wheel plant used for sale

The complete conveyor technology is from CSF. The control system of all system components including a visualization, all control cabinets, all FUs and many other components have been completely renewed in the last 5-7 years. The plant was decommissioned in Q1-2025, but can be restarted at any time if necessary. All system components are on standby and can be immediately put into operation and presented to a potential interested party. The system has one hand and two automatic cabs. The complete part size 7000x2300x800 mm can be moved and coated across all cabins. The system is designed in such a way that all 3 cabins can coat at the same time. Hanger throughput approx. 14 hangers per hour Water dryers as well as powder dryers are each heated indirectly via an oil-air heat exchanger. The system has no maintenance backlog and has been regularly maintained by our own maintenance ...

Compounding system with underwater granulation. Material: PE, PP, PS, ABS (+ fillers) // Details: DC motor, DC rotor, segmented screws (2x x 70 mm / 40D) and cylinders, degassing, vacuum pump, stuffing unit, backwash screen changer GNEUSS RSF 150, underwater granulation GALA with cutting rotor, water circulation system, heat exchanger, centrifugal dryer. Controls: SIEMENS S7 with screen visualization. Available at an additional cost: Sidefeeder, 4-fold gravimetric dosing system. (Ref. No. G27615.2)

Qty. 1 Second-hand cast house for billet production incl. filtration system Mfc.: Gautschi, Mechatherm, Weishaupt, PEHAKA, FISONS, Dantherm Filtration GmbH Built: Unknown The machine is very strong design and still running well because it has been maintained always with original spare parts and qualified experts. Direct casting on a vertical table and make billets of 6'' and 8''. To make 9'' the tool of the table can be modified. The vertical caster can work with 9'' by remachining and modifying the tool table. 1 Melting and Tilting furnace GAUTSCHI, Capacity 20 T, Fuel Oil Burners The furnace has an elevator charging machine to load the scrap from the top of the furnace Degassing unit FILD from MECHATHERM England Nitrogen treatment and filtering 1 Vertical caster for billets 26 x 6’’ and 20 x 8’’ for useful log length 6 m 1 Homogenizing furnace, Fuel Oil Burners Weish ...

Qty. 1 Second-hand Copper Strip Production Plant – Still in Production Mfc.: J. F. Norton, Shinkwang Tech, Partec, Rozai, Chungwon Control & Sunil, Handuck R-FECO, Mirae Tech Inc., Changjo, Wuishi, Youngchang Machinery, Dongshin Tech., Sonoda Engineering Co., Wuxi Longar Mach., Backsan Machinery, Youngdong Coil Center, Deakwang Machinery, Hanguk E.N.G, Built: 1962, 1965, 1990. 2000, 2001, 2008, 2017, 2018, 2019, 2020 Revamping: 2017, 2019, 2020, Scope of supply: Roughing Mill Mfc.: Famer Norton Type: 4-Hi Irreversible – WR Drive 318 x 610 x 635 mm Built: 1965. 06 Revamping: 2017. 09 by Shinkwang Tech Strip width: 200 – 530 mm Thickness: 3.0 – 12 mm Intermidiate Mill Mfc.: Shinkwang Tech Type: 4-Hi Irreversible, WR Drive - 225 x 570 x 720 mm Built: 2017. 06 Revamping: 2020 by Partec Strip Width: 200 – 650 mm Thickness: 0.8 – 5.0 mm Finishing Mill ...

CoEx plate system net. 1350x1-10 mm Material: PE, PS, HIPS, ABS / Details: Main extruder RH EH2400-1-150-33V, co-extruder RH 121-1-50-30V, vacuum pump, CoEx-block, double hydr. Sieve changer with hydr. Station, wide-slit nozzle 1,450 mm, 3-roller smoothing unit RH GK-1600-60-G1 1,640 x 600 mm, Kelvi Plast temperature control unit, cooling section, side strip trim with knife beam, rubber roller extractor RH AT160-20, guillotine RAS 83.20, vacuum conveyor, CoEx dryer material, stacking device. (Ref-No. T27614)

Availability: immediately Location: near Dresden 1 apricot system (temperature control to + 95°C) - Working width approx. 800mm - Overall length approx. 2000mm - Working height approx. 870mm +/- 50mm with stainless handlebars.- Brake castors - Stainless steel frame construction in stainless steel 1.4301 – glass bead blasted - Conical drip plates – return flow apricot tub - Round cord belt transport 2-part with belt stripping in the return - Drive.- Deflection waves stainless steel 1.4301 with driven transfer shaft - Drive station SEW (7-20m/min.) - Stainless chassis with mounted apricot tray approx. 80 Lt. version double-walled with thermal oil filling and electric resistance heating. (Pre-tempering to approx. 60º C). Level query with acoustic signaling. - Product delivery via OMAC rotary lobe pump with downstream instantaneous water heater (electrically for tempe ...

