136,085 used machines on RESALE, but how to find them? Machine Search
Power: 360 kW (489.46 hp) Fuel Type: Diesel Dead weight: 20,800 kg Maximum load capacity: 5,200 kg Axle configuration: 6x4 Color: Red Equipment: HIAB 288 HYDRAULIC LIFT, RAILWAY UNDERCARRIAGE
Key data: 46 mm, 3250 mm
Year of construction 2014 Single-channel charging magazine with Vulkollan channel Remnant output into the machine room Servo drive Glass wrapping and axial displacement 1 guide channel set Vulkollan up to max. LW 46 mm incl. material slider with high-performance oil flow PLC control, integrated terminal with touch screen Manually adjustable material separation Loading area: 3250 x 370 mm Good condition
Max. bar length: 1400mm, bar diameter: 6.35-80mm, weight: 450kg, accessories: cabling, servo amp, bar pusher 52D=12, bar pusher 52D=15, bar pusher 52D=21, with delivery note, copy of the invoice, various manuals, operating and maintenance instructions. An on-site inspection is possible.
Bar diameter range: 10mm-65mm, max. bar length: 3200mm, feed force: 550N, machine weight: approx. 2800kg, operating hours: approx. 60000h. Documentation available. An on-site inspection is possible.
Max. bar length: 3200mm, remnant length: 500mm, feed speed: up to approx. 700mm/s, return speed: approx. 700mm/s, power consumption: approx. 1.5kW, with wiring diagram. A special feature is that the loader advances the bar to the desired length and does not require a machine stop. The remnant is also discharged from the machine into the loader remnant container. An on-site inspection is possible.
Not tested; Auction-ID: A1-49242-214
ID3804 Merlo Roto 38.16 year/Baujahr 2010 9.670 hours/hours 12 t Incl. bucket, fork, and work platform incl. shovel, fork and work basket
A diesel side loader from the manufacturer Bulmor (formerly Jumbo) is available. Load capacity: 7000kg, load center: 700mm, lifting height: 4500mm, mast type: duplex, free lift: 1540mm, engine power: 74.5kW. Machine dimensions X/Y/Z: approx. 2250mm/5000mm/3000mm, weight: approx. 11000kg, operating hours: approx. 22300h. An on-site inspection is possible.
A Iemca loader and an ILS unloader are available. 1) Iemca VIP80-E short bar loader, material passage: 80mm, bar length range: 210mm-1615mm, max. magazine load capacity: 250kg, magazine width: 650mm, feed rate: 1200mm/s, machine dimensions X/Y/Z: approx. 2300mm/1200mm/1400mm, weight: approx. 550kg. 2) Irco ILS-Rex 7208 workpiece unloader, year of manufacture: 2008, max. workpiece diameter: 80mm, workpiece length range: 100mm-800mm. Documentation available. An on-site inspection is possible.
-Quick coupler suitable for skid steer loaders -Cutting width 1460mm -New Auction-ID: A3-46187-30308
Auction-ID: A3-46186-17232
In fully functional condition. With registration certificate Auction-ID: A3-46186-17233
An automatic bar feeder with bundle magazine for multi-spindle automatic lathes is available. Round material diameter range: 4mm-45mm, square material side length range: 4mm-36mm, max. bar length: 4200mm, working height range: 1030mm-1430mm, max. bar weight: approx. 90kg. Machine dimensions X/Y/Z: approx. 4600mm/1100mm/1300mm, weight: approx. 1400kg. Documentation available. An on-site inspection is possible. Expected to be available from the end of September 2026.
it was fitted to Biglia B620 (with spindle length of 1150 mm) - 71 mm guide channels - 70,5 mm bar pusher - 9 bushings (6-20-26-28-32-42-46-52-58 mm)
Manufacturer: PROFIMAT Model: 65.8/270.8 Year of Manufacture: 2007 Type of Machine :Bar Feeder Voltage: 400 V Frequency: 50/60 Hz Power: 2 kW Technical Specifications - Bar capacity range: 65.8 mm minimum to 270.8 mm maximum diameter - Drive system: Servo drive - Type series: Multi-channel bar loading magazine Find more here - .ucymachines/ Contact us at - sales@ucymachines
A KFT bar feeder is offered. Bar diameter: approx. 15mm, Bar length range: approx. 150mm/1215mm, Magazine width: approx. 600mm, Material change time: approx. 18-25s, Alignment accuracy: +/-0.5mm. Machine dimensions: approx. 3000mm/750mm/1500mm, Weight: approx. 250kg. Inspection possible by appointment.
