127,273 used machines on RESALE, but how to find them? Machine Search
Key data: 1200 KW, 1850 kVA, 400 V
MWM TCG 2020 V12 Containerized Biogas year 2012 hours 21.000 total running hours 50hz, 1500rpm, first container -engine is changed in 2018 second container engine year 2012 size container : 300cm wide x 320 high x 1200 long 26.000kg
Key data: 7370 KW, 9213 kVA, 11 V
Five (5) Surplus/Never use/Never Installed, Caterpillar 16CM32C, 7370 kW, 11,000v. 60 Hz. These units can burn Diesel, Gas Oil, Marine Gas Oils (MGO), Marine Diesel Oil (MDO). Year of Manufacturing of this power plant is 2009. The sale of these units include: Barring Gear, Air Intake System, Fresh Cooling Water System, Exhaust System, Diesel Oil System, Lubrication System, Air Starting System, Control Systems and more The generator is a GE Synchronous Generator, 9213 kVA, 7370 kW, 10 Poles, 720 RPM, 11,000v. 60 Hz. 0.8 P.F. IP54 IC81W. This unit comes with IMO Tier II certification and ABS certifications for the Heat Exchangers, Flexible Couplings, Diesel Engine and Generator. The shelf life of these units is over the five-year limit given by Caterpillar. Therefore, these units no longer have the Caterpillar Warranty. Unit is now ready for shipment.
Equipped with rotating man, papers, Auction-ID: A1-40136-73
used
Key data: 4400 KW
We Offer 2x Genset TCG2032V16 .50 HZ 15000Volt Gensets,Syncron. Hours about 43500, Year of Bulding 2011 1x Genset TCG2032V16, 50HZ 6000Volt Genset, Hours about 43500, Year of Building 2011 all Service up to E40 is done from MWM ,Turbochargers E60 is done Engine in warm condition stay in a factory in europa,can visit, but no start,(have not more Gas) exposet,picture on request.
Outputs: 1x 400V & 1x 230V Auction-ID: A1-46037-2878
used
Key data: 4400 KW, 6300 V
we can offer 1x Genset Jenbacher 624, 4400 KW 50HZ 6300Volt,Running hours about 59.000 hours all Service is done from Jenbacher up to 59,000 hours. General overholing 60.000 hour is not done. Building 2012 Engine can visit in Europe
Manufacturer: Atlas Copco Model: QAS200 Year of Manufacture: 2011 Type of Machine : Emergency Power Generator Operating hours : 242 h Find more here - / Contact us at -
R1334 Power Generator Emergency Power Generator POLYMA/DEUTZ 80 KVA ---------------------------------------------------------------------- -------------------- installed in a truck trailer single-axle, was used on construction sites. Dirty outside by leaves and dirt Polyma Kassel 80KVA = 16A = 64 KW,Diesel engine Deutz type F6L912 7ßKW 95hp 2000 rpm., With diesel hand pump hose in canister and pump,With cable/plug 63 A, The trailer is not soundproofed, stood outdoors for years under canopy and is accordingly polluted More detailed pictures on request
; Power [PS]: 41; Gross weight [kg]: 2800; Engine: Yunnei / DEF20CFA4; Accessories: Tanker, Battery, Control Panel, Input: 3P Socket - Busbar, Output: 1P Main load socket - Busbar - AC socket: 1P, 2x16A, 1x32A; 3P, 1x63A 1P Socket; Water Tank Volume [l]: 100
Key data: 5980 , 6900
Available complete natural gas power plant of a Wartsila 18V34SG. The engine stopped running a full load with all the maintenances done. The aeros for the cooling system are not included, only the exchangers. Brand: Wartsila Model:18V34SG Brand Generator: ABB Power: 5980kW Fuel oil: Natural Gas Yom:12/1999 RPM: 750 Hours:133000 hours We can have 1 more units.
; Power [PS]: 27; Gross weight [kg]: 1350; Engine: Yunnei / DEF20CFA4; Accessories: Tanker, Battery, Control Panel, Input: 1P Socket - Busbar , Output: 1P Main load socket - AC socket: 1P, 2x32A, 2x16A - Busbar - 1P Socket; Water Tank Volume [l]: 100
; Power [PS]: 61; Gross weight [kg]: 2800; Engine: Yunnei / DEF30CAA5; Accessories: Tanker, Battery, Control Panel, Input: 3P Socket - Busbar, Output: 1P Main load socket - Busbar - AC socket: 1P, 1x16A, 1x32A; 3P, 1x63A - 1P Socket; Water Tank Volume [l]: 150
Boiler 7 L; Auction-ID: A7-45992-73
Technical description : - RAPID ACTION DOOR - Height = 2000mm - Width = 1800mm
Technical description : - RAPID ACTION DOOR - Height = 2000mm - Width = 2000mm
Controls:FANUC 30iA WORKING RANGE -ROBOT-:. - capacity:170 kg - Reach:1520 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:800 kg
Key data: 1186 KW, 400 V
Jenbacher 416 Biogas CHP Generating Set Engine overhauled in Aug 2022 at 62.850 hrs. Model - Jenbacher 416 Hrs - 86,600 Year - 2014 Fuel - Biogas Capacity - 1186 kW HZ: 50 V: 400 Scope of supply: Engine, Alternator, Base Frame, Control Panel (Dia.Ne XT3) Gasline, Exhaust Gas Heat Exchanger, Water Plate heat Exchanger, Exhaust cooler, Ventilators, Piping and Cabling. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com
Controls:FANUC 30iA WORKING RANGE -ROBOT-:. - capacity:170 kg - Reach:1520 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:800 kg
used
Key data: 4401 V, 6300
Jenbacher J624GS, 4401 kw,6,3KV, 50Hz Used Genst from 2011 with about 59000 hours, all service is done from Jenbacher. redy for shipment , stay warm in the Factory ,but can not start(no gas), loading free on truck. from south Europe 60.000 hours are not done. all service from Jenbacher up to 59000 houers whos done.
WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2700 mm
Controls:KUKA KRC 2 WORKING RANGE -ROBOT-:. - capacity:150 kg - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1285 kg
Controls:KUKA KRC 4 WORKING RANGE -ROBOT-:. - capacity:90 kg - Reach:2696 mm - Number of controlled axes:6 ELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - total weight approx.:1058 kg
Controls:KUKA KRC 4 WORKING RANGE -ROBOT-:. - capacity:90 kg - Reach:2696 mm - Number of controlled axes:6 ELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - total weight approx.:1058 kg
Controls:KUKA KRC 4 WORKING RANGE -ROBOT-:. - capacity:120 kg - Reach:2896 mm - Number of controlled axes:6 ELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - total weight approx.:1084 kg
Key data: 800 V, 400
Complete CHP MWM 2016V16 C genset in sound-proof casing. Fuel - Natural Gas Capacity: 800 kW HZ: 50 V: 400 Scope of Supply: Engine, Alternator (Marelli), Control Panel, Gasline, Heat Exchanger, Flue gas cleaner, Soundproof casing, Frame. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.
Controls:KUKA KRC 4 WORKING RANGE -ROBOT-:. - capacity:120 kg - Reach:2896 mm - Number of controlled axes:6 ELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - total weight approx.:1084 kg
Rated capacity:360 kVA Rated capacity:360 kW fuel:Diesel tank capacity:800 l Number of working hours:294 h
; Power [PS]: 170; Gross weight [kg]: 2750; Engine: Battery System: LIFePO4
; Power [PS]: 68; Gross weight [kg]: 1600; Engine: Battery System: LIFePO4
; Gross weight [kg]: 236
; Gross weight [kg]: 270
; Gross weight [kg]: 344
volume bucket for Genie / Terex attachment, 200 cm width, 1.60 m³ capacity, many other attachments on stock
NEW, width 200 cm, 250 kg net weight, 0.70 m³ capacity, with Genie/Terex mount
Key data: 1600 KW, 2000 kVA, 11000 V
Diesel Generators Cummins 2 x 2000kVA, Skid Mounted, Never Installed This power generation package consists of two (2) never installed Cummins diesel generator sets model C2250D5, each rated 2000 kVA / 1600 kW Prime Power operating at 1500 RPM, 50 Hz, 11 kV. The generator sets are designed for reliable continuous operation in accordance with ISO 8528 standards and are suitable for industrial, utility, and critical infrastructure applications. Each generating unit includes a Cummins QSK60G4 engine, high-voltage alternator, advanced Power Command control system, on generating set mounted cooling radiator, and associated accessories to ensure dependable power production and protection. Technical Parameters Manufacturer Cummins (UK) Generator model C2250D5 Manufacturing year 2022 Engine model Cummins QSK60G4 Engine speed 1500 rpm Alternator type PMG P80HVR Quantity 2 Un ...
used
NEW UNUSED G3412 year 1995 -470HP- NATURAL GAS only engine
Key data: 8000 KW
Diesel Generators Wartsila 2 x 12V32 HFO – 2 x 4.0 MW/ 50Hz Deliver proven, industrial-grade power with these Wartsila 12V32 medium-speed diesel generator sets, currently available in standby condition. Equipment is maintained by the book and thus in good operational condition. Last thorough 48k Service was carried out in 2016 by Wartsila Service for both engines and since then, the plant has been operated about 20’000 hours. Designed for continuous and prime power duty, these units offer a good reliability, fuel flexibility, and choiceed auxiliaries — making them ideal for industrial plants, captive power projects, utilities, as a base load or back-up electric power generation. These units are priced for sale. Contact us today to receive commercial valuation, scope clarification, and inspection arrangements for this 8 MW Wartsila power solution Technical Characteristics ...
Key data: 19560 KW, 11000 V
Multifuel 19.5 MW Wartsila CHP Power Plant with 2 x 20V34DF (2021) This 19.5 MW multifuel (Gas / HFO / LFO) combined heat and power (CHP) plant is equipped with two Wartsila 20V34DF generating sets and exhaust gas heat recovery boilers. The plant was commissioned at the end of 2022 and has accumulated approximately 20,000 operating hours since new. All operation and maintenance activities have been performed by the Wartsila OEM Service team, ensuring that both the generating sets and auxiliary systems are maintained according to standards and remain in near-new condition. The plant is currently fully operational, available for immediate delivery, and can be load-tested for qualified buyers. The scope of delivery includes complete mechanical equipment capable of producing 19.5 MW of electrical power and 9.5 tons/hour of saturated steam at 10 bar. In addition, the delivery includes an ...
maximum number of results exceeded
please refine your search
100 € 
