wheel plant used for sale

AGICOM recycling machine trade: Used eddy current separator Eddy Current from Goudsmit

Technical data: Dimensions and weight Width of the machine: 2230 mm Length of the machine: 2400 mm Weight of the machine: 1550 kg approx. Performance 0 – approx. 55 m / min, endurance run. Cycle operation power / hour depending on the operator. Up to 2,000 pcs/hour depending on packaging Drive Belt press belt 1 x 0.75 kW Noise 70 dB (or less) Connection 3 x 400 V, 25A, 50 Hz, powered by the LUNEX basic machine. Compressed air None Formats Min. width approx. 60 mm depending on the packaging Min. length approx. 150 mm depending on the packaging Max. width 1600 mm (= passage width) Max. length in principle not limited Material All formats depend on the nature of the packaging. Dimensions are valid for folded blanks. Motor Glulam Bridge Lenze Type: MDXMA2M080-32 (IP 55) 50/60 Hz 0.75/0.92 kW 400/230 V 1.90/3.30 Amp.

Format lamination line / lamination line / laminating machine Make Fetzel Type SOVA1 Total power 8 KW Compressed air 6 bar / 250 l/min. Lamination width up to 400 mm Total length 4000 mm, total width 1100 mm, total height 1800 mm With 3 winding/unwinding rollers at the start, heated laminating roller at the top and bottom, laminate winding and protective paper unwinding at the end. Various measuring rollers and deflection rollers. With documentation.

Pipe cutting system with optical laser marking detection The FZH Vario Flex is a fully automated pipe cutting system. It is specially designed for the precise, process-reliable cutting of stainless steel pipes (e.g. for fuel, brake, air conditioning or hydraulic lines). The system has optical laser marking detection. The control panel can be used to choose whether the cut is triggered mechanically (e.g. on the back of a union nut) or fully automatically via the optical detection of a laser mark applied to the tube. Thanks to the integrated rotating 3-jaw cutting head and a micro spray unit (minimum quantity lubrication), machining is extremely gentle on the tool. The pipes remain almost completely dry and free of coarse dirt. The entire process from insertion to clamping, separating and depositing is highly automated in a material-friendly cycle process. Fully integrated ...

Consisting of: 1x Actini Decontaminarion unit, skid mounted with built-on switch cabinet equipped with Siemens Simatic HMI Touchscreen control, 1x Actini stainless steel vertical storage tank, y.o.m. 2024, capacity 6200L, 1x Actini pump unit with built-on switch cabinet with 2 PH meters, 1x plastic Caustic bin, 1x plastic Acid bin, 3x plastic Soude/Acid bins in various sizes, With connecting pipework Auction-ID: A1-48959-567

Tandem hot melt system with two dosing pumps for PUR hot melt adhesives. Well-maintained condition, from production. 400 V, 50 Hz; dosing pumps and control available. Auction-ID: A7-49816-103

Thermal process plant with nitrogen and formic acid supply, incl. Leybold vacuum pump and control system. Year of manufacture 2011. Well-maintained external condition, but without documentation and without available password – therefore only tested to a limited extent. Power 10 kW; Load current 25 A; Feed-in 3/N~ 400/230 V 50 Hz; Breaking capacity 0.3 kA; Operating hours approx. 21,286 h Auction-ID: A7-49816-99

Manufacturer: Normet Model: Norrunner Type of machine: Concrete spraying machine Year of manufacture: 2017 Power: 425 kW Total weight: 31720 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

TBA 19 20 V 125 Slim complete line in excellent condition. PLC upgraded to RX3i TSA 21 2003 Multi Shrink Carton Sealer Manual Conveyor Hours: 68632

TBA 19 200 slim line with HI kit was producing 180 ML Hours 65238 PLC upgraded to RX3i TSA 21 2004 Multishrink Conveyors

used aseptic filling line SIG-COMBIBLOC, Type CFA 310-32, built in 2004. Capacity: 10,000 E/h Packaging type: C3, (1ltr. slim) Included: - Automatic unpacker and feeding of blanks - Closure applicator - Tray packer - Vertical buffer - Various conveyors - Control cabinets, etc. Dismantling by the buyer Location: EU country

