wide used for sale

Grinding machine Heesemann type MFA 8 Specifications: • Working width (mm): 1300 • CSD system • Transverse grinding unit • Longitudinal grinding unit - shoe • Brush unit • Ionization • Vacuum carpet

– after technical inspection – very good condition – German production – year of production 1996 – segmented shoe - the perfect solution for varnish / veneer TECHNICAL PARAMETERS: grinding width 1100 mm grinding height 1-150 mm Combo unit with task-controlled membrane grinding shoe aggregate motor power 11 kW blowing on the tape pneumatic oscillation two types of belt speeds of 4.5 and 18 m/s Aggregate with felt shaft engine power 0.75 kW shaft oscillation Unit with cleaning brush engine power 0.75 kW smoothly adjustable feed feed speed range 4-18 m/min feed motor power 1.5 kW electric height adjustment vacuum table fan motor power 3 kW connector diameters 4 x 120 mm, 1 x 150 mm transport dimensions (L/W/H) 200 x 245 x 210 cm weight 2500 kg 1. The Alpha Combi unit is a grinding unit with a contact shaft with a dia ...

– Italian production – transverse aggregate, the so-called sergeant – year of manufacture 2011 – electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum element length 365 mm vacuum table 1 unit: transverse tape, the so-called sergeant engine power 12 kW 2 aggregate: rubber shaft hardness 95 shore diameter 240 mm engine power 18.5 kW 3 aggregate: rubber shaft hardness 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe engine power 15 kW 5 unit – cleaning brush 2.2 kW 6 aggregate – blowing blowing on the tape pneumatic oscillation feed speed 2,5 - 18 m/min pneumatic tape tension electric height adjustment connection diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (L/W/H) 370 / 250 / 250 cm weig ...

– Italian production –Ce – automatic table positioning – year of production 1999 TECHNICAL PARAMETERS: grinding width 900 mm grinding height 165 mm 2 steel shafts pneumatic oscillation electric height adjustment two types of feed speed engine power 11 kW minimum element length 300 mm connection diameter 2 x 160 mm dimensions of the machine (L/W/H) 150 / 115 / 200 cm weight 700 kg

– after technical inspection TECHNICAL PARAMETERS: .max. workpiece width 110 cm .max. workpiece height 16 cm 2 aggregates: 1) AGGREGATE RUBBER roller 2) aggregate with combo boot with pneumatic pressure rollers, rubber, pressure between aggregates oscillation of pneumatic tapes automatic belt centering system potentiometer for setting the planing thickness FEED SPEED SMOOTHLY ADJUSTABLE power of the first unit 18,5 kW power of the second unit 11 kW working pressure 6-8 bar extraction connection diameter 2 x 250 mm dimensions (L/W/H) 195 / 185 / 215 cm weight 1750 kg

– after technical inspection – very good condition TECHNICAL PARAMETERS: maximum grinding width 1100 mm maximum element height 160 mm minimum grinding height 3 mm main engines 2 x 11 kW feed motor 2,2 kW height adjustment motors 0,37 kW 1 65 shore rubber shaft with a diameter of 270 mm 2 45 shore rubber shaft with a diameter of 400 mm belt size 2600 x 1050 mm two types of feed speed pneumatic oscillation at the ends connection diameter 2 x 150 mm tape in very good condition dimensions (L/W/H) 280 / 180 / 250 cm weight ~ 2600 kg

- very good condition - year of manufacture 1993 - Heesemann electronic PLC control - model / type LSM 6 TECHNICAL PARAMETERS: working width of grinding 1350 mm thickness max. ground elements 150 mm MACHINE CONFIGURATION: I- cross-cross aggregate with sequential electronic pressure main engine 13 KW pneumatic oscillation of the photocell extraction output 1 x 180 mm grinding belt size 5480 x 150 mm II- combo unit with boot main engine 13 KW grinding belt cleaning system with oscillation shoe with pneumatic clamp pneumatic oscillation of the photocell extraction output fi.1 x 180 mm grinding belt size 2620 x 1350 mm PNEUMATIC OSCILLATION OF THE PHOTOCELL pneumatic strip system with oscillation cleaning tapes III- combo unit with boot main engine 13 KW grinding belt cleaning system shoe with pneumatic clamp output to the extractor fi. 1 ...

