We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,455 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Description: Additional information: Grinding wheel balancing device, manual operation, robust construction, safe, effective, H = approx. Ø 250 mm per wheel, I = approx. 130 mm, dimensions (LWH): 360x100x380 mm weight approx.: 20 kg, Approx. Onsite Dimension. (l x w x h): 360 x 100 x 380 mm
used
Description: Additional information: Grinding wheel balancing device, manual operation, robust construction, safe, effective, H = approx. Ø 140 mm per wheel, I = approx. 90 mm, B = approx. 440 mm, A = approx. 600 mm, D = approx. 640 mm, dimensions (LWH): 440x600x640 mm weight approx.: 70 kg, Approx. Onsite Dimension. (l x w x h): 440 x 600 x 640 mm
used
Description: Additional information: Grinding wheel balancing device, manual operation, robust construction, safe, effective, cast iron devices with a spirit level and 3 adjusting screws Horizontal position of the devices. weight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 650 x 420 x 350 mm
used
Description: Unused Additional Options: Incl. Battery charger Approx. Onsite Dimension. (l x w x h): 1,580 x 600 x 1,200 mm, weight approx.: 107 kg
used
Description: Unused Additional Options: Incl. Battery charger Approx. Onsite Dimension. (l x w x h): 1,580 x 600 x 1,200 mm, weight approx.: 107 kg
used
Description: Electric wheel loader, double engine, 4x4 traction, equipped with bucket, forks and battery charger. Approx. Onsite Dimension. (l x w x h): 2,700 x 900 x 1,600 mm, weight approx.: 1,000 kg
used
Description: Electric wheel loader, double engine, 4x4 traction, equipped with bucket, forks and battery charger. Approx. Onsite Dimension. (l x w x h): 2,700 x 900 x 1,600 mm, weight approx.: 1,000 kg
used
Description: Lot consisting of 2 'Concentration plants': OI 40M concentrator - year 2017 Typical operating conditions: Quantity of water extracted: approximately 20,000 l/h Processing cycle: 10-18 h Concentration ratio: about 5 times Quantity of water processed per cycle: approximately 25,000 l/h Typical operating pressure OI: 25-35 bar Maximum temperature: 50° C The system is substantially composed of: AISI 316 L stainless steel washing tank of approximately 5 quintals Stainless steel preload centrifugal pump complete with three-phase motor 400 V, 50 Hz, power 4.5 kW 1 stainless steel bag safety filter 1 pressurization pump (multi-rotor centrifugal) in stainless steel complete with three-phase motor 400 V, 50 Hz, power 22 kW, regulation with inverter 2 stainless steel recirculation pumps complete with 400V three-phase motor, 50 Hz, 15 kW power, inverter regulation. hyd ...
used
adjustment drive of the grinding spind.slide:0,0025 - 0,05 mm total power requirement:100 kW adjustment of grinding head slide:150 mm weight of the machine ca.:17 t grinding spindle drive:2 x 37 kW grinding width:30-150 mm peripheral speed:34 m/sec workpiece speeds:60 - 300 mm/Sek. grinding height:70 mm grinding wheel diameter:750 mm grinding tools:750 x 75 x 350 mm grinding wheel turning speeds:870 U/Min. max. workpiece diameter:250 mm
used
workpiece length:350 mm work piece width:150 mm diameter:Tellerradius 200 mm tool taper:M32 x 1,5 spindle diameter:32 mm grinding width:max.450 mm turning speeds:3385 U/min work table::Höhe 1000 mm workpiece height max.:100 mm total power requirement:1,1 kW weight of the machine ca.:300 kg dimensions of the machine ca.:700 x 800 x 1170 mm
used
Glue application machine Make: OMMA Type: FSC-1.300 for water-based glues working width: 1.260 mm maximum working thickness: 90 mm working speed: 19 m/min. height of working level: 905 mm application rolls Ø: 185 mm standard grooving lines: 14 inch installed power: 0,5 kW colour: RAL 7035 command side (compared to working direction) right standard voltage: 400 V/50 cycles /3 ph. technical equipment: - rubbered application rolls, coated with grinded surface - thickness graduate indicator - top & bottom glue dosing tanks in grinded steel with ground profile and micrometric glue regulation - parallelism regulation between application rollers - rollers protection with security plate and foot control in front of the machine that stops immediately the machine if activate - security front foot barrier - steel zinc collecting tank of the cleaning water - electr ...
