133,390 used machines on RESALE, but how to find them? Machine Search
axial fan, fan, extraction, fan wheel, fan blade, fan blades, blade fan impeller -Manufacturer: Multi Wing, wing fan impeller 4-blade fixed pitch -Diameter: 400 mm -Hole: Ø 19 x 40 mm -Quantity: 1x fan wheel available -Dimensions: Ø 400 x 75 mm -Weight: 0.7 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Ø 55 mm, thread M60 see photos -Whetstone: Dorfnerwerk type 5A 100-JOT8-UEH 400 x 40 mm -Transport dimensions: Ø 440 x 85 mm -Weight: 32.6 kg
Castor, swivel castor, transport equipment castor, fixed castor, heavy-duty castor, built-in wheel, solid rubber wheel -Built-in wheel: solid rubber wheel, steel rim with roller bearing, 2 pieces -Load capacity: 250 kg -Wheel: Type 250/60-130 Ø 250 mm -Hub: Ø 25 x 75 mm -Shipping/Price: complete -Dimensions each: Ø 250 x 75 mm -Weight: 3.6 kg/piece
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Ø 55 mm, thread M60 see photos -Whetstone: Dorfnerwerk type 5A 100-JOT8-UEH 400 x 30 mm -Transport dimensions: Ø 400 x 80 mm -Weight: 28.7 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø47-55 mm, thread M60 see photos -Grindstone: Dorfnerwerk Type 5A 120-JOT8-UEH 400 x 20 mm -Transport dimensions: Ø 430 x 80 mm -Weight: 26.4 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø47-55 mm, thread M60 see photos -Grindstone: 400 x 40 mm, unfortunately without type designation -Transport dimensions: Ø 400 x 85 mm -Weight: 31.1 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Ø 55 mm, see photos -Grindstone: 420 x 60 mm, unfortunately without type designation -Transport dimensions: Ø 420 x 87 mm -Total weight: 37 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø 62-69 mm / Left thread. -Grinding wheel: Ø 450 x 40 mm -Transport dimensions: Ø 450 x 140 mm -Total weight: 30 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone, 2 pieces -Mounting: Hole shaft cone Ø 50-60 mm -Grinding wheel: Ø 225 x 40 mm -Shipping/Price: complete -Dimensions each: Ø 225 x 90 mm -Weight: 10.4 kg/piece
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø 32-35 mm -Grinding wheel: Ø 210 x 40 mm -Transport dimensions: Ø 210 x 70 mm -Total weight: 4.3 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone, 2 pieces -Mounting: Hole shaft cone Ø 44-55 mm -Grinding wheel: Ø 270 mm, see photos -Shipping/Price: complete -Dimensions each: Ø 270 x 80 mm -Weight: 9.7 kg/piece
Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, wheel block for crane trolley -Type: unfortunately no exact type designation -Wheel: Rail width intermediate dimension 52 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 1 piece available -Dimensions: 220/123/H160 mm -Weight: 9 kg
Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, wheel block for crane trolley -Type: unfortunately no exact type designation -Wheel: Rail width intermediate dimension 60 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 2x wheel block available -Price: per piece -Dimensions: 220/97/H160 mm -Weight: 8.7 kg/piece
Friction wheel, running wheel for bridge crane, bridge crane, overhead crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, Wheel block for crane chassis -Type: unfortunately no exact type designation -Wheel: Rail width intermediate dimension 48 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 2 pieces available -Price: per piece -Dimensions: 220/97/H160 mm -Weight: 8.5 kg/pc.
Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, wheel block for crane trolley -Type: unfortunately no exact type designation -Wheel: Ø 122 mm / rail width intermediate dimension 63 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 1x wheel block available -Dimensions: 220/97/H160 mm -Weight: 8.5 kg
Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.1 kW -Speed: 1410 rpm -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Weight: 200 kg
Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.1 kW -Speed: 1410 rpm -Peripheral speed: 45 m/s -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Weight: 290 kg
Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Engine power: 1.5 kW -Speed: 1430 rpm -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Dimensions: 700/550/H1200 mm -Weight: 170 kg
Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.37 kW -Speed: 2900 rpm -Grinding discs: max. Ø 175 mm -Operating voltage: 380 volts -Dimensions: 420/390/H1150 mm -Weight: 65 kg
Grinding wheel, cup wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 55 mm -Outer diameter: Ø 110 mm -Width: 22 mm Price: per piece -Number: 12 available -Weight: 0.7 kg
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 51 mm -Outer: Ø 200 mm -Width: 40 mm -Number: 7x discs available -Price: per piece -Weight: 1.9 kg
Brake shoe set, wheel brake, brake kit -Manufacturer: Knott, wheel brake type 20-2426/1 -Maximum permissible weight: 750 kg -Bolt circle: Ø 110 mm / M12 -Price: per piece -Quantity: 29 pieces -Dimensions: Ø 225 x 200 mm -Weight: 11.5 kg/piece
Sandpaper, abrasive paper, sanding cloth, sanding discs, abrasive bodies -Manufacturer: Carborundum-Dilumite, grinding wheel -Type: BA5A60-JOT15-V20P5T3 -Outer diameter: 400 mm -Width: 50 mm -Inner diameter: 127 mm -Quantity: 1 piece available -Weight: 9.1 kg
Sandpaper, abrasive paper, sanding cloth, sanding discs, abrasive bodies -Manufacturer: Carborundum-Dilumite, grinding wheel -Outer diameter: 350 mm -Width: 40 mm -Inner diameter: 127 mm -Quantity: 1 piece available -Weight: 5.8 kg
Offered is a surface grinding machine (cup wheel grinder): Table surface X/Y: approx. 175mm/450mm, max. grinding length: approx. 200-250mm, max. grinding width: approx. 175mm, speed: approx. 2800rpm, weight: approx. 450kg, inspection possible by appointment.
A CNC precision grinding machine Peter Wolters with two opposing grinding wheels and a workpiece/carrier disc system for simultaneous machining of both workpiece sides is available. Carrier wheel outer diameter: 1050mm, carrier wheel ring diameter: 290mm, max. workpiece height: 100mm, machine dimensions X/Y/Z: approx. 2350mm/3400mm/2400mm, weight: approx. 7000kg, control: Siemens Simatic S7-400 with WinCC visualization, operating hours: approx. 7000h. Including twin loader, buffer table, CBN fine grinding wheels, dressing wheels, ultra-fine measuring system, temperature monitoring, remote maintenance system, wear compensation and alignment system. Without filter system and cooling system. Documentation available. An on-site inspection is possible.
Disc Wheel Shredder for Grass Wood ec. YOC 1995 130 Kw motor incl. Feed belt Discharge screw Pedestal Knife sharpener
The SHANTUI LE60 is a used, fully electric wheel loader suitable for heavy construction tasks, with a robust operational weight of 20 tons. It is powered by a 357 kWh lithium-ion battery, featuring liquid cooling and rated at 537.6 V / 664 Ah. This allows for up to 6–10 hours of usage, with a charge time from 20% to 95% taking approximately 1.25 hours when using a 240 kW charger. Equipped with a 100 kW driving motor capable of a maximum of 200 kW and an 80 kW working motor that peaks at 160 kW, this loader offers impressive torque for demanding tasks. The transmission is an electronically controlled gear system, supported by self-locking differential axles. With a maximum speed of 38 km/h, it efficiently handles operational demands, boasting a lift capacity of 6,000 kg. The hydraulics system delivers a flow rate of 112 l/min, ensuring fast and reliable performance with full cycle times ...
