wide used for sale

Flat cutter 315 mm

Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 80 mm -Milling height: 75 mm -Adjustment: SK50 -Manufacturer: WIDIA -Type: 06306 Widax M30 -Number: 3x milling cutters available -Price: per piece -Dimensions: 224/100/H100 mm -Weight: 5.6 kg

End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool -Diameter: 40 mm -Working height: 50 mm -Recording: SK50 -Weight: 4 kg

VISION WIDE VB-2016 5-AXIS CNC gantry milling machine was manufactured in 2013 in Taiwan. The machine performs precision machining of heavy workpieces in three or even five axes, once the automatic swivel head is mounted to the vertical spindle. The machine’s top-quality cast-iron structure is rigid and resistant to bending stress, thus perfectly dampening the vibrations and oscillations generated during machining. The VISION WIDE VTEC VB 2016 CNC gantry milling machine centre is equipped with safety guards fitted around the entire machine with sliding doors that open flush with the X-axis travel. Inside, there is a large work table with a length of 2000 mm and a width of 1300 mm, which is supported along the entire length of the longitudinal travel and guided by two sliding guideways, making it possible to machine heavy workpieces even when the table is unevenly loaded. Two scre ...

General SKU290S402 LocationBarneveld MakeF. Widmann & Sohn Apparatebau (D) Type160 Ltr. No.1346B-3 Year of construction1966 Pressure Working pressure jacket4 Bar Main Features MaterialStainless steel Volume160 Ltr. Specified Features - Cooking pan Cooking vesselcheck Capacity160 ltr. Vessel sizesdia. 680x600mm With jacket31 ltr. Without motorcheck Vessel can be tiltedcheck MaterialStainless steel 1.4541 (321) Information Floorspace1,4x1,1 M Total height1,0 M Weight150 KgCooking pansF. Widmann & Sohn ApparatebauStirring vessels > Cooking pansBrand > F. Widmann & Sohn Apparatebau What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Turning tool with indexable cutting jaws, clamp holder, turning tool, indexable insert holder, turning tool, indexable insert steel, -Manufacturer: WIDIA WIDAX, clamp holder turning chisel in original packaging -Type: WIDAX SRDCN 2525 -Dimensions of cardboard: 150/25/H25 mm -Weight: 0.6 kg

This 3-axis Vision Wide SE-2112 CNC milling machine was manufactured in 2018. Ideal for precision milling, it offers robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the Vision Wide SE-2112 machine we have for sale. Contact us for more information.

50 pcs tool cassettes for inserts Fabr. Widax-Heinlein

Cutter head, milling adapter, carbide milling cutter, indexable insert milling cutter, face milling head, milling head -Manufacturer: Widax-Heinlein diameter 173 mm -Type: M400 Ø160 R 12 607 -Number of teeth: 12 -Adjustment: SK50 -Dimensions: Ø 173/260 mm -Weight: 12 kg

Reamers, solid drills, indexable insert drills, indexable insert drills with internal cooling, indexable insert solid drills -Widax: Indexable insert drill with internal cooling -Type: 21676017 Ø 66 mm -Hole: Ø 60 mm -Dimensions: Ø 123 x 310 mm -Weight: 7.4 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, corner milling cutter -Manufacturer: Widax-Heinlein, face milling cutter SK50 -Type: M100 239.10.220 Ø80 41005 -Number of teeth: 6 -Dimensions: 95/90/H230 mm -Weight: 4.0 kg

shell end mills, indexable insert mills, porcupine mills, milling tools -Manufacturer: Widax-Heinlein, shell end mills, indexable insert milling cutters SK50 -Type: M30 229.34.800 7 04 09 -Diameter: 61 mm, without inserts -Dimensions: Ø 97 x 235 mm -Weight: 3.8 kg

Turning tool with indexable cutting jaws, tool holder, turning tool, indexable insert holder, turning tool, indexable insert steel -Dimensions: 150/25 mm -Price: per piece -Number: 2x available -with: 20x Widia plates each -Weight: 1 kg

3D probe WIDAX 25612114 35910 holder: BT40 Dimensions: 280 x 65 x 65 mm

Angle milling cutters, indexable insert milling cutters WIDAX, HEINLEIN, WIDIA 01-000546-002-2 274.274.06.119.00 diameter: Ø 242 mm 6 cutting edges with 6 holders each for inserts bore: Ø 31 mm (milling cutter side) / Ø 21 mm / Ø 40 mm (rear) flange (rear) Ø 90 mm groove width (rear) 16 mm, Depth 10 mm New ! Dimensions: 250 x 250 x 90 mm

