wh 63 used for sale

HBM WHN 13.8 B, new 1986, CNC control system Heidenhain

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2000 mm z-travel: 1250 mm w-axis: 800 mm b-axis: 360 ° spindle turning speed range: 12,5-900 U/min Control: Heidenhain type: 155 table surface area: 1800x1600 mm Table load: 12000 kg spindle taper ISO: 50 width of T-slots: 22 mm T-slot - distance: 160 mm Feed: 1-6000 mm/min table rotating: 360 ° angular milling head: total power requirement: 80 KVA weight of the machine ca.: 36 t dimensions of the machine ca.: 7,7x7,2x4,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several motion axles and one automatic tool exchange system and sometimes multiple pallets

Inv. Num. : 8206 Type: WHN 13.4B Producer: TOS Created: 1986 Parameters: Control system: Mefi CNC 859 Work table length: 1600 mm Work table width: 1600 mm Maximum spindle speed: 800 1/min X-axis travel: 2000 mm Y-axis travel: 2000 mm W-axis travel: 1250 mm Spindle diameter: 130 mm Machine weight: 32000 kg 2024: Complete replacement of lubricating oil dispensers Spindle bearing repair (new bearings) Replacing the engine with an overhauled engine

Inv. Num. : 8239 Type: WHN 13 CNC Producer: TOS Created: GO 2004 Parameters: Control system: MEFI X-axis travel: 3500 mm Y-axis travel: 2000 mm Travel distances Z-axis: 1200 mm

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2500 mm z-axis: 1250 mm W-axis (spindle longitudinal): 800 mm : ISO 50 P.D.B : 1800x2500 mm : 12 t : 3000 Hertz : 400 total power requirement: 37 kW weight of the machine ca.: t dimensions of the machine ca.: m ATC 40 positions Safety guarding Coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max diameter of workpiece 1200 mm Max workpiece height 1600 mm Max workpiece weight 1200 kg Number of wheelsxpower 2x 7.5 kw

1 x CNC bench boring machine in cross-bed design Manufacturer: TOS Type WH13 CNC Year of manufacture 1997 Control: TNC 426 Heidenhain 5-axis X-3500 mm Y-2000 mm Z-1250 mm B-800 mm B-360 Degree Table clamping surface: 1600 x 1800 mm Table load: 12 t Spindle diameter: 130 mm Spindle mount: ISO 50 Spindle speed: max. 1500 rpm Condition: Very good. The machine was only used for repair purposes; no contract manufacturing. Spindle hours: 22,054 Program runtime: 15.661

Compressor Make Whispair / Contimeta Model unknown Year unknown Volume/c apacity unknown, but assumingly around 250-300 liter per minute (Conservative number) Pressure 8 bar Tank 100 liters? Details 2 oil free cilinder pumps, a so called silent silent and this in a silence reduced cabinet. Available direct

Used hermetic, self-cleaning centrifuge made by REDA, model: RE150T, capacity: 15.000 liters / hour, new: 1998 Centrifuge serviced. Last service on February 16, 2022.

DEFUM WHB 150 horizontal boring machine was built in 1984 in Poland by the Dąbrowska Fabryka Obrabiarek DEFUM. The machine is designed for precision machining of heavy workpieces of complex geometry, which are used in a wide range of industries. Thanks to its design and wide machining capabilities, it is ideal for, among others, the machinery, automotive, shipbuilding industries and wherever high accuracy is required. The DEFUM WHB 150 enables a number of complex machining operations to be performed, such as boring, hole drilling and milling. Machining is performed by a spindle with a diameter of 150 mm that ensures maximum accuracy even under heavy loads. The workhead moves in four axes with feeds of 7000 mm (X axis), 3000 mm (Y axis), 1200 (Z axis) and 500 mm (W axis). The installed SONY digital readout, distinguished by its high measurement accuracy, continuously monitors the posi ...

spindle diameter: 130 mm x-travel: 4000 mm y-travel: 3000 mm z-travel: 2000 mm w-axis: 800 mm table:: 1800 x 2500 table load: 20 t feed range: 4 - 5000 mm/min spindle turning speed range: 10 - 3000 U/min spindle taper ISO: 50 spindle motor: 37 kW rapid traverse: 10 m/min Control: Heidenhain iTNC 530 total power requirement: 70 kW weight: 39 t range L-W-H: 8,5 x 8,6 x 5,5 mm equipped with - CNC control Heidenhein iTNC 530 & handwheel - 60-fold tool changer (ISO 50) - NC rotary table 1800 x 2500mm, 20t - IKZ and external coolant supply 20bar - chip conveyor - spindle support The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three almost identical CNC plastic pipe butt welding machines (mirror welding machines) Hürner are available. Years of construction: 2x 2016 and 1x 2018, working range OD: 40mm-160mm, power: 2.85kW, reduction inserts: 40/50/63/75/90/110/125/140, weight: approx. 80kg. Documentation available. On-site inspection is possible.

Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 820 mm Table surface area : 810 x 450 mm Slide area: 720 x 350 mm Hole in table: 600 x 110 mm Number of strokes: 100 - 1.000 s.p.m. Table height over floor: 1.030 mm Required power: 19,5 kW Weight of machine approx.: 6,8 ton

Pump module to add to VERTIwrap machines for filling liquids (milk, juices, water, etc.). - Specifications depending on customers product (product sample necessary). Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Manufacture: URT Year of Manufacture: 2018 Model: Testing Station Steering Wheel AMG Certification: CE Marked Find more here - / Contact us at -

Manufacturer: URT Model: Steering Wheel Test Station AMG Year of Manufacture: 2019 Electrical Connection: 230V, 50Hz, 20A, 1/N/PE (EU) Pneumatic Pressure: 5 bar Weight: 800 kg Find more here - / Contact us at -

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2500 mm z-travel: 1600 mm w-axis: 800 mm b-axis: 360 ° table:: 1800 x 2200 table load: 25 t feed range: 10000 mm/min spindle turning speed range: 10 - 3000 U/min spindle taper ISO: 50 spindle motor: 37/46 kW rapid traverse: 10 m/min Control: Heidenhain TNC 640 total power requirement: 70 kW weight: 38 t range L-W-H: 8,5 x 8,6 x 5,5 mm Equipped with: - Heidenhein iTNC 640 CNC control & HR 510 handwheel - HUI 50 automatic milling head - 40-position tool changer (ISO 50) - B-axis in rotary table - Heidenhain optical scales - NC rotary table - Coolant system with paper belt filter, Coolant through Spindle 20bar - Chip conveyor - Heidenhain TS 460 measuring probe - Movable operating platform - Pfannenberg oil cooler - Central lubrication ca 4450h Spindle Hours The data for this ad was created with ModulMWS - the software solution of Logo ...

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2000 mm z-travel: 1250 mm w-axis: 800 mm b-axis: 360 ° table:: 1800 x 2200 spindle turning speed range: 3000 U/min feed range: 4 - 3000 mm/min table load: 12 t spindle taper ISO: 50 spindle motor: 37 kW rapid traverse: 10 m/min Control: Heidenhain iTNC 530 b-axis: 360 ° total power requirement: ca 70 kW weight: 36 t range L-W-H: 8 x 8 x 3,5 m equipped with: - CNC control Heidenhein iTNC 530 & handwheel - clamping table 1800 x 2200mm, 12t -- full B-axis with 360,000 positions - coolant - IKZ 20bar & extern cooling - BLUM TC 60 Taster - without chip conveyor ca 11500 Spindle Hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Falch Model: Wheel Jet 30 2000-8-0-E Type of Machine : HD Water Jet Machine Specifications: - Pressure: 2000 bar - Flow rate: 8 l/min - Power supply: 400V, 63A Included Accessories: - 5 m high-pressure hose (false non-stop) - Safety equipment: suit, apron, helmet Find more here - / Contact us at -

General SKU354T1003 LocationBarneveld MakeChemtech International Ltd Type212W and WH 35F No. CC9816-01 and CC 9816-07 Year of construction1998 Pressure Working pressure40 Bar Working pressure jacket13.8 Bar Main Features MaterialStainless steel Motor7.5 KW Surface1 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) Scraped surface heat exchangercheck Number of stages:2 Heating surface1,03m² Heating surface shell±0,28 Heating surface rotor±0,25m² Capacity 200kg/h Cylinder sizesDia: 152x600mm Max. temperature0-195°C With jacketcheck Rotor can be cooled/heatedcheck Max. temperature0-195°C InletDia: 50mm, 38mm OutletDia: 50mm, 38mm Motor1.1kW, 400/690volt, 1465rpm With post treatment cylindercheck Heating surface±0,5m² Cylinder sizesDia: 280x570mm Motor7,5kW, 400/690Volt, 1430rpm ...

