wheel loader used for sale

Mechanical quick coupler Bucket width 1050mm Additional hydraulic function Hydrostatic drive Petrol engine 18 hp - 420cc Hinges black hood broken off New No documents Auction-ID: A1-49340-31

General Description Backhoe loader manufactured by CASE , model 580 SM . Versatile construction machine combining a front loader and rear excavator for digging, trenching, loading and general material-handling applications. Technical Details Manufacturer: CASE Model: 580 SM Machine type: Backhoe loader Year: 2003 Serial number: HJE544882 Operating hours: 9,341 h Engine power: 66 kW Operating weight: 8,700 kg Tyres: Approx. 80% remaining Condition Used industrial condition. Tyres are reported to have approximately 80% remaining tread. Operational status and detailed mechanical and hydraulic condition have not been independently verified. Weight 8,700 kg Auction-ID: A7-49535-3

Brand: Komatsu Type: Backhoe Loader Model: WB93S-5EO Year: 2007 PIN / Serial no.: KMTWB024P77F20155 Power: Engine: Komatsu Diesel Engine power: 74 kW Working parameters: Operating hours: 8,613 h Operating weight: 9,500 kg Equipment: 4x4 drive ROPS/FOPS cabin Air conditioning KOMTRAX telematics system Front loader bucket Rear backhoe bucket Hydraulic stabilizers Auxiliary hydraulics Road lights Tyres: Front 12.5/80-18, Rear 16.9-24 Remarks: Used machine in normal working condition. Shows typical signs of use consistent with age and operating hours. Approximate own mass: 9,500 kg. Auction-ID: A7-48897-38

Mechanical quick coupler Additional function New No CE inspection or registration No documents Auction-ID: A1-49340-25

Technical data Manufacturer: Neuson Machine Type: Skid Steer Loader / Skid Steer Loader Configuration Front bucket Protective cabin with side guards Two joystick controls Front Work Lights Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Auction-ID: A7-49302-152

Brand: Caterpillar (CAT) Type: 428E Backhoe Loader Model: 428E PIN / Serial no.: CAT0428EHSNL03374 Engine: Fuel: Diesel Working parameters: Operating hours: 12,836 h Drive: 4x4 Tyres: Front 12.5/80-18, Rear 18.4-26 Equipment: ROPS/FOPS cabin: Yes Air conditioning: Yes Front loader bucket: Multi-purpose bucket with teeth Backhoe bucket: Digging bucket Loader quick coupler: Mechanical Extending dipper: Yes (E-stick) Hydraulic stabilizers: Yes Auxiliary hydraulics: Yes Road lights: Yes Remarks: Used machine in normal working condition. Shows typical signs of use consistent with age and operating hours. Approximate own mass: 8,900 kg. Approximate dimensions (L × W × H): 5,900 × 2,350 × 3,800 mm. Auction-ID: A7-48897-34

Loading floor : 800x255cm; floor height approx. 80cm; ring towbar; air brakes (operation unknown) ; ramps : 81 cm width: double wheel mount; Auction-ID: A1-47387-276

Category: Skid Steer Loader Manufacturer: Bobcat Model: 873 Serial number: 514222357 Year of manufacture: 2001 Engine power: 54.0 kW Engine speed: 3000 rpm Rated operating capacity: 450 kg Operating weight: 1,737 kg Quick coupler: Bob-Tach hydraulic quick attach Tyres: Pneumatic tyres Cab: ROPS/FOPS operator protection with safety grid Attachments: Bucket with bolt-on cutting edge Remarks: Compact skid steer loader. CE marked. Machine repainted. Bucket fitted with replaceable bolt-on cutting edge. Serial plate and technical data visible. Own mass: Approx. 1,737 kg L x W x H: Approx. 3,31 × 1,68 × 1,94 m Auction-ID: A7-48897-76

Cargo floor size: 9200x2550mm; hydraulic ramps a 500x125cm each; air-braked; leaf feathers; Auction-ID: A1-47387-23

