wh used for sale

Inv. Num. : 8239 Type: WHN 13 CNC Producer: TOS Created: GO 2004 Parameters: Control system: MEFI X-axis travel: 3500 mm Y-axis travel: 2000 mm Travel distances Z-axis: 1200 mm

Inv. Num. : 8206 Type: WHN 13.4B Producer: TOS Created: 1986 Parameters: Control system: Mefi CNC 859 Work table length: 1600 mm Work table width: 1600 mm Maximum spindle speed: 800 1/min X-axis travel: 2000 mm Y-axis travel: 2000 mm W-axis travel: 1250 mm Spindle diameter: 130 mm Machine weight: 32000 kg 2024: Complete replacement of lubricating oil dispensers Spindle bearing repair (new bearings) Replacing the engine with an overhauled engine

The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several motion axles and one automatic tool exchange system and sometimes multiple pallets

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2500 mm z-axis: 1250 mm W-axis (spindle longitudinal): 800 mm : ISO 50 P.D.B : 1800x2500 mm : 12 t : 3000 Hertz : 400 total power requirement: 37 kW weight of the machine ca.: t dimensions of the machine ca.: m ATC 40 positions Safety guarding Coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max diameter of workpiece 1200 mm Max workpiece height 1600 mm Max workpiece weight 1200 kg Number of wheelsxpower 2x 7.5 kw

1 x CNC bench boring machine in cross-bed design Manufacturer: TOS Type WH13 CNC Year of manufacture 1997 Control: TNC 426 Heidenhain 5-axis X-3500 mm Y-2000 mm Z-1250 mm B-800 mm B-360 Degree Table clamping surface: 1600 x 1800 mm Table load: 12 t Spindle diameter: 130 mm Spindle mount: ISO 50 Spindle speed: max. 1500 rpm Condition: Very good. The machine was only used for repair purposes; no contract manufacturing. Spindle hours: 22,054 Program runtime: 15.661

Compressor Make Whispair / Contimeta Model unknown Year unknown Volume/c apacity unknown, but assumingly around 250-300 liter per minute (Conservative number) Pressure 8 bar Tank 100 liters? Details 2 oil free cilinder pumps, a so called silent silent and this in a silence reduced cabinet. Available direct

Used hermetic, self-cleaning centrifuge made by REDA, model: RE150T, capacity: 15.000 liters / hour, new: 1998 Centrifuge serviced. Last service on February 16, 2022.

spindle diameter: 130 mm x-travel: 4000 mm y-travel: 3000 mm z-travel: 2000 mm w-axis: 800 mm table:: 1800 x 2500 table load: 20 t feed range: 4 - 5000 mm/min spindle turning speed range: 10 - 3000 U/min spindle taper ISO: 50 spindle motor: 37 kW rapid traverse: 10 m/min Control: Heidenhain iTNC 530 total power requirement: 70 kW weight: 39 t range L-W-H: 8,5 x 8,6 x 5,5 mm equipped with - CNC control Heidenhein iTNC 530 & handwheel - 60-fold tool changer (ISO 50) - NC rotary table 1800 x 2500mm, 20t - IKZ and external coolant supply 20bar - chip conveyor - spindle support The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three almost identical CNC plastic pipe butt welding machines (mirror welding machines) Hürner are available. Years of construction: 2x 2016 and 1x 2018, working range OD: 40mm-160mm, power: 2.85kW, reduction inserts: 40/50/63/75/90/110/125/140, weight: approx. 80kg. Documentation available. On-site inspection is possible.

Various laboratory devices are available for quality testing in the textile industry. 1) Textile tensile tester Textechno FPA ME, year of manufacture: 2000, max. speed of pull-off clamp: 5000mm/min, clamping dimensions X/Y: 46mm/10mm, clamping pressure 3bar/5bar/8bar: 1200N/2000N/3200N, max. clamping distance: 960mm, force transducer: E 10N/E100N/E1000N, accuracy: +/-1%, machine dimensions X/Y/Z: approx. 885mm/700mm/1730mm, weight: approx. 200kg, control: Textechno Bus. 2) Illuminated table White Screen Normlight, lighting: 3x 36W, machine dimensions X/Y/Z: approx. 1250mm/800mm/850mm. 3) Textile length measuring machine Yuan More YG086, year of manufacture: 2011, measurement: linear yarn density, yarn count: 1-6, frame circumference: 1000mm (+/-1mm), frame speed min./max.: 30r/270r/min, max. yarn frame turns: 9999, yarn traverse stroke: 35mm (+/-0.5mm), single yarn tension range: 0cN-100 ...

Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 820 mm Table surface area : 810 x 450 mm Slide area: 720 x 350 mm Hole in table: 600 x 110 mm Number of strokes: 100 - 1.000 s.p.m. Table height over floor: 1.030 mm Required power: 19,5 kW Weight of machine approx.: 6,8 ton

Pump module to add to VERTIwrap machines for filling liquids (milk, juices, water, etc.). - Specifications depending on customers product (product sample necessary). Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Manufacture: URT Year of Manufacture: 2018 Model: Testing Station Steering Wheel AMG Certification: CE Marked Find more here - / Contact us at -

Manufacturer: URT Model: Steering Wheel Test Station AMG Year of Manufacture: 2019 Electrical Connection: 230V, 50Hz, 20A, 1/N/PE (EU) Pneumatic Pressure: 5 bar Weight: 800 kg Find more here - / Contact us at -

A Troester mixing mill is available. Including strip cooler, year of manufacture: 1993. An on-site inspection is possible.

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2500 mm z-travel: 1600 mm w-axis: 800 mm b-axis: 360 ° table:: 1800 x 2200 table load: 25 t feed range: 10000 mm/min spindle turning speed range: 10 - 3000 U/min spindle taper ISO: 50 spindle motor: 37/46 kW rapid traverse: 10 m/min Control: Heidenhain TNC 640 total power requirement: 70 kW weight: 38 t range L-W-H: 8,5 x 8,6 x 5,5 mm Equipped with: - Heidenhein iTNC 640 CNC control & HR 510 handwheel - HUI 50 automatic milling head - 40-position tool changer (ISO 50) - B-axis in rotary table - Heidenhain optical scales - NC rotary table - Coolant system with paper belt filter, Coolant through Spindle 20bar - Chip conveyor - Heidenhain TS 460 measuring probe - Movable operating platform - Pfannenberg oil cooler - Central lubrication ca 4450h Spindle Hours The data for this ad was created with ModulMWS - the software solution of Logo ...

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2000 mm z-travel: 1250 mm w-axis: 800 mm b-axis: 360 ° table:: 1800 x 2200 spindle turning speed range: 3000 U/min feed range: 4 - 3000 mm/min table load: 12 t spindle taper ISO: 50 spindle motor: 37 kW rapid traverse: 10 m/min Control: Heidenhain iTNC 530 b-axis: 360 ° total power requirement: ca 70 kW weight: 36 t range L-W-H: 8 x 8 x 3,5 m equipped with: - CNC control Heidenhein iTNC 530 & handwheel - clamping table 1800 x 2200mm, 12t -- full B-axis with 360,000 positions - coolant - IKZ 20bar & extern cooling - BLUM TC 60 Taster - without chip conveyor ca 11500 Spindle Hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 5387 Type: WHN 13 A Producer: TOS Created: 1979 Parameters: Control system: Heidenhain TNC 310 Work table length: 1800 mm Work table width: 1800 mm Maximum table load (uniform): 12000 kg Number of axes: 4 pieces X-axis travel: 3510 mm Y-axis travel: 2040 mm Travel distances Z-axis: 1200 mm Mechanical feed length axis W: 800 mm Cone: ISO 50 Spindle diameter: 130 mm Machine height: 4420 mm Machine length: 7334 mm Machine width: 6960 mm Machine weight: 32 t Equipment: Rotary work table Cross arrangement of the beds Retractable work spindle Hydraulic reinforcement of the axles Trapezoidal lead screw Condition 70%

Manufacturer: Falch Model: Wheel Jet 30 2000-8-0-E Type of Machine : HD Water Jet Machine Specifications: - Pressure: 2000 bar - Flow rate: 8 l/min - Power supply: 400V, 63A Included Accessories: - 5 m high-pressure hose (false non-stop) - Safety equipment: suit, apron, helmet Find more here - / Contact us at -