Compounding plant Material: PE, PP, PS, WPC + fillers / Details: segmented screws and cylinders, three-phase motor 250 kW, dcrunner, screw speed: 300 rpm, degassing, 2x busch vacuum pump, side feeding Berstorff ZSFE 120 SO, metal separator, noise protection hood, ECON air granulating system ELG 3000, control: SIEMENS S7 with visualization. Up for a surcharge: extension to 40D possible

A Complete Turnkey Solution: ‘FIVES DMS Montbard & SMS MANNESMANN MEER’ 8" Seamless Tube Plant Once known as Vallourec Bearing Tubes Montbard, this facility can produce hot and cold rolled seamless high precision tubes up to 203 mm OD and 2 to 55 mm wall thickness based on a long-established state-of-the-art manufacturing process. Make (main): · FIVES DMS MONTBARD · SMS MANNESMANN MEER Mothballed since: 2025 Capacity: 80,000 tons per year Processed material: CrMo, CrMn alloyed steels Starting material: 80 – 240 mm round billets End products: o Hot Rolled Tubes up to 203 mm OD; 8.0 - 53 mm WT o Cold Rolled Tubes 25 - 102 mm OD; 2.0 - 20 mm WT Consists of: Billet Yard Hot Rolling Mill incl. Furnaces, Piercer, Elongation, Calibration, Sizing mill, Cooling bed (7) Cold Pilger Mills Heat Treatment Furnaces incl. Quenching ...

Compounding plant for fiberglass contaminant PE/PP Snail/LD 70/38 Material: PE, PP // Extruder with high-wear process unit (HIP), segmented screws and cylinders of 70 mm / 40D, AC-motor 260 kW,, degassing, continuous rotor, vacuum pump, pressure transducer, 4-fold dosing, 3+1-fold gravimetric dosing, side-dose PSF 46, strand head, water bath, strand granulator, temperature control unit, water cooler, material conveyer, Siemens S7 central control with visualization

Qty. 1 Second-hand vertical electrostatic powder painting line for Aluminium profiles – still in production Mfc.: SAT, GEMA, Siemens Built: 2017 Type: vertical powder coating line Profile dimensions: 7000 x 100 x 200 mm - H x W x L Weight of profiles: 30 kg/each max. Max. productivity: 676 pcs/h Conveyor speed: 1.5 m/min. Hanging pitches: 66, 100, 133, 200 mm Total electric power: 215 kW, 400 V, 3ph., 50 Hz Total thermal power: 350.000 kcal/h Compressed air – pressure required: 7 bar Water flow rate required: 500 – 1000 L/h Scope of supply: Pre-treatment tunnel Tunnel main tank made from PP Drying oven Curing oven V- shaped painting booth Vacuum cleaning unit Aerial conveyor Control panel

Film recycling and granulation plant Material: PE, PP, // Cascade extruder, snail/LD x 220+150/ x 26D, drives 232 & 99 kW, water separator, hot tee with underwater cooling, only 8,500 operating hours

Material: PE, PP, PS // DC motor: 132 kW, power: approx. 300 - 500 KG/hr, screw 90mm, L/D30, strand nozzle, water bath, strand granulator.

Material: PS, PE, PP, PA, // Details: DC motor 145 kW, screw revolutions: up to 600rpm, screw diameter 70 mm, L/D 32, segmented screws and cylinders, degassing (optional vacuum pump), control: Siemens S7 with visualization. incl. strand nozzle with water bath and strand granulator, motor up to 265kW possible. For extra charge: underwater granulation, or water ring granulation

Material: PE, PP, PS, ABS, / Details: double screw, runner, segmented screws + cylinder, hydraulic. Cassette sieve changer, strand nozzle, 6m water bath, strand granulator, additive dosing. 3-fold degassing (vacuum pump vs. extra charge), For an additional price: dosing system, water ring or underwater granulation.

used wood carburetor Plant Bj 99 with control cabinets and Perkins gas engine, Generator Stamford 670 kVA Plant was only in operation for 6 months also associated wood chip drying plant available

Material: PE, PP, PS, ABS // Details: Screw diameter 2x 50 mm, L/D 32, DC motor 52 kW, Runner, segmented screws and cylinders, degassing, vacuum pump, screw speed: 400 rpm, strand nozzle, water bath, strand granulator. Power: approx. 150 - 250 KG/hr.