Closed box 1100mm, mechanical change, 3rd function, work light, max load capacity 330kg Auction-ID: A1-47387-104

SAF axles Air suspension 1 self-steering knuckle axle Loading floor length 9 m + 6 m extendable 1.35 m coupling height ABS German Admission HU Tuv 11-2025 Auction-ID: A1-40301-14

Fiat 55-66 agricultural tractor with front loader attachment – fire damage Specifications: Brand: Fiat Type: 55-66 Manufacturer: FIATGEOTECH S.p.A., Modena, Italy Identification number / serial number: 919140 (read from type plate) Fuel: diesel Power: approx. 55 hp (40.5 kW) Engine: 3-cylinder diesel engine, approx. 2.7 litres Front tires: 7.50-16 Rear tyres: 16.9 R30 Length: approx. 3.64 m Width: approx. 1.91–1.93 m Height: approx. 2.31–2.39 m Wheelbase: approx. 2.18 m Own weight: depending on version approx. 2,250–2,925 kg Maximum permissible mass according to type plate: 4,200 kg Features: Front loader attachment frame / front loader console Tires and rims as shown Particularities: Tractor with fire damage, caused by an operating hours counter reading of approx. 6,600 hours. The fire damage is mainly around the driver's seat and engine compartm ...

Longwall board 3750mm long, camera system Complete with charger! Viewing by appointment Auction-ID: A1-40301-7

Manufacturer: SDL Model: 45 Category: Compact wheel loader Year of manufacture: 2025 Serial no.: JYZZJ452508204 Engine Engine power: 15 kW Fuel type: Petrol Working equipment Bucket capacity: 0.18 m³ Loading capacity: 660 lbs (approx. 300 kg) Hydraulic front loader: Yes Operator station Steering: Steering wheel Transmission: Forward / Reverse selector Operator seat: Open operator platform Remarks Unused compact wheel loader in very good condition. Suitable for landscaping, agriculture, construction and material handling applications. Approx. own mass: 650 kg (manufacturer plate: 1,433 lbs) Auction-ID: A7-48897-89

Front loader: Mailleux MX120 hydraulic front loader, mounted on tractor, equipped with double-acting hydraulic lift cylinders and tilt cylinders, spool valves and pipes, quick couplings and implement/attachment frame at the front. The front loader comes from a ts 115 Has already been disassembled Auction-ID: A1-47386-208

Manufacturer: BCT Industrial Model: BCT520 Category: Mini skid steer loader Serial no.: BCT5202026030303 Year of manufacture: 2026 Engine Engine power: 17.2 kW (23 HP) Working equipment Bucket: Included Rated load capacity: 740 kg Hydraulic quick coupling: Yes Hydraulic auxiliary lines: Yes Operator station Operator platform: Walk-behind / standing platform with safety bar Controls: Dual joystick Remarks Unused machine in very good condition. Suitable for landscaping, construction, agriculture and material handling applications. Approx. own mass: 900 kg Auction-ID: A7-48897-90

Sizes: 925cm low part, 420cm high part. Extendable and steered with direction. Auction-ID: A1-47412-55

Working width: approx. 2.00 m (\"2.0\" marking visible on the hitch) Drive: Hydraulic Main brush: roll/cylindrical brush with synthetic bristles Grass collector: yes, built-in Emptying of the tank: probably hydraulic Water tank: large top-mounted polyethylene tank Tank function: power supply to the sprinkler system to limit dust during sweeping Connection: visible hydraulic hoses Hitch: adapter frame for carrier Construction: mechanically welded steel frame Use: cleaning yards, parking lots, roads, industrial areas, warehouses and construction sites Color: orange/black Auction-ID: A3-46151-35956

-4WD -Hydraulic quick coupler -Additional function -Hammer lines at the rear -New -No documents Auction-ID: A1-49340-27