VISION WIDE SF-2116 CNC PORTAL MILLING MACHINE Year of construction 2016 Fanuc 31i ModelB Table : 2000 X 1500 mm X-axis travel 2000 mm Y-axis travel 1500 mm Z-axis travel 800 mm Engine power: 44 kW With tool changer Total weight : 20t approx. Horizontal Head 90 Degree

WR FEEDER LABEL 500L, DEMONSTRATION SYSTEM - Technically overhauled and cleaned by the manufacturer!, - Friction feeder with 500 mm product width in the long version, - Encoder kit 1000 pulses, - ALTECH labeler, - Control system for ALTECH, - Automatic delivery with programmable descent, - Stand with H-base on casters, WR FEEDER LABEL is a system for separating and labelling cartons and bags. The encoder enables perfect synchronisation between the removal speed and the output speed of the labels, guaranteeing high accuracy when applying the labels.

Manufacturer: Widmann Model: SI 100 - Top Year of Manufacture: 2022 Certification: CE Electrical Data: - Apparent Power: 42 kVA - Frequency: 50/60 Hz - Voltage: 3 x 400 V / N / PE - Current: 80 A Machine Cycles: 695,067 - Total Cycles: 810,321 - Total Operating Hours: 268 h Find more here - / Contact us at -

Arbor Ø: 30 mm Mandrel length: 135 mm width: 600 mm length: 1.000 mm height: 1.400 mm WIDMA tool sharpening machine for grinding and sharpening tools or for machining complex geometric shapes. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 67 mm -Milling height: 150 mm -Adjustment: SK50 -Manufacturer: WIDIA -4x milling cutter type: KRE80-301-10 -6x milling cutter type: KRE80-300-11 -2x milling cutter type: KRE80-301-20 -3x milling cutter type: KRE80-301-30 -Weight: 15 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, corner milling cutter -Manufacturer: Widax-Heinlein, corner milling cutter -Type: M680 239.69.058 Ø160 -Number of teeth: 12, without indexable inserts -Hole diameter: 40 mm / bolt circle diameter 67 x 14 mm -Dimensions: Ø 160x 60 mm -Weight: 3.4 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, corner milling cutter -Manufacturer: Widax-Heinlein, corner milling cutter -Type: M400 Ø200 R10 51111 / M400 239.42.342 Ø200 51104 -Number of teeth: 10, without indexable inserts -Hole diameter: 60 mm / bolt circle diameter 100 x 18 mm -Dimensions: Ø 200x 60 mm -Weight: 8.1 kg

100 x ball form 3 mm, 100 x ball shape 5 mm (shank 3), 100 x cylinder shape 2 mm (shank 3), 100 x rolls round form 3 mm, 100 x rolls round shape new and in 100 he packed 6 mm (shank 3), boxes, rolls round cutter 3 mm packed individually. List price (list price) CA EUR 5.00 piece.

Grinding wheel puller, cup wheel puller, double bench grinder puller, flat grinder puller, cylindrical grinder puller, puller head, dressing head for grinding machines -Edition: mm -Number: 1x disc puller available -Price: per piece -Dimensions: 310/170/H200 mm -Weight: 6.7 kg

end mill, end mill, milling cutter -Condition: Like new -Diameter: 50 mm -Working height: 100 mm -carbide-tipped -Recording: SK50

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Turning tool inclination: 107.5° -Dimensions: 150/30/H25 mm -Weight: 0.7 kg

tool clamping area: Ø 30 mm Shipping weight: 50 kg Packing: ca. 600400200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding wheel pullers, cup wheel pullers, double bench grinder pullers, surface grinder pullers, cylindrical grinder pullers, dressing heads, dressing heads for grinding machines -Coverage: 255 mm -Quantity: 1x disc puller included Price: per piece -Dimensions: 510/165/H290 mm -Weight: 34 kg

DREHER GRANULATOR, Mod. S26 - 41 GF, 410 mm rotor width, 260 mm rotor Ø, 11 kw drive (or lower), control panel, Average throughput rate 250 kg/h, Machine offered totally reconditioned, Suitable to reuse self-produced plastic scraps, installed power - used power in work: about 60-65% : 11 kW, availability: 3 weeks, working width: 410 mm, options available: lower power, capacity: 250 kg/h, conditions: reconditioned with sworn appraisal

