wheel loader used for sale

Equipped with: PTO, lighting, rear front linkage, sirocco cover, windshield, hour reading not controllable Auction-ID: A1-40134-99

Equipped with: 4x hydraulic double-acting valve rear, air system, air brake connection, pressureless return, hydraulic brake valve, Pitonfix drawbar, Auction-ID: A1-40134-17

(PLEASE NOTE! this vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are extra costs involved) Auction-ID: A1-40134-70

Featured; PTO; Hef; (PLEASE NOTE! this vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are extra costs involved) Please note; Roof leaks Auction-ID: A1-40134-374

Equipped with: long boom, sorting grab, outriggers, 4x4 drive, Dutch registration, automatic lubrication, work lights, hydraulic quick coupler, extra hydraulic functions on boom Auction-ID: A1-40134-46

Featured; Air conditioning; Radio (PLEASE NOTE! this vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are extra costs involved) Auction-ID: A1-40134-69

Equipped with: The AHCON roller conveyor is a modular industrial tire conveyor table made of steel with free-running (possibly partly driven) rollers, including wheel lifters on air control. Approximately 3.60 meters long and 65 cm wide, suitable for moving car and light truck wheels up to approximately 800–1200 mm in diameter within a tire assembly line for an ergonomic and efficient workflow. Auction-ID: A1-41992-104

Equipped with 6- Cil. \"Deutz\" diesel engine; 120 hp; 4 x powershift 6 gears; creep gear; PTO: 540/540E/1000/1000E; 4 double-acting rear hydraulic valves; depressurized return; air system; adjustable tow bar; tipper knob; fender control; front linkage with accord stand; front PTO; 1 single working hydraulic valve for; front-loader preparation \"Stoll\"; front loader operation; Auction-ID: A1-40134-50

Equipped with: air brakes, low pressure return, air suspension seat, PTO control on fenders, bonnet lights, high mounted driving lights, suspended cab, 120Amp alternator, stage 5, CCLS pump large capacity, lifting cylinders EDC 90mm, CAT 2/3 quick catch hooks, climate control, joystick 3 buttons RHS, sliding frame coupling 32mm + piton, windshield wiper with rear washer, engine speed management, KL4 sprung front axle, trailer brake valve 2 lines, front linkage, stabilizer rear lifting arms, passenger seat, rotating beacon, center mounted valves NC4MRV (2NC + 2C), multicontroler armrest, automatic PTO 540/540E/1000 + 21 splines, batten, road and work lights, de luxe-pack, dynamic front mudguards, 2 telescopic mirrors, fuel tank 263L, 40Km/h 17x16 economy, radio with bluetooth, 2 electr. Mid mount valves, 8 LED high power lights, . Auction-ID: A1-40134-3

Equipped with: Iveco engine, luxury cab with air conditioning, operating weight: 15075 kg, engine power: 87 kW/2000 rpm, maximum digging depth: 5640 mm, minimum swing radius front: 2482 mm, frame width: 2470 mm, undercarriage width: 2525 mm, transport length: 7772 mm, transport width: 2525 mm, transport height: 3528 mm, bulldozer blade height: 525 mm, travel speed: 33/6.2 km/h, spicer axles, hammer connection, auxiliary hydraulic function, tyres double mount, hose rupture protection, radio, air conditioning, shield, legs, beacon, fixed box 1000mm with teeth. Auction-ID: A1-40134-37

Equipped with milling heads, attachment/mounting parts, gears and other milling material Auction-ID: A1-41992-81

Equipped with 6-Cyl \"Mercedes\" Diesel engine; new type of engine: OM366A turbo; 125 KW; 16 gears; (fast runner); 3 double-acting front hydraulic valves; 3 double-acting rear hydraulic valves; lifting device; lower drawbar; Auction-ID: A1-40134-20

Equipped with: Front loader without bucket (Stoll 30 FZ profiline)PTO speed; 540/750/1000, 6 gears 4 groups high and low, 4 double valves rear, tow bar, Auction-ID: A1-40134-35

Equipped with 6-Cil. \"MwM\" diesel engine; PTO speed:750/1000; 3 double-acting hydraulic valves; hydraulic brake valve; depressurized return; air system; subtract hash; sparboard control; front linkages 1 double-acting front hydraulic valve; working air conditioning; Auction-ID: A1-40134-22

• Fendt Farmer 105 LS Turbomatik • Year of construction: 1981 • Operating hours: approx. 23,017 h • Power: approx. 59 kW • Tractor with front loader • Cabin available • Rear 3-point hitch available • Hydraulic connections available • PTO 540 / 1000 rpm • Vehicle registration document / registration certificate available Auction-ID: 04K-0UB-1