Equipped with pick-up 180 cm; control box; hydraulic drawbar; hydraulic brakes; load sensing; electric control; Forced steered rear axle; leaf feathers; floor chain; lock up was overhauled in 2026 (teeth, bearings etc.); 33 knives; Auction-ID: A1-47386-44

Manufacturer: DELANO Model: S360 Category: Mini skid steer loader with hydraulic breaker Year of manufacture: 2026 Serial no.: DLN2026010008 Engine Engine power: 18 HP (approx. 13.2 kW) Fuel: Petrol Starting system: Electric start Working equipment Hydraulic breaker: Included Quick coupling: Yes Auxiliary hydraulics: Yes Max. lifting capacity: 700 kg Bucket capacity: 0.12 m³ Operator station Controls: Twin joystick controls Drive: 4-wheel drive Noise level: 95 dB(A) Remarks Unused machine in very good condition. Compact skid steer loader supplied with hydraulic breaker, suitable for demolition, landscaping, trenching and construction applications. Approx. own mass: 600 kg Auction-ID: A7-48897-88

jpc crawler skid model ht360, lifting height 2450 mm, equipped with auxiliary systems for hammer and accessories, never used Overall dimensions: 2200 x 1150 x 1390 mm Weight: 360 kg Auction-ID: A7-49514-163

Brand: Newrick Model: ZW480 Type: Skid Steer Loader (mini tracked steer loader) Manufacturer: Shandong Newrick Engineering Machinery Co., Ltd. Production date: June 2025 Serial Number (PIN): NEW202506161 CE marking: Yes Power: 10 kW (approx. 13.4 hp) Auction-ID: A3-46146-11252

Equipped with 4-Cil. \"Köhler\" diesel engine; 57hp; Payload 794 kg; hydraulic function; joy stick operation; Auction-ID: A1-47387-117

-Bucket width : 1000mm -Mechanical quick coupler -Additional hydraulic functions -Hydrostatic drive -Driver platform -Petrol engine with 13hp -Is new with 790 hours on the odometer because the ignition has remained on. -No documents Auction-ID: A3-46151-30289

-Mechanical quick coupler -Additional function -New -No CE -No documents Auction-ID: A1-49340-26

Category: Skid steer loader Manufacturer: Gehl Model: 3635 Power: 27.1 kW (36.3 HP) Year / Manufacturer: 2001 / Gehl Company, USA Serial number: SM01K000465 Operating hours: 2,946.6 h Rated operating capacity: 476 kg Bucket: General purpose bucket Tyres: Pneumatic tyres Engine: Yanmar 3TNE84 diesel engine Remarks: Open ROPS/FOPS operator station, auxiliary hydraulic lines, manual quick coupler, machine sold as shown in the pictures. Own mass: Approx. 1,973 kg Auction-ID: A7-48897-103

Technical data Manufacturer: Sampierana S.p.A. Brand: Eurocomach Type: ESK 150.4 Identification number: 15B200 Engine power: 44.7 kW Permissible total weight: 4,500 kg Permissible axle load 1st axle: 2,900 kg Permissible axle load 2nd axle: 2,550 kg Configuration Skid steer loader with hydraulic lifting arms Loading bucket with teeth Separate fork carriage with pallet forks Protective cabin with mesh elements Joystick operation Solid rubber tyres with perforated tread Auction-ID: A7-49302-155

Magazine Loader This device is located at the beginning of the SMT line. It transfers printed circuit boards (PCBs) stacked in a magazine rack to the downstream machine one by one using a pneumatic slider. Touch Screen (Control Panel) Controlled by PLC (Programmable Logic Control) SMEMA Interface Auction-ID: A7-49816-133

Brand: Bobcat Model: 533 Working parameters: Type: Skid steer loader Operator station: Open cab with ROPS/FOPS safety frame Bucket: General purpose bucket with bolt-on teeth Drive: 4-wheel skid steer drive Tyres: 27x8.50-15 NHS Included equipment: General purpose bucket with teeth Mechanical quick attachment system Auxiliary hydraulic connections Compliance: ROPS/FOPS operator protection Remarks: Used machine in normal working condition. Shows typical signs of use consistent with age and operating hours. Data plate and hour meter not visible in the provided photos. Approximate own mass: 1,550 kg. Auction-ID: A7-48897-78

