wheel rim used for sale

Micro button Manufacturer: Dage Type: Microtronic 22 The universal device for the connection techniques usually used in microelectronics. In many gradations, to changing measuring arms for the pulling test are easily (up to max. 10 kg). Switch can be selected between destructive and non-destructive testing. For the non-destructive test, the maximum assembling force thumb wheel switch can be limiting. The haul-off speed is infinitely adjustable up to 10 mm / s. The readings are analyzed and document formats through the external printer. The measured values are displayed in grams. Technical data Measurement types: Pul-tests/shear test Test modes: destroying / Nichtzerstörend Additional functions: "Overheight-test" (finding great Loophöhen), "keyword test"(Festigkeitprüfung von "Stich-Bonds") Test memory capacity: up to 9999 tests  ...

description: Type: MAN 2848 LE gas engine for combined heat and power Power: 255kWe/1,500 rpm information: The engine delivery range does not include a water pump, an ignition system or a gas mixing system! Standard scope of delivery â?¢ 8 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, standing, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.293 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve s ...

Cutting capacity round 90°: 150 mm Section flat 90°: 145 x 150 mm Cutting capacity round 45°: 100 mm Section flat 45°: 90 x 150 mm Cutting capacity round 60°: 70 mm Working height: 890 mm Band saw blade dimensions: 1735 x 13 x 0.9 mm Cutting speed, continuous: 20-65 m / min Coolant pump: 100 W Engine power: 0,37 kW Voltage: 230 V Machine dimensions (L x D x H): 1000 x 510 x 1520 mm Approximate weight: 100 kg Features: -Adjustable cutting speed for optimal results -Standard with quick clamping vise and fence -Gearbox with hardened and ground Auger and bronze worm wheel -Fitted with base and coolant system -Ball bearing 3-point blade Guide no seeping effect of blade -For mitre cuts the saw handle is swung (up to 60 °), this space-saving work for long workpieces possible -Twist-free, heavily dimensioned saw bracket Scope of delivery: -Band saw blade -Work piece stop -Base -Quick cla ...

FOR SALE ... WESTFALIA GEA BILGE MASTER 3000 USED COMPLETE SYSTEM AT TURKEY. TO WHOM IT MAY CONCERN WE VE WESTFALIA GEA BILGE MASTER 3000 USED COMPLETE SYSTEM AT OUR STOCK . PLS FIND DETAILS ON BELOW TYPE BILGE MASTER 3000 SERIAL NO 9018-317 2007 YOB CERTICATE NO 330/241 WHEEL MARKET NO 0736 Separator TYPE WSD18-01-037 SER NO 9018-317 2007 YOB SYSTEM HAS COMPLETE OIL MONITOR PANEL / BILGE ALARM / CONDENCER ETC ETC BILGE MASTER 3000 READY TO TRANSPORT AT IZMIR TURKEY. IF YOU HAVE ANY QUESTIONS . PLS DO NOT HESITATE TO CONTACT WITH US.. Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Description: heavy double grinding buck (Leipzig Iron and Steel Works) with chip container Technical data Grinding wheel permeser 400 mm Operating voltage 380 volts Drive power 4 KW Weight approx. 340 kg Dimensions (LxWxH) 1100 x 1150 x 1120 mm

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Universal Cylindrical Grinding Machine MSO FFM-U 130/1000 manufacturer: MSO type: FFM-U 130/1000 mach.-Nr.: 16219Mv12438 year of construction: ? comm.-Nr.: 3990505/009 stock-nr.: 1841 + Regular Price: 4.750,- € > Reduced Price: 2.375,- € BN + All prices are shown without taxes (net price) The machine can be used for: outer grinding surface grinding cone grinding Technical Data (According to manufacturer) centre height: 130 mm swing-Ø: 260 mm grinding length: 1000 mm between centres: 1050 mm grinding wheel diameter: 300 mm bore-Ø: 127 mm largest width of grinding wheel for plunge grinding: 40 mm largest total width of a grinding wh ...