Water Distillation Plant for WFI Water Manufacturer : Kemiterm Type: 1000MS-6 Technical specifications : low pressure 5/3 bar high pressure 8/5 bar Temperature 100 °C / 85 °C GMP Distillation capacity up to 2200 l/h Documents: available

Technical data Manufacturer: RW Rolf Wolfgang GmbH, Ditzingen Model: Epoxy Inject (Injection Device Recirculation) Type: 100/120/25/6 No: 30.01.88 Year of Make: 2002 Drive: Compressed air Permissible Air inlet pressure: 8 bar Max. operating overpressure: 8 bar Working pressure: 1 to 8 bar Dimensions: 1200 × 800 × 1950 mm Weight: 1600 N Flow volume A-pump: 29 ccm/DH Flow volume B-pump: variable with rocker arm adjustment and internal mixing Container: Stainless steel 1.4301, permissible Pressure 6 bar, test pressure 8.6 bar Permissible Container temperature: -20 °C to 80 °C Configuration Design: Air-operated dosing and mixing system with two pump circuits and stainless steel tank. Auction-ID: A1-50026-54

Revamping year 2023, with STAMFORD 600 Kw generator year 2022, oil filtration unit, and various equipment supplied with the system. Cummins C825 D5 is natively an 825 kVA industrial diesel generator set, but it is often integrated and configured within cogeneration plants Continuous Duty Power (Prime Power - PRP): 750 kVA / 600 kW Emergency Power (Standby Power - ESP): 825 kVA / 660 kW Engine: Cummins QSK23-G3 (6 cylinders in-line, 23 liters displacement, turbocharged. Alternator: Typically paired with a Stamford model (e.g. S6L1-C41). Voltage / Frequency: 380-440 V / 50 Hz.Rotational speed: 1500 rpm Auction-ID: A1-49971-1

UK Power Generators Ltd have in stock the container for the generators to be inserted and perform their energy production operations. Manufacturer: Jenbacher Ideal for Jenbacher 320,316, 314 …. 312 series generators Available for sale… The empty container with highly specialised flooring and walls considering the equipment to be installed in there. The container pictures are attached to this advert, as seen. Everything inside the empty container. Please see attached the pictures for the units available for sale. Kindly advise your interest if you would like to get further details feel free to contact us back. For arranging the visit inspection; and pricing information feel free to contact us today to get a quote.

AGICOM recycling machine trade: Used eddy current separator Eddy Current from Goudsmit. The Eddy Current non-ferrous separator is intended for the separation and recovery of non-ferromagnetic metals (e.g. aluminium and copper) from non-adherent material streams. The separation process of the Eddy Current non-ferrous separator is based on the so-called "eddy current principle". When electrically conductive materials are exposed to a rapidly changing magnetic field, current is induced. Such eddy currents create a magnetic field that is opposed to the changing magnetic field of the magnetic roller (the output magnet). Electrically conductive particles passed over such a magnetic roller are therefore repelled by the changing magnetic field. The non-electrically conductive materials fall off after passing through the magnetic roller. The separated non-ferrous parts and the cleaned mat ...

Nestro colour mist column - built in 2003 -Ideal for small and medium-sized businesses 4 swivel castors provide great mobility and easy handling 3 filter mats (will be replaced) ensure optimal filtration and a dust ejection of less than 3 mg/m³, according to TA Luft The built-in double-sided centrifugal fan is low noise, the high-performance impeller with a Efficiency of 82% is enormously economical (LxWxH)- 600x800x1200 mm Filter area - 1.5 m²

With cow recognition ___ milk measurement ___ automatic afname___ 2 krachtvoerboxsen___ IQ MILKING DIG ____ 75 collars with bronze detection ___ herringbone between hind legs milking at 65 degrees Auction-ID: A3-46162-2709