Automatic material conveyor (hopper loader) with 1.2 kW motor, filter cleaning type GS-4mD, item number N01 104 012, 230 V, 1,200 W, integrated suction motor, filter cleaning, stainless steel housing, material inlet Ø 38 mm Auction-ID: A7-49816-113

This low-loader is in perfect working and driving condition. The brakes and air barrels have been renewed, rear suspension double axle renewed, tires ok. Auction-ID: A3-46150-7114

ZJ-380 Mini Skid Steer Loader. This machine is the ideal tool for gardeners, pavers, agricultural use or renovations. Thanks to the tracks, the machine has minimal ground pressure and maximum grip on any terrain (sand, mud, grass). With a width that allows you to maneuver effortlessly through narrow gates and doors, this machine replaces heavy manual work such as wheelbarrowing and shoveling in no time. Model: ZJ-380 (Year of production: 2026)Status: New / Unused Engine: Reliable Chongqing Rato 420cc petrol engine (8.5 kW / approx. 13 hp)Fuel: Unleaded petrolWeight: 730 kg (easy to transport on a standard trailer)Drive: Tracks for optimal grip and stabilityEquipment: Includes ground bucket and extra hydraulic functions on the arm for any other attachments (such as an auger or pallet forks). Auction-ID: A3-46146-10296

Hydraulic quick coupler Additional hydraulic function LED work light Detachable cab Auction-ID: A1-47386-127

SINGLE MAGAZINE LOADER Working height: 950 +/-20 mm Working width: 250 - 510 mm Size: 1400 x 1420 x 1830 mm (WxDxH) Auction-ID: A7-49816-135

-Includes 3 drills -Drill diameters: 200, 300 & 400mm -New Auction-ID: A1-49340-61

General Description Backhoe loader manufactured by JCB , model 4CX . Designed for excavation, loading, trenching and general construction applications. The machine is equipped with a 4-in-1 front bucket, auxiliary hydraulic line and is suitable for a wide range of earthmoving tasks. Technical Details Manufacturer: JCB Model: 4CX Machine type: Backhoe loader Year: 2001 Serial number: SLP4CXFS1E0920112 Engine power: 68.8 kW @ 2,200 rpm Operating weight: 8,475 kg 4-in-1 front opening bucket Auxiliary hydraulic line Condition Used industrial condition. Equipped with auxiliary hydraulics and a multifunction 4-in-1 front bucket. Operational status has not been tested. Dimensions Operating weight: 8,475 kg Auction-ID: A7-48975-15

Automatic bar loading magazine for single spindle automatic lathe / short lathe, new TEST the new DB-EVO bar loader 4 WEEKS, NON-BINDING, FREE OF CHARGE (conditions on request) very high speeds even with profile material Manufacturer: Giovanni Cucchi Machine type: Automatic bar loading magazine for single-spindle / short turning Type: DB-EVO Design: Surface loading magazine or bundle loading magazine diameter range: 20-110mm DB-EVO at a glance: Scope of delivery and optionally orderable functions: - oriented loading of the bar material possible (e.g. edge upwards) - optional feeding of saw cuts and short parts possible - optional - Monitoring and fault diagnosis (touch screen) - Surface magazine - Bundles and other variants possible - automatic loading of short bars - Trays for tools - low power consumption (start/stop function) - Available in versions for 1.5, 1.8, 2.5, 3.3, 4.2 and 6. ...

Bar loading magazine for multi spindle automatic lathe, new Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Type: CMSP/CMSPF Design: Side loader as surface loading magazine or bundle loading magazine CMSP / CMSPF at a glance: Proven technology - in use for decades The material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the machine at any time by unlocking them at the quick release. These magazines do not require bar tubes on the machine and are screwed directly to the machine. It is possible to work in automatic mode as well as in manual mode. The magazine is mounted on rails, so it can be easily disconnected from the machine at any time by the operator by unlocking it on the machine. To change bar diameters, only the clamping slee ...