FORCIPOL - the quality grinding machine / polishing machine for metalography that is cheap on the market - from the simple grinding machine for manual preparation to the semi-automatic machine - The FORCIPOL series is modular and can be assembled as required FORCIPOL 102: Basic grinding machine / polishing machine with a grinding wheel 250 mm and basic control FORCIPOL 202: as before, but 2 grinding wheels 250 mm For rationalization and reproducible cuts (can be combined with FORCIPOL 102 or 202): FORCIMAT 52: Sample wineer head with simple control FORCIMAT 102: Sample winer head with programmable control For the supply of lubricants and suspensions (only IN the case of FORCIMAT 52 / 102) DOSIMAT 12 - Lubricant Dosing Device DOSIMAT 52 - Lubricant and suspension dispenser (adjust integrated internal control on the device) DOSIMAT 102 - Lubricant and suspension dispenser  ...

Used parts ex ISEKI TG 5390 AHL. 28 kw/40 hp turbo diesel, hydrostat drive 3-stage, 4-wheel drive, front power lifter, cabin, lawn tyres. Info and offers on request. We do not send package deals, lists and do not respond to anonymous messages - please give full name and place of residence as well as tel. no. for inquiries. For viewing appointment sat is required! ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

NEW MACHINE double sided belt linshing or polishing machine, different confugurations possible - linishing / linishing - linishing / polishing - polishing / polishing Motor 4 kW, polishing wheel max. 120 x 500 mm, max. diam. contact wheel 400 mm, linishing belt 50 x 3500 mm; NEW MACHINE

1 rimless hydro extractor made KRANTZ, type GLEITSCHWINGER 1500x700 Inside drum diameter 1.500 mm, inside drum height 700 mm Machine is special reinforced execution with round base support and 4 Gleitschwinger feet

Qty. 1 Second-hand cut-to-length line Mfc.: FIMI, SSW Type: Multiblanks line 1850x2.5 Built: 1995 Stopped: Strip width: 300 – 1850 mm Thickness: 0.3 – 2.5 mm Length: 300-8000 mm Line speed: 85 m/min. Coil weight: 22.5 T Scope of supply: 1. Load coil 25 ton 2. Coils centering 3. 25 ton unwind rod 4. Wire guide photocell 5. Table introduction aprirotolo 6. Group introduction 7. Cutter fly shear 8. 6° FIMI straightener 9. Apply film 10. Circular shear 11. Deceleration/Connection table 12. Wrap waste 13. Ansa passage table 14. Measurement wheel 15. Unique rotary shear 16. First evacuation conveyor 17. Second conveyor for evacuation 18. Scrap unit 19. Autom. wagon for pallet insertion 20. Stacker with palette and air breath 21. Evacuation chain with weight and semi-automatic strapping machine 22. Second evacuation chain 23. Hydraulic units 24. Electrical pan ...

NEW MACHINE - double sided belt linishing and polishing machine, different configurations possible - linishing / linishing - linishing / polishing - polishing / polishing Motor 4, 5.5 or 7.5 kW, polishing wheel max. 120 x 500 mm, max. diam. contact wheel 400 mm, linishing belt 50 x 3500 mm - 3 different speeds can be choosen: 700, 800, 900, 1000, 1120, 1250, 1400, 1600, 1800, 2000, 2240, 2500, or 2800 rpm; NEW MACHINE

Trailer spreader with wheel drive, capacity approx. 600 l., height-adjustable pulling device with ball head coupling, parking brake. Electrical on/off via remote control, electrical spreading adjustment via cable remote control, spreading width approx. 0.8 to 6.00 m, lighting system, agitator sand/salt, GG 950 kg, 25 km/h, Y.O.M. 2005. Little needed, good condition. Same design also with 350 ltr. Usable volume in stock as well as other spreading and snow clearing technology of all kinds. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

Polishing / buffing machine HAU HR 4 for circular parts up to 200 mm max., with 2 working units, units equipped with reconditioned spray systems for liquid polishing compound, wheel diam. max. 400 mm, width polishing wheel max. 120 mm, shaft diam. 35 mm, machine similar to picture ; reconditioned

Double grinding buck Rema with cue equipment, large collecting tray, new condition. Grinding wheel diameter 300mm, 1.8kw Special price

McIntyre 600 CAT Shear Cat shears are powerful enough to deal with a wide range of operations including the cleaning of automotive aluminium scrap, whole gear boxes, cylinder heads and blocks, oversized gate valves and the handling of all non ferrous separations. VERSATILE The 600 CAT features a blade guard system which gives good visibility to the operator and acts as a hold down to prevent material kick back. The machine is foot pedal operated and the jaws return to the open position once the foot pedal is released to increase safety. Wheels are fitted as standard, and forklift points have been included on the body of the machine to ensure that it can be safely lifted both within the yard and during transportation.