GOIMENDI hydraulic power unit functional. Power: 11 kW Maximum pressure: 280 bar Displacement: 28 cm³ Weight: 400 kg Auction-ID: A1-49938-43

Ex-proofed solvent preparation station made of stainless steel. The station consists of: -> 3 pcs. compressed air driven diaphragm pumps -> stainless steel solvent tank -> drip pan made by Denios -> ex-proofed agitator and stainless steel reactor -> stainless steel piping

The 6-station cleaning machine was part of a lens processing process. As an intermediate process, it took over the necessary cleaning of the transport containers, The cleaning process was carried out fully automatically from the loading station to the removal station. This function (station 1 and 6) can no longer be operated, because the systems conveyor belt is no longer available. - Station 2: post-cleaning with ultrasound in heated cleaning liquid. - Station 3: Rinsing with heated rinsing liquid, blowing off the residual liquid. - Station 4: pre-drying with heated air. - Station 5: Post-drying with heated air. - Control: Siemens SPS S7-200

Multihead weigher with automatic packaging machine. The plant is in mint condition. Viewing: by arrangement Material: Stainless Steel Bag length: 450 - 800 mm Bag width: 150 - 300 mm Weight of packing machine: 800 kg Packing speed: 30 - 70 bags/min Control: Siemens Smart Line Electr. Total power: 2.2 kW Total weight: 1,300 kg Disassembly: by buyer or on request

15019533 - without coupling material - from foundation, no forklift, forwarding agent as loading aid can be requested for an extra charge. Auction-ID: A7-50458-177

Size from 20 to 115 cm, including 2 stone columns h. 100 cm Auction-ID: A1-50252-87

Defective, half-shell, 15005160 - without coupling material - Auction-ID: A7-50458-124

without furniture, 16000673 - without contents/furniture -16028472 from foundation, no forklift, forwarding agent as loading aid can be requested for an extra charge. Auction-ID: A7-50458-61

Defective, 22053891 from foundation, no forklift, forwarding agent as loading aid can be requested for an extra charge. Auction-ID: A7-50458-117

15019532 - without contents/coupling material - from foundation, no forklift, forwarding agent as loading aid can be requested for an extra charge. Auction-ID: A7-50458-176

Half shell, 15013548 - without coupling material and WITHOUT small kitchen- Auction-ID: A7-50458-51

Milk pasteurisation line of 8.000 ltr/h, used in a quark production factory. Line existing out of open level tank with lid (100 liter), product pump (Fristam), plate heat exchanger (Tetra Pak / Alfa Laval C6-SR, year: 2018, serial nr: 30108-17714, volume: 114 liter, pressure: 0 / 10.0 bar, temperature: 0 / 140 °C, 4 sections, number of plates: 156 in total devided in 48-16-48-48), holding tube in tank, booster pump (Fristam) system to get more pressure on the raw milk side compare to the pasteurised milk side and product and steam valves. Line CIP cleanable. Indirect hotwater set by heating of steam, closed loop with circulation pump (Fristam). Components available, no piping or controls for the pasteurisation plant itself., Addtional features:, - Was running together with the Rannie 50.79, #1598, .hamburg-machinery/listings/9063938-used-high-pressure-homogeniser-ran nie-blue-top-50-79. ...

CONTROLS   CNC controls SIEMENS 840 D SL HEAT TREATMENT COMPARTMENT / ZONE   length: 1000 mm   diameter: 36 mm HEAT TREATMENT COMPARTMENT / ZONE   heat treatment process: tempering   length: 1000 mm   diameter: 36 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 6700 mm   space requirements -front/back-: 7500 mm   total height: 3750 mm   total weight approx.: 20000 kg ELECTRICAL SPECIFICATIONS   total power consumption: 860 kW Accessories: e. g. base plate, exhaust system, tools, ... Operating hours: 7760 type stations / number: hardening 1x - Tempering 1x The machine is sold without workpiece programs.