CATALOG NUMBER 6145 TECHNICAL DATA - max workpiece width 1100mm - max workpiece height 140mm 3 aggregates: 1) grooved rubber roller for 15kW calibration 2) grooved rubber roller for 11kW calibration 3) grooved rubber roller for 11kW calibration in advance: - metal skid roller - rubber skid roller - aggregate - 2 rubber rollers, sliding - aggregate - 2 rubber skid rollers - aggregate - rubber skid roller from down: - feeding table 3600x1000mm - feed speed adjustable on the inverter 0.25kW - pulling tape - 3 rubber rollers, sliding, leading out - oscillation of pneumatic strips on photocells - blowing off the tapes - electric table lifting - 0.75kW motor lifting - smooth regulation of the feed speed - 2.2kW feed motor - with a vacum pump - 4kW pump motor - diameter of the extraction port 110mm, 80mm - working pressure 6-8bar - diameter of the extraction port 3 ...

Key data: 190 mm, 2

Grinding Machine HESS Double-Sided Grinding Machine Type: GLORIA Year of Make: 1995 CE Grinding width 190 mm Grinding thickness 4 – 180 mm Sanding shoe and brush from above Sanding shoe and brush from below Oxyd ceramics are wear-free and therefore maintenance-free Motorized height adjustment with digital display Shortest workpiece length 300 mm oscillating abrasive belts Sanding belt blow-off nozzle Workpiece transport via conveyor belts Sanding belt width 200 mm x sanding belt length 1600 mm Grinding motor 2 x 4 kW Feed speed infinitely variable 5-25 m/min. Feed motor 0.75 kW Height adjustment 0.18 kW Sanding belt speed 24 m/sec. Working height – table height 830 mm Suction connection nozzle diameter 2 x 160 mm Extraction air volume 2x2000-2500 m³/h Machine dimensions: Length 1660 mm x width 1030 mm x height 1820 mm Height with suction nozzle 1930 mm  ...

Key data: 1350 mm, 1

- Working width 1350 mm - Rubberized pressure rollers - Roller table at the inlet and outlet - Belt feed speed 2.5-13 m/min, infinitely adjustable, perforated belt (prepared for vacuum tensioning device by external, not included drive motor) - Combi-contact roller-grinding unit (15 kW), with electr link pressure bar (element width 25 mm), belt speed infinitely variable from 2.5 to 20 m/s, belt length/width 2150/1370 mm, belt blow-off device, sanding shoe rest in the machine, pneum. Abrasive belt tensioning device - 1 rotating workpiece cleaning brush (0.75 kW) on the outlet side of the machine - Paintwork: RAL 5018 - Total connected load approx. 22 kW (36 A) - Operating voltage: 400 V, 50 Hz Technical data subject to actual equipment The sale is carried out on behalf of the owner from the current location, in the condition as existing, excl. Warranty.

working width: 950 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; read out height: digital; electronic control: Fox 500 KTR; aggregates: 1; 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad; dust brush: no; motor power: 7,5 kW; suction connection: 140 mm; machine length: 1388 mm; machine width: 1545 mm; machine height: 1668 mm; weight: 660 kg; - Also for smaller craft shops for occasional use - Combination sanding unit with sanding shoe for fine sanding - Standard with diagonally grooved steel roller Ø 120 mm for calibration - Fine adjustment of the working height - Clear control panel on the front - Robust tube-stiffened monobloc steel machine body, robot welded, high-mounted working units for maximum rigid ...

Properties < b >: < / b > Used belt conveyor Color: grey SEW geared motor available Feet to be ordered separately Material: Steel Ideal for the fast material handling Expertly disassembled and packed Condition: fully operational Technical data < b >: Mass of the belt conveyor < /b > Overall length: 1,040 mm Overall width: 700 mm the belt < /b > details < b > Belt width: 600 mm Belt type: smooth the framework < /b > details < b > Frame height: 160mm the motor < /b > details < b > SEW-EURODRIVE Type: R27 DT90S4/BMG/HR kW: 11 Belt conveyor < b > < /b > The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. During transport, the belt conveyor can promote sensitive and different-sized containers, boxes or other packaging and a ...