Indexing table HAU RK 6-1200, 6 work piece spindles and 4 polishing units type PES, 11 kW each, max. width polishing wheel 300 mm, incl. oscilation, electr. driven hight adjustment, liquide compound feeding system (spray guns + pressure tank, control cabinet Price and additional information on request.; good condition, working order

Universal grinder. Distance between centers: 1600mm. Centre height: 175mm. Maximum grinding diameter: 348mm. Wheel diameter: 500mm. Wheel head: 10hp. Weight: 4700Kgs. DRO Fagor. CE protections.

NTS 200 Wet grinder Grinding wheel diameter 200 mm Grinding wheel width 40 mm Honing diameter 220 mm Honing wheel width 30 mm Speed 120 min¯ ¹ Power drive motor 0,12 kW Power output drive motor 0.06 kW Supply voltage 230 V 50 Hz Motor speed 1400 348 mm, width / depth length 285 mm, height 275 mm Length max 460 mm, width / depth 380 mm, height 435 mm Weight 9.2 kg G & pieces 5750200 Option: Stand with door

McIntyre 600 GT Shear Another Shear in the McIntyre GT Range, the 600 gives a massive cutting area for its relatively diminutive size. Versatile The 600 GT features a blade guard system which gives good visibility to the operator and acts as a hold down to prevent material kick back. The machine is foot pedal operated and the jaws return to the open position once the foot pedal is released to increase safety. Wheels are fitted as standard, and forklift points have been included on the body of the machine to ensure that it can be safely lifted both within the yard and during transportation. Ideal for larger items such as car radiators which can be handled in just one pass, the 600 GT can also be adapted to process catalytic converters.

NTS 255 Wet grinder Grinding wheel diameter 250 mm Grinding wheel width 50 mm Honing diameter 200 mm Honing wheel width 30 mm Speed 90 min¯ ¹ Power drive motor 0.2 kW Power output drive motor 0,12 kW Supply voltage 230 V 50 Hz Motor speed 1400 Length 380 mm, width / depth 370 mm, height 420 mm Length max 440 mm, width / depth 400 mm, height 490 mm Weight 17 kg G & pieces 5750255 Option: Subframe

Wiesheu B4 M Hot air oven with fermentation oven used shop oven Wiesheu for 4 sheets 60x40 cm with exhaust hood. The oven is made with a fermentation cabinet from 2005. The furnace is with fixed water connection for swelling and is movable on wheels. We have a wide selection of shop ovens in the warehouse to visit at any time. You can visit this and theothere ovens. Payment and shipping on request. Wiesheu circulating air oven Type: B4 E2 IS600 for 4 sheets 60x40 sheets with fermentation chamber / built 2005 with IS500 control 2x10 editions for 60x40 sheets Control IS 600 Hood completely stainless steel clad Door stop left Furnace built in 2005 Technical data furnace: 400V - 50Hz - 13A - 8.4 kW Dimensions: Height: approx. 210 cm Width: approx. 90 cm Depth: approx. 95 cm

WEIBERT WJ-D41 Thickness Planers WEIBERT WJ D41 NEUMASCHINE! 400V 4 KW (5.5 HP) n = 4500 RPM Planing width of 406 mm Planer shaft diameter 100 mm Max. 4mm chip removal 4 turn blade shaft Clearance height of 4-225 mm Feed speed of 6 and 12 m / min.mit private motor 1,1 KW (1,5 HP) Suction connection of 120 mm Machine weight 370 kg Machine tables Planer shaft bearing block and table management from GRAUGUÃ? Manual height adjustment with hand wheel 2 role in the thicknessing table G & WJ-D41

Pester Pewo-pack 450SN bundle packer for single and multiple cartons with infeed conveyor (1.5m long), turning wheel and PEWO-therm III 450 E shrink tunnel Infeed width from 82 - 205mm Infeed length from 84.5 - 245 mm Infeed height from 59 - 87 mm Maximum collation width 450 mm Suitable for film types PE, PP & PP stretched, film width from 50 mm up to 450 mm, film thickness from 0.025 to 0.100 mm, roll diameter max. 300 mm, roll core diameter 70/76 mm, connection voltage 3 x 400 V + N + PE / 50-60 Hz, Power consumption 9.0 kW / 14.5 A, operating pressure 5 bar, machine base area approx. 4930 x 1230 mm(LxW), infeed height 900 mm, outfeed height 900-950 mm, machine net weight approx. 1,350 kg, output up to 24 cycles per minute