Consisting of: a.o. 1 API SCHMIDT-BRETTEN - Sigma 16 TCN - Plate Heat Exchanger, 2 KPA - KN 253/ 4A - Pump, 1 ECKARDT - SRI 986 - Steam Control Valve, 1 safety changeover valve, 1 flow tank, 1 control cabinet, dimensions (LxWxH) approx. 510x800x200 mm Incl. stainless steel frame, The tanks in the background are expressly NOT part of the system The last 6 pictures show the separation points. Due to the increased dismantling effort, collection is by prior arrangement. Auction-ID: A1-50564-1

consisting of: a.o. Tubular heat exchanger, 10 mm diameter, single tube, 1 APV LAB 60/100 - high-pressure homogenizer, 350 bar, 100 ltr./h, rollable, dimensions (LxWxH) approx. 700x650x1020 mm, 1 GEA - VT 04 CDSC 16 - Plate Heat Exchanger, 1 Progressing cavity pump Allweiler type ASP 1 Grundfos High Pressure Centrifugal Pump, CRN, 1 DP - High Pressure Centrifugal Pump, 2 process vessels, 1 flow tank, 4 control valves 1 control cabinet with 3 frequency controllers Due to the increased dismantling effort, collection is by prior arrangement. Auction-ID: A1-50564-39

Key data: 27 mm, 36 , 1200 U/min

Warehouse – No. 2875 1 used, in 2026 Partially overhauled and function-tested compounding granulation line, consisting of: Brabender grav. Dosage 2-components (expandable, optional vs. surcharge) with 1x FlexWall 40, 1x DDW-MD5, Congrav RC4 control stand-alone Extruder Twin Screw Leistritz Type ZSE 27 HP Synchronous, seal-combing, segmental screw and barrel with intensive cooling. Screws 2x Ø 27 mm- 36 L/D with 8 cylinder zones with 3x degassing zones, 1x vacuum pump 1.5 kW Screw speed up to 1,200 rpm.-1 – adjustable Extruder drive 33.8 kW - Heating capacity 9.8 kW installed Mass pressure sensor Control Macromatex III MAAG Gala Underwater Pelletizer Type LPU Model SLC 5, incl. Polymer start-up valve with hydraulics Perforated plate 20°, granulator SLC 5 with drive 1.5 kW Water Box - Temperate water system with Granule Centrifugal Dryer Type 1150, Driv ...

Manufacturer PWH Flow capacity 400 m3 hour of bulk material Grit 0 to 30 mm Bulk weight 0.84 to 0.90 to / m3 Water content 18% Heap height 12 meters Operating voltage 380 V Control voltage 220 V Bucket capacity: 100 litres • Number of shovels: 8 pieces • Bulk per minute: 60 • Theoretical power: 360 m3/h • Effective power: 280 m3/h • Bucket wheel diameter: 3.45 m • Circumferential force (wheel): 15,000 N • Cutting speed on the knife: 1.35 m/sec • Removal height (heap height): 12 m • Discharge of the lowered wheel: 11 m • Lifting height on the paddle wheel: 6 m • Lifting speed on the paddle wheel: approx. 3 m/min • Senovice speed on the paddle wheel: approx. 3m/min • Swivel speed: approx. 12 m/min • Angle of rotation of the trolley (suspension): 360 • Angle of rotation of the trolley

a palette with 145 kg - 4 pieces new Schleifscheiben D=350mm, 2 pieces used Schleifscheiben with flange, 10x Abrichtrollen. a palette with 319 kg - 4 pieces Schleifscheiben D=400mm uses with flange and an Abrichtrolle.eine palette with 257 kg - 22 pieces Abrichtrollen with flange

