of all welding parameters - Quick change of the outer contour allowances with holding magnets. Machine dimensions: L 770 mm x W 880 mm x H 1500 mm Weight: 320 kg

Wing Attachment Table Dimensions approx. L 2700 mm x W 1300 mm with glazing bead saws right and left Handle drilling unit with 3 drills Automatic screwdriver Lock box milling machine Drill bits for corner trestles Good, ready-to-use condition.

Range : ø 20-75 mm (SDR 11 & 13.6) Core diameter : 760-1600 mm Width : 140-500 mm Outer diameter max. : 2700 mm Remark : Incl. cutter, binding unit, ejector

Year: 2005 - technically efficient, ready to work – after full service - two pneumatically tiltable beams (resistance and pressure) - adjustable height: 500 mm (liftable) - working length: 2700 mm

Croissant wrapping machine Seewer Rondo SCR40. A0 - Croissat wrapping machine mobile - Manufacturer: Seewer Rondo - Model: SCR40, A0 - 400 volts

Cone wrapping machine HWM 500 4C for all spears such as Kornspitz, pretzels and pretzel sticks, etc. Universal - Winding machine with infeed belt 1 man waitress for all doughs for wrapping Cone wrapping machine with 500 mm belt width only DGUV V3 tested by us Connection 400V, 16A-CEE plug NEW Machine & SAB Tested with warranty + spare parts service

Cone wrapping machine Universum HWM 50/70 EZ for all spears such as Kornspitz, pretzels and pretzel sticks, etc. Universal - Combi - Winding Machine for all doughs for wrapping and long rolls only DGUV V3 tested by us Connection 400V, 16A-CEE plug Used machine overhauled & SAB tested with warranty + spare parts service

Turntable diameter: 1650mm, turntable height: 65mm, mast height: 2560mm, max. load capacity: 2000kg, max. pallet dimensions X/Y/Z: approx. 1200mm/1100mm/2400mm. Machine dimensions X/Y/Z: approx. 2600mm/1650mm/2600mm, weight: approx. 550kg. Documentation available. An on-site inspection is possible.

Format range: Cutting width max. 1120 mm, min. 80 mm Cutting length max. 1020 mm, min. 100 mm Film width max. 840 mm, min. 30 mm Film length max. 720 mm, min. 50 mm Equipment: 1 lane (preparation for 2 lanes) Suction belt feeder with vacuum, vibrator, cliché glue unit Other: Machine can be viewed by appointment while running.

1- Grinding flap roller 3 KW 2- Cross brush 1.1 KW 3-cross brush 1.1 KW 4- 3x sanding pads from above 1.5 KW diameter per plate 40mm 5- Disc brush for edge processing with material detection This grinding machine will be offered for private sale outside the auction. Dear interested parties, if you are interested in the facility, please contact our employee Mr. Florian Heinz at the following contact details: E-mail: F.heinz@tbauctions.com Mobile: +49 152 08685732 The dismantling and loading of the system can also be taken over for a fee. Auction-ID: A7-46260-1

Year: 2009 - technically efficient, ready to work – after full service - pneumatic clamps - cutting at 45° - two cutting discs: 225 mm + two scoring blades - measuring slider

A used Universum cone winder and pretzel roller is currently for sale and immediately available in our warehouse in Bielefeld. Universum Cone Wrapper / Pretzel Long Roller Type: LWT 3/80 Prem-50J-EB2W/40 More information and pictures on request.

Manufacturer: Ratti Year of Manufacture: 2008 Model: R 325N DT Number of spindles: 90 Number of sections: 10 Spindle type: Tangential belt drive Max. mechanical spindle speed: 9,000 min-1 Max. technological spindle speed: 7,000 min-1 Spindle pitch: 366 mm Whorl diameter: 52/64 mm Twisting range: 40 to 1,869 / 32 to 1,519 tpm Yarn count range: 167 to 560 dtex Feed Package - Type: Bobbin - Max. length: 290 mm - Max. diameter: 250 mm - Volume (smooth yarn): 4,500 g Winding - Number of winding decks: 1 - Traverse gear: UDR - Max. bobbin diameter: 250 mm - Traverse stroke: 250 mm - Tube diameter x length: 69 x 290 mm - Max. mechanical winding speed: 200 m/min - Max. technological winding speed: 170 m/min Machine Frame Dimensions - Number of sections: 10 - Length per section: 1,830 mm - Total machine length: 19,000 mm - Machine width: 860 mm - Max. height: 1,756 mm - Height to ...

Manufacturer: Ratti Year of Manufacture: 2008 Model: R 325 NF Spindles per section: 14 Number of sections: 1 to 12 Total number of spindles: 126 Spindle type: DT 140 Spindle drive: Tangential belt Max. mechanical spindle speed: 14,000 min-1 Min. mechanical spindle speed: 6,000 min-1 Max. technological spindle speed: 12,000 min-1 Whorl diameter: 35 mm Twisting range: 59 to 2,777 tpm Yarn count range: 33 to 330 dtex Feed Package - Type: Cops (ring-spun bobbin) - Feed package length: 420 mm Winding - Number of winding decks: 1 - Traverse gear: UDR - Max. bobbin diameter: 250 mm - Traverse stroke: 200 mm - Tube diameter x length: 56 x 230 mm - Max. mechanical winding speed: 150 m/min - Max. technological winding speed: 140 m/min Machine Frame Dimensions - Length per section: 1,830 mm - Total machine length: 2,554 + (1,830 x n) mm - Machine width: 860 mm - Max. height: 2,14 ...

TECHNICAL DATA: 02 Motors: TX3 – 3 axles, equipped with HSK63E mount – chain magazine with 46 places TX5 – 5 axes (C ±270°, W ±120°), equipped with HSK63F mount – magazine with 24 slots Machinable workpiece length: max. 7000 mm Wood cross-section: max. 300 mm Machinable workpiece thickness: from 20 to 95 mm Loading buffer with 2 stations – simultaneous processing of 2 workpieces Videojet Laser Marking Liquid cooling for the spindles

Single Head Corner Welding Machine

Rotox Water Slot Mill

Type: Lot of pneumatic tools and ultrasonic polishing unit Manufacturer: SÜDA Fischer & Windbiehl Model: PROFI-MASTER 32/42 Included: Ultrasonic polishing control unit, handpiece, pneumatic grinders, pneumatic sander, angle pneumatic tool, hoses and accessories Control unit speed range: 4,000 - 42,000 rpm Tool types: Straight grinders, micro grinder, orbital sander, ultrasonic polishing handpiece Power supply: 230 V Condition: Used, signs of wear and workshop use visible Remarks: Sold as shown Auction-ID: A7-45993-149

We offer about 40 windshield wiper sets in mint condition for different car brands. estimated value of goods 800 €Shipping within Germany possible - direct processing with the seller. Only bid if you have sufficient financial resources, a bid is binding. Auction-ID: A7-46944-235

Wrapping machine Fritsch CRH 120/400 Year of Make: 2015 Approx. 450 operating hours Condition: technically as good as new, visually few signs of wear 1-row operation 400 mm table width Output depending on the size of the piece, the number of windings and the feeding capacity: max. 5000 pieces/h Suitable for line combination

From Garant, Holex, Gühring, condition unchecked Auction-ID: A7-47109-81