Two identical Volvo L180D wheel loaders available, operating hours: approx. 30,000h, weight: 32.7t, engine type: Volvo TD 122 KHE, rated speed: 2100rpm, power SAE J1995 (gross): 209kW (284HP), power ISO 9249/SAE J1349 (net): 206kW (280HP), max. torque: at 900rpm, torque SAE J1995 (gross): 1580Nm, torque ISO 9249/SAE J1349 (net): 1580Nm, displacement: 12l, onboard voltage: 24V, batteries: 2x 12V, battery capacity: 2x 140Ah, cold cranking current per battery: 1050A, reserve capacity per battery: 290min, alternator: 1680W/60A, starter power: 6.6kW (9HP), operating weight: 26-29t. Equipment: engine: high-performance low-emission diesel engine, 6-cylinder inline design, direct injection, turbocharger, charge air cooling, 4-stroke, replaceable cylinder liners, air filtration system: three-stage, cooling system: hydrostatically driven fan with separate cooling circuit for the charge air cooler, ...
Excavators, track widening for excavators, wheel spacers -Manufacturer: Eurorubber, track widening for excavators -Part No.: ZR804550 -Material: Rubber -Dimensions: see photos / technical drawing -Suitable for various excavator models -Dimensions: Ø 820 x 65 mm -Weight: 31 kg
ID3219 Caterpillar 928G year/Year of construction 2004 approx. 9250 hours/hours 14 t Bucket with cutting edge, fork, hydraulic quick hitch, tyres 100/40 % good Shovel with cutting edge, fork, hydr. Quick coupler, tyres 100/40% good
ID3806 Hanomag 66D year/Baujahr 1991 approx. 16,000 hours/hours 20 t Bucket with teeth Shovel with teeth
Label roll: 250 mm Height of dispensing edge from floor: adjustable from 50 to 100 cm. Mobile on wheels
Grinding wheels, grinding elements, cup wheel, double bench grinder, surface grinding wheel, bench grinder wheel -Manufacturer: Tyrolit, ceramic grinding wheel 200x50x28 mm, unused -Type: 89A 46 J 8 V53 -Number: 4x discs available -Price: per piece -Dimensions: Ø 200 x 28 mm -Weight: 2.5 kg/pc.
General Description Mixed lot comprising four sets of automotive and commercial vehicle tyres and wheels . The lot includes commercial van tyres with and without steel wheels, passenger-car tyres with alloy wheels and a separate set of Falken passenger-car tyres. Set 1 – Fulda 215/75 R16C with Steel Wheels Quantity: 4 tyres with steel wheels Manufacturer: Fulda Model: Conveo Trac 2 M+S Tyre size: 215/75 R16C Steel wheels included Previously fitted to a Citroën Jumper Wheels reported straight and undamaged Set 2 – Continental 215/75 R16C Quantity: 4 tyres Manufacturer: Continental Tyre size: 215/75 R16C Suitable for commercial vans Tyres only – wheels not included Set 3 – 205/55 R16V with Alloy Wheels Quantity: 4 tyres with alloy wheels Tyre size: 205/55 R16V Alloy wheels included Previously fitted to a BMW 1 Series Wheels reported straight and undamag ...
A Wacker Neuson wheel loader, ideally suited for agricultural purposes, is available. Engine: Deutz TD 2.9 L4 S5, Power: 61hp/45kW, Displacement: 2900cm³, Emission standard: Stage V, Exhaust aftertreatment: DOC/DPF, Max. engine speed: 2300rpm, Max. tipping load: 3300kg, Standard bucket capacity: 0.8m³, Max. working hydraulic pressure: 220bar, Max. travel hydraulic pressure: 450bar, Fuel tank: 82l, Kinematics: Z, Articulation angle: 44°, Oscillation angle: +/-12°, Max. dump height: 2430mm, Lifting force: 41.36kN, Outside turning radius: 3870mm, Tires: 405/70 R20. Transport dimensions X/Y/Z: approx. 4800mm/1850mm/2550mm, Operating weight: approx. 4600kg, Operating hours: approx. 1382h. Including 1200mm pallet forks, FEM II rotating fork positioner, road approval and hydraulic Z-HV quick coupler. The engine or the control system of the windshield washer system has a defect. Documentatio ...