Cauldron standing on 4 wheels Manufacturer: Appointed Serial No.: -. Year of construction: 1971 Volume: 150 LTR. Material: 1.4541 In the pressroom: Operating pressure: 5 bar Capacity: 20 LTR. Operating temperature: 158 ° C In the loading space: Content: 150 LTR. Operating temperature: 100 ° C Dimensions: Bowl ø: approx. 540 mm Interior height front: approx. 640 mm Interior height rear: 580 mm L x W x H: 700 x 700 x 1,100 mm (with wheels) Containers with heating jacket with sloping to the spout, tank outer shape rectangular, marbled at top: 1 hinged lid approx. 600 mm diameter with hinge and handle on the front: 1 temperature display 1 valve 1 " 1 spout DN 32 with shut-off valve at the back: Heating valve

4 PCs. measurement and control cabinets with a swivelling frame and others with drawers and shrouds. Inside some with ventilation and with mounting plate. In frame door socket. Side panel with main switch. As Rittal IT units however incl. fittings. Size H/B/T 2000/800/550 The price is per measurement unit.

Robust rotary valve with inlet and outlet diameter 275 mm, drive via gear motor 0.25 kW / 35 UPM. Several identical locks available (Built between 2000 and 2007), very good condition, partly unused.

Gear wheel, crankshaft Part no. 110014 NEW

Gear Deutz 816 NEW Part number: 0405 4284 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Wheel diameter 120 mm Wheel width 60 mm Wheel diametre hole 35 mm

Type 6202RS Thread diameter 8 mm Wheel diameter 43 mm Wheel width 15 mm Total length 40 mm

WHEEL.GEAR.GAER,IDLRJ.W.PUMP

Div. Interchangeable wheels for the gearbox, C-axis table; B-axis milling spindle Drezahl

Various interchangeable wheels for the gearbox Speed...

With a robust operating weight of 8,500 kg, the RB 85 offers greater lifting capacity and stability while maintaining the speed and efficiency of a road-ready machine. Operating Weight: 8,500 kg Engine: Yuchai YC4DK85-T300, EURO V Power Output: 62.5 kW / 85 HP at 2200 rpm Max Torque: 340 Nm at 1400–1700 rpm Displacement: 3.6 L Hydraulic System: Lonking main valve + swing motor Hydraulic Flow: Up to 30 L/min Controls: Hydraulic-electric joysticks Tires: 8.25-16 heavy-duty pneumatic tires Drive: 4-wheel drive (with optional differential lock) Max. Travel Speed: 28 km/h Max. Digging Depth: 3556 mm (depending on boom config) Cabin: Fully enclosed with ergonomic seat, climate control, and wide visibility Swing Speed: 9 rpm Attachment Interface: Quick coupler standard; supports hydraulic hammers, augers, grapples, and more

The RB135 and RB 150 are wheeled excavators engineered for high-efficiency digging and utility work in urban and semi-urban environments. Operating Weight: 15,000 kg or 13,500 kg Engine Options: Kubota V5009-T or Yuchai YC4D115 (EURO V) Power Output: Up to 157 HP (Kubota) or Up to 115 HP (Yuchai) Max Torque: Approx. 600 Nm at 1500 rpm (Kubota) or Approx. 380 Nm at 1700–2000 rpm (Yuchai) Displacement: 5.0 L (Kubota) / 4.2 L (Yuchai) Hydraulic Pump: Kawasaki PNM variable axial piston pump Hydraulic Valve: Parker high-performance control valve Swing Engine: Sunjin (South Korea) Tires: 9.00-20 industrial-grade tires Controls: Hydraulic-electric joysticks Cabin: Enclosed with heating, ventilation, and ergonomic seating Hydraulic Flow: High-capacity system for powerful attachments Max Travel Speed: Up to 30 km/h Max Digging Depth: Approx. 4,750 mm (d ...

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Fuchs: EKW 46 K/5 KE -Outer diameter: 300 mm -Width: 13 mm -Inside diameter: 100 mm -Price: per piece -Number: 4 pieces -Weight: 1.9 kg

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Fuchs: EKW 46 K/5 KE -Outer diameter: 300 mm -Width: 10 mm -Inside diameter: 100 mm -Price: per piece -Number: 2 pieces -Weight: 1.4 kg