Equipped with: sliding blade, hydraulic quick coupler (Verachtert 213-7706), excavator bucket, work lights, 4x4 drive, Dutch license plate, beacon, extra hydraulic functions on boom Auction-ID: A1-40134-27

Equipped with: French documentation, 9700 hours, recent maintenance carried out, front linkage incomplete, 5.9-liter 6-cylinder, 4WD (4x4), synchronous gearbox, PTO speed: 540/1000 rpm, 30 km/h, three double-acting spool valves with float position, 7-pin plug., is in good condition Auction-ID: A1-40134-73

Equipped with: PTO speed 540/540e/1000, 2 double valves rear, tow bar, Auction-ID: A1-40134-34

(PLEASE NOTE! this vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are extra costs involved) Auction-ID: A1-40134-81

Hilo works badly/not. There is a possibility to view this lot by appointment via: w.vanderveen@troostwijkauctions.com Auction-ID: A1-40134-42

Fiat 1000-1 SDT, year of construction 1975, first registration 07.11.1978 All-wheel drive tractor (DT) in reinforced SDT version 4-cylinder diesel, 5,461 cc, 81 hp at 2400 rpm Operating hours: approx. 8,046 h read Fully functional and ready to drive Manual transmission, robust and maintenance-friendly technology PTO 540 / 1000 rpm Rear hydraulics with three-point hitch available Retrofitted cab with protective frame Front tyres 12.4-28, rear tyres 16.9-38 Used condition with age-related wear and patina Vehicle documents completely available Homologated, maximum speed 30 km/h Self-drive export possible Auction-ID: 04K-07E-1

Equipped with: drawbar, linkage, PTO does not work! , 2x double-acting hydraulic valves, top link, power connection Auction-ID: A1-40134-168

Equipped with PTO shaft 540/1000, PTO manual clutch is fixed, front loader with third function and gearbox (L1150xB850x700 mm), 4x4 working, power steering, lighting needs to be checked. Auction-ID: A1-40134-94

Featured; 6-cylinder long stroke; Tjalma manure intermediate tank 4 cubic meters; 4 Wheel steering; Dogwalk; Pressure change course; Front linkage without control valve Tjalma manure tank type; TZW4500 2018 ; Serial number; XLGTW10400638K99 Auction-ID: A1-40134-14

PTO speed 540/1000 with eco mode 4x double-acting hydraulic valve rear 1x double-acting hydraulic valve front speed 50Km/H equipped with 6.7 liter 6 cylinder diesel engine with 180Hp Auction-ID: A1-40134-24

Please note; Computer failure high-Low and powershift sometimes drop out CAUTION! This vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are additional costs involved) Auction-ID: A1-40134-82

Equipped with: sprayer, front weight, PTO, linkage Auction-ID: A1-40134-167

Year of manufacture estimated 1992 equipped with Lombardini 2 cylinder diesel engine with approximately 18 hp equipped with. New linkage recently replaced flexible coupling weight approximately 505 kilos Auction-ID: A1-40134-364

1X double-acting 1x single-acting hydraulic connection equipped with extra oil tank equipped with English pick-up hook drives properly equipped with Deutz 6 cylinder engine with 90Hp equipped with original Swedish papers / registration PTO speed 540/1000 Auction-ID: A1-40134-135

Conver C430H Mower boat - serial number 175 - Year of construction 2001 - Weight 1800kg Equipped with cutting bar 140cm wide with serrated knives Mitsubishi S4L engine Stove Servo operated Cruise control Trailer equipped with radio remote control for the winch Casco working width 1500cm - racks foldable 2x 50cm - total working width 250cm Auger height adjustable (hydraulically driven) Auction-ID: A1-40134-194

Top serviced JCB Fastrac 4220 with Quicke front loader (Euro mount) Seamless service intervals as the device is on the road in the municipality before and then in the contracting company. Get in and go! Tractor is sold WITHOUT shovel! Auction-ID: A1-45733-18

Equipped with 6-Cil. 912 diesel engine; lower drawbar; 3 double-acting hydraulic valves; depressurized return; PTO brake valve: 540/1000rpm; \"Mailleux\" front loader MX100; hydraulic quick coupler; additional hydraulic function; Adjustable handlebar: Auction-ID: A1-40134-159