Grease baking device Jufeba TK-2000 -Fat baking device Jufeba -Type: TK 2000 -20 kW -Outside mass: 198x91cm -Basin inside mass: 194x87cm

Material: PE, PP, PS, ABS + talc, fibers / Details: twin-screw extruder PLAMA ZSP 70, segmented screws and cylinders, DC motor 260 kW, degassing, vacuum pump, side feed, low temperature control unit SINGLE, 4+1 gravimetric dosing BRABENDER incl. working platform, screen changer GNEUSS RSF 150, start-up crossover, underwater granulation GALA MAP6 with cutting rotor, water system, heat exchanger, centrifugal dryer. Controls: SIEMENS S7 with screen visualization SIEMENS Multi Panel 270B Touch. Power: approx. 600 - 800 KG/hr

Material: PE, PP, PS, ABS / Details: three-phase motor 215 kW, segmented screws and cylinders, continuous rotors, screw diameter 50 mm, L/D 40, power: approx. 400 - 800 KG/hr, degassing, SIHI vacuum pump, gravimetric belt scale K-Tron WF 300 with stubble, strand nozzle, continuous cooling belt, cooling tank, squid granulator Scheer SGS 100, moisture measuring unit, control unit Siemens S7 with visualization.

Compounding system with GALA underwater granulation Material: PE, PP, PS, ABS // Details: segmented screws and cylinders, screw diameter 2x 40 mm, L/D 44, DC rotor, DC motor 104 kW with gearbox, worm speed: max. 1,200 rpm, 2-fold degassing, ground pressure transducer, start-up valve, water box, Gala A1PAC6 underwater granulation with water circulation system and centrifugal dryer, temperature control unit SINGLE STW 150/1-6-100-NS/E, 6-fachimetric dosing incl. control. Control: Macromatex. Power: approx. 200 - 400 KG/hr

Grease baking device Roka plant Tippfix Model DA 900 -14.4 kW -Outside mass: 80x204cm -Basin indoor mass: 70x194cm

Residual item material from inventory sale for solar free-surface plant Screws, nuts, cable clips, washers, mid and end terminal profiles Package price

Quality Used Power Plant with two (2) Solar Centaur 40, 3.0 MW, (Each), 13,800v 60 Hz. Enclosed. Equipment Description Complete power plant with 2 turbine generator systems. Everything included The equipment has very little hours since installation. They will need to be moved off the site. They are located in The USA. They were overhauled in 2020 installed and never used. The following is included: Control Panels, New Square D Switchgear, 15kv, 1200 amp. for synchronizing the generators to each other and the grid. Grid protection hardware and software. Inlet system with filter cleaning system New control system Exhaust system complete New Oil coolers Gearboxes have been overhauled Generator ends have less than 800 hours on them, one is new 0.0 hours A control room enclosure complete with all control switches New battery chargers

Complete LVL Plant Don't hesitate to keep in touch with us for further information.

Complete Particleboard Plant Don't hesitate to keep in touch with us for further information.

Bread-long wrapper Sw&P BM 51-5 -Length 326cm -Bandwidth 60cm -400 volts -Roll width: 32cm

We are pleased to present our complete commercial and technical offer for an unused 2 × 750 MW Combined Cycle Gas Turbine (CCGT) Power Plant, based on GE Frame 9FA technology, supplied, installed, but not commissioned. The plant equipment is available as a complete package, including major equipment, auxiliaries, and Balance of Plant (BOP). 1. Plant Configuration Overview Total Configuration: • 2 × GE Frame 9FA Gas Turbines • 2 × CMI Triple Pressure HRSG • 1 × GE Steam Turbine • Combined Cycle Output: ~750 MW per block Status: • Installed / partially installed • Not commissioned • Units have never been fired or operated 2. Gas Turbine Island Gas Turbines • Quantity: 2 Units • Manufacturer: GE • Model: Frame 9FA +e DLN2+ • Fuel: Dual Fuel • Frequency: 50 Hz • Site Rated Output: 241,000 kW per unit • Year of Manufacture / De ...

Year of manufacture 1997

Make: oli Spezialanlagen Type: 210V/U Year of Make: 2021 Serial No.: 0020544 Height: 3.14 m Length: 8.77 m Width: 4.49 m Weight: approx. 3000 kg Infeed height: 950 mm +/- 50 mm Spout height: 950 mm +/- 50 mm Magazine capacity: approx. 1800 mm Control and accumulation distance on the infeed conveyor: 1.30 m Format-dependent output: max. 120 bottles/min. Case erector/sealer: Fabr.: oli Spezialanlagen Type: AV-T/U Year of Make: 2021 Core Ø: 76 mm Roller Ø: max. 450 mm Roll width: max. 50 mm The end-of-line packaging line consists of the following main assemblies: • Turning station • Shunting oli 210 V/U • Setting packaging machine olimat AV-T/U • Capper module Technical equipment • Control panel 12" • 3 colors signal traffic light • Jam protection • Driven side conveyor belts • Servo-motor transverse thrust • Servo-motor extension u ...

Packaging plant Technical data • Conveyor belts: 4 • Conveyor belts Length (mm): 2570 • Conveyor belts width (mm): 900 • Ewnopack WSU 2200 cutting machine: built in 1995 • Cutting machine cutting length (mm): 1400 • Strapping device Signode HB 4300: built in 2002 • Strap Signode HB 4300 for: 9 / 10.5 mm plastic tape • Pass-through size strapping device max. (mm): width = 800; Height = 780 • Components all: fully automatic chained