used
Working diameter: 1000mm, working height: 450mm, max. workpiece weight: 900kg, noise level: 78dBA, connected load: 7.34kW, length: 3000mm, width: 3000mm, height: 3500mm, weight: 2.045t, operating hours: 9372h, including documentation, cabin with turntable, manganese lining, blast wheel (radial armouring, ceiling armouring, throwing blades in HM design), sieve, bucket elevator, separator, extraction system cyclone, filter (new filter cartridges installed), control panel electrical system, has been regularly maintained, on-site inspection is possible.
used
Clamping plate, scribing-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 630 mm -Width: 630 mm -Height: 130 mm -Plate thickness: 30 mm -with support ribs -Weight: 121 kg
used
As good as new reversible base jaws Insert: Three-jaw chuck, helical toothing, Manufacturer for example: FORKARDT,RÖHM ,SCHUNK;,SMW-Autoblock Power chuck type on request? Designation of the base jaws FGB-630; FGB630 (FORKARDT) for the construction of commercially available, reversible, hard top jaws Three-jaw wedge rod chuck ø 6300mm: Hand chuck F630, Duro630; THW630 B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La=hole spacing; Za = tooth spacing; S= Groove (top jaw) base jaw W = 65 mm H = 62 mm L = 230 mm N = xx mm S = 24mm La= 82mm Thread M20 Weight approx. 8-10 Kg /piece Price on request:
used
weight max.: 2 x 63 t stroke: 15000 mm clamping width: 20150 mm total power requirement: 115 kW weight of the machine ca.: 45 t dimensions of the machine ca.: 22 x 5 x 2,5 m Double Beam Bridge Crane ABUS ZLK 63t/63t x 20,15 m - with 2 trolleys and 2 ABUS electric wire rope hoists, load capacity 63t each - with scales and radio remote control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Horizontal batch mixer with 630 l. gross content, pneumatic outlet flap (new cylinder), 37 kW engine, Flender gearbox (N2 = 58.58 UPM) and carbide-armoured mixing tools. Workshop overhauled in 2016; very good condition.
used
Horizontal batch mixer with 630 l. gross capacity, pneumatically operated discharge gate (new cylinder), 37 kW drive, Flender gearbox (N2 = 58,58 RPM) and hard metal plated mixing tools. Refurbished in 2016, very good condition.
Ehret Sterilizer ST 637, used, Volume 640 Liter,completely made of stainless steel, Special Design, SPS Control, Process documentation, Temperature +5 to 250 � C Dimensions: W x H x D: 98 x 100 x 68 cm
used
Wittmann Accessories Type: W620M -636, Robot System Control: C61-585 Built: 2003 Dimensions and weights Machine weight Kg: 500 Other Removal X- Axis 300 mm PNE Vertical Y- Axis 1000 mm PNE Horizontal Z-axis 1250 mm MOT
used
used, kpl. 1 year warranty, plate size 630 x 630 mm, 60 plates, open or closed outlet, 30 mm cake thickness, pressure max. 15 bar, capacity approx. 576 liters, filter area 40m2, dimensions 4800 x 1200 x 1200 mm, weight 2.5 tons, motor hydraulics, drip plate, filtrate channel, with or without Filter cloths
used
used, kpl. 1 year warranty, plate size 630 x 630 mm, 45 plates, open outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 350 liters, filter area 28m2, dimensions 4200 x 1100 x 1700 mm, weight 2 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths
used
Kat. No. 11-3320 in a very good condition for Cosmetik and Food Stuff Operating Instructions available For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
used
Material: Stainless steel Built: 1993 Content: 1770 ltr Pressure inside: 0.5bar Pressure outside: 10bar Weight: 5000 kg L x W x H: 4700mm/900mm/1200mm An indirect heat exchanger with mechanical material transport. Very good condition. YOU ARE A NEW, OUTDATED AND USED
used
Material: steel Engine: 75 kW Pin-disk Capasity factor: F=ca. 6,3 Drive: 75 kw Speed: 4900 The machine is as good as new. You can also get the entire system with all components.