Clean Deutz TTV 6190 with GPS/RTK installed on the roof. Good equipment and ready for immediate use. incl. K80 ball & hydraulic top link, compressed air system ec... as can be seen in the pictures. Machine runs smoothly Auction-ID: A1-45733-12

Electronic linkageSuspended cab, Massey Ferguson 6465T3, dyna6, 40km eco, suspended front axle, suspended cab, datatronic 3, isobus, 24+24 gears, climatronic, ccls pump with 2 electric valves, 3rd mechanical. Rotating front fenders. 5400 / 1000 rpm, Rear lifting capacity: ± 7,500 – 8,000 kg, Hydraulic pump: ± 110 l/min Auction-ID: A1-40134-23

Everything works properly. Comes loose with a complete air brake system. Hours reading not readable. Auction-ID: A1-40134-87

Equipped with 6-Cil. \"FIAT\" diesel engine; 160 hp; mechanical transmission; mechanical forward/reverse; 4 gear groups can be shifted 4 times each; PTO: 540/1000 rpm; 3 double-acting hydraulic valves; air system; adjustable tow bar; original \"Fiat\" wheel weights (rear 300 kg / front 80 kg); original \"Fiat\" front weights 10 pieces of 40kg each; roof hatch; front window can be opened; Auction-ID: A1-40134-21

Vehicle data Manufacturer: Toyota Type: 8FBE20T Type: Electric 3 wheel forklift Drive type: Electric Load capacity: 2000 kg Year of manufacture: 2023 Hours: 65 Length: 1988 mm Overall width: 1152 mm Net weight: 3953 kg ISO class: ISO class 2 = 1,000 - 2,500 kg Mast data Mast Type: Triplex Lifting height: 7500 mm Overall height: 3200 mm Free lift: 2650 mm Fork length: 1200 mm Fork width: 120 mm Fork thickness: 35 mm Fork Carriage: 920 mm Motor, Battery & Charger Battery: EXIDE, 2023, 48V, 690Ah, 80 - 100% Description & Optional Equipment Front tyres: Superelastic Front Tire Condition: 80 - 100% Rear tires: Superelastic Rear Tire Condition: 80 - 100% Tech. Condition: New Optical Condition: New Facilities Special equipment: - 3rd valve - 4th valve - Front work lights Rear Combination Light, Flat Rearview Mirror, Rear Blue LED, Mini Lever, Multifunction  ...

Pack of 2 BKT 320/85 R36 agricultural tyres – RT855 Set of 2 BKT agricultural tyres, Agrimax RT855 model. Size: 320/85 R36 (12.4R36 equivalent) Brand: BKT Model: RT855 Type: radial tires, drive wheel Use: tractor / agricultural equipment Tyres designed for mixed field and road use, offering good traction and driving comfort. Auction-ID: A3-43516-33518

Set of 4 Kahn RS-forged alloy wheels designed for Bentley Continental GT. Rim measurements 9.5 x 22 inches with 5x112 bolt pattern. Gloss black finish with machined face, offering a premium and sporty appearance. Includes Continental SportContact 2 tires (265/30 ZR22). Compatible with Bentley Continental GT models from 2003 to 2018. According to information provided by the seller, the tires are new or unused, although they may have slight marks derived from storage or handling. High-quality aftermarket rims, ideal for aesthetic or performance improvement. Auction-ID: A7-45724-2

adjustment drive of the grinding spind.slide:0,0025 - 0,05 mm total power requirement:100 kW adjustment of grinding head slide:150 mm weight of the machine ca.:17 t grinding spindle drive:2 x 37 kW grinding width:30-150 mm peripheral speed:34 m/sec workpiece speeds:60 - 300 mm/Sek. grinding height:70 mm grinding wheel diameter:750 mm grinding tools:750 x 75 x 350 mm grinding wheel turning speeds:870 U/Min. max. workpiece diameter:250 mm

grinding height:-- mm grinding width:220 mm grinding wheel diameter:762 mm total power requirement:90 kW weight of the machine ca.:13 t grinding spindle 1 drive::37 kW grinding spindle 2 drive::37 kW Grinding machine for pre-grinding the connecting rod With 2 replacement spindle motors

workpiece length:350 mm work piece width:150 mm diameter:Tellerradius 200 mm tool taper:M32 x 1,5 spindle diameter:32 mm grinding width:max.450 mm turning speeds:3385 U/min work table::Höhe 1000 mm workpiece height max.:100 mm total power requirement:1,1 kW weight of the machine ca.:300 kg dimensions of the machine ca.:700 x 800 x 1170 mm