Power: 270 hp (198 kW); AGCO Power diesel; 6 cyl.; 8,400 cm³; turbo intercooler; Euro 6; DPF Operating parameters: Operating hours 9,471 h (verifiable); travel speed 40 km/h; PTO 540/1,000 rpm; fuel cons. approx. 30 l/h; fuel tank 600 L; CVT gearbox; AWD 4x4; 2 axles; counterweight 1,500 kg; dim. 4,868 x 2,550 x 3,382 mm; wt. 12,000 kg Workpiece capacity: Heavy-duty agricultural tractor; suitable for high-power PTO & draft applications Supported edges: Agricultural implements (tillage, seeding, transport, PTO-driven machinery) Edge types: Traction work; PTO drive; field & transport operations Included equipment: On-board computer; cruise + adaptive cruise; drive mode selection; electronic instrument panel; tachometer; electric/heated mirrors; fuel saving system; pneumatic seats; heated cabin; climate control; hydraulic power steering; steering wheel adj. (height/depth ...
\" General Description 4WD agricultural tractor manufactured by Case IH , model Puma 195 . Heavy-duty tractor designed for field cultivation, implement operation, transport and general agricultural applications. Equipped with front hydraulics, suspended front axle and an enclosed air-conditioned cab. Technical Details Manufacturer: Case IH Model: Puma 195 Machine type: Agricultural tractor Year: 2008 Operating hours: 9,820 h Drive: 4WD / MFWD Transmission: 18 forward / 6 reverse powershift TLS suspended front axle Front 3-point hydraulic linkage Rear 3-point linkage Multiple rear hydraulic connections / remotes Air-conditioned enclosed cab Electronic / hydraulic controls Multifunction control console / joystick Large agricultural tyres on steel rims Condition Used agricultural condition. The tractor appears substantially complete with front linkage, rear linkage, h ...
GARTEX WHEELBARROW PLASTIC KW100KID 100 litres Auction-ID: A1-40897-390
Grinding wheel dimensions: 200x20x25 mm (thickness 2.0 mm) Maximum grinding wheel speed: 30 m/s Motor rpm: 1400:2800 Power: 1.1 kW Weight: 110 kg Overall dimensions: 1200x700x700 mm COMPLETE WITH: -Extractor Auction-ID: A1-48745-30
grinding length: 600 mm grinding width: 400 mm workpiece height: 375 mm workpiece weight: 400 kg table longitudinal travel: 650 mm table speeds: 2 - 28 m/min table cross travel: 400 mm speed: 100 - 1000 mm/min grinding wheel size: 300 x 50 x 76,2 mm grinding spindle drive: 3,7 kW peripheral speed: 10 - 32 m/sec total power requirement: 11 kW weight of the machine ca.: 2,1 t dimensions of the machine ca.: 2,95 x 2,65 x 2,47 m CNC Precision Surface Grinding Machine Table drive: hydraulic Cross-axis drive: electromechanical Electromagnetic plate: 600 x 400 mm with holding force control and automatic magnetic pole reversal for demagnetizing Features: Partially enclosed, open-topped loading compartment with a sliding door Cleaning kit for cleaning the work area with hand-held impulse nozzle Holder for prism arm with single-point diamond, MK 0 Grinding spindle speed control with V-constant con ...
max. wheel diameter: 275 mm max. module: 6 min. module: 1,5 Control: SINUMERIK 840 C tooth width: 5,5 mm spiral angle: min. 0 / max. 60 ° max. number of teeth: 120 min. number of teeth: 5 ratio of transmission: 1:10 min. ratio of transmission: 1:1 work piece spindle speed: max. 110 U/min blade head turning speeds: 20 - 110 U/min total power requirement: 100 kW weight of the machine ca.: 16,7 t dimensions of the machine ca.: 5,20 x 2,30 x 2,40 m Internal deburring device U axis / Q spindle chip conveyor coolant device Electrostatic air purifier ELBARON no tools No workpiece clamping device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Set of 2 wheels from a Leboulch spreader including tires and rims Auction-ID: A3-46157-36356
maximum number of results exceeded
please refine your search
100 € 