used
We offer a general overhault exchange engine with 12-month guarantee with starter+altenator . We are an Agco Sisu diesel service partner and obstruct / sell only original spare parts. Please contact us: MIW GmbH Motoren Instandsetzungs Werk Nord West Ring 8 D-27404 Zeven-Germany Tel:0049 (0) 4281-950583 Fax:0049 (0) 4281-950585 e-mail: info@miw-zeven.de abc. miw-zeven.de
used
used, kpl. 1 year warranty, plate size 630 x 630 mm, 50 plates, closed outlet, 30 mm cake thickness, pressure max. 15 bar, capacity approx. 480 liters, filter area 33m2, dimensions 4300 x 1200 x 1200 mm, weight 2.2 to, motor hydraulics, drip plate, filtrate gutter, with or without filter cloths
used
used, kpl. 1 year warranty, plate size 630 x 630 mm,25 plates, closed outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 200 liters, filter area 16m2, dimensions 3000 x 1200 x 1200 mm, weight 1.5 to, motor hydraulics, drip plate, filtrate gutter, with or without filter cloths
used
used, kpl. 1 year warranty, plate size 630 x 630 mm, 30 plates, open outlet, 25 mm cake thickness, pressure max. 8 bar, capacity approx. 234 liters, filter area 19m2, dimensions 3000 x 1200 x 1600 mm, weight 2 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths, attached compressed air diaphragm pump
used
used, kpl. 1 year warranty, plate size 630 x 630 mm, 45 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 360 liters, filter area 28m2, dimensions 3800 x 1400 x 1600 mm, weight 2.5 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths
used
used, kpl. 1 year warranty, plate size 630 x 630 mm, 40 plates + 40 frame, closed outlet, 40 mm cake thickness, pressure max. 6 bar, capacity approx. 500 liters, filter area 27m2, dimensions 4800 x 1200 x 1600 mm, weight 2.5 tons, hand hydraulics, drip plate, filtrate channel, with or without Filter cloths
used
used, kpl. 1 year warranty, plate size 630 x 630 mm, 40 plates, open outlet, 30 mm cake thickness, pressure 7/15 bar, capacity approx. 384 liters, filter area 17m2, dimensions 4500 x 1200 x 1500 mm, weight 350 kg, motor hydraulics, automatic. Plate transport, drip plate, filtrate channel, with or without filter cloths
used
Fan for dust removal system, mint condition, never used V = 20.000 m³/h PW = kW 26.1
used
Machine spindle for belt drive and direct drive overhauled in 03/03 and no longer used original packing from GMN 2500 U/min serial no. 280217 used, in full function
used
Horizontal grinding optimum surface grinders ELB - 6375 ND - PLC Second-hand machine Surface grinders - horizontal ELB optimal 6375 ND - PLC Second-hand machine overhauled 2016 Surface grinders - horizontal ELB-SCHLIFF optimal 6375 ND - PLC Second-hand machine Grinding length: 600 mm Grinding width: 375 mm Workpiece height: 375 mm Table clamping surface: 600 x 350 mm Grinding wheel dimensions: 300 x 50 mm Grinding spindle motor: 4.7 kW Table speed: 2-30 m / min Grinding wheel speed: 1450 RPM Total power: 12kW Weight approximately: 3.5 t Space requirement approx.: 2.8 x 2.5 x 2.5 m Part overtaken 2016 + 12 months warranty, condition Control with touch screen new Paper machine Magnetic Chuck 600 x 350 Automatic table dressing with compensation 1 flange Items put up Installation / commissioning / transport
new
Dough Sheeter -NEW- - Make: RONDO - Model: SSO-Z 630 - Band width: 633 mm - Roll length: 660 mm - Rollers opening: 3-45 mm - Condition: New - Warranty: 12 month
new
Rated output at 50% ED: 63kVA Short circuit current: 31, 5kA Eletrodenkraft: 100-600daN / EH Projection: 250-550mm --- Control: MPS 10 (5 times, 8-program) --- incl. additional options: -Foot switch "unpowered setting up" -Main switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock
used Handtmann VF 630 vacuum filling machine for filling, portioning, linking, year of construction 2008, with linking device 34-5, for filling, portioning, linking, monitor control, servo drive, loading device, filling capacity 10.200 kg/h, pressure up to 40 bar, up to 700 port./min., portioning range from 5-100,000 gram
used
Tractive effort: 63 to Length: 2000 mm Room set: 3 piece
used
Rotary vane vacuum pump Manufacturer: Leybold Type: SV 630 B and BF Kat. No.: 960863 & 960867 Voltage: 50/60Hz 400V End pressure: 0.8 hpa(mbar) Status: Generalueberholt Gewaehrleistung: 12 months Including: engine restocking, repainting, electric check delivery time: from stock; ready for use
used
Power: 630 kVA / 504 kW Diesel engine (four-stroke) / type / Nr.: / D2842LE201 / 49492832104201 Cylinder: V12 Cooling: water-cooled / E cooler Generator / type / Nr.: Marelli / M8B400SB4B3 / MH16020 Voltage: 400 V / 231 V Frequency: 50 Hz Speed: 1,500 min-1 Type: 20' HC container Tank: approx. 450 LTR. + external diesel intake Switchgear / Starter: Automatic switchgear / electrical Battery voltage / capacity: 24 V Generator switch: Yes Power switch: Yes Automatic: Symap Accessories: - Dimensions (L X W X H): 6.058 x 2.438 x 2.891 mm Weight: 10.000 kg
used
Marposs board 6307473300
used
used
THICKNESS PLANER type SAC SUERI RS 53 S second hand machine CE mark : Yes technical details : useful working width mm. 530 maximum (minimum) working height mm. 300 (3) maximum removal mm. 8 variable feed speed by inverter m / min. 4 ÷ 16 motorized table positioning with electronic reading n.4 knives "Tersa" main motor power Hp 5,5 volt. 380/50
used
Horizontal surface grinding machines ELB - grind optimally 6375 PLC Second-hand machine Second-hand machine excellent condition, hardly used Second-hand machine Grinding length: 600 mm Grinding width: 350 mm Workpiece height: 375 mm Table clamping surface: 600 x 375 mm Grinding wheel dimensions: 300 x 50 mm Grinding spindle motor: 4,5 kW Table speed: 2-30 m / min Grinding wheel speed: 1450 RPM Total power: 18kW Weight approximately: 3.5 t Space requirement approx.: 2.8 x 2.5 x 2.5 m 6 months warranty Paper machine Magnetic Chuck 600 x 350 Automatic dressing device with compensation 1 flange Items put up Installation / commissioning / transport
used
planing width 630 mm planerhe 200 mm, motorized adjustment 4 - Meswser shaft, connection 7.5 kW, weight 1.5 t; unmaintained
used
Rotary vane vacuum pump Manufacturer: Becker Type: U4.630 SA/K o. F/K Vacuum: 3 mbar - 0.5 mbar motor: 15KW Status: used, tested! The general recreation for the Geraet is offered separately! Inclusive: oil filling, vacuum intake filter delivery time: from stock!; ready for use
used
Fine grinding plant consisting of: Alpine 630 AFG fluidized bed counter-jet mill (V ges: 885 dm3, 10 bar pressure-shock-resistant, saerterrad fold-out), feed station, cyclone, 2 pcs. EX-protection valve, control cabinet and 4 pieces of product buckets. Previous use: Grinding of toner. The system can be inspected in a disassembled condition. Available at an additional cost: Dust filter Bühler PGFG 60/18 (39 m2 filter area).
used
Ultra fine grinding plant, consisting of: Fluid bed opposed jet mill Alpine 630 AFG (V total: 885 dm³, 10 bar shock pressure resistant, fold out classifier wheel), cyclone, 2 pcs. EX shutter valves, control cabinet and 4 pcs. product containers. Prior use: Toner production. Plant can be inspected in already dismantled state. Available for an additional charge: Dust filter Buehler PGFG 60/18 (39 m² filtering surface).
used
Part table Eimeldingen S 630 ST with swivel axis
used
Capacity, ton 630 Ram stroke, mm 300 Ram adjustment, mm 220 Number of strokes per minute 15 Table dimensions, mm 1100 x 1500 Slider dimensions, mm 1000 x 1250 Distance between table and slider in its lower and upper adjustment position, mm 650 Ram ejector stroke, mm 100 Capacity of hydro cushion, ton 55 Stroke of hydro cushion, mm 150 Main motor power, kW 55 Press weight, kg 63000