Buzuluk 84inch Two Roll Mill (Double Roller) Year 1986 Roller diameter 660 mm Length of roller 2100 mm Number of rollers 2 Drilled rolls Speed of the rear roller 36,2 m/min Speed of the front roller 29,6 m/min The ratio of the gear wheels 1 : 1,22 The roller bearings antifriction The consumption of the cooling water 12 m3 per hour Maximum gap between rollers 30 mm The main electric motor 160 kW, 985 operating speed/min, 380V, 50 Hz Gear ratio of gearbox i = 10 Machine dimension L x W x H 5500 x 4000 x 1960 mm Machine weight 35 860 kg

16 x NEW NUMMERATORS STRAIGHT, FORWARD, SMALL No. of the Wheels: 6

Three T-slot plates of a copy-fraes machine from Lid are offered. The T-slot plates can be mounted as a cross table. Scope of delivery only according to photos, without spindles. If you are interested, please request more photos. Further spare parts of lide e.g. towing table of a KF3 pre-wheels. Please ask. Special price Lid cabinet tool cabinet

Number of wheels(pcs)-4 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Video: abcs://youtu.be/NwSQ6DHySrU

Format max 470 x 320 mm format 152 x 127 mm power max 18,000 c/h Stack height 235 mm Stackhoehe Pre-stacking basket 124 mm ; ready for use

Ref.-No. 00579 Z3 Name of the plant Used intensive mixers Manufacturer Eirich Model RV15 Built in 2002 maximum filling 500l / 500kg Industry 2427-01-01-C Proppants made of bauxite "granulating" Circumferential speed 23.4 m/s Machine description Built: 2002 Wirbler drive: - V-belt standard motor - (Pen-Wirbler tool for left/ right-hand running - Armor double; 6 pins, D600) - WIRBLER TOOL IS NO LONGER AVAILABLE - Drive power: 70kW - Speed: 745 rpm - Circumferential speed: 23.4m/s Mixing container drive: - Drive via friction wheel - Drive power: 11kW - Speed: 39 rpm Floor and wall wipers: - Tool holder smoothed - Tool set with HM cutting edge Central lubrication device for ball turning connection and Wirbler storage Wear type pen-wirbler tool: (NOT MORE PRESENT) - Armor 2-fold Mixing: - Wear wall T=8mm - Wear pad T=10mm Floor and wall wiper ...

Type V-380 Number of wheels(pcs)-3 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Video abcs://youtu.be/xZFPl9-vHtg

Manufacturer: Yale Type: MOS10 Type: Carrying capacity: 1000 kg Mast: standard Battery: 24V, 375Ah lifting height: 1600mm number of tyres front: 2 Number of tyres rear: 2 Ideal for the following applications: Scales transports over long distances; Laengerer operating cycles and multi-shift operation; storage equipment in low or medium-high and high shelving systems; Ergonomic features 5-point wheel rest and fixed stabilizing wheels ensure increased stability and greater safety when cornering. Without mounting gear and fork!

This machine is particularly suitable for the processing of electric wastes with PVC and rubber and is almost entirely made of aluminium. Heavy drive wheels enable the modification of large cable diameters. Hole Guide for small diameter by 1-52 mm. Hole Guide for large diameters of 30-100 mm and 30-120 mm. The RMH 100/120 has a two blade system and is forward and down. The knife systems can be used simultaneously. Holes on the base plate to the fasten the machine on a table or work bench. Cutting speed 25 m / min

Ref.-No. 00579 Z1 Description Used intensive mixer Manufacturer Eirich Type R08 Built in 1995 maximum filling 60l / 90kg Industry 7322 Granulating zinc oxide dust Control Not available Machine description - R08 (mixed material temp. max. 80°C) - Star-tangle tool; 4-stage; Li.-Run - Wirbler drive power: 5.5kW - Wirbler drive speed: 1000 rpm - Wirbler rotation direction: Left-hand run - Wirbler speed: 340 rpm - Wirbler circumference speed: 6.2m/s - Wirbler drive type: V-belt - Mixing container drive: friction wheel Type of wear - mixing container with soil wear segments + Wear wall - Star-wire tool with armor - Wall scrapers with armor Accessories - Storage vessel V=115l with Ebro shut-off valve DN200 and Vibration motor - Ebro shut-off valve DN150 on mixing container cover mounted (transition) - Dosing conveyor screw for zinc oxide filter dust, incline  ...