Technical data for the wide-span rack traverse: Shelving system: Stow Type: Midirack Included in delivery are: 01x Wide-span shelf traverse, used Material color: yellow ZM profile: 75 x 30 mm Traverse type: MNZBG 2274 Agraffe: 2 HK (hooks) Clear width: 2,700 mm 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting Note: The trusses are laid out for the recording of Particleboard with a thickness of approx. 22 mm General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed  ...

Key data: 1100 , 2 , 160

TECHNICAL DATA LIBRA 35 - 110 Usable working width 1100 mm min. and max. working height 4 ÷ 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Motor power 400 V 50 Hz 11 (15) kW (HP) 2 carpet feed speeds 4.5/9 m/min Feed motor 0.3/0.55 Elastic link grinding shoe (sector spacing 56) With 20 sectors with adjustable pressure and with 2 contact inserts 1. Semi-hard contact insert made of a flexible steel foil with felt (density 0.68) and graphite coating (suitable for sanding veneered panels and solid wood) 2. Soft contact insert made of a flexible steel foil with rubber and felt (density 0.68) and graphite coating (suitable for grinding veneered or painted panels) Unit R: - with ribbed steel roller ø 120 mm and decimal correction of grain/strip thickness Combi unit TC: - with rubber-coated roller 45 Sh ø 120 mm and decimal correction of grain/strip thickness - H ...

Key data: 1350 , 2 , 160

Grinding width 1350 mm Material thickness 4-170 mm Sanding belt size 1370 x 2150 mm Feed 4.5 and 9 m/min Main engine 20 HP/15kw V 400/3/50 EU Premium Package Y: - on/off calibration roller 2nd unit from the control panel - on/off grinding roller 2nd unit from the control panel - split pneumatic sanding shoe (segment width 56) - Control FOX 500 KRT - Automatic electronic positioning control - Automatic carpet centering - Table extension with 2 rollers for input and output - CE version - Machine in orig. scm packaging

Key data: 1100 , 1 , 160

TECHNICAL DATA LIBRA 35 - 110 Usable working width 1100 mm min. and max. working height 4 ÷ 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Motor power 400 V 50 Hz 11 (15) kW (HP) 2 carpet feed speeds 4.5/9 m/min Feed motor 0.3/0.55 Combi unit TC with: - with ribbed steel roller ø 120 mm and decimal correction of grain/strip thickness - Hard sanding shoe (density 0.68) with graphite coating and decimal correction of grain/strip thickness - Switching the sanding shoe on and off from the control panel via pneumatic cylinders. Decimal setting position sanding shoe the grain size/strip thickness - AUTOMATIC CARPET CENTERING

Technical data for the wide-span rack beam: Shelving system: Jung Heinrich Type: G The scope of delivery includes: 01x Wide-span shelving beam, used Material colour: RAL 1007 yellow Z-profile: 50 x 30 mm Agraffe: 3 HK (hook) clear width: 2,145 mm 02x locking pins, used Version: complete. galvanized To secure the longitudinal beams against unintentional lifting General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Bütfering Wide belt sanding machine FBS 800 Product name: Wide belt grinding machine Type: FBS 800 Manufacturer: Gebrüder Bütfering Machine number: 83221 Year of construction: 1983 Condition: Used Technical details: - for solid wood - Grinding width: 800 mm - Strap width: 810 mm - Band length: 1,900 mm - Workpiece thickness: max. 90 mm - Feed speed: 10 and 20 m/min - Power requirement sanding belt drive: 15hp optional 20 hp - Feed drive: 1/1.5 hp - Cleaning brush: 0.75 hp - Weight: approx. 1,800 kg - Cleaning brush on the spout side (2x) - pneumatic belt tensioning Engine data: - Voltage: 380 V (note the direction of travel) - Current: A 2.8 / 22.4 - Power: 1.1 / 11.0 kW - Revolution: 1450 / U1=2,800, U2=3,060 Suction: - 3 x suction nozzles: diameter 140 mm, 160 mm, 200 mm Retrofitting/reassembly of a small table for acc ...

