winch used for sale

pressure: 100 t stroke: 310 mm table surface area: 285 x 1010 mm dayligth: 1055 mm column travel between the guideways: 1010 mm stroke speed: 180 mm/min total power requirement: 3.0 kW weight of the machine ca.: 1050 kg dimensions of the machine ca.: 1930 x 900 x 2260 mm Furnishing: - motor-driven hydraulic workshop press - 2 speeds Infeed speed 595 mm / min. Working speed 260 mm / min. - High pressure unit with manometer - Regulating and 3-way valve: feed-idle-return - The receiving table can be adjusted by a winch - Piston made of tempered and chrome-plated special steel - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50.0 t stroke: 260 mm dayligth: 1135 mm stroke speed: 215 mm/min column travel between the guideways: 775 mm total power requirement: 1.5 kW weight of the machine ca.: 530 kg range L-W-H: 1650 x 850 x 2085 mm MADE IN ITALY Furnishing: - powerful workshop presses for craft and repair businesses - 2x delivery speeds - Hydraulic high pressure unit - Regulating and 3-way valve: Feed - idle - reverse - Height-adjustable recording table using a cable winch - Piston made of tempered and chrome-plated special steel - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

•Type: Double-beam; •Capacity: 4 tons; •Gauge: 18.5 m; •year of construction 2013; •manufacturer: Tekno Impianti srl; •serial number: 4100.1; •equipped with a winch serial number: CAS 1001. Notes The overhead crane is dismantled and stored outdoors. Stopped since 2020.

Description: • All terrain vehicle • Spanish registration number 0040 HSP • Frame number e112001/116030012 • Turbo-diesel engine FORD 224DT , 4 cylinders, displacement 2179 cc, power 110 KW • Manual transmission, gearbox 6 gears • 4 wheel drive • Maximum speed 181 km/h, acceleration 0-100 km/h: 11.20 sec • Average consumption 7.00 l/100 km • BULLFACE electric winch • Mileage 197409 km according to the counter • This vehicle is delivered with 2 set of keys • Ownership change costs will be paid by the buyer • Spanish MOT certificate valid till 22/08/2023 • IMPORTANT: • Surplex will deliver this vehicle to the buyer with a Sale Notification in DGT (Spanish traffic authorities). Approx. Onsite Dimension. (l x w x h): 4,560 x 2,230 x 1,780 mm, weight approx.: 1,958 kg

3,600 cbm/h Stacker With Tripper Car immediately available for re-location from SE-European mine; machine is still powered and can be tested as needed medium-size stacker for rail based stock yard use, to be flexibly used to stack loose soil, sand, waste, coal etc. boom length: 30 m; slewing angle: +/- 105 degree; boom luffing above ground: 2.0 to 13.3 m spreader on rails, luffing and slew able boom; incl. tripper car for a 1,400 mm belt at 5 m/s speed; boom conveyor drive and slew drive: electro mechanical; Boom Luffing: Winch; Total operating weight: approx. 280 + 65 t

Delivery options used mining technology: Offers Mining machinery and plants Abrasion-resistant materials Cables, hoses and pipes Chains and wire ropes Chemicals and reagents Communications Systems and Equipment Continuous miner and cutting device Control and Automation Systems Conveyors, components and accessories Crushers, crushers and grinding plants Dredging and Dredge Equipment Drilling and blasting Electrical appliances, batteries and lighting Engines, electric and diesel Environmental and Emissions Control Manufacture and processing Flotation, agglomeration and filtering Seals and closures Health and safety service and equipment Heating, ventilation and air conditioning Hydraulics and electromechanical equipment Loader, truck and forwarding agent Mining locomotives Mining Wagons Heavy opencast mine Rail & Systems Noise,  ...

Binding press, completely made of stainless steel (frame & all rollers) Bandwidth 1450mm, L x W x H: 4450 x 2100 x 2450mm. Processing capacity with apples approx. 4-6 t/h. Year of construction 1994 Other fruits, berries and vegetables are also possible. No compressed air needed! No complex control necessary! Belt tension by means of 2 pcs. 5t. crank winches and 2 steel springs Very little trub in the juice because no shear effect of 2 bands! Rotary brush & 2 rotary high-pressure nozzles for belt cleaning. This press is an improved replica of an (Amos Compact cover press, see Prospeckt from Amos) in contrast to the Amos press, all rollers in our press are completely made of stainless steel and with continuous shaft (not only shaft stumps) as well as in the interior again amplifier discs to significantly increase the stability of the rollers. The rollers lurk on plain bearings t ...

Concrete spraying machine Manufacturer Montanbüro Type e.B. Elefantion Unused! Other unused and used concrete spraying machines in stock Also water pumps with e.B. Centrifugal pump Flow rate 150m³ at head 750m! If you are interested, please ask! Other machines: 216 TIG welding machine Dalex TGKW 352 AC/DC 217 Dalex LDE 400 inert gas welder 218 Welding fume extraction Dalex 64111 222 items of rotary/butterfly valves 228 items filter mats for building material plants 229 items Control cabinets 230 3 items submersible pumps 231 2 submersible pumps DV80ABS 233 Centrifugal pump LHK 125x10 SE G150 234 compressed air predatory winches pulling force 10to 235 Concrete spraying machine Aliva 237 Concrete spraying machine Aliva 238 11 centrifugal pumps 240 2 high pressure pumps TP 300/42/48 213KP pneumatic 241 4 lifting/trasn sport beams pneumatic, 2x30/40 kN, witho ...

PTO, cardan shaft -Admission: 1 3/8 6 teeth (Ø 35 mm) -Length: 80-100 cm -They are suitable for fertilizer spreaders, field sprayers, band or circular saws, forestry winches, wood splitters, hay tedders, rotary rakes, loading wagons and many other units -Number: 10x PTO shafts available -Price: per piece -Weight: 16 kg/piece

ID3203 Wellco-Drill WD500 year/Year of construction 1994 approx. 2780 hours/ hours Drilling rig, crown regulating load 100 kN, crown extraction load 100 kN, hydraulic power jetting head (torque 10,000 Nm), drilling pressure max. 55 kN, tractive force 55 kN, interception device max. 219 mm, 2 winches, centrifugal pump, piston pump        Drilling rig, crown control load 100 kN, crown exception load 100 kN, hydr. Power flushing head (torque 10,000 Nm), drilling pressure max. 55 kN, tensile force 55 kN, interceptor max. 219 mm, 2 winches, centrifugal pump, piston pump

Used radial drilling machine Int. Art. Ref. m3531 Manufacturer: BREDA Type R45-1210 Drilling performance - solid, steel 45 mm - solid, cast 55 mm Drilling with reduced feed rate - Steel 50 mm - Cast 65 mm Drilling - Steel 70 mm - Cast 90 mm Boring - Steel 80 mm - Casting 100 mm Tapping, ascending winches - Steel 40 mm - Cast 50 mm Tapping, fine threading - Steel 45x1.5 - Casting 55x2 Quill diameter 76 mm Quill stroke 280 mm Morse Cone MK 5 Speeds 12 Feeds 4 Usable projection 1,200 mm Max. swivel radius 1,350 mm Min. swivel radius 410 mm Drill head travel 940 mm Distance from the drilling spindle to the base plate max. 1,420 mm min. 535 mm Vertical boom travel 600 mm Diameter of the column 280 mm Total power approx. 6 hp Machine weight approx. 2.1 t Total weight with 2 cubes and cabinet approx. 3,000 kg Instructions available Loc ...