General SKU354T1003 LocationBarneveld MakeChemtech International Ltd Type212W and WH 35F No. CC9816-01 and CC 9816-07 Year of construction1998 Pressure Working pressure40 Bar Working pressure jacket13.8 Bar Main Features MaterialStainless steel Motor7.5 KW Surface1 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) Scraped surface heat exchangercheck Number of stages:2 Heating surface1,03m² Heating surface shell±0,28 Heating surface rotor±0,25m² Capacity 200kg/h Cylinder sizesDia: 152x600mm Max. temperature0-195°C With jacketcheck Rotor can be cooled/heatedcheck Max. temperature0-195°C InletDia: 50mm, 38mm OutletDia: 50mm, 38mm Motor1.1kW, 400/690volt, 1465rpm With post treatment cylindercheck Heating surface±0,5m² Cylinder sizesDia: 280x570mm Motor7,5kW, 400/690Volt, 1430rpm ...

Various machines from a dental laboratory for the processing of dental restorations are available. 1) Grinding and cutting machine (plaster trimmer) Reco GMT 5330, speed: 1500rpm, grinding wheel diameter: 250mm, bore: approx. 15mm. 2) Dental ceramics furnace Vita Inceramat, max. temperature: 1200°C, firing chamber height: approx. 80mm, machine dimensions X/Y/Z: approx. 500mm/400mm/600mm, weight: approx. 25kg. 3) Model drilling unit Whaledent Pindex P-110. 4) Fine blasting device Renfert Basic Duo, operating pressure: 2bar-6bar, blasting medium containers: 2, mixing principle: Venturi, machine dimensions X/Y/Z: approx. 450mm/400mm/300mm, weight: approx. 10kg. Documentation available. A visit on site is possible.

Boring mill Manufacturer: TOS Type: WHQ 13.8 CNC Year of Make: 2000 CNC control: Heidenhain iTNC 530 Completely overhauled in 2022 Report available Travel: X/Y/Z: 3,500 x 2,500 x 1,250 mm Table length: 2,200 mm Table width: 1,800 mm Max. workpiece weight: 1,200 kg Spindle Ø: 130 mm Spindle speed max.: 3,000 rpm Spindle motor power: 37 kW Dimensions: LxWxH approx.: 7,500 x 6,950 x 4,000 mm Weight: 40 tons.

Vernier caliper, caliper, vernier caliper -Measuring range: 0-300 mm - Fine-tuning -for internal measurements Price: per piece -Quantity: 2 available -Weight: 0.7 kg

Dimensions (L/W/H): 420x570x370 mm Weight: 12 kg Total power requirement: 0,85 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade diameter: 630mm, max. material diameter: 200mm, max. material dimensions X/Y: 185mm/185mm, cutting speed: 170m/min, min. cutting range: 25mm, max. saw carriage stroke: 242mm, max. saw carriage feed: 650mm/min, max. saw carriage rapid return: 5m/min, saw blade clamping flange diameter: 160mm, clamping force vertical/horizontal: 52kN/12kN, section clamping stroke: 520mm, section length range: 25mm-1000mm, working height: 800mm. Documentation available. On-site inspection is possible.

Offer 25425 Technical data - Motorized upper roller 175 x 30 mm - Continuous lower rollers 250 x 50 mm - Upper roller can be delivered by handwheel - Top roller diameter 175 mm - Lower roller diameter 250 mm each - Projection 1100 mm - Distance base plate – lower roller 1520 mm - Drive 400 V - Space requirement approx. W 900 x H 2650 x D 2000 mm - Weight approx. 1500 kg

1 numbering stamp

Whirlpool Vessel, fitted with stainless steel hinged lid. Approx. 2000Litres Tangential inlet with 1.5" RJT male inlet point. Three separate take off points with 1.5" RJT male butterfly valves. Insulated and clad in fully stainless steel. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

This 5-axis TOS Varnsdorf WHN130 was manufactured in 2007. It features a horizontal boring and milling machine with a table size of 1800 × 1800 mm and a spindle diameter of 130 mm. The machine includes a rotary table and is controlled by an NCT-104 system. Consider the opportunity to buy this TOS Varnsdorf WHN130 boring machine. Contact us for more information.

This 5-axis TOS WHN 13.8 boring machine was manufactured in 1996. It features a working spindle diameter of 130 mm, X-axis travel of 3500 mm, Y-axis travel of 2000 mm, and a Z-axis travel of 1250 mm. The rotary table clamping surface measures 2200 x 1800 mm, supporting a maximum workpiece weight of 12,000 kg. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 machine we have for sale. Contact us for more information.