Ce execution V. 400/50 Electronic table positioning Automatic carpet centering Grinding width 950 mm Combi unit Table extension rear and front

TECHNICAL DATA LIBRA 35 - 110 Usable working width 1100 mm min. and max. working height 4 ÷ 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Motor power 400 V 50 Hz 11 (15) kW (HP) 2 carpet feed speeds 4.5/9 m/min Feed motor 0.3/0.55 Combi unit TC with: - with ribbed steel roller ø 120 mm and decimal correction of grain/strip thickness - Hard sanding shoe (density 0.68) with graphite coating and decimal correction of grain/strip thickness - Switching the sanding shoe on and off from the control panel via pneumatic cylinders. Decimal setting position sanding shoe the grain size/strip thickness - AUTOMATIC CARPET CENTERING

Grinding width 1350 mm Material thickness 4-170 mm Sanding belt size 1370 x 2150 mm Feed 4.5 and 9 m/min Main engine 20 HP/15kw V 400/3/50 EU Premium Package Y: - on/off calibration roller 2nd unit from the control panel - on/off grinding roller 2nd unit from the control panel - split pneumatic sanding shoe (segment width 56) - Control FOX 500 KRT - Automatic electronic positioning control - Automatic carpet centering - Table extension with 2 rollers for input and output - CE version - Machine in orig. scm packaging

TECHNICAL DATA LIBRA 35 - 110 Usable working width 1100 mm min. and max. working height 4 ÷ 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Motor power 400 V 50 Hz 11 (15) kW (HP) 2 carpet feed speeds 4.5/9 m/min Feed motor 0.3/0.55 Elastic link grinding shoe (sector spacing 56) With 20 sectors with adjustable pressure and with 2 contact inserts 1. Semi-hard contact insert made of a flexible steel foil with felt (density 0.68) and graphite coating (suitable for sanding veneered panels and solid wood) 2. Soft contact insert made of a flexible steel foil with rubber and felt (density 0.68) and graphite coating (suitable for grinding veneered or painted panels) Unit R: - with ribbed steel roller ø 120 mm and decimal correction of grain/strip thickness Combi unit TC: - with rubber-coated roller 45 Sh ø 120 mm and decimal correction of grain/strip thickness - H ...

Belt sander Boere TKS 1300 380V Maximum sanding width 1300mm Maximum sanding height 150mm 1st: sanding aggregate roller Motor 30 kW Roll diameter 250mm 2nd: Sanding aggregate sanding pad Engine 15kW (20HP) 2x steel roller Transport dimensions: 2400x1600x2400mm (LxWxH), Weight 4500kg

Belt sander Boere Sandrite 1100C 380V Maximum sanding width 1100mm Maximum sanding height 150mm Sanding unit KOMBI Engine 11kW (15HP) Transport dimensions: 1800x1300x2100mm (LxWxH), Weight 1850kg

Engine 15Hp Throughput min/max 4-20 m/min Roller conveyor entry 300mm Roller conveyor output 300mm

Sanding height max. 3-150mm ; Throughput: 6-12m/min

Equipped with 3 sanding units. The sizes include mobile roller conveyors. You are responsible for dismantling and transporting this lot. There are no tools available.

Top-bottom sander Houfek SPB 1300 Duplex Serial Number SJ-031 Year of construction 2017 Min-maximum workpiece height 10-160 mm Maximum working width 1300 mm Throughput 4/12 m/min Sanding belt dimensions 19001320mm Motors 11kW Upper sander 2x contactals 1x Combi roller Sander 2x contactals 1x Combi roller CD software available Including manifold for extraction line 110.4kW, 223Amp.

Belt sander SCM Sandya 10 S M2 110 Year of construction 1999 Sanding belt dimensions 2620x1115mm 380V 1st sanding unit Contact coil 180mm Motor 18.5kW 2nd sanding unit Combi generator with sanding pad Motor 11kW Sanding width max 1100mm Sanding height Min/max 4/170mm Throughput 4.5-9 m/mins Dimensions 2300x2205x2500mm, weight 1850kg

working width: 950 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; read out height: digital; electronic control: Fox 500 KTR; aggregates: 1; 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad; dust brush: no; motor power: 7,5 kW; suction connection: 140 mm; machine length: 1388 mm; machine width: 1545 mm; machine height: 1668 mm; weight: 660 kg; - Also for smaller craft shops for occasional use - Combination sanding unit with sanding shoe for fine sanding - Standard with diagonally grooved steel roller Ø 120 mm for calibration - Fine adjustment of the working height - Clear control panel on the front - Robust tube-stiffened monobloc steel machine body, robot welded, high-mounted working units for maximum rigid ...