Grinding wheel, surface grinder, grinding belt, wide belt -Manufacturer: VSM, Wide belt sanding strip 1350 x 2620 mm 2 pieces -Type: SMA Form E13 Series KP510E -Grain size: 180 -Price/Fee: complete -Carton dimensions: 1480/260/H330 mm -Weight: 5.3 kg

Key data: 1100 mm, 1 , 150 mm

Combination grinding unit with contact roller and air grinding shoe Brush roller Abrasive belt tension, pneumatic motor strength adjustment Specifications: max. working width 1100 mm Max. workpiece thickness 150 mm Min. workpiece thickness 3 mm Sanding belt dimensions 1900 x 1120 mm Feed speed 5/10 m/min. Motor power grinding unit 15 kW Motor power height adjustment 0.50 kW Motor power feed carpet 0.5/1.0kW Operating pressure 6 bar Air pressure approx. 20 l/min Suction nozzle 2 x 200 mm Weight approx. 2100 kg Machine width approx. 1750 mm Cntaou7R Machine depth approx. 1700 mm Machine height approx. 1900 mm

Wide-belt sanding machine HOUFEK SPB Buldog 5 RC -Exhibition machine-Including: - Wide-belt sanding machine HOUFEK SPB Buldog 5 RC Working width: 1,350 mm Included: - Steel roller grooved à 160 mm HOUFEK Including: - Segmenter sanding shoe HOUFEK electronically controlled, for width 1,350 mm Sanding shoe PS 50 E Includes NC control with 10.1 touchscreen frequency converter for the SC

PART NUMBER: 7549 Specifications: - max width of the workpiece 1100mm - max height of the workpiece 170mm 2 units: 1) grooved rubber roller for calibrating 2) rubber roller + boot boot + metal roller –in advance: - metal roller, slip - aggregate - metal roller, slip - A unit with a shoe - metal slip outfeed roller – from below: - Pulling strap - pneumatic oscillation of the belts - electric lifting of the table top - 2 types of feed speeds - 11kW motor - with pneumatic brake - working pressure 6-8bar - extraction spigot diameter 2x150mm - total dimensions length/width/height 1960x1700x2000mm - weight about 2000kg ADVANTAGES – made in Germany – 2 units – unpainted – used grinder, very good condition Net price: 34900 PLN Net price: 8116 EUR depending on the price 4.30 EUR (Prices may change with higher fluctuations)

PART NUMBER: 7514 Specifications: - max width of the workpiece 900mm - max height of the workpiece 160mm -in advance: - metal roller, slip - aggregate - grooved metal roller for calibration + shoe + metal roller - rubber roller, slip - from below: - 2 metal rollers, slip - Pulling strap - 2 metal rollers, slip - pneumatic oscillation of the belts - 2 types of feed speeds - electric table lifting - brake - grinding thickness potentiometer - main motor 11kW - working pressure 6-8bar - diameter of the extraction spigot 160mm - dimensions length/width/height 1600x1450x1800mm – weight 820kg ADVANTAGES – Italian production – unpainted – used grinder, very good condition Net price: 28900 PLN Net price: 6721 EUR depending on the price of 4.30 EUR (Prices may change with higher fluctuations)

PART NUMBER: 7518 Specifications: - shaft width 810mm - number of knives 4 pcs - max thickness of the workpiece 250mm in advance: -Triggers - toothed insertion shaft, pulling shaft -Clamps - planing roller -Clamps - smooth, pulling outfeed shaft from below: - adjustable rollers in the bottom top 2 pcs - 7.5kW motor - electric lifting of the table top - 0.5kW lifting motor - 4 types of feed speeds -brake - extraction spigot diameter 160mm - dimensions length/width/height 1350x1450x1700mm - weight about 1100kg ADVANTAGES – Polish production – electric lifting of the table top – used thicknesser, very good condition Net price: 25900 PLN Net price: 6023 EUR depending on the price of 4.30 EUR (Prices may change with higher fluctuations)

Technical data of the box rack: Shelving system: Stow Type: Midirack Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 1,910 mm Number of fields per row of shelves: 01 pcs. The scope of delivery includes: 02x Shelf stand, used Material colour: sendzimir galvanised Column profile dimensions: 55 x 45 x 1.5 mm incl. cross and diagonal struts, Footplates The stands are pre-assembled 2,000 mm high 600 mm deep 10x Shelf trusses, used Material color: white Z-profile: 77 x 32 mm Weight | Pcs.: approx. 3.95 kg Clasp: 2 HK (hooks) Clear width: 1,800 mm 20x Locking pins, used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional lifting 05x Particleboard, used Thickness: 38 mm Width: approx. 1,800 mm Depth: approx. 600 mm Surface: coated if necessary (possibly in two parts) 20 ...