This 4-axis TOS WHN 13.8 CNC boring machine was manufactured in 1980 and retrofitted in 2001. It features a working spindle diameter of 130 mm, a clamping cone 50 ISO, and a spindle speed of 2500 rpm. The machine supports a table load capacity of 12000 kg and includes SIEMENS motors and drives. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 CNC machine we have for sale. Contact us for more information.

spindle diameter: 150 mm x-travel: 16000 mm y-travel: 3000 mm taper ISO: 50 w-axis: 1200 mm spindle speed:: 2,5-1000 ram: 380x380 mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Unused gear wheel for a Westfalia MSA 200-01-076 skimming separator. Article number: 1166 3447 020. For a 50 Hz driven machine., Type of Machine: Gear Wheel, Drive line: 50 Hz, Condition: Never used

Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, circular table saw, circular saw -Manufacturer: White Paisley, table saw on solid base -Motor power: 6.3 kW / 1430 rpm -Saw blade: Ø 550 mm -Max. Cutting height 180 mm -Cutting width: up to 455 mm -Table height: 850 to 1000 mm -Chip extraction: Extraction system can be supplied at an additional cost -Dimensions 1240/1100/H1500 mm -Weight: 762 kg

x-travel: 7000 mm y-travel: 3000 mm z-travel: 1200 mm W-axis (spindle longitudinal): 500 mm spindle diameter: 150 mm quill:: 380 x 380 mm Plate dimensions: 4x 5000 x 2000 mm powered rotary table: 1600 x 1600 table load of rotary table max.: 10 t travel on the bed: 1500 mm tool taper: SK 50 turning speeds: 2,5 - 1000 U/min power capacity - milling spindle: 30 kW dimensions: m weight of the machine ca.: 62 t used manual horizontal borer with plate field - digital scale - tailstock - moveable vertical milling head - movable turn table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter):- mm throat:- mm bore stroke:- mm x-axis:1.800 mm y-axis:1.600 mm z-axis:1.250 mm w-axis:630 mm max. table load:5.000 kg table length:1.400 mm table width:1.600 mm spindle diameter:105 mm spindle turning speed range:3.300 U/min numbers of positions in the tool changer:40 internal coolant system feed:40 bar Splash guard around rotary table Chip Conveyor Oil cooling unit (chiller) Touch probe Renishaw RMP60 Upgrades in 2024 and 2025 Retrofit of X and Z axis ball screws at producer ? KSK Kurim CZ New linear scales Heidenhain in X and Z axis including cabling retrofit of Z axis - new Biplast V lining on guideways, hand scraped Biplast lining on Z axis new TOS Varnsdorf parts for tool clamping and automatic tool changer arm Overhaul of X, Z and Y axis feed motors at authorized Siemens service (new bearings and sensor) New Siemens hand wheel

spindle diameter:221,44 mm x-travel:2.000 mm y-travel:2000 mm z-travel:1.250 mm b-axis:360 ° table-size:1600 x 1800 mm max. workpiece weight:12.000 kg Work spindle:130 mm tool adaptor:SK 50 Tool changer:60 - Fach Ø Flange Hollow Spindle:221,44 mm Max. Ø centering cone:180 mm spindle stroke:800 mm turning speeds:400 ? 1600 U/min feed::bis 8000 U/min Table rotation axis B:1,5 U/min weight of the machine ca.:32 t Control pedestal, electrically height-adjustable approx. 1200 mm, Sawdust Conveyor,

x-travel:3500 mm y-travel:2500 mm z-travel:1250 mm bore spindle speeds:2500 U/min table load:12 t dia. of rotary table:1800 x 2200 mm numbers of positions in the tool changer:60 Lifting operator platform External tool cooling Spindle clamping support

Long link roller chains, transport chain, roller chain, drive chain, drive wheel, sprocket, link chain wheel, conveyor chain wheel -Pitch: 168 mm -Teeth: 8 -Tooth width: 28 mm -Outer diameter: 437 mm -Take: Ø 100 mm -Price: per piece -Number: 5 pieces -Weight: 63.5 kg/piece