Belt sander Boere Merite 1000 KC Maximum sanding width 1000mm Maximum sanding height 150mm Sanding belt dimensions 10101900mm Variable flow rate min-max 3-16.5 m/min Output roller conveyor 300mm 1st Sanding unit Kontactrol 2nd Abrasive unit Kombi Motor 18.5kW 380V Transport dimensions: 1800x1600x2100mm (LxWxH), Weight 1500kg

Belt sander Timesavers 900 WWS Year of construction 2006 Serial number 2217/043 units, pre-deburring, deburring, finishing belt 900 mm throughput max. 150 mm50 Hz, 400 V, 58 kW Dimensions: 3500 x 1900 x H2100 mm, weight 4000kg

BOERE sanding line 'Compact'' Elite Year of construction 2002 (CE) Operating hours 27518 Maximum height 150 mm Maximum width 1100 mm Elite BKKS 1100 First generator 30kW motor Second generator 18.5kW motor Third generator 15kW motor Voltage 380V, 128Amp Elite TKKS 1100 First generator 30kW motor Second generator 18.5kW motor Third generator 15kW motor Voltage 380V, 117Amp

Belt sander Sagrima Holland W2 1350 URP, CE Sanding belts 1350900mm Maximum sanding width 1350 mm Year of construction 1997 400V, 63Amp. Required extraction capacity 7200m³/h. Machine has a bad tire.

5.75 M LONG-SPAN SHELVING 60CM DEEP, WORKSHOP SHELVING, STORAGE SHELVING, LARGE SHELVING, MANUAL STORAGE, SHELVING RACKS, Data: H : approx. 200 cm D : approx. 60 cm L : ca. 5,76 m Shelf offer consisting of: 04 x frame approx. 200 x 60 cm, disassembled. 24 x truss approx. 185 cm. 12 x support base approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg shelf load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6€/net per piece. Delivery on request by us is possible at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price: 620,00 € Net plus statutory VAT. You will receive an invoice with VAT.

7.65 M LONG-SPAN RACKS 60CM DEEP, WORKSHOP RACKS, STORAGE RACKS, LARGE SHELVING, HAND STORAGE, SHELVING RACKS, Data: H : approx. 200 cm D : approx. 60 cm L : approx. 7.66 m Shelf offer consisting of: 05 x frame approx. 200 x 60 cm, disassembled. 32 x truss approx. 185 cm. 16 x support shelf approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg shelf load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6€/net per piece. Delivery on request by us is possible at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price: 815,00 € Net plus statutory VAT. You will receive an invoice with VAT.

9.56 M LONG-SPAN SHELVING 60CM DEEP, WORKSHOP SHELVING, STORAGE SHELVING, LARGE SHELVING, MANUAL STORAGE, SHELVING RACKS, Data: H : approx. 200 cm D : approx. 60 cm L : approx. 9.56 m Shelf offer consisting of: 06 x frame approx. 200 x 60 cm, disassembled. 40 x truss approx. 185 cm. 20 x support shelf approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg shelf load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6€/net per piece. Delivery on request by us is possible at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price: 1010,00 € Net plus statutory VAT. You will receive an invoice with VAT.

13.36 M LONG-SPAN RACKS 60CM DEEP, WORKSHOP RACKS, STORAGE RACKS, LARGE SHELVING, MANUAL STORAGE, SHELVING RACKS, Data: H : approx. 200 cm D : approx. 60 cm L : ca. 13,36 rm Shelf offer consisting of: 08 x frame approx. 200 x 60 cm, disassembled. 56 x truss approx. 185 cm. 28 x support shelf approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg shelf load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6€/net per piece. Delivery on request by us is possible at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price: 1400,00 € Net plus statutory VAT. You will receive an invoice with VAT.

28.55 M LONG-SPAN SHELVING 60CM DEEP, WORKSHOP SHELVING, STORAGE SHELVING, LARGE SHELVING, MANUAL STORAGE, SHELVING RACKS, Data: H : approx. 200 cm D : approx. 60 cm L : approx. 28,55 m Shelf offer consisting of: 16 x frame approx. 200 x 60 cm, disassembled. 90 x truss approx. 185 cm. 45 x support shelf approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg shelf load, with evenly distributed load. Levels: 3 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6€/net per piece. Delivery on request by us is possible at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price: 2360,00 € Net plus statutory VAT. You will receive an invoice with VAT.

57 M LONG-SPAN RACKS 60CM DEEP, WORKSHOP RACKS, STORAGE RACKS, LARGE SHELVING, HAND STORAGE, SHELVING RACKS, Data: H : approx. 200 cm D : approx. 60 cm L : ca. 57 rm Shelf offer consisting of: 031 x Frame approx. 200 x 60 cm, disassembled. 240 x truss approx. 185 cm. 120 x support shelf approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg shelf load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6€/net per piece. Delivery on request by us is possible at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price: 5885,00 € Net plus statutory VAT. You will receive an invoice with VAT.

Usefull width: 1030 mm. Sanding belt sizes: 1060 x 1900 mm. Number of sanding units: 3 Roller 15 kW, Roller 15 kW, Pad 11 kW Max. pass in thickness: 200 mm. Feed speeds: 5 and 10 m/min Motor feedbelt: 2,2 kW Pneumatic belt tensioning and oscillation Motorised height adjustment, motor 0,75 kW, readout up to 1/10 mm. Automatic thickness adjustment revision in 2017