129,086 used machines on RESALE, but how to find them? Machine Search
Heavy duty roller, support roller, idler roller, jockey wheel, cast wheel -Support wheel: Cast wheel with spring, solid design -Dimensions: see photos -Total dimensions: 295/170/H880 mm -Weight: 45 kg
BÜHLER Swivel Nether MOZL 45/150 Ex protection 15 kW Bearing regreased and test run carried out Very good condition
Mussana whipped cream machine Stainless whipped cream machine, capacity 4l, can hold up to 4l of cream and can whip up to 90l per hour, stainless 1Ph
Centrifugal pump, water pump, stainless steel pump, food pump, peripheral wheel pump -Manufacturer: SAWA-Schmidhauser, centrifugal pump peripheral wheel pump -Type: F30/50 -Motor: Fig 1.50 kW / 2850 rpm -Dimensions: 480/210/H190 mm -Weight: 30 kg
Rail wheel, flanged wheel, roller, track wheel, wagon wheel, roller -Rail wheel: Flanged wheel with bearing -Wheel: Ø without flange 130 mm, see photos -Hole: Ø 30 mm -Dimensions: see photos -Quantity: 124 rolls available -Price: per piece -Overall dimensions: Ø 160 x 45 mm -Weight: 3.3 kg/pc.
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Receptacle: Perforated shaft cone Ø 62-69 mm / left weight. -Grinding disc: Ø 376 x 30 mm -Total weight: 28 kg
Grinding wheels, grinding wheels, cup wheel, double grinding stand, surface grinding wheel -Grinding wheel: grinding wheel with grooved profile -Outside: Ø 460 mm -Width: 80mm -Receptacle: Ø 203 mm -Total weight: 18.9 kg
Operating Weight: Approx. 7,000 kg Engine: Yuchai YC4DK85-T300, EURO V Power Output: 62.5 kW / 85 HP / 2200 rpm Max Torque: 340 Nm / 1400–1700 rpm Displacement: 3.6 L Hydraulics: Lonking main valve + swing motor Hydraulic Flow: Up to 30 L/min Controls: Hydraulic-electric joysticks Tires: 8.25-16 industrial-grade pneumatic tires Drive: 4-wheel drive (optional locking differential) Max. Travel Speed: 28 km/h Max. Digging Depth: ~3,500 mm (depending on arm config) Cabin: Enclosed with heat and ventilation system Swing Speed: ~9 rpm Attachment Compatibility: Standard bucket + quick coupler; Supports Hammers, Augers, Grapples, etc.
Grinding wheels, grinding wheels, cup wheel, double grinding stand, surface grinding wheel -Grinding wheel: grinding wheel -Outside: Ø 495 mm -Width: 30mm -Receptacle: Ø 203 mm -Total weight: 9.2 kg
axial fan, fan, exhaust, fan wheel, fan blades, fan blades -Fan wheel: fan blades for exhaust fans -Diameter: 900mm -Receptacle: Ø 38 mm -Quantity: 9x fan wheel available -Price per piece -Dimensions: Ø 900 x 85 mm -Weight: 16 kg/pc.
UGB-150 widht: 1435mm rangę diameter : ø600 do ø1500mm maks. distance: 1500mm
Effective diameter: 1000mm, effective height: 450mm, max. load: 900kg, connected load: 7.34kW, turbine power: 5.5kW, impeller diameter: 334mm, throwing blades: 6, discharge speed: 30m/s-70m/s. Machine dimensions X/Y/Z: approx. 3000mm/3000mm/3500mm, weight: approx. 2050kg, operating hours: 2559h. Documentation available. On-site inspection is possible.
Radial fan, chip extraction fan, fan, extraction, chip blower, fan wheel, blower, fan -Fan wheel: for extractor fan -Connection input: Ø 280 mm -Hole: Ø 12 x 33 mm -Dimensions: Ø 340 x 185 mm -Weight: 1.3 kg
Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane -Travel wheel axle: for crane trolley -Type: D=120x320 -Dimensions: see photo technical drawing -Number: 1x axle available -Dimensions: Ø 120 x 320 mm -Weight: 25 kg
max. grinding diameter: 400 mm grinding width: 0 mm max. module: min. module: total power requirement: 3 kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: m Shaver cutter Ø, min./max. 64 - 320 mm Module range 1 - 12 Shaver cutter width, max. 40 mm No. of teeth 13 - 240 Pitch block Ø 73 - 320 mm Speeds of workpiece slide 5 / 20 / 30 / 40 teeth per min. Grinding slide speed 690 rpm Grinding slide Ø 762 mm Grinding wheel swivelling (pressure angle) 5 - 21 ° Grinding slide swivelling (helical angle) 2 x 35 ° Grinding slide adjustment, vertical 240 mm Cutting speed 1 / 0.5 / 0.25 m/min Spindle drive 1.1 kW Total electrical load, approx. 3 kW - 500 V - 50 Hz Weight, approx. 4,200 kg Accessories / Special Features Machine is suitable for grinding internal and external shaver cutters. It is also suitable for master gears as well as cutters for gear shapers. Unfortunat ...
Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane -Travel wheel axle: for crane trolley -Type: D=110x550 -Number: 1x axle available -Dimensions: Ø 110 x 550 mm -Weight: 38.9 kg
Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane -Travel wheel axle: for crane trolley -Type: D=240x545 -Number: 1x axle available -Dimensions: Ø 240 x 545 mm -Weight: 70 kg
Grinding wheel mount, standard flanges, special flanges, grinding wheel flange -Grinding wheel mount: Mounting diameter: Ø 76 mm -Shaft: Perforated shaft cone Ø 45-58 mm -Number: 3x mounting flanges available -Price: per piece -Dimensions: Ø 148 x 55 mm -Weight: 3.9 kg/pc.
x-travel: 0 mm y-travel: 0 mm table length: 600 mm table width: 400 mm total power requirement: 2 kW weight of the machine ca.: 1500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 45-58 mm -Type designation: 407x10-100x127 015 322 0020 -Quantity: 1x mounting flange available -Dimensions total Ø 180 x 105 mm -Weight: 6.5 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø mm -Mounting: Hole shaft cone Ø 40-48 mm -Type designation: not available -Dimensions total Ø 180 x 85 mm -Weight: 6.8 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø mm -Mounting: Hole shaft cone Ø 38-48 mm -Type designation: not available -Dimensions total Ø 180 x 85 mm -Weight: 7,3 kg
max. width of grinding wheel: 50 mm ratio: 0 max. dia. of grinding wheel: 400 mm total power requirement: 3 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: m Pre-Dressing Device for Gear Grinding Wheels The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Kettle diameter 40cm H 35cm with coarse whisks Total price
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 45-59 mm -Type name: 508x10-100x127 / 508x10-80x127 -Dimensions total Ø 190 x 100 mm -Weight: 7.7 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø mm -Mounting: Hole shaft cone Ø 38-49 mm -Type designation: not available -Dimensions total Ø 180 x 85 mm -Weight: 6.6 kg
2x Kettle diameter 32 cm H 20cm with whisk Total price
2x Kettle diameter 32 cm H 20cm with whisk Total price
Wheel Balancing Mandrel JONES - SHIPMAN to suit taper flanges, Model 540, Model 1400, Information about technical data are not binding., Machine available subject to prior sale.
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø mm -Mounting: Hole shaft cone Ø 34-43 mm / M50 -Type designation: not available -Dimensions total Ø 180 x 80 mm -Weight: 7 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø mm -Mounting: Hole shaft cone Ø 46-59 mm / M50 -Type designation: not available -Dimensions total Ø 180 x 80 mm -Weight: 7,1 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 30-39 mm -Type designation: not available -Dimensions total Ø 180 x 75 mm -Weight: 5.9 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 50-60 mm -Type designation: not available -Dimensions total Ø 180 x 90 mm -Weight: 8 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: holder Ø 213 mm -Mounting: Hole shaft cone Ø 56-59 mm -Type designation: not available -Dimensions total Ø 260 x 120 mm -Weight: 14.3 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 49-64 mm -Type designation: not available -Dimensions total Ø 210 x 125 mm -Weight: 10.9 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: holder Ø 163 mm -Mounting: Hole shaft cone Ø 44-54 mm -Type designation: not available -Dimensions total Ø 220 x 85 mm -Weight: 8 kg
TANKER TRUCK LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge fixed height 4,5 m.from floor, Screw length 8.300 mm, The bearings are dust-tight and automatically greased., at the end o ...
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: holder Ø 213 mm -Mounting: Hole shaft cone Ø 44-54 mm -Type designation: not available -Dimensions total Ø 230 x 85 mm -Weight: 10.3 kg
axial fan, fan, extraction, fan wheel, fan blade, fan blades, blade fan impeller -Manufacturer: Multi Wing, wing fan impeller 4-blade fixed pitch -Diameter: 400 mm -Hole: Ø 19 x 40 mm -Quantity: 1x fan wheel available -Dimensions: Ø 400 x 75 mm -Weight: 0.7 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Ø 55 mm, thread M60 see photos -Whetstone: Dorfnerwerk type 5A 100-JOT8-UEH 400 x 40 mm -Transport dimensions: Ø 440 x 85 mm -Weight: 32.6 kg
3-Kanal PU Saugrad / 3-channel PU suction Wheel Heidelberg Saugrad Neuwertig / as new passend für alle Stahl / Heidelberg Anleger ab einer Arbeitsbreite von 56 cm Suitable for all Stahl / Heidelberg feeders with a working width of 56 cm
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Ø 55 mm, thread M60 see photos -Whetstone: Dorfnerwerk type 5A 100-JOT8-UEH 400 x 30 mm -Transport dimensions: Ø 400 x 80 mm -Weight: 28.7 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø47-55 mm, thread M60 see photos -Grindstone: Dorfnerwerk Type 5A 120-JOT8-UEH 400 x 20 mm -Transport dimensions: Ø 430 x 80 mm -Weight: 26.4 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø47-55 mm, thread M60 see photos -Grindstone: 400 x 40 mm, unfortunately without type designation -Transport dimensions: Ø 400 x 85 mm -Weight: 31.1 kg
maximum number of results exceeded
please refine your search