Heavy Duty Drive Wheels - Drive Wheels with Hub Groove Wheel diameter 350 mm Wheel width 100 mm Elastik - Solid rubber on cast iron - Wheel centre Axle diameter 65 mm Hub groove width 18 mm Hub groove height 5 mm Hub length 100 mm Weight 19.4 kg 20 units in stock - new - unused - -Unit price-

Chassis, support wheel, swivel wheel -Manufacturer: Jungheinrich, chassis support wheel swivel wheel from pallet stacker type: ERC 205 -Wheel size: 140 x 54 Type GF106-G3 2.0 kW -Dimensions: 240/190/H280 mm -Weight: 16.6 kg

Fendt Farmer 106S all-wheel drive tractor • Built in 1979 • 4-cylinder engine, 48 kW • All-wheel drive • Maximum speed 30 km/h • PTO 540 / 1000 rpm • Cabin available Condition: • Restoration object • No blue smoke • Engine running • Gearbox shifts • No MOT • Heavy signs of wear and rust • Seat badly damaged Auction-ID: 04G-U12-1

4x 10 pieces tyrolit 115x7x22.23 mm aluminum; 10x 10 pieces of sait 115x6x22.23 mm stainless steel; 8x 15 pieces sait 150x6.5x22.23 mm metal; 1x 20pcs power cut 180x7x22.23 mm stainless steel; 1x 4 pieces sait 180x6x22.23 mm metal; 1x 4pcs PS-Forte 230x7.2x22.23 mm stainless steel steel; 3x 10 pieces of sait 125x3.2x22.23 mm stainless steel; 5x 25pcs power grind 230x7.0x22,23 mm stainless steel (not in the picture); 20x 10 pieces of 115x2.5x22.23 mm stone stone;

Long-link roller chains, transport chain, roller chain, drive chain, drive wheel, sprocket, link sprocket, conveyor sprocket -Drive wheel: Conveyor chain wheel with 11 teeth -Division: 100 mm -Disc width: 23 mm -Outer diameter: 380 mm -Hole: Ø 70 x 90 mm -Quantity: 2x sprockets available -Price: per piece -Dimensions: Ø 380 x 90 mm -Weight: 22.3 kg/piece

Long-link roller chains, transport chain, roller chain, drive chain, drive wheel, sprocket, link sprocket, conveyor sprocket -Drive wheel: Conveyor chain wheel with 11 teeth -Division: approximately 100 mm -Disc width: 23 mm -Outer diameter: 380 mm -Hole: Ø 70 x 90 mm with groove -Number: 6x sprockets available -Price: per piece -Dimensions: Ø 380 x 90 mm -Weight: 22.3 kg/piece

Special items deep drawing film Under film white 150 my 432 mm wide 40 rolls a. 500 lfm. = 20,000 lfm Upper foil white 70 my 415 mm wide 40 rolls a. 500 lfm. = 20,000 lfm Roller core: 76 mm suitable for feta cheese packaging or similar Prices on request

Cauldron standing on 4 wheels Manufacturer: Appointed Serial No.: -. Year of construction: 1971 Volume: 150 LTR. Material: 1.4541 In the pressroom: Operating pressure: 5 bar Capacity: 20 LTR. Operating temperature: 158 ° C In the loading space: Content: 150 LTR. Operating temperature: 100 ° C Dimensions: Bowl ø: approx. 540 mm Interior height front: approx. 640 mm Interior height rear: 580 mm L x W x H: 700 x 700 x 1,100 mm (with wheels) Containers with heating jacket with sloping to the spout, tank outer shape rectangular, marbled at top: 1 hinged lid approx. 600 mm diameter with hinge and handle on the front: 1 temperature display 1 valve 1 " 1 spout DN 32 with shut-off valve at the back: Heating valve

a palette with 145 kg - 4 pieces new Schleifscheiben D=350mm, 2 pieces used Schleifscheiben with flange, 10x Abrichtrollen. a palette with 319 kg - 4 pieces Schleifscheiben D=400mm uses with flange and an Abrichtrolle.eine palette with 257 kg - 22 pieces Abrichtrollen with flange

Robust rotary valve with inlet and outlet diameter 275 mm, drive via gear motor 0.25 kW / 35 UPM. Several identical locks available (Built between 2000 and 2007), very good condition, partly unused.