Boring mill Manufacturer: TOS Type: WHQ 13.8 CNC Year of Make: 2000 CNC control: Heidenhain iTNC 530 Completely overhauled in 2022 Report available Travel: X/Y/Z: 3,500 x 2,500 x 1,250 mm Table length: 2,200 mm Table width: 1,800 mm Max. workpiece weight: 1,200 kg Spindle Ø: 130 mm Spindle speed max.: 3,000 rpm Spindle motor power: 37 kW Dimensions: LxWxH approx.: 7,500 x 6,950 x 4,000 mm Weight: 40 tons.

Dimensions (L/W/H): 420x570x370 mm Weight: 12 kg Total power requirement: 0,85 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25425 Technical data - Motorized upper roller 175 x 30 mm - Continuous lower rollers 250 x 50 mm - Upper roller can be delivered by handwheel - Top roller diameter 175 mm - Lower roller diameter 250 mm each - Projection 1100 mm - Distance base plate – lower roller 1520 mm - Drive 400 V - Space requirement approx. W 900 x H 2650 x D 2000 mm - Weight approx. 1500 kg

1 numbering stamp

Whirlpool Vessel, fitted with stainless steel hinged lid. Approx. 2000Litres Tangential inlet with 1.5" RJT male inlet point. Three separate take off points with 1.5" RJT male butterfly valves. Insulated and clad in fully stainless steel. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

This 5-axis TOS Varnsdorf WHN130 was manufactured in 2007. It features a horizontal boring and milling machine with a table size of 1800 × 1800 mm and a spindle diameter of 130 mm. The machine includes a rotary table and is controlled by an NCT-104 system. Consider the opportunity to buy this TOS Varnsdorf WHN130 boring machine. Contact us for more information.

This 5-axis TOS WHN 13.8 boring machine was manufactured in 1996. It features a working spindle diameter of 130 mm, X-axis travel of 3500 mm, Y-axis travel of 2000 mm, and a Z-axis travel of 1250 mm. The rotary table clamping surface measures 2200 x 1800 mm, supporting a maximum workpiece weight of 12,000 kg. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 machine we have for sale. Contact us for more information.

This 4-axis TOS WHN 13.8 CNC boring machine was manufactured in 1980 and retrofitted in 2001. It features a working spindle diameter of 130 mm, a clamping cone 50 ISO, and a spindle speed of 2500 rpm. The machine supports a table load capacity of 12000 kg and includes SIEMENS motors and drives. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 CNC machine we have for sale. Contact us for more information.

Unused gear wheel for a Westfalia MSA 200-01-076 skimming separator. Article number: 1166 3447 020. For a 50 Hz driven machine., Type of Machine: Gear Wheel, Drive line: 50 Hz, Condition: Never used

Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, circular table saw, circular saw -Manufacturer: White Paisley, table saw on solid base -Motor power: 6.3 kW / 1430 rpm -Saw blade: Ø 550 mm -Max. Cutting height 180 mm -Cutting width: up to 455 mm -Table height: 850 to 1000 mm -Chip extraction: Extraction system can be supplied at an additional cost -Dimensions 1240/1100/H1500 mm -Weight: 762 kg

x-travel: 7000 mm y-travel: 3000 mm z-travel: 1200 mm W-axis (spindle longitudinal): 500 mm spindle diameter: 150 mm quill:: 380 x 380 mm Plate dimensions: 4x 5000 x 2000 mm powered rotary table: 1600 x 1600 table load of rotary table max.: 10 t travel on the bed: 1500 mm tool taper: SK 50 turning speeds: 2,5 - 1000 U/min power capacity - milling spindle: 30 kW dimensions: m weight of the machine ca.: 62 t used manual horizontal borer with plate field - digital scale - tailstock - moveable vertical milling head - movable turn table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 5-axis TOS WHQ 13 CNC boring machine was manufactured in 2013. It features a working spindle diameter of 130 mm, a transverse table travel of 5000 mm, and a table load capacity of 16,000 kg. The machine is equipped with a HEIDENHAIN iTNC530 control system and includes an automatic tool change system. If you are looking to get high-quality boring capabilities, consider the TOS WHQ 13 CNC machine we have for sale. Contact us for further details.