Type V-180 Number of wheels(pcs) 1 Wheels diameter 200 mm Wheels width 40 mm Feeding rate 0,9¬21,2 (A25B40) Motor power 0,75 kW Machine frame - Cast aluminum Transport dimensions 632x332x222 mm Weight 20,1 kg Video: abcs://abc.youtube.com/watch?v=dfsFa6y4sv0&feature=youtu.be

Manufacturer: Yale Type: MS15X Type: High-lift truck Load force: 1500 kg Mast: standard Battery: Hoppecke, 24V, 375Ah lifting height: 2768 mm free stroke: 100 mm Gabellaenge: 1160 mm fork width: 570 mm fork thickness: 65 mm fork rail width: 675 mm Number of tyres front: 2 Number of tyres rear: 2 Ideal for the following applications: Operating cycles and multi-shift operation; storage equipment in low or medium-high and high shelving systems; Cooling House Applications -30 oC. Ergonomics 5-point wheel rest and fixed stabilizing wheels provide increased stability and greater safety when cornering. Without mounting gear and fork

Capacity: 4800 kg Lifting height: 3850 mm Free lift: 1590 mm Battery: 80 V, 805 Ah Operating time: 5 h Lateral valve adjustment weight: 4800 kg Tyres: 4 wheel, solid rubber Length: 3100 mm Width: 1500 mm Height: 2700 mm

5,000 litre storage containers According to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 500 with domed lid, is used, inside empty and professionally cleaned and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted. L = 2.80 m / D = 1.60 m / weight CA. 1.3 tons. / free charged ex works. Description PTO pump: Non calibratable type eco-box-55- Capacity up to approx. 55 l / min. suitable for diesel fuel, incl. -Automated fuel dispenser with PC softwa ...

Double grinding bracket, knife grinding machine Turning one side quickly, the other side running slowly in the water, e.g. for grinding knives Grinding wheel diameter approx. 300mm Weight approx. 250kg Ready to demonstrate under electricity. Special price

Size max 470 x 320 mm Weight 520 kg (approx.) Speed max 18.000 c/h Equipment o - special: post code identification ; working condition

Description: This forward-looking rotor blade ensures a fast and clean implementation of compost and other bulk materials. The material is taken up like a conventional wheel loader shovel. At the dispensing point, the rotor is started by means of the automatic control. The hydraulic rear panel pushes the material evenly to the rotor in dependence on the rotor speed. The opposite rotor mills off the bucket contents, whereby it is well mixed and loosely dropped. Optimal conditions are thus created for the composting process. Clumps and compactions are reliably dissolved and a well-mixed bulk material is produced. Advantages of using the meetra rotor blade: 1. - Maximum area utilization 2. - Excellent material mixing and loosening allow shortest dwell times 3. - Maximum annual throughput, as regardless of plant length and width 4. - Composting allows for trouble-free rotting c ...

Agitator 150 litres with agitator 0.55 KW, 900 rpm and inclined blade stirrer 244 mm Container: Single-walled stainless steel container 150 litres with drain tap. Rollable aluminium frame with aluminium profiles 45 45 mm. 4 steering wheels, 2 of them with brake. Electric motor: Used, powerful electric motor Baumüller, 0.6 kW, 900 rpm, 3 x 230/400 volts. With motor protection plug. Shaft: precision stainless steel shaft D20, length 700 mm, diameter 20 mm, Material stainless steel 1.4301. Coupling: Rigid shaft coupling, material stainless steel 1.4571 Stirrer: Two-winged slanted blade stirrer, diameter 244 mm, material stainless steel 1.4581, wings adjustable at angle.

Manufacturer: Imes-Icore Type description: iCUTwater ECO Year construction: 2017 Working range: 620 x 1000 mm cutting plugs: 1 2D / 2 1/2 D or 3D: 2D Operating hours: 20 Installation mass: Dimensions 2150 x 16 15 x 1964 Power: 7.5 kW Connection power: Bar: 1500 bar fuse in amper: 32 Aoperating hours: 20 pump integrated direct driven built-in pump Tilo Klett with 1500 bar/ 2 l/min and cutting head Allfi Type X, Sand wheel feeder type Jetcut, integrated sand stockpile 25kg. Designed for focusing tube 0.90 mm and Duese 0.30 mm. Incl. control software and post processor on the machines Notebook. ; ready to use

Ultra fine grinding plant, consisting of: Fluid bed opposed jet mill Alpine 630 AFG (V total: 885 dm³, 10 bar shock pressure resistant, fold out classifier wheel), cyclone, 2 pcs. EX shutter valves, control cabinet and 4 pcs. product containers. Prior use: Toner production. Plant can be inspected in already dismantled state. Available for an additional charge: Dust filter Buehler PGFG 60/18 (39 m² filtering surface).