Manufacturer: Giovanni Cucchi Machine type: Automatic short bar loading magazine for single-spindle / short turning Type: DB-EVO70C Design: Surface loading magazine diameter range: 20-70mm bar length: max. 1500 mm The advantages of DB-EVO barfeeders at a glance: - oriented loading of the bar material possible (e.g. edge upwards) - dry running - no oil flow - significantly reduces vibrations even with material that is not optimally straight due to the unique design of the guide channel - very high speeds even with profile material (e.g. hexagon, square, flat material and special profiles) - short remaining pieces, as no clamping sleeve is used - very short charging time (charging process still during machining) - solid construction - very low wear of the guide channel - external loading - therefore no stop for new bars necessary, low power consumption (start/stop function) Please, contac ...

a palette with 145 kg - 4 pieces new Schleifscheiben D=350mm, 2 pieces used Schleifscheiben with flange, 10x Abrichtrollen. a palette with 319 kg - 4 pieces Schleifscheiben D=400mm uses with flange and an Abrichtrolle.eine palette with 257 kg - 22 pieces Abrichtrollen with flange

Manufacturer PWH Flow capacity 400 m3 hour of bulk material Grit 0 to 30 mm Bulk weight 0.84 to 0.90 to / m3 Water content 18% Heap height 12 meters Operating voltage 380 V Control voltage 220 V Bucket capacity: 100 litres • Number of shovels: 8 pieces • Bulk per minute: 60 • Theoretical power: 360 m3/h • Effective power: 280 m3/h • Bucket wheel diameter: 3.45 m • Circumferential force (wheel): 15,000 N • Cutting speed on the knife: 1.35 m/sec • Removal height (heap height): 12 m • Discharge of the lowered wheel: 11 m • Lifting height on the paddle wheel: 6 m • Lifting speed on the paddle wheel: approx. 3 m/min • Senovice speed on the paddle wheel: approx. 3m/min • Swivel speed: approx. 12 m/min • Angle of rotation of the trolley (suspension): 360 • Angle of rotation of the trolley

Cauldron standing on 4 wheels Manufacturer: Appointed Serial No.: -. Year of construction: 1971 Volume: 150 LTR. Material: 1.4541 In the pressroom: Operating pressure: 5 bar Capacity: 20 LTR. Operating temperature: 158 ° C In the loading space: Content: 150 LTR. Operating temperature: 100 ° C Dimensions: Bowl ø: approx. 540 mm Interior height front: approx. 640 mm Interior height rear: 580 mm L x W x H: 700 x 700 x 1,100 mm (with wheels) Containers with heating jacket with sloping to the spout, tank outer shape rectangular, marbled at top: 1 hinged lid approx. 600 mm diameter with hinge and handle on the front: 1 temperature display 1 valve 1 " 1 spout DN 32 with shut-off valve at the back: Heating valve

4 PCs. measurement and control cabinets with a swivelling frame and others with drawers and shrouds. Inside some with ventilation and with mounting plate. In frame door socket. Side panel with main switch. As Rittal IT units however incl. fittings. Size H/B/T 2000/800/550 The price is per measurement unit.

Robust rotary valve with inlet and outlet diameter 275 mm, drive via gear motor 0.25 kW / 35 UPM. Several identical locks available (Built between 2000 and 2007), very good condition, partly unused.

Gear wheel, crankshaft Part no. 110014 NEW

Gear Deutz 816 NEW Part number: 0405 4284 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Wheel diameter 120 mm Wheel width 60 mm Wheel diametre hole 35 mm

Type 6202RS Thread diameter 8 mm Wheel diameter 43 mm Wheel width 15 mm Total length 40 mm

WHEEL.GEAR.GAER,IDLRJ.W.PUMP