CNC horizontal boring machine Type: WHN 13.8 B Manufacturer: TOS Year: 1987 In 2026 control replacement for Heidenhain TNC 530 X: 3500 mm Y: 2000 mm Z: 1250 mm W: 800 mm Spindle diameter: 130 mm Spindle taper: ISO 50 Table: 1800 x 2200 mm Max table load: 12000 kg Machine weight: 36000 kg In good condition, fully functional Find more here - / Contact us at -

Technical data: X-axis 2,000 mm Y-axis 2,500 mm Z-axis 1,250 mm W-axis 800 mm Spindle power 37 kW Spindle speed 1.6 – 1,500 rpm. Tool holder SK 50 Control CNC HEIDENHAIN TNC415 Table dimensions 1,800 x 1,600 mm max. table load 8 to B-axis 360° Weight approx. 30,000 kg Motor fan new Simodrive modules new 2024 November SK 50 Cone Reground 2024 New cover X axis in 2024 Y scale 2023 overtaken by Heidenhain

CNC horizontal boring machine Type: WHN 13.8 A-CNC Manufacturer: TOS Year: 1979 Overhaul: 2007 Control: Heidenhain TNC 530 Spindle diameter: 130 mm Spindle taper: ISO 50 Main motor power: 37 kW X: 3500 mm Y: 2000 mm Z: 1250 mm W: 800 mm Table: 1800 x 2200 mm Max table load: 12000 kg Machine weight: 36000 kg In good condition, fully functional Find more here - / Contact us at -

Blasting machine Wheelabrator (Czech Republic) HW12-16, year of construction 2021, fir tree plant, interchangeable system

- 1e owner machine - ca 16.000 Spil hours - Chip conveyor - Under power 

bore capacity in steel (diameter):- mm throat:- mm bore stroke:- mm x-axis:1.800 mm y-axis:1.600 mm z-axis:1.250 mm w-axis:630 mm max. table load:5.000 kg table length:1.400 mm table width:1.600 mm spindle diameter:105 mm spindle turning speed range:3.300 U/min numbers of positions in the tool changer:40 internal coolant system feed:40 bar Splash guard around rotary table Chip Conveyor Oil cooling unit (chiller) Touch probe Renishaw RMP60 Upgrades in 2024 and 2025 Retrofit of X and Z axis ball screws at producer ? KSK Kurim CZ New linear scales Heidenhain in X and Z axis including cabling retrofit of Z axis - new Biplast V lining on guideways, hand scraped Biplast lining on Z axis new TOS Varnsdorf parts for tool clamping and automatic tool changer arm Overhaul of X, Z and Y axis feed motors at authorized Siemens service (new bearings and sensor) New Siemens hand wheel

x-travel:3500 mm y-travel:2500 mm z-travel:1250 mm bore spindle speeds:2500 U/min table load:12 t dia. of rotary table:1800 x 2200 mm numbers of positions in the tool changer:60 Lifting operator platform External tool cooling Spindle clamping support

Eccentric shaft for hot forging press K8548 6300T Weight, kg 27 800

Drive gear for hot forging press K8548 6300T Weight, kg 15 700

Driven gear for hot forging press 6300T Weight, kg 1300

Clutch hub for hot forging press K8548 6300T Weight, kg 7100

Several transformers for sale: Here is a 630KVA 20-0.4KV Hermetic Home Converted to plug-in bushings and completely resealed, insulating oil is as good as new due to reprocessing Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) There are 2 identical buildings available We have many more transformers in stock, also some 10,000-1000V transformers are available

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: Schad Sintec, transformer type ISK-ST 630 -Input: 400V / 1.7A / 50-60Hz -Output: 230V / 2.74A / 630VA -Technical data: see photo nameplate -Dimensions: 130/120/H155 mm -Weight: 10.1 kg

Cell wheel lock made of noble steel unused KREISEL Environmental Technology Type: ADG 630 x 800 x 21-24 Z Built: 2005 Inlet opening: approx. 800 x 500 mm Outlet opening: approx. 800 x 500 mm Cell wheel diameter: 630 mm Number of cells: 12 Cell depth: approx. 200 mm Cell wheel made of stainless steel Housing made of steel Geared motor : SEW-EURODRIVE Type :RF107 AR132S/MWEX/II3GD DV132M4/TFII36D 7.5 kW 24 rpm 230/400 V IP65 Motor Ex protected! Total dimensions: approx. 2700 x 800 x 800 mm

Horizontal batch mixer with 630 l. gross content, pneumatic outlet flap (new cylinder), 37 kW engine, Flender gearbox (N2 = 58.58 UPM) and carbide-armoured mixing tools. Workshop overhauled in 2016; very good condition.