Bar diameter 10 – 65 mm Max. rod length 3,000 mm Multi-lane material support
previously attached to Gildemeister TWIN 65 max. bar length 3,300 mm Material Slide Length XLL max. slide outlet 1,670 mm (with shortest intermediate tube) Capacity: Multi-surface magazine 4x400 mm (1600 mm contact surface) incl. guide channels Ø 46 + 66 mm
A Still diesel forklift is available. Payload: 3500kg, max. gross weight: 10000kg, load center: 500mm, load distance: 510mm, engine: Mercedes-Benz OM617, displacement: 3m³, engine power: 46.5kW, wheelbase: 1950mm, mast: duplex, lift height: 3320mm, machine dimensions X/Y/Z: approx. 3950mm/1350mm/2400mm, weight: approx. 5450kg. An on-site inspection is possible.
SHORT ROD AUTOMATIC LOADER IRCO BREUNING ILS – RBK 100 With servo drive Year 2006 Material length: 1200 mm Material diameter from 0 to 5 mm – max. 0 to 102 mm
Komatsu – crawler loader Manufacturer: Komatsu Type: D 45 S 1 Year of manufacture: 1986 3047 h Cab Loading bucket Chain width 400mm Weight: 11t Width: 2750 mm Location: 30900 Hanover-Wedemark Price freely loaded:
Key data: 80 mm, 2100 mm
Short bar loader, max length 2100 mm - min/max diameter 8-80 mm - two kits included : 46-66 mm guide channels / 45-65 mm bar pushers - it was fitted to Tsugami MO8SYE
suitable for lot 1, Auction-ID: A1-49197-4
Nominal lifting capacity: 5000kg Center of gravity distance: 600mm Total lifting height: 3.3m Engine: FORD Transmission: Grazziano
jpc crawler skid model ht360, lifting height 2450 mm, equipped with auxiliary systems for hammer and accessories, never used Overall dimensions: 2200 x 1150 x 1390 mm Weight: 360 kg Auction-ID: A7-49208-404
new tires. works. Auction-ID: A3-46147-22056
Auction-ID: A3-46145-11225
Width 160cm - Height 120cm - Depth 210cm Auction-ID: A3-46146-13159
bar material dia.: max. 85 mm bar length: 3000 / 3500 mm No. 0703 1 used bar feeder TRAUB 3D / E85 / 3000 Z Bar diameter : max. 85 mm Bar length: max. 3000 mm UNPROOFED / As Spare Part The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
-Outrigger legs are included Auction-ID: A3-46145-22004
Equipped with a Volkswagen 4-cylinder diesel engine Auction-ID: A1-48474-28
General Description Backhoe loader manufactured by JCB , model 4CX . Designed for excavation, loading, trenching and general construction applications. The machine is equipped with a 4-in-1 front bucket, auxiliary hydraulic line and is suitable for a wide range of earthmoving tasks. Technical Details Manufacturer: JCB Model: 4CX Machine type: Backhoe loader Year: 2001 Serial number: SLP4CXFS1E0920112 Engine power: 68.8 kW @ 2,200 rpm Operating weight: 8,475 kg 4-in-1 front opening bucket Auxiliary hydraulic line Condition Used industrial condition. Equipped with auxiliary hydraulics and a multifunction 4-in-1 front bucket. Operational status has not been tested. Dimensions Operating weight: 8,475 kg Auction-ID: A7-48975-15
Operation unknown. Auction-ID: A1-41279-4
CAT telescopic loader roof, unused Auction-ID: A7-49326-62
CAT telescopic loader roof, unused Auction-ID: A7-49326-61
Technical data Manufacturer: Neuson Machine Type: Skid Steer Loader / Skid Steer Loader Configuration Front bucket Protective cabin with side guards Two joystick controls Front Work Lights Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Auction-ID: A7-49302-152
CAT telescopic loader roof, unused Auction-ID: A7-49326-60
maximum number of results exceeded
please refine your search
200 € 