1 RAMISCH laboratory 4-roll calander type RK 46P, face roller width 300 mm, working width 250 mm, calander indicated for following processes: rolling, glaze, friction, mate, Schreiner and embossing,  4 rollers with the following distribution (top to bottom):  steel diameter 120 mm, cotton diameter 240 mm, cotton diameter 240 mm, steel diameter 120 mm, both the steel rollers are electrically heated, linear speed adjustable up to 20 m/min., pressure adjustable up to 195 N/mm = 6 tons, unwinding from roller max. 300 mm diameter, winding to roller max. 300 mm diameter, double fabric spreader, central lubrication system to the 8 roller plain bearings, all rollers are connected through tooth wheels, friction possible and adjustable between 0 and 200%, weight of the machine 2300 Kg, dimensions width 1780 mm, depth 1250 mm, height 1600 mm

24 months warranty TOP value for money Solid, movable baguette long roller, mounted on a mobile frame with caps lock wheels Capacity: 50 g - 1200 g, 1200 pieces per hour Roll width: up to 75 cm on retractable felt rolling belt Mechanical adjustment of Ausroll properties Dimensions in cm: 105 x 69 x 153 (WxDxH) Height of the machine without frame: approx. 70 cm, Engine power: 0.55 kW 380V - 3Ph - 50 Hz - 16A-CEE connector Weight: 258 kg Price incl. mobile base --- Alternative as stainless steel model: SM-380S (machine completely in stainless steel): Price: 5.220,-- incl. mobile frame

New machine 12-month warranty Benefits: + robust, mobile socket roll-out machine + with stainless steel tables + easy to drive, with steering wheels and locking feet for stable grip + Operation with push-buttons + suitable for all types of dough for rolling out and touring + Tables can be folded up on the left and right + Scrapers can be easily removed without tools + Machine is equipped with 1 hand reel as standard + with dough collection plates on both sides + fast spare parts supply within 1-2 business days Technical data: - Bandwidth: 475 mm - Roll width: 500 mm - Table length: 1,660 mm - Roller adjustment: from 0.5 mm to 30 mm (depending on product) - Speed: approx. 50 cm/sec - Engine power: 0.75 kW - Connection values: 400 V - 3Ph - 50Hz - Fuse: 16A-CEE plug - Dimensions: --- working position: 2000 x 940 x 1330 mm (WxDxH) --- resting position: 755 x 940 ...

24 months warranty Solid, movable stainless steel baguette long roller, mounted on a stainless steel frame with caps lock wheels Capacity: 50-1200 grams, 1200 pieces per hour Roll width: up to 75 cm on retractable felt rolling belt Mechanical adjustment of Ausroll properties Dimensions in cm: 97 x 68 x 155 (WxDxH) Height of the machine without frame: 70 cm, Engine power: 0,37 kW 380V - 3Ph - 50 Hz - 16A-CEE connector Weight: 250 kg Price without mobile base (table model): 4.890,-- net

New machine 12-month warranty Benefits: + robust, mobile socket roll-out machine + with stainless steel tables + easy to drive, with steering wheels and locking feet for stable grip + Operation with push-buttons + suitable for all types of dough for rolling out and touring + Tables can be folded up on the left and right + Scrapers can be easily removed without tools + Machine is equipped with 1 hand reel as standard + with dough collection plates on both sides + fast spare parts supply within 1-2 business days Technical data: - Bandwidth: 605 mm - Roll width: 633 mm - Table length: 2,420 mm - Roller adjustment: from 0.5 mm to 30 mm (depending on product) - Speed: approx. 50 cm/sec - Motor power: 1 kW - Connection values: 400 V - 3Ph - 50Hz - Fuse: 16A-CEE plug - Dimensions: --- working position: 2900 x 1072 x 1330 mm (WxDxH) --- rest: 1240 x 1072 x 1900 mm (W ...

Pelessierpresse Hanau, for pressing wagon wheels on